PANASONIC TX-32LX500P User Manual

123 456 7

Operating Instructions

Model No.

Wide LCD TV

TX-26LX500P TX-32LX500P

The image shown is for illustration only.

Please read these instructions before operating your set and retain them for future reference.

English

TQB0E0123U-1

Welcome

Dear Panasonic Customer, We hope that you have many years of enjoyment from your new TV. The Quick Start Guide section at the be gin ning of this instruction book will allow you to use the TV as quickly as possible. We recommend that you then read the complete instruction book, and keep it to refer to as you explore the range of advanced features that this LCD TV offers.

Contents

Accessories ................................................................ 2

Warnings and Precautions ......................................... 3

Fitting remote control batteries ................................... 3

Cable cover removal and ﬁ tting .................................. 4

How to open the front cover ....................................... 4

How to use the LCD stand ......................................... 4

Quick Start Guide ....................................................... 5

Basic controls: front panel and remote control ........... 7

Using the On Screen Displays ................................... 8

Picture menu .............................................................. 9

Sound menu ............................................................. 10

Setup menu .............................................................. 11

Tuning menu – overview .......................................... 12

Tuning menu – Programme edit ............................... 13

Adding / deleting a programme channel ................ 13

Moving a programme channel ............................... 13

Tuning a programme channel ................................ 13

Renaming a programme channel .......................... 14

Locking a programme channel .............................. 14

Changing the sound system for a channel ............ 14

Copying programme information to

a recording device ........................................ 14

Tuning menu – Auto setup ........................................ 15

Tuning menu – Manual tuning .................................. 16

Manual tuning (via front panel) ................................ 16

Q-Link ....................................................................... 17

Aspect Controls ........................................................ 18

Multi window ............................................................. 20

PC mode .................................................................. 21

Card operations ........................................................ 23

Still ............................................................................ 30

VCR / DVD operation ............................................... 31

Teletext operation ..................................................... 32

Connections ............................................................. 35

How to connect the Headphones / AV3 terminals . 35

How to connect the Audio Output terminals ......... 36

How to connect the AV1 / 2 / 4 Scart terminals ..... 36

How to connect the Component Input terminals ... 36

How to connect the HDMI Input terminal ............... 37

How to connect the PC Input terminal ................... 38

Troubleshooting ........................................................ 39

Maintenance ............................................................. 40

Scart and S-video terminal information .................... 40

Input signal that can be displayed ............................ 41

Speciﬁ cations ........................................................... 42

Accessories

Check that you have the accessories and items shown

Operating Instructions

Remote Control Transmitter (N2QAKB000060)

123 456 7

89 0

Batteries for the Re mote Control Transmitter (2 × R6 (UM3) size)

Clamper

Pan European Guarantee Card

Warnings and Precautions

• This TV set is designed to operate on AC 220-240 V, 50 / 60 Hz.

• To prevent damage which might result in elec tric shock or ﬁ re, do not expose this TV set to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and ob jects ﬁ lled with liq uid, such as vases, must not be placed on top of or above the TV.

• Keep unneeded small parts and other objects out of the reach of small children. These objects can be accidentally swallowed. Also, be careful about packaging materials and plastic sheets.

• WARNING: HIGH VOLTAGE!!!

Do not remove the rear cover as live parts are

accessible when it is removed. There are no user serviceable parts inside.

Ensure that the mains plug is easily accessible.

• TV Games / Home Computers

Extended use of TV games or home computers with

any television set can cause a ‘shadow’ on the screen. This type of LCD panel phenomenon, can be limited by observing the following points:

• Reduce the brightness and contrast levels to a minimum

viewing level.

• Do not allow a still picture to be displayed for an extended

period, as this can cause a permanent after-image to remain on the LCD TV screen.

• Examples of still pictures include logos, video games,

computer images, teletext and images displayed in 4:3 mode.

• This type of LCD panel damage, is not an operating defect,

and as such is not covered by the Panasonic warranty.

• The On / Off switch on this model does not fully disconnect the TV from the mains supply. Remove the mains plug from the wall socket before connecting or disconnecting any leads, or if the TV set is not used for a prolonged period of time.

Note:

If the set is not switched off when the TV station stops transmitting, it will automatically go to Standby mode after 30 minutes. This function will not operate when the TV is in AV mode.

