PANASONIC TP-V 100U 16 Datasheet

Download

Page 1

Aluminum Electrolytic Capacitors/TP

A±0.2

()Reference size

φD±0.5

B±0.2

(I)

(P)

(I)

–

0.3 max.

Pressure Relief (φ10 and larger)

Surface Mount Type

Series:

■ Features

Lower ESR at Low temperature after endurance

● Endurance: 3000 h at 125 °C(D8 size : 2000 h)

● Automotive

● Vibration-proof product is available upon request. (φ8 mm and larger)

● RoHS directive compliant

●

■ Speciﬁ cations

Category Temp. Range –40 °C to +12 5 ° C Rated W.V.Range 10 V.DC to 35 V.D C Nominal Cap.Range 47 µF to 470 µF Capacitance Tolerance ±20 % (120 Hz/+20 °C) DC Leakage Cur rent I < 0.01 CV (µA) After 2 minutes tan

Endurance

Shelf Life

Resistance to Soldering Heat

Typ e:

High temperature Lead-Free reﬂ ow(sufﬁ x:A✽)

After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours(D8 size : 2000 h). the capacitors shall meet the limits speciﬁ ed below.

Capacitance change ±30 % of initial measured value tan

DC leakage current

ESR after Endurance (액/100kHz)

After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits speciﬁ ed in Endurance (With voltage treatment)

After reﬂ ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan

DC leakage current

300 % of initial speciﬁ ed value

initial speciﬁ ed value

Initial(+20 °C) 0.45 0.2 0.15 After 2000 h(-40 °C) 40 4.5 3.5

initial speciﬁ ed value

Please see the attached standard products list

Size Code

D8 F G

■ Frequency correction factor for ripple current

Correction factor 0.65 0.85 0.95 1.00

Example:10 V 220 µF Marking color : BLACK

Rated Voltage Mark

A 10 V C 16 V E 25 V V 35 V

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.

Negative polarity marking (–)

220

TPA

Lot number

Capacitance (µF)

Series identification

Mark for Lead-Free Products Black Dot (Square)

Rated voltage Mark

Frequency (Hz)

120 1 k 10 k 100 k to

■ Di men sions in mm (not to scale)■ Marking

Size

DLA, B H I W P K

code

D8 6.3 7.7±0.3 6.6

F 8.0 10.2±0.3 8.3

G 10.0 10.2±0.3 10.3

7.8 max.

10.0max.

12.0max.

2.6 0.65±0.1 1.8

3.4 0.90±0.2 3.1

3.5 0.90±0.2 4.6

(Unit : mm)

0.35

0.70±0.20

00 Nov. 2012

– EEE-57 –

+ 0.15

- 0.20

Page 2

Aluminum Electrolytic Capacitors/TP

■ Standard Prod ucts

Endurance : 125 °C 3000 h (φ6.3҂7.7 < : 2000 h)

Case size Speciﬁ cation

W.V.

Cap.

(±20 %)

Dia. Length

✽

Code

(V) (µF) (mm) (mm)

220 8 10.2 F 270 0.20 3 0.30

330

810.2(F)2700.20 3 0.30

10 10.2 G 500 0.15 2 0.30

470 10 10.2 G 5000.15 2 0.30

6.3 7.7 D8 197 0.45 5 0.23

810.2F 2700.20 3 0.23

100

220 8 10.2 F 270 0.20 3 0.23

330 10 10.2 G 5000.15 2 0.23

470 10 10.2 G 5000.15 2 0.23

100 8 10.2 F 270 0.20 3 0.18

220 10 10.2 G 5000.15 2 0.18

330 10 10.2 G 5000.15 2 0.18

6.3 7.7 D8 197 0.45 5 0.16

810.2F 2700.20 3 0.16

100 8 10.2 F 270 0.20 3 0.16

220 10 10.2 G 5000.15 2 0.16

Size code( ):Miniaturization product

✽

If Part number exceeds 12 digits, voltage code is abbreviated as follows; 1A씮A, 1C씮C, 1E씮E, 1V씮V

· Please refer to the page of “Reﬂ ow Proﬁ le” and “The Taping Dimensions”.

· When requesting vibration-proof product, please put the last “V” instead to “P”

Size

Ripple

Current (10 0 kHz) (+125 °C)

(mA r.m.s.)

ESR

(10 0 kHz)

(액)

+20 °C - 40 °C

tan

(120 Hz) (+20 ° C)

Part No.

(RoHS:compliant)

EEETP1A221AP

EEETPA331UAP

EEETP1A331AP

EEETP1A471AP

EEETPC101XAP

EEETP1C101AP

EEETP1C221AP

EEETP1C331AP

EEETP1C471AP

EEETP1E101AP

EEETP1E221AP

EEETP1E331AP

EEETPV470XAP

EEETP1V470AP

EEETP1V101AP

EEETP1V221AP

Packaging Q'ty

Reﬂ ow

(8) 500

(8) 900

(8) 500

(8) 900

(8) 500

Min.

Tap ing

(pcs)

– EEE- 58 –

00 Nov. 2012