Panasonic TH-P42UT30D, TH-P42UT30K, TH-P42UT30M, TH-P42UT30P, TH-P42UT30V User Manual

...
Operating Instructions
Plasma Television
Model No.
Thank you for purchasing this Panasonic product. Please read these instructions before operating your set and retain them for future reference. The images shown in this manual are for illustrative purposes only.
English
TQB4TC0120
Enjoy viewing 3D images and experience an amazing level of multimedia excitement
Sharp pictures with HDMI terminal Create home theatre and DVD recorder link-ups with “VIERA Link” without complicated settings!
Enjoy rich multimedia
VCR
Amplifier with
Speaker system
DVD Recorder
SD Card
DVD Player
Blu-ray Disc Player
Camcorder
Personal computer
Set top box
2
Licence
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
®
, DivX Certified®, DivX Plus™ HD and
DivX associated logos are trademarks of DivX, Inc. and are used under license.
®
, the DLNA Logo and DLNA CERTIFIED™ are
DLNA trademarks, service marks, or certification marks of the Digital Living Network Alliance.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
SDXC Logo is a trademark of SD-3C, LLC.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license therefrom.
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.
VIERA Connect is a trademark of Panasonic Corporation.
“RealD 3D” is a trademark of RealD. This product is covered by U.S. Patent No. 5,193,000 until 28 August, 2011.
VGA is a trademark of International Business Machines Corporation.
S-VGA is a registered trademark of the Video Electronics Standard Association.
HDAVI Control™ is a trademark of Panasonic Corporation.
Macintosh is a trademark of Apple Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http:// www.mpegla.com.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.
Contents
Be Sure to Read
Safety Precautions ·····································4 (Warning / Caution)
Notes ··························································5
Quick Start Guide
Accessories / Options ·································6 Basic Connection······································10 Identifying Controls ···································11 Auto Tuning ··············································13
Basic Features
Using “VIERA Connect” ····························17 Watching TV ·············································18 Viewing Teletext ········································21 Watching External Inputs ··························23 Viewing 3D images ···································25 How to Use VIERA TOOLS ······················32 How to Use the Menu Functions ··············33
Advanced Features
Tuning and Editing Channels ···················43 Child Lock ·················································45 Input Labels ··············································46 Shipping Condition (Reset settings) ·········47 Using Media Player ··································48 Using Network Services ···························58 VIERA Link Functions ·······························68 External Equipment ··································73
Technical
Technical Information································76 FAQs·························································84 Maintenance ·············································86 Specifications ···········································87
3
Safety Precautions
Warning
Handling the mains plug and lead
Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat
and cause fire.) Ensure that the mains plug is easily accessible.
Ensure the earth pin on the mains plug is securely connected to prevent electrical shock.
• An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.
Do not touch the mains plug with a wet hand. (This may cause electrical shock.)
Safety Precautions
Do not use any mains lead other than that provided with this TV. (This may cause fire or electrical
shock.) Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.)
• Do not move the TV with the lead plugged in the socket outlet.
• Do not place a heavy object on the lead or place the lead near a high-temperature object.
• Do not twist the lead, bend it excessively, or stretch it.
• Do not pull on the lead. Hold onto the mains plug body when disconnecting the lead.
• Do not use a damaged mains plug or socket outlet.
If you find any abnormality, remove the mains plug immediately!
Power source
This TV is designed to operate on:
• AC 220 - 240 V, 50 / 60 Hz
TH-P42UT30P, TH-P50UT30P:
(
AC 110 - 240 V, 50 / 60 Hz
Do not remove covers and NEVER modify the TV yourself
Do not remove the rear cover as live parts are
accessible when it is removed. There are no user serviceable parts inside. (High-voltage components may cause serious electrical shock.) Have the TV checked, adjusted, or repaired at
your local Panasonic dealer.
Do not expose to rain or excessive moisture
To prevent damage which might result in
electric shock or fire, do not expose this TV to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV.
Do not expose to direct sunlight and other sources of heat
Avoid exposing the TV to direct sunlight and
other sources of heat.