• Cabinet and LCD panel care

Remove the mains plug from the wall socket. The

cabinet and LCD panel can be cleaned with a soft cloth moistened with mild detergent and water. Do not use solutions containing benzol or petroleum.

• When ambient temperature is cool, the picture may take a short time to reach normal brightness, but this is not a malfunction. (After brief moment, the picture will have normal brightness.)

• Adequate ventilation is essential to prevent failure of electrical components, we recommend that a gap of at least 10 cm is left all around this television receiver even when it is placed inside a cabinet or between shelves.

• Avoid exposing the TV set to direct sunlight and other sources of heat. To prevent ﬁ re, never place any type of candle or naked ﬂ ame on top or near the TV set.

• Ventilation should not be impleded by covering the ventilation openings with items such as newspapers, table cloths and curtains.

Fitting remote control batteries

321

“R6 (UM3)” size

Pull and hold the hook, then open the battery cover.

• Make sure that the batteries are ﬁ tted the correct way round.

• Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately.

• Do not mix different battery types, i.e. Alkaline and Manganese or use rechargeable (Ni-Cad) batteries.

Insert batteries - note correct polarity ( + and -).

Replace the cover.

Cable cover removal and ﬁ tting

Removal

1. Push down hooks and pull the cover slightly towards yourself to disengage the claws (at 3 points).

2. Slowly pull out in the downward direction.

Fitting

Note:

To avoid interference appearing on the screen, do not bundle the RF cable and mains lead together.

1. Insert the claws (at 3 points) at the bottom end.

2. Push until it clicks.

How to open the front cover

How to use the LCD stand

Adjust the LCD panel to your desired angle. The LCD panel can be adjusted the following direction: 20° Right 20° Left

Raise the lower part of the door labeled “PULL”.

(View from the top)

Quick Start Guide

Connection and setting up options

Please ensure that the unit is disconnected from the mains before attaching or disconnecting any leads.

AV1 AV2 AV4

AUDIO

RGB VIDEO

VIDEO S-VIDEO

RGB VIDEO S-VIDEO

COMPONENT

VIDEO

RF cable (Not supplied)

SET TOP BOX

Scart cables (Not supplied)

RF cable (Not supplied)

Connect the mains plug to the wall sock et.

Press the [ ] switch on the TV set to turn the set on.

To switch the TV set to Standby mode, press the

button on the remote control.

The TV set can be switched on by pressing the

button again if it was in Stand by mode.

Note:

This TV will still consume some power as long as the mains plug is still inserted into the wall socket.

VCR / DVD

Recorder

Plug in aerial and connect ancillary equipment.

123 456 789 C0

Power Indicator

Standby : Red

On : No Light

Remote control signal sensor

C.A.T.S. sensor

LCD C.A.T.S. (Contrast Automatic Tracking System) automatically senses the ambient light conditions and adjusts the brightness and gradation accordingly, to optimize contrast. C.A.T.S. is in effect when Viewing mode is set to Auto. See page 9.

Quick Start Guide

Select your country.

For Belgium, Switzerland and E.Eu, select the desired language. If you wish to perform manual tuning, press the Green button. See page 16.

Green

Land

Deutschland Österreich France Italia España Portugal Nederland Danmark Sverige Norge Suomi Belgien Schweiz ELLADA Polska Česká republika Magyarország E.Eu

Press the Red button to start Auto Setup.

Red

CH12

Auto setup will begin, your stations will be located and stored.

If a compatible recording device is connected to the correct Scart ter mi nal, programme data will be down load ed to the device via Q-Link. See page 17.

TV to VCR or DVD Recorder Download

If a “Q-Link”, “NEXTVIEWLINK” or compatible recording device has been connected to a Scart terminal before starting Step 2, programme information will be downloaded to that device.

SuchlaufStart ATP Abbruch

AUTO SETUP IN PROGRESS SEARCHING : PLEASE WAIT

02 78:01 41

Exit

DOWNLOAD IN PROGRESS

Remote control unavailable

123 456 789 C0

PLEASE WAIT

Programme : 63

The programme positions will be downloaded to the recording device, in the same order as stored in the TV. See page 17.

Not all VCRs / DVD Recorders support this download of programme information, some may require to be started manually. Refer to the recording device’s operating instruction book.

If a recording device other than those described above has been connected, then there will be no download operation.

Notes:

• If the recording device has not accepted download data from the TV, you may need to select the Download option from the device’s menu system. Refer to the recording device’s operating instruction book.

