
Radial Lead Type
Aluminum Electrolytic Capacitors/ TP
Series:
TP
Typ e:
A
■ Features
Endurance: 125 °C 2000 h to 5000 h or 135 °C 1000 h to 2000 h
●
Smaller than series TA
●
High ripple current (at high frequency) : 20 to 40% higher than TA series
●
RoHS directive compliant
●
■ Specifi cations
Category Temp. Range –40 °C to + 135 °C
Rated W.V. Range 25 V .DC to 35 V .DC
Nominal Cap. Range 100 µF to 5100 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
tan
δ
Endurance 1
Endurance 2
Shelf Life 1
Shelf Life 2
W.V.(V ) 25 35
tan
δ
0.14 0.12
For capacitance value > 1000 µF , add 0.02 per every 1000 µF.
After following life test with DC voltage and +125 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
8 : 2000 hours, φ10 : 3000 hours, φ12.5 : 4000 hours, φ16 to φ18 : 5000 hours
φ
Capacitance change ±30% of initial measured value
tan
δ
300 % of initial specifi ed value
<
DC leakage current< initial specifi ed value
After following life test with DC voltage and +135 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
8 : 1000 hours, φ10 to φ18 : 2000 hours
φ
Capacitance change ±30% of initial measured value
tan
δ
300 % of initial specifi ed value
<
DC leakage current< initial specifi ed value
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
After storage for 1000 hours at +135 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
(120Hz / +20 °C)
■ Frequency correction factor for ripple current
W.V.
(V.DC)
Cap. (µF)
60 120 1 k 10 k 100 k
to 330 0.55 0.65 0.85 0.90 1.00
25 to 35
390 to 1000 0.70 0.75 0.90 0.95 1.00
120 0 to 0.75 0.80 0.90 0.95 1.00
■ Di men sions in mm (not to scale)
Sleeve
Pressure relief
✽L
✽ L<16:L±1.5
L>20:L±2.0
Body Dia. φD81012.51618
Lead Dia. φd0.60.60.6 0.8 0.8
Lead space F 3.5 5.0 5.0 7.5 7.5
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
φd±0.05
14 min.
+
–
3 min.
Frequency (Hz)
φ8
φD±0.5
F±0.5
[mm]
φ10<
φD±0.5
Jan. 201100
(mm)

Aluminum Electrolytic Capacitors/ TP
■ Standard Prod ucts
Case size Specifi cation Lead Length
W.V.
Cap.
(±20 %)
Dia.
Length
Ripple
Current
(10 0 kHz)
(+125 °C)
(V) (µF) (mm) (mm)
(mA r.m.s.) (mA r.m.s.)
220 10 12.5 580 500 0.190 0.14
330 10 16 1100 945 0.130 0.14
8 20 1060 7600.067 0.14
470
10 16 1100 945 0.130 0.14
510 10 16 1100 9 45 0.130 0 .14
820 10 20 1540 110 0 0.052 0.14
1000 12.5 20 1860 1490 0.038 0.14
120 0 12.5 2 0 1860 1490 0.038 0.14
12.5 25 2180 1750 0.030 0.14
180 0
16 20 2380 1985 0.029 0.14
25
2000 16 20 2380 1985 0.029 0.16
16 25 276 0 2300 0.022 0.16
2200
18 2 0 2700 2250 0.028 0.16
16 25 276 0 2300 0.022 0.16
2700
18 2 0 2700 2250 0.028 0.16
16 31.5 3250 2710 0.018 0.18
3300
18 25 2960 2470 0.020 0.18
16 31.5 3250 2710 0.018 0.18
3900
18 25 2960 2470 0.020 0.18
4700 18 31.5 3480 2900 0.016 0.20
510 0 18 31.5 3480 2900 0.016 0.22
100 10 12.5 580 500 0.190 0.12
120 10 12.5 58 0 500 0.190 0.12
8 20 1060 7600.067 0.12
220
10 16 1100 945 0.130 0.12
8 20 1060 7600.067 0.12
270
10 16 1100 945 0.130 0.12
330 10 20 1540 1100 0.052 0.12
390 10 20 1540 110 0 0.052 0.12
470 12.5 20 1860 1490 0.038 0.12
560 12.5 20 1860 1490 0.038 0.12
620 12.5 20 1860 1490 0.038 0.12
35
820 12.5 25 2180 1750 0.030 0.12
1000 16 20 2380 19 85 0.029 0.12
120 0 16 2 0 2380 1985 0.029 0.12
16 25 276 0 2300 0.022 0.12
1500
18 2 0 2700 2250 0.028 0.12
160 0 16 25 2760 2300 0.022 0.12
16 31.5 3250 2710 0.018 0.12
180 0
18 25 2960 2470 0.020 0.12
16 31.5 3250 2710 0.018 0.14
2000
18 25 2960 2470 0.020 0.14
2200 18 31.5 3480 2900 0.016 0.14
2700 18 31.5 3480 2900 0.016 0.14
When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm.