To prevent the spread of fire, keep candles or other open flames away from this product
4
at all times
)
Mains plug types vary between countries.
Do not insert foreign objects into the TV
Do not allow any objects to drop into the TV
through the air vents. (Fire or electrical shock may result.)
Do not place the TV on sloped or unstable surfaces
The TV may fall off or tip over.
Use only the dedicated pedestals / mounting equipment
Using an unapproved pedestal or other fixtures
may make the TV unstable, risking injury. Be sure to ask your local Panasonic dealer to perform setup. Use approved pedestals (p. 6) / wall-hanging
brackets (p. 9).
Do not allow children to handle SD Card
As with any small object, SD Cards can be
swallowed by young children. Please remove SD Card immediately after use and store out of reach of children.
Caution
This appliance is intended for use in tropical climates
When cleaning the TV, remove the mains plug
Cleaning an energised TV may cause electrical shock.
When the TV is not going to be used for a long period of time, remove the mains plug
This TV will still consume some power even in the Off mode, as long as the mains plug is still
connected to a live socket outlet.
Transport only in upright position
Transporting the TV with its display panel facing upward or downward may cause damage to the
internal circuitry.
Allow sufficient space around the TV for radiated heat
Minimum distance
10
10
Do not block the rear air vents
Blocked ventilation by newspapers, table cloths, curtains, etc. may cause overheating, fire or electrical
shock.
Do not apply strong force or impact to the display panel
This may cause damage resulting in injury.
Do not expose your ears to excessive volume from the headphones
Irreversible damage can be caused.
The TV is heavy. Handle the TV by 2 or more people. Support as shown to avoid injury by the TV tipping or falling.
10
When using the pedestal, keep the space between the bottom of the TV
and the surface where the TV is set.
7
If using a Wall-hanging bracket, refer to its manual.
(cm)
Safety Precautions | Notes
Notes
Do not display a still picture for a long time
This causes the image to remain on the plasma screen (“image retention”). This is not considered a malfunction and is not covered by the warranty.
Typical still images
Programme number and other logos
Image displayed in 4:3 mode
Video game
Computer image
To prevent image retention, contrast is lowered automatically after a few minutes if no signals are sent or no operations are performed. (p. 84)
Auto power standby function
The TV will automatically go into Standby mode in the
following conditions:
• no signal is received and no operation is performed for 30 minutes in TV mode
• [Off Timer] is active in the Timer Menu (p. 18)
• no operation is performed for the period selected in [Auto Standby] (p. 39)
Keep the TV away from these types of equipment
Electronic equipment
In particular, do not place video equipment near the TV. Electromagnetic interference may distort images / sound. Equipment with an infrared sensor
This TV also emits infrared rays. This may affect operation of other equipment.
5
Accessories / Options
Standard accessories
Remote Control
N2QAYB000586
Mains Lead
TH-P42UT30K TH-P42UT30M
(
TH-P42UT30P
Accessories / Options
Operating Instructions
This product contains possibly dangerous parts (such as plastic bags), which can be breathed in or
swallowed by young children accidentally. Keep these parts out of reach of young children.
Inserting and removing remote’s batteries
Batteries for the Remote Control (2)
R6 (AA)
TH-P50UT30M TH-P50UT30P
TH-P42UT30D TH-P42UT30Q
)
TH-P50UT30D
(
TH-P50UT30Q
Pedestal
(p. 7)
(TH-P42UT30T)
)
Ferrite core (2)
TH-P42UT30Q
(
TH-P50UT30Q
J0KG00000146
(p. 75)
Use the Ferrite cores to comply with the EMC standard.
TH-P42UT30V
(
TH-P50UT30V
)
)
1
2
Note the correct polarity (+ or -)
6
Pull Open
Hook
Close
Caution
Incorrect installation may cause battery leakage
and corrosion, resulting in damage to the remote control. Do not mix old and new batteries.
Do not mix different battery types (such as alkaline
and manganese batteries). Do not use rechargeable (Ni-Cd) batteries.
Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, fire or the like. Do not disassemble or modify the remote control.
Attaching the pedestal
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
Otherwise the TV or the display may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest
Panasonic dealer immediately.