• If Q-Link is not operating correctly, check the following:

The Scart cable is connected to the TV’s Scart terminal, AV2 or AV4, and correctly setup in the menu. The Scart cable is connected to the recording device’s compatible (Q-Link, NEXTVIEWLINK or similar

technology) Scart terminal.

The Scart cable is a “fully wired” type.

• For further information on Q-Link and connecting equipment, see page 17, 36, 40.

Basic controls: front panel and remote control

On / Off switch

STR (Normalization store)

Used to store tuning and other function settings.

Standby On / Off button Switches TV On or Off (Standby mode).

Ambience On / Off (see page 10)

ASPECT control button (see page 18, 19)

N (Normalize) button Resets all settings to their default levels.

SD CARD slot

(see page 23)

Headphones jack

(see page 35)

TV/AV button (see page 35)

Increases or decreases the programme position by one. When a function is already displayed, press to increase or decrease the selected function. When in Standby mode, switches TV On.

F (Function select) Displays the On Screen Display functions, use repeatedly to select from the available functions - Volume, Contrast, Brightness, Colour, Sharpness, Tint (in NTSC mode), Bass, Treble, Balance and Tuning mode.

MULTI

SD REC

WINDOW

ASPECT

TV/AV

AV3 terminals

(see page 35)

MULTI WINDOW button (see page 20)

SD Record button (see page 25)

Sound mute On / Off

SD button Access Card operations. (see page 23-30)

PC CARD slot

(see page 23)

PC CARD EJECT button (see page 23)

Press to conﬁ rm selections and choices.

Menu button Press to access the Picture, Sound and Setup menus. (see page 8-11)

Coloured buttons used for the selection, navigation and operation of various functions.

Teletext button (see page 32-34)

Text F.P. button (see page 33)

Direct channel access During normal TV viewing or when in the Tuning, Programme edit or Manual tuning menus, press and then enter channel number using the numeric buttons.

Channel up / down button

VCR / DVD buttons (see page 31)

TEXT

F.P. INDEX HOLD

123 456 789

VCR

PROGRAMME

REC VCR DVD

EXIT

Switch between viewing TV or AV input. (see page 35)

Cursor buttons to make selections and adjustments.

Exit the mode.

Text Hold / Picture Still button (see page 30, 32)

Text Index button (see page 34)

Programme / channel change buttons (0-9) and Teletext page buttons. (see page 32-34) When in Standby mode, switches TV On.

Information button Press to display status information for the current Programme position, Programme name, Channel number, MPX mode, Receiving system and ASPECT mode. Press again to remove the information.

Volume up / down button

DIRECT TV REC

DIRECT TV Record button (see page 17)

Using the On Screen Displays

Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote control as shown below to access and adjust features as desired.

The MENU button is used to open the main menus and also to return to the previous menu.

The up and down cursor buttons are used to move the cursor and select menus.

The left and right cursor buttons are used to access menus, adjust levels or to select from a range of options.

The OK button is used with a number of features to store settings after adjustments have been made or options have been set.

The EXIT button is used to exit the menu system and re turn to the normal viewing screen.

An On Screen Help box is displayed whenever a menu is dis played on the TV. This Help box indicates which buttons on the remote control are used to navigate the menu shown, see above for descriptions of button functions.

Note:

The Help box is not shown in the menu pictures in this in struc tion book due to space limitations.

EXIT

Sound menu

Bass Treble Balance Headphone volume MPX Mode Ambience

Select Adjust

Exit Return

123 456 789 C0

No service Music Off

ON SCREEN HELP ‘Instructions’ box

Picture menu

Press the MENU button.

Move to choose Picture menu.

Access Picture menu.

Move to choose menu option.

Adjust chosen option or access chosen menu.

Press the EXIT button at any time to go back to watching TV.

Viewing mode The Viewing mode menu allows you to select four different

screen settings - Dynamic, Normal, Cinema and Auto. In each Viewing mode setting, Contrast, Brightness, Colour, Sharpness, Tint (in NTSC only), Colour balance, Colour management, P-NR, MPEG NR and 3D-COMB can be adjusted and stored to suit your particular viewing requirement. (e.g., you may require different settings for viewing sports, ﬁ lms, news etc.) Viewing mode offers you up to a maximum of four separate settings for each signal source: RF, AV1, AV2, AV3, AV4, Component, PC, HDMI and Card operations. Changes will be stored automatically. By analysing and processing the incoming picture, all four modes feature automatic enhancement.