The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide.
Ripple
Current
(10 0 kHz)
(+135 °C )
E.S.R
(10 0 kHz)
(+20 ° C)
()
tan
δ
(120 k Hz)
(+20 ° C)
125 °C
135 °C
Enduance
Enduance
(hours) (hours)
3000 2000
3000 2000
2000 1000
3000 2000
3000 2000
3000 2000
4000 2000
4000 2000
4000 2000
5000 2000
5000 2000
5000 2000
5000 2000
5000 2000
5000 2000
5000 2000
5000 2000
5000 2000
5000 2000
5000 2000
5000 2000
3000 2000
3000 2000
2000 1000
3000 2000
2000 1000
3000 2000
3000 2000
3000 2000
4000 2000
4000 2000
4000 2000
4000 2000
5000 2000
5000 2000
5000 2000
5000 2000
5000 2000
5000 2000
5000 2000
5000 2000
5000 2000
5000 2000
5000 2000
Lead Space
Lead
Dia.
Straight
Tap ing
✽
B
Part No.
(mm) (mm) (mm) (pcs) (pcs)
0.6 5.0 5.0
0.6 5.0 5.0
0.6 3.5 5.0
0.6 5.0 5.0
0.6 5.0 5.0
0.6 5.0 5.0
0.6 5.0 5.0
0.6 5.0 5.0
0.6 5.0 5.0
0.8 7.5 7.5
0.8 7.5 7.5
0.8 7.5 7.5
0.8 7.5 7.5
0.8 7.5 7.5
0.8 7.5 7.5
0.8 7.5
0.8 7.5 7.5
0.8 7.5
0.8 7.5 7.5
0.8 7.5
0.8 7.5
0.6 5.0 5.0
0.6 5.0 5.0
0.6 3.5 5.0
0.6 5.0 5.0
0.6 3.5 5.0
0.6 5.0 5.0
0.6 5.0 5.0
0.6 5.0 5.0
0.6 5.0 5.0
0.6 5.0 5.0
0.6 5.0 5.0
0.6 5.0 5.0
0.8 7.5 7.5
0.8 7.5 7.5
0.8 7.5 7.5
0.8 7.5 7.5
0.8 7.5 7.5
0.8 7.5
0.8 7.5 7.5
0.8 7.5
0.8 7.5 7.5
0.8 7.5
0.8 7.5
EEUTP1E221( )
EEUTP1E331( )
EEUTP1E471L( )
EEUTP1E471( )
EEUTP1E511( )
EEUTP1E821( )
EEUTP1E102( )
EEUTP1E122( )
EEUTP1E182( )
EEUTP1E182S( )
EEUTP1E202S( )
EEUTP1E222( )
EEUTP1E222S( )
EEUTP1E272( )
EEUTP1E272S( )
EEUTP1E332
EEUTP1E332S( )
EEUTP1E392
EEUTP1E392S( )
EEUTP1E472
EEUTP1E512
EEUTP1V101( )
EEUTP1V121( )
EEUTP1V221L( )
EEUTP1V221( )
EEUTP1V271L( )
EEUTP1V271( )
EEUTP1V331( )
EEUTP1V391( )
EEUTP1V471( )
EEUTP1V561( )
EEUTP1V621( )
EEUTP1V821( )
EEUTP1V102( )
EEUTP1V122( )
EEUTP1V152( )
EEUTP1V152S( )
EEUTP1V162( )
EEUTP1V182
EEUTP1V182S( )
EEUTP1V202
EEUTP1V202S( )
EEUTP1V222
EEUTP1V272
Substandard (E24series numbers)
:
✽
✽
✽
✽
✽
✽
✽
✽
Min. Packaging Q'ty
Straight
Tap ing
Leads
200 500
200 500
200 1000
200 500
200 500
200 500
200 500
200 500
200 500
100 250
100 250
100 250
100 250
100 250
100 250
100
100 250
100
100 250
50
50
200 500
200 500
200 1000
200 500
200 1000
200 500
200 500
200 500
200 500
200 500
200 500
200 500
100 250
100 250
100 250
100 250
100 250
100
100 250
100
100 250
50
50
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jun. 201101