During set-up, make sure that all screws are securely tightened.
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will
not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and
personal injury may result.
Two or more people are required to install and remove the TV.
If two or more people are not present, the TV may be dropped, and personal injury may result.
Assembly screw (4) (silver)
M5 × 20 (mm)
Assembly screw (4) (black)
M5 × 25 (mm)
Pole
TBL5ZA3035
Base
TBL5ZX0051
TH-P42UT30D TH-P42UT30K TH-P42UT30M TH-P42UT30P TH-P42UT30Q
(
TH-P42UT30T TH-P42UT30V
TBL5ZX0053
TH-P50UT30D TH-P50UT30M TH-P50UT30P TH-P50UT30Q
(
TH-P50UT30V
)
)
Accessories / Options
Assembling the pedestal
Use the assembly screws to fasten the pole to the base securely.
Make sure that the screws are
securely tightened. Forcing the assembly screws the
wrong way will strip the threads.
A
D
C
Front
Securing the TV
Insert the pole into the TV, and then fasten securely with the assembly screws .
Tighten the four assembly screws loosely at first, then tighten
them firmly to fix securely. Carry out the work on a horizontal and level surface.
B
Hole for
pedestal
installation
D
(View from the bottom)
Arrow mark
7
Optional accessories
Please contact your nearest Panasonic dealer to purchase the recommended optional accessories. For additional details, please refer to the manual of the optional accessories.
Wireless LAN Adaptor and Extension cable
Accessories / Options
3D Eyewear
(Battery type)
TY-EW3D10W
(Rechargeable type)
TY-EW3D2SW
TY-EW3D2MW
TY-EW3D2LW
Communication Camera
TY-CC10W
Please refer to the following web site for usable Wireless LAN Adaptor. (English only) http://panasonic.jp/support/global/cs/tv/
Additional information for Wireless LAN Adaptor and access point may also be on
this web site.
Caution
To use the Wireless LAN Adaptor, an Access Point needs to be obtained.
It is recommended to use the Wireless LAN Adaptor with the extension cable.
To avoid radio wave interference, keep the TV away from the devices such as
other wireless LAN devices, microwaves and the devices that use 2.4 GHz and 5 GHz signals when using the Wireless LAN Adaptor. Otherwise malfunction may occur. Depending on the area, this optional accessory may not be available.
Product information (Model No. and release date etc.) is subject to change
without notice. For more product information (English only)
http://panasonic.net/avc/viera/3d/asia.html
Caution
This camera can be used on VIERA Connect (p. 17).
Please also read the manual of the camera.
Depending on the area, this optional accessory may not be available.
For details, consult your local Panasonic dealer.
8
Wall-hanging bracket
TY-WK4P1RW
The angle of wall-hanging bracket can be adjusted in “zero tilting (vertical)” and “5, 10, 15 or 20-degree tilting” for this TV.
Rear of the TV
400 mm
300 mm
Holes for wall-hanging bracket installation
Warning
Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself
have the risk of personal injury and product damage. In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging brackets. Any damage caused by installing without a qualified installer will void your warranty. Carefully read the instructions accompanying optional accessories, and be
absolutely sure to take steps to prevent the TV from falling off. Handle the TV carefully during installation since subjecting it to impact or other
forces may cause product damage. Take care when fixing wall brackets to the wall. Always ensure that there are no
electrical cables or pipes in the wall before hanging bracket. To prevent fall and injury, remove the TV from its fixed wall position when it is no
longer in use.
Screw for fixing the TV onto the wall-hanging bracket (not supplied with the TV)
Depth of screw: minimum 15 mm maximum 30 mm
Screw Thread Type: M8
(View from the side)
Accessories / Options
9
Basic Connection
External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.
Rear of the TV
Satellite dish
Set top box
Basic Connection
Mains lead (supplied)
Mains Lead
Push until both side tabs click
To remove from the TV:
Press both tabs and pull on mains connector to release
AC 220 - 240 V, 50 / 60 Hz (TH-P42UT30P, TH-P50UT30P: AC 110 - 240 V, 50 / 60 Hz )
Note
Keep RF (antenna) cable away from the mains lead to avoid and minimise mains interference pickup.