Contrast, Brightness, Colour, Sharpness

Increase or decrease the levels of these options ac cord ing to your personal preference.

123 456 789 C0

EXIT

Main menu

Picture menu

Sound menu

Setup menu

Picture menu

Viewing mode Contrast Brightness Colour Sharpness Tint Colour balance Colour management P-NR MPEG NR 3D-COMB On

Dynamic

Normal On Auto Off

Tint With an NTSC signal source connected to the TV, the picture

hue can be adjusted to suit your taste.

Colour balance Allows you to set the overall colour tone of the picture.

Choose from Cool, Normal and Warm.

Colour

Enables vivid colour adjustment automatically.

Picture menu

Viewing mode Contrast Brightness Colour Sharpness Tint Colour balance Colour management P-NR MPEG NR 3D-COMB On

Dynamic

Normal On Auto Off

management

P-NR Automatically reduces unwanted picture noise.

Not available during PC, HDMI and HD signal input.

MPEG NR Reduces MPEG noise.

Allows you to choose from Off, Min, Mid and Max. This function is effective in reducing the digital block noise when viewing DVD, VCD, SD card or digital broad cast ing. The effect will be changed based on the scene and

Picture menu

Viewing mode Contrast Brightness Colour Sharpness Tint Colour balance Colour management P-NR MPEG NR 3D-COMB On

Dynamic

Normal On Auto Off

image. MPEG:

Compression technology of the image signal adopted by DVD, VCD, SD card or digital broadcasting.

3D-COMB Occasionally, whilst viewing still or slow moving pic tures, colour patterning may be seen. Set

3D-COMB to On to display sharper and more accurate colours. Displayed only when receiving PAL or NTSC signals. Not displayed during RGB Video, S-Video, Component, PC, HDMI input and Card oprations.

Sound menu

Press the MENU button.

Move to choose Sound menu.

Access Sound menu.

Move to choose menu option.

Adjust chosen option or access chosen menu.

Press the EXIT button at any time to go back to watching TV.

Press the OK button after having adjusted some features to store the new settings as the default (replacing the factory setting).

Bass Increase or decrease level to enhance or minimise lower,

deeper sound output.

Treble Increase or decrease level to enhance or minimise sharper,

higher sound output.

123 456 789 C0

EXIT

Main menu

Picture menu

Sound menu

Setup menu

Balance The levels of sound between the left and right speak ers can

be adjusted to suit your listening position.

Headphone volume

Can be adjusted independently of the TV speakers so that everyone can enjoy listening at a level com fort able for them.

MPX Usually set to Stereo to provide the best re pro duc tion, but if

reception deteriorates or if the service is not available then switch to Mono. Mono (M1) and (M2) can also be selected if a mono signal is being transmitted.

Mode Sound quality can be improved when watching music scene

or drama by selecting the appropriate Music or Speech mode.

Ambience Ambience provides a dynamic enhancer to simulate

improved spatial effects. Switching is also possible by pressing the Ambience button.

Sound menu

Bass Treble Balance Headphone volume MPX Mode Ambience HDMI input

Sound menu

Bass Treble Balance Headphone volume MPX Mode Ambience HDMI input

Sound menu

Bass Treble Balance Headphone volume MPX Mode Ambience HDMI input

Sound menu

Bass Treble Balance Headphone volume MPX Mode Ambience HDMI input Auto

No service Music Off Auto

No service

Music Off Auto

No service

Music

Off Auto

No service Music

Off

HDMI input Displayed during HDMI input mode.

Allows you to choose from Auto, Digital and Analogue. Select to ﬁ t the input signal.

Auto : Set in normal use Digital : HDMI cable connection Analogue : HDMI-DVI adapter cable connection

See page 37.

Sound menu

Bass Treble Balance Headphone volume MPX Mode Ambience HDMI input

No service Music Off

Auto

Setup menu

Press the MENU button.

Move to choose Setup menu.

Access Setup menu.

Move to choose menu option.

Adjust chosen option or access chosen menu.

Press the EXIT button at any time to go back to watching TV.

Q-Link Allows you to select which AV terminal is to be used for data

communication between this TV and a com pat i ble recording device. Choose from Off, AV2 and AV4. See page 17.

