Water drainage frame
- Rain water is drained off the module
surface.
- This avoids not only water accumulation, but
also water stains after drying.
- Even in low-angle installations, water
drainage corners keep the module clean.
Power from both sides
- HIT® generates solar electricity
simultaneously on the front and on the back
side.
- This additional amount of light is combined
with the light taken up by the front side of
the module.
Light Capturing Technology
- Clean pyramid structures
on the cell surface helps
more light to be absorbed
by solar cells.
PhotovoltaicmoduleHIT
VBHN240SA11
19.0%
®
Cell Surface
Cell technology
Our cell is made of a thin monocrystalline silicon wafer
surrounded by ultra-thin amorphous silicon layers. This product
offers the industry's leading performance and value, using
state-of-the-art manufacturing techniques. The development of
®
was supported in part by the New Energy and Industrial
the HIT
Technology Development Organization (NEDO).
Quality
Panasonic is truly committed to quality since it began developing
and manufacturing solar PV in 1975. Since pioneering,
developing and launching HIT
technology leader, and for decades many satisfied customers
have placed their trust in the competence in our unique HIT
®
in the 1990s, we have been the
®
.
Special features
The solar modules are 100% emission free, have no moving
parts and produce no noise. The dimensions of the modules
enable a space saving installation and the achievement of
maximum output power possible on a given roof area.
High performance at high temperatures
With its very low temperature coefficient of only -0.30%/°C, our
solar cell can maintain a higher efficiency than a conventional
crystalline silicon solar cell, even at high temperatures.
Cell structure of HIT
Ultra-thin amorphous
silicon layers
Electrodes
Yield comparison
120
100
kWh/kWp)
80
60
40
20
20
normalized output power (
Nagano (Japan), 2012,
facing west-south-west, tilt angle 20°
A
J F M J A S D
M NJ O
c-Si
month
®
Clean surface with minimal loss
773.9
kWh/kWp
approx.
8% more
®
HIT
839.2
kWh/kWp
cummulative yield
“HIT” is a registered trademark of Panasonic Group.
Panasonic Corporation
HIP215NKHA5090209
Cell temperature:25℃
Fig.2
TYPE: HIT Power 215N
ElectricalandMechanicalCharacteristics
N240
Electrical Specifications
Model VBHN240SA11
Rated Power (Pmax)
Maximum Power Voltage (Vpm) 43.7 V
Maximum Power Current (Ipm) 5.51 A
Open Circuit Voltage (Voc) 52.4 V
Short Circuit Current (Isc) 5.85 A
Temperature Coefficient (Pmax)
Temperature Coefficient (Voc)
Temperature Coefficient (Isc)
NOCT
CEC PTC Rating 223.5 W
Cell Efficiency 21.6%
Module Efficiency 19.0%
Watts per Ft.
Maximum System Voltage 600 V
Series Fuse Rating 15 A
Warranted Tolerance (-/+) -0% / +10%
1
240 W
-0.30%/ °C
-0.126 V/ °C
1.76 mA/ °C
118.9°F (48.3°C)
2
17.70 W
Mechanical Specifications
Internal Bypass Diodes 3 Bypass Diodes
Module Area
13.56 Ft
Weight 33.1 Lbs. (15kg)
Dimensions LxWxH 62.2x31.4x1.4 in. (1580x798x35 mm)
Cable Length +Male/-Female 40.55/34.64 in. (1030/880 mm)
Cable Size / Type No. 12 AWG / PV Cable
Connector Type
3
Multi-Contact
Static Wind / Snow Load 50 PSF (2400 Pa)
Pallet Dimensions LxWxH 63.2x32x.65 in. (1607x815x1650 mm)
Quantity per Pallet / Pallet Weight 40 pcs./1388.9 Lbs (630 kg)
Quantity per 40’ Container 560 pcs.
Quantity per 20’ Container 280 pcs.
2
(1.26m2)
®
Type IV (MC4
TM
)
Operating Conditions & Safety Ratings
Ambient Operating Temperature
Hail Safety Impact Velocity 1” hailstone (25mm) at 52 mph (23m/s)
Safety & Rating Certifications UL 1703, cUL, CEC
UL 1703 Fire Classification Type 2
Limited Warranty
1
STC: Cell temp. 25°C, AM1.5, 1000W/m2
2
Monthly average low and high of the installation site.
Note: Specifications and information above may change without notice.
3
Safety locking clip (PV-SSH4) is not supplied with the module.
HIT is a registered trademark of Panasonic Group.
2
-4°F to 104°F (-20°C to 40°C)
10 Years Workmanship, 25 Years Power Output
Dimensions and Weight
φ0.205[φ5.2]
31.4[798]
1.378[35] 15.71[399]
φ0.276[φ7]
34.65[880]
62.2[1580]
30[761.3]
φ0.165[φ4.2]
1.378[35]
0.982[25]
Dependence on Irradiance
6.00
5.00
4.00
3.00
2.00
Current (A)
1.00
0.00
2
1000W/m
2
800W/m
2
600W/m
2
400W/m
2
200W/m
0 10 20 30 40 50 60
Voltage (V)
φ0.165[φ4.2]
13[330]
40.55[1030] 4.5[114]
φ0.205[φ5.2]
CAUTION! Please read the installation manual carefully before using the products.
Please contact
Panasonic Enterprise Solutions Company
■Head Office: 5th Floor Two Riverfront Plaza Newark, NJ 07102
■Mail: HITcustomerservice@us.panasonic.com
http://panasonic.net/ecosolutions/solar
All Rights Reserved © 2015 COPYRIGHT Panasonic Corporation
Specications are subject to change without notice.