Do not place the RF cable under the TV.
To obtain optimum quality picture and sound, an aerial, the correct cable (75 Ω coaxial), and the
correct terminating plug are required. If a communal aerial system is used, you may require the correct connection cable and plug between
the wall aerial socket and the TV. Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial
system for your particular area and the accessories required. Any matters regarding aerial installation, upgrading of existing systems or accessories required, and
the costs incurred, are the responsibility of you, the Customer. To obtain optimum quality picture, select either an Aerial or a cable TV network.
VIERA Link connection (p. 68)
Other equipment connection (p. 73 - 75)
Read the manual of the equipment, too.
Make sure that the mains lead is securely fixed.
tabs
Fully wired HDMI compliant cable
RF cable
Aerial
10
Identifying Controls
TV
1 2
3 4 5
6
7
8
10 11 12 13
9
1 Function select
[Volume] / [Contrast] / [Brightness] / [Colour] /
[Sharpness] / [Tint] (NTSC signal) / [Bass] ([Music] or [Speech] mode in the Sound Menu) / [Treble] ([Music] or [Speech] mode in the Sound Menu) / [Balance] / [Auto Tuning]
2 Channel Up / Down, Value change (when using
the F button), Switching the TV On
3 Changes the input mode 4 Headphones jack 5 USB 2/3 port 6 SD Card slot 7 HDMI3 terminal 8 AV3 terminals 9 Mains power On / Off switch
Use to switch the mains power.
If you turned the TV Off during Standby mode
10 Infrared transmitter for 3D Eyewear
Do not place any objects between the
transmitter and 3D Eyewear.
11 Remote control signal receiver
Do not place any objects between the TV remote
control signal receiver and remote control.
12 C.A.T.S. (Contrast Automatic Tracking
System) sensor
Senses brightness to adjust picture quality
when [Eco Mode] in the Picture Menu is set to [On] (p. 34)
13 Power LED
Red: Standby
Green: On Orange (flash): [USB Charge in Standby] is [On] When using the remote control, indicates the
TV has received a command.
by the remote control last time, the TV will be in Standby mode when you turn the TV On with Mains power On / Off switch.
About the Operation Guide - On Screen Displays
The operation Guide is displayed at the bottom of the on Screen Displays. The button used on this screen and manner of operation is displayed.
Example: Media Player
Media Player
Photo
All photos
INFO
OPTION
RGYB
Identifying Controls
EXIT
RETURN
Operation Guide
View
EXIT
Select
Slideshow View Select Drive Select Contents Select
RETURN
OPTION
Info
Option Menu
SD Card
TV
11
Remote Control
POWER
1
2 3
4 5
6
7
8
Identifying Controls
9
10
11
12
13
1 Standby On / Off switch
Switches TV On or Off standby
2
3D button
Switches to the viewing mode between 2D
and 3D
3 [Main Menu] (p. 33)
Press to access Picture, Sound and Setup
Menus
4 Information (p. 19)
Displays channel and programme
information
5 VIERA TOOLS
Displays some special feature icons and
accesses easily
6 [VIERA Link Menu]
Accesses VIERA Link Menu
MENU ASPECT
INFO
OPTION
RGY B
TEXT
F.P.
ghi
MUTE
POWER
(p.
INPUT
TVPC AV
INDEX HOLD
abc def
jk l
tuvpqrs
LAST VIEW
CHVOL
CH
TV
30)
(p. 32)
EXIT
S
D
C
A
R
RETURN
mno
wxyz
REC
D
(p. 70)
14
15 16
17
18
19
20
21
22 23
24
25
26
7OK
Confirms selections and choices
Press after selecting channel positions to
quickly change programme
8 [Option Menu]
Easy optional setting for viewing, sound, etc.
9 Teletext∗ (p. 21)
Switches to teletext mode
10 Favourite Page∗ (p. 21)
Calls up the teletext page stored in blue
button.