AV2 / AV4 out Offers a choice of signals to send to the Scart terminal

selected in the Q-Link option. You can choose from the current TV programme position, the signal en ter ing AV1 / AV2 / AV3 / AV 4 or Monitor - the picture displayed on screen. Component signal input cannot be output to these Scart terminals.

Teletext Allows you to choose between FASTEXT or List mode.

See page 32-34.

EXIT

Main menu

Picture menu

Setup menu

Q-Link AV2 out Teletext Off timer Text language Tuning menu OSD language

123 456 789 C0

Sound menu

Setup menu

AV2 TV FASTEXT Off West

Off timer Switches the TV off within a preset time which you can

choose from between 0 to 90 minutes in 15 minute intervals.

Text language Select character set, so that all characters needed are

availabe for text on teletext pages (e.g., cyrillic char ac ters, etc.).

Mode Languages West: English, French, German, Greek, Italian, Span ish,

Swedish, Turkish

East1: Czech, English, Estonian, Lettish, Rumanian,

Russian, Ukrainian

East2: Czech, English, German, Hungarian, Lettish, Polish,

Rumanian

Tuning menu Provides access to many other features including

Programme edit and Auto setup. See page 12-16.

OSD language When you first install the TV, the On Screen Display

language is set according to your choice of country. OSD language lets you change the language used for On Screen

Displays.

Colour system During AV mode, Colour system is displayed. See page

12.

Setup menu

Q-Link AV2 out Teletext Off timer Text language Tuning menu OSD language

Setup menu

Q-Link AV2 out Teletext Off timer Text language Tuning menu OSD language

AV mode

Setup menu

Q-Link AV2 out Teletext Off timer Colour system Volume correction Text language OSD language

AV2 TV FASTEXT Off West

Access

AV2 TV FASTEXT Off West

Access

AV2 TV FASTEXT Off

Auto

West

Volume correction During AV, PC and HDMI mode, Volume correction is

displayed. You can adjust volume level of AV, PC and HDMI mode. Volume level is memorised.

Tuning menu – overview

Press the MENU button.

Move to choose Setup menu.

Access Setup menu.

Move to choose Tuning menu.

Access Tuning menu.

Move to choose menu option.

Adjust chosen option or access chosen menu.

Press the EXIT button at any time to go back to watching TV.

Press the OK button after having adjusted some features to store the new settings as the default (replacing the factory setting).

Programme edit Access in order to customize your programme set tings

(e.g., adding or deleting a programme position). See page 13, 14.

Auto setup Allows you to automatically retune the TV. Useful if you

move house and wish to retune your TV to the local stations. See page 15.

Manual tuning Allows individual programme positions to be tuned manually.

See page 16.

EXIT

Main menu

Picture menu

Setup menu

Q-Link AV2 out Teletext Off timer Text language Tuning menu OSD language

123 456 789 C0

Sound menu

Setup menu

AV2 TV FASTEXT Off West

Access

Fine tuning Use to make small adjustments to the tuning of an individual

station (useful for example when weather conditions are affecting reception quality of a programme).

Colour system Lets you select the correct transmission standard for the

transmission signal being received.

Volume correc. Lets you adjust the volume level of individual stations. Use

this feature if the volume level varies signiﬁ cantly between stations. Adjusting one station’s volume to bring it into line with the other stations means you can avoid having to adjust the volume each time you change channels.

Decoder (AV2 / AV4)

This option is used when a decoder is connected via AV2 / AV4. Store the setting as On so that every time this programme position is selected, the TV software is set to handle the decoded information (this is im por tant if your decoder unit is connected to AV2 / AV4 via a Q-Link device).

Tuning menu

Programme edit Auto setup Manual tuning Fine tuning Colour system Volume correc. Decoder (AV2)

Programme edit

Prog. Chan. Name Lock Sys

1 :

CH44

2 :

CH51

3 :

CH41

4 :

CH47

5 :

CH37

Delete Add Move Download

Tuning menu

Programme edit Auto setup Manual tuning Fine tuning Colour system Volume correc. Decoder (AV2)

Tuning menu

Programme edit Auto setup Manual tuning Fine tuning Colour system Volume correc. Decoder (AV2)

Tuning menu

Programme edit Auto setup Manual tuning Fine tuning Colour system Volume correc. Decoder (AV2)

ABC XYZ FTP 123 456

Access

Auto

Off

Off Off Off Off Off

Access

Auto

Off

Access

Auto

Off

Auto

Off

SC1 SC1 SC1 SC1 SC1

Tuning menu – Programme edit

Press the MENU button.

