
Audio Visual Centre
Panasonic TM700 HD Video Camera
User Guide
Kit Contents:
Panasonic TM700 HD Video Camera with Tripod footplate
7” Table top tripod
Power supply / Battery Charger (inc. power and Fig8 leads)
Hot-shoe bracket
Battery
Remote Control
USB Cable
Composite (phono) Video cable

Preparation
Before using
1
Parts identification and
handling
[HDC-SD700]/[HDC-TM700]
2
3
1
4
7
1415
5
6
1089
11
12
13
1 Speaker
2 Power button [ ] (l 22)
3 Inlet (cooling fan) (l 26)
4 Intelligent auto/Manual button
[iA/MANUAL] (l 32, 75)
5 Optical image stabilizer button
[ /O.I.S.] (l 50)
6 Eyepiece corrector dial (l 24)
7 1080/50p button [1080/50p] (l 52)
8 Battery release lever [BATT] (l 16)
9 Battery holder (l 16)
10 DC input terminal [DC IN] (l 19)
≥ Always use the supplied AC adaptor or a
genuine Panasonic AC adaptor
(VW-AD21E-K; optional).
11 HDMI mini connector [HDMI]
(l 95, 99)
12 USB terminal [ ] (l 104, 119)
13 AV multi connector (l 95, 110)
Use the AV multi cable (only the supplied cable).
≥
14 Card slot (l 21)
15 Access lamp [ACCESS] (l 21)
16 Lens cover
≥ The lens cover opens in motion
picture recording mode or still picture
recording mode. (l 23)
17 Multi manual ring (l 75, 78)
18 Camera function button
[CAMERA FUNCTION] (l 75)
19 Remote control sensor (l 48)
20 Built-in flash (l 55)
21 Lens (LEICA DICOMAR)
≥ Please refer to page 26 for details about
attaching the lens hood.
22 AF assist lamp (l 74)
23 Recording lamp (l 42)
9
VQT2N56

24 LCD monitor (Touch screen) (l24)
≥ It can open up to 90o.
≥ It can rotate up to 180o A towards the lens
or 90o B towards the viewfinder.
Due to limitations in LCD production
technology, there may be some tiny bright
or dark spots on the LCD monitor screen.
However, this is not a malfunction and
does not affect the recorded picture.
25 Viewfinder (l 24)
Due to limitations in LCD production
technology, there may be some tiny bright
or dark spots on the viewfinder screen.
However, this is not a malfunction and
does not affect the recorded picture.
26 Quick menu button [Q.MENU] (l 38)
27 Sub recording start/stop button (l26)
≥ This button functions in the same manner
as the recording start/stop button.
28 Adjust zoom buttons (l 49)
29 Menu button [MENU] (l 37)
30 Delete button [ ] (l 88)
31 Tripod receptacle
10
VQT2N56

32 Shoe adaptor mounting part (l 150)
MIC
32
33
34
383635
39 40 41 42
43
44
37
33 Shoe adaptor cover (l 150)
34 Shoe adaptor release lever
[SHOE ADAPTOR RELEASE] (l 150)
35 Photoshot button [ ] (l 30)
36 Zoom lever [W/T] (In motion picture
recording mode or still picture
recording mode) (l 49)
Thumbnail display switch [ / ]/
Volume lever [sVOLr] (In playback
mode) (l 36)
37 Status indicator (l 22)
38 Internal microphones
39 Recording start/stop button (l 28)
40 Mode dial (l 23)
41 Shoulder strap fixture
42 Grip belt
Adjust the length of the grip belt so that it fits
your hand.
1 Flip the belt.
2 Adjust the length.
3 Replace the belt.
43 Microphone terminal [MIC]
≥ A compatible plug-in powered microphone
can be used as an external microphone.
≥ Audio will be stereo (2 ch) with the
external microphone input.
≥ When the unit is connected with the AC
adaptor, sometimes noise may be heard
depending on the microphone type. In this
case, please switch to the battery for the
power supply and the noise will stop.
44 Headphone terminal [ ] (l 57)
≥ Excessive sound pressure from
earphones and headphones can cause
hearing loss.
11
VQT2N56