11 Numeric buttons
Changes channel and teletext pages
When in Standby mode, switches TV On
12 Sound Mute
Switches sound mute On or Off
13 Volume Up / Down 14 Input mode selection
PC - switches to PC input mode (p. 23)
TV - switches to TV mode (p. 18)
AV - switches to AV input mode from Input
Selection list (p. 23)
15 Aspect (p. 20)
Changes aspect ratio
16 [VIERA Connect] (p. 17)
Displays VIERA Connect home screen
17 Exit
Returns to the normal viewing screen
18 [Media Player] (p. 48)
Switches to SD Card and USB device
viewing / listening mode
19 Cursor buttons
Makes selections and adjustments
20 Return
Returns to the previous menu / page
21 Coloured buttons
Used for the selection, navigation and
operation of various functions
22 Hold
Freeze / unfreeze picture (p. 18)
Holds the current teletext page (teletext
mode)∗ (p. 21)
23 Index∗ (p. 21)
Returns to the teletext index page (teletext
mode)
24 Last View (p. 19)
Switches to previously viewed channel or
input modes
25 Channel Up / Down
Selects channel in sequence
26 Connected equipment operations
(p. 24, 55)
Some countries do not provide a teletext service
(p. 19)
12
Auto Tuning
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.
Plug the TV into mains socket and switch On
POWER
INFO
OPTION
R Y
ghi
MUTE
POWER
SD CARD
TV AV
G B
STTLTEXT
INDEX HOLD
abc def
jk l
tuvpqrs
INPUT
ASPECTMENU
EXIT
wxyz
LAST VIEW
CHVOL
CH
REC
RETURN
mno
1
Select your language
2
OSD Language
English
Select your country
3
Country
United Arab Emirates
Select your area
4
Channel Plan
Auto Tuning starts
Auto Tuning
2
Scan
You can now use the remote control to turn On the TV or
switch the TV to Standby mode. (Power LED: On)
select
Tiếng Việt
Indonesia
Thailand Vietnam
Asia/W.Europe
CIS/E.Europe
China
Hong Kong
NZ/Indonesia
CATV/Other
Français
MalaysiaIndia
IndonesiaSingapore
Saudi Arabia
OthersKuwait
When selecting CATV / Other, press the OK button, and then select the Channel Plan from Indian CATV, South Africa,
set
select
set
select
access
American System, American CATV or Japan.
Auto Tuning will start to search
EXIT
RETURN
1
CH4
for TV channels and store them.
120
The sorted channel order depends upon the TV signal, the broadcasting system and reception conditions.
Auto Tuning
TV
Setup the network connection
5
Select the network type
Network Setup
Select Wired or Wireless
Wired Wireless
Set later
[Wired]: wired connection
(p. 15)
[Wireless]: wireless connection
(p. 16)
select access
To setup later on or skip this step
Select [Set later] or
EXIT
13
Select [Home]
6
Please select your viewing environment.
Home Shop
select confirm
Auto Tuning is completed
Viewing environment mode
Home : Recommended mode for viewing at home. Select [Home] for optimal picture / power
consumption. [Viewing Mode] is set as [Normal] (p. 34).
Shop : Demonstration mode to explain main features of this TV (for in-store display). [Viewing Mode] is
set as [Dynamic] (p. 34).
To return to viewing environment selection mode if you selected [Shop]
Shop
Auto Tuning
You have selected shop mode
To change viewing environment mode later on, reset all settings by accessing Shipping Condition.
[Shipping Condition] (p. 47)
If you connect the Wireless LAN Adaptor later on, the confirmation screen will be displayed for the setup
Wireless LAN adaptor connection
Wireless LAN adaptor connected, do you want to set it up? No - Exit
Current network type : Wireless
Yes
RETURN
Automatic Demo
Off On
To setup the Wireless LAN connection (p. 63)
No
Please select your viewing environment.
Home Shop
RETURN
14
Setup the network connection
Set up the network connection to enable the network service functions such as VIERA Connect, etc. (p. 17, 67).
To set up the wireless connection, the Wireless LAN Adaptor is required.
Please note that this TV does not support wireless public access points.
Ensure the network connections and network environment are completed before starting setup.