Move to choose Setup menu.

Access Setup menu.

Move to choose Tuning menu.

Access Tuning menu.

Move to choose Programme edit.

Access Programme edit.

Move to choose programme position (e.g., Prog. 3).

Make required change, e.g., moving a programme channel (see the relevant procedure below).

Press the EXIT button at any time to go back to watching TV.

Press the OK button after having adjusted some features to store the new settings.

EXIT

123 456 789

Adding / deleting a programme channel

Move the cursor to the programme to be deleted or added.

Press the Green button to add a programme channel to the programme position, or the Red button to delete one.

Press the same button again to conﬁ rm your decision.

Moving a programme channel

Move the cursor to the programme to be moved.

Press the Yellow button.

Choose the new position for the programme channel.

Press the Yellow button again to conﬁ rm your decision.

Tuning a programme channel

Yellow

Programme edit

Prog. Chan. Name Lock Sys

1 :

CH44

2 :

CH51

3 :

CH41

4 :

GreenRed

CH47

5 :

CH37

Add Cancel

Programme edit

Prog. Chan. Name Lock Sys

1 :

CH44

2 :

CH51

3 :

CH41

4 :

CH47

5 :

CH37

ABC

XYZ FTP 123 456

ABC

XYZ FTP 123 456

Confirm Cancel

Off

Off Off Off Off

Off

Off Off Off Off

SC1

SC1 SC1 SC1 SC1

SC1

SC1 SC1 SC1 SC1

Move to the Chan. column.

Increase or decrease the programme channel number (you will see the TV retune to the new number as you change it) or use the C button for Direct Channel Ac cess. See page 7.

Press the OK button to store this change.

Programme edit

Prog. Chan. Name Lock Sys

1 :

CH44

ABC

Off 2 : 3 : 4 : 5 :

CH51 CH41 CH47 CH37

XYZ FTP 123 456

Off

SC1 SC1 SC1 SC1 SC1

Tuning menu – Programme edit

Renaming a programme channel

Move to the Name column.

Choose the new character. The box at the bottom of the screen shows the character currently selected.

Move to the next character position.

Continue until renaming is done.

Press the OK button to store the new name.

Locking a programme channel

You may wish to lock a programme channel to prevent ac cess to it.

Move to the Lock column.

Choose between Lock On or Lock Off.

Press the OK button to store the new setting.

Note:

When a programme position is locked, Direct Channel Access using the C and numeric buttons on the remote control is not available.

Programme edit

Prog.

Chan. Name Lock Sys

1 :

CH44

2 :

CH51

3 :

CH41

4 :

CH47

5 :

CH37

ABCDEFGHIJKLMNOPQRST UVWXYZ+-. 0123456789

Programme edit

Prog. Chan. Name Lock Sys

1 :

CH44

2 :

CH51

3 :

CH41

4 :

CH47

5 :

CH37

XYZ FTP 123 456

ABC XYZ FTP 123 456

Off Off Off Off Off

SC1 SC1 SC1 SC1 SC1

Changing the sound system for a channel

You can change the sound system used for a programme channel.

Move to the Sys column.

Choose the required sound system: SC1 : PAL B, G, H / SECAM B, G SC2 : PAL I SC3 : PAL D, K / SECAM D, K F : SECAM L / L’

Press the OK button to store the new setting.

Copying programme information to a recording device

You can copy programme information to a compatible re cord ing device connected to AV2 / AV4. See page 36 for con nec tion information. Press the Blue button. Programme data will now be sent to the recording device(s). This might take a few seconds, depending on the number of stations stored. If the message “Feature not available” ap pears on the screen, the television is unable to send the programme information to the recording device(s). See the device’s instruction book for further information.

Blue

Programme edit

Prog. Chan. Name Lock Sys

1 :

CH44

ABC

Off

2 :

CH51 3 : 4 : 5 :

DOWNLOAD IN PROGRESS

Remote control unavailable

XYZ

CH41

FTP

CH47

123

CH37

456

PLEASE WAIT

Programme : 63

Off Off Off Off

SC1 SC1 SC1 SC1 SC1

Note:

This is not available when you choose Q-Link Off in Setup menu.

+ 30 hidden pages