Connect the LAN cable or Wireless LAN Adaptor
1
To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network environment.
Rear of the TV
Wireless connection
Wireless LAN Adaptor
“Optional accessories” (p. 8)
Connect to the
USB 1, 2 or 3 port.
Access point
or
Wired connection
LAN cable
If you do not have any broadband network services, please consult your retailer for assistance.
For more information of the network connections (p. 59)
Select [Wired] or [Wireless]
2
Network Setup
Select Wired or Wireless
Wired Wireless
Set later
select access
Start the settings
3
■ [Wired]
Select [Auto]
Acquire IP Address
Auto Manual
select access
To set manually, select [Manual]
and set each item. For details (p. 61)
Connection Test
Check network cable connection. Check acquired IP address. Check for devices using same IP address. Check gateway connection. Check server connection.
Automatically setup is done and the test of the network connection starts.
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections, and then select [Retry].
Internet
environment
Internet
environment
Auto Tuning
15
■ [Wireless]
3
Select the connection type
Connection Type
Please select network connection type.
Search for access point
WPS(Push button)
select
confirm
■ [Search for access point]
Access points found automatically are listed.
Available Access Points
No.
SSID Wireless type Encrypt
1 Access Point A 11n(2.4GHz)
2 Access Point B 11n(5GHz)
3 Access Point C 11n(5GHz)
1 Select your desired access point
Reception
select
access
Auto Tuning
Encryption Key Setting
Connection will be made with the following settings:­SSID : Access Point A Authentication type : WPA-PSK Encryption type : TKIP
Please input the encryption key.
Encryption key
Access Point Settings
Encryption key
A B C D E F G H I J K L M N U V W X Y Z 0 1 2 3 4 5 6 a b c d e f g h i j k l m n u v w x y z ( ) + - . * _
Access Point Settings
Encryption key is set to:­XXXXXXXX
Select ‘Yes’ to confirm. Select ‘No’ to change.
Yes
O P Q R S T 7 8 9 ! : # o p q r s t
No
■ [WPS(Push button)]
WPS(Push button)
1) Please press the ‘WPS’ button on the access
1) Please press the ‘WPS’ button on the access
point until its light flashes.
point until its light ashes.
2) When the light is ashing select ‘Connect’ on
2) When the light is flashing select ‘Connect’ on TV.
TV.
If you are unsure, please check the instruction
If you are unsure, please check the instruction
manual of the access point.
manual of the access point.
Perform the connection test after the access point setting is finished
Complete the network connection
4
Connect
Connection Test
Check access point connection. Check acquired IP address. Check for devices using same IP address. Check gateway connection. Check server connection.
2 Access the encryption key input mode
If the selected access point is not encrypted, the confirmation
screen will be displayed. It is recommended to select the encrypted access point.
3 Enter the encryption key of the access point
(Set characters one by one)
select
set
You can set characters by using numeric buttons.
4 Select [Yes]
select set
To re-enter the encryption key, select [No].
If the connection has failed, check the encryption key, settings
and positions of your access point. And then, follow the on screen instructions.
Press the WPS button on the access point until the light flashes. And then, press the OK button to connect the Wireless LAN Adaptor and the access point.
Ensure that your access point supports WPS for this method.
WPS: Wi-Fi Protected Setup™
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections, and then select [Retry].
To set manually, select [Manual] and set each item.
For details
If your access point supports WPS (Push button), then select this option. If not, select [Search for access point].
To search access points again
For the information of the highlighted access point
To set manually (p. 63)
RETURN
Store
Y
INFO
R
(p. 63)
16
(Press twice)
Using “VIERA Connect”
VIERA Connect is a gateway to the internet services unique to Panasonic and has expanded VIERA CAST features greatly. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as photos, videos, games, etc. from VIERA Connect home screen.
This TV has no full browser function and all features of websites may not be available.
Turn power on
POWER
INFO
SD CARD
INPUT
TV AV
ASPECTMENU
EXIT
1
Mains power On / Off switch should be
On. (p. 11)
Every time you turn on the TV, VIERA Connect
OPTION
R G Y B
STTLTEXT
INDEX HOLD
abc def
jk l
ghi
tuvpqrs
To exit from VIERA Connect
EXIT
To set the
VIERA Connect instruction
RETURN
mno
wxyz
Enjoy selected internet content with VIERA Connect.
Simply press the OK / INTERNET button
Access VIERA Connect
2
While the banner is displayed
Example:
Welcome to VIERA Connect™
VIERA Connect™ home screen is subject to change without notice.
The services through VIERA Connect™ are operated by their respective service providers, and service
may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make
no warranty for the content or the continuity of the services.
All features of websites or content of the service may not be available.
Don’t show this message again
Some content may only be available for specific countries and may be presented in specific languages.
ENTER
Some content may be inappropriate for some viewers.
Example: VIERA Connect home screen
introduction banner appears. The banner is subject to change.
The button design
INTERNET
or
Depending on the usage conditions, it may
take a while to read all the data. Messages might be displayed before
VIERA Connect home screen.
varies depending on the remote control.
Please read these instructions carefully and follow the on screen instructions.
To go to the next level
[MORE]
To back to the previous level
[BACK]
banner display off
[VIERA Connect
Banner] (p. 41)
MORE
BACK
■ How to operate VIERA Connect (current as of January, 2011)
To move the cursor / select the item
When the key words are displayed on
colour bar
B
R G Y
Video communication requires an exclusive Communication Camera TY-CC10W.
“Optional accessories” (p. 8)
For details, read the manual of the Communication Camera. You can connect a keyboard and a gamepad via USB port for character input and playing games in VIERA Connect.
You can also operate the TV with a keyboard or a gamepad other than VIERA Connect features. For more information “USB connection” (p. 83)
Note
If you cannot access VIERA Connect, check the network connections and settings (p. 15 - 16).
For more information of VIERA Connect (p. 67)
To access
When options with
numbers are displayed
abc def
jk l
ghi
mno
tuvpqrs
wxyz
To return to the previous screen
RETURN
To return to VIERA Connect
home screen
INTERNET
Using “VIERA Connect”
17
Watching TV
POWER
INFO
OPTION
Watching TV
When the TV is
switched to standby, there will be a clicking sound after a short delay. This is normal.
Other useful functions
Freeze / unfreeze picture
HOLD
MENU ASPECT
ghi
Hold
INPUT
TV
HOLD
abc def
jk l
tuvpqrs
LAST VIEW
CH
EXIT
mno
wxyz
Mains power On / Off switch should
Turn power on
1
be On. (p. 11)
■ VIERA Connect banner appears
You can access to VIERA Connect and enjoy the various contents.
To remove this banner, leave for about 5 seconds
or press any buttons (except the buttons to access VIERA Connect). To set this banner display off
[VIERA Connect Banner] (p. 41)
Select TV mode
2
Select a channel
3
up
CH
down
abc def
jk l
ghi
tuvpqrs
or
To select the two-digit channel
mno
number, e.g. 35
wxyz
def
If one-digit channel number
jk l
(in a short time)
(quickly changes the channel)
Off Timer
Turn the TV off automatically after a fixed period of time [Off / 15 / 30 / 45 / 60 / 75 / 90 minutes]
1 Display
the menu
MENU
2 Select [Timer] 3 Select [Off Timer] and set the time
[Off Timer]
Off
15 30 45 60 75 90
minutes minutes minutes minutes minutes minutes
select the time
store
Main Menu
Picture
Sound
Timer
Setup
Off Timer
Auto Standby
select
access
To cancel Set to [Off] or turn the TV off.
To display the remaining time “Display Information banner” (p. 19)
When the remaining time is within 3 minutes, the remaining time will
flash on screen.
18
Display Information banner
Display Information banner
INFO
Also appears when changing a channel
, ,
, Audio mode (p. 79)
II
Sound mute On
To hide
EXIT
TV
1
CH08
5.5MHz
PAL
16:9
1 - 90 Off Timer remaining time
Teletext
(varies depending on the broadcasters) Teletext service available
Input mode Channel position Channel number Sound system Colour system Aspect ratio
For settings (p. 18)
Display the selectable settings for the current programme
1 Check or change the current
programme status instantly
OPTION
[Channel Colour Set] Sets colour density [Picture Menu] (p. 34)
[Teletext Character Set]
Sets the teletext language
[MPX]
Selects multiplex sound (if available)
[Volume Correction] Adjusts the volume of an individual channel or input mode [Sound Menu] (p. 37)
[Setup Menu] (p. 41)
2 Select 3 Change
select
access
[Sound Menu] (p. 38)
select / change
Watching TV
store
Last view
Switch to previously viewed channel or input mode easily
Press again to return to the present view.
LAST VIEW
Note
Watching less than 10 seconds is not regarded as the previously viewed channel or input mode.
19
Change aspect ratio
Enjoy viewing the image at its optimum size and aspect.
Press repeatedly until you reach the desired mode
ASPECT
■ If Aspect Selection list is displayed
1 Display Aspect Selection list 2 While the list is displayed, select the mode
ASPECT
[16:9] [14:9] [Just]
[4:3] [4:3 Full] [Zoom1]
Watching TV
[Zoom2] [Zoom3]
Note
Only [16:9] and [4:3] are available in PC input mode.
Aspect is fixed to [16:9] when [Viewing Mode] is set to [Game] in the Picture Menu.
Not available in teletext service.
Aspect mode can be memorised separately for each SD (Standard definition) and HD (High definition)
signals.
Aspect Selection
16:9
14:9 Just 4:3 4:3 Full Zoom1 Zoom2 Zoom3
Change
Select
EXIT
RETURN
Aspect Selection
16:9
14:9 Just 4:3 4:3 Full Zoom1 Zoom2 Zoom3
Directly displays the image at 16:9 without distortion (anamorphic).
Displays the image at the standard 4:3 without distortion.
Displays a 16:9 letterbox (anamorphic) image full-screen without distortion.
select
change
Displays the image at the standard 14:9 without distortion.
Displays a 4:3 image full-screen. Stretching is only noticeable at the left and right edges.
Displays a 4:3 image enlarged horizontally to fit the screen.
HD signal only
Displays a 16:9 letterbox or 4:3 image without distortion.
Displays a 2.35:1 letterbox (anamorphic) image full-screen without distortion. At 16:9, displays the image at its maximum (with slight enlargement).
Change OSD language
You can change language for on screen displays.
1 Display
the menu
MENU
2 Select [Setup] 3 Select [OSD Language]
Main Menu
Picture
Sound
Timer
Setup
4 Select the language and set
OSD Language
English
Tiếng Việt
Indonesia
Français
20
select
access
select
set
Eco Navigation Child Lock Tuning Menu
OSD Language
Display Settings VIERA Link Settings Network Setup DivX® VOD System Menu
Access
1/2
select
access
Viewing Teletext
Teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters.
What is FASTEXT mode?
In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriately coloured button. This facility enables fast access to information on the subjects shown.
What is List mode?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these numbers can be altered and stored in the TV’s memory. (“Store frequently viewed pages” p. 22)
■ To change mode [Teletext] in the Setup Menu (p. 41)
Sub page number
<< 01 02 03 04 05 06 07 >>
TELETEXT
INFORMATION
Current page number
R G Y B
CH
or
(Corresponds to the colour bar)
17:51 28 Feb
Time / date
Colour bar
MENU
RGYB
TEXT F.P.
INDEX HOLD
abc def
ghi
jk l
tuvpqrs
EXIT
mno
wxyz
Switch to Teletext
1
Displays the index page
(content varies depending on the broadcasters)
Select the page
2
abc def
jk l
ghi
mno
tuvpqrs
wxyz
or
■ To adjust contrast
MENU
(press three times) As the blue bar is displayed
■ To return to TV
TEXT
up
down
or
or
EXIT
Viewing Teletext
CH
TV
Functions (Teletext mode)
HOLD Reveal hidden data
Stop automatic updating
HOLD
(If you wish to hold the current page without updating)
■ To resume
HOLD
MENU
R
Reveal hidden words e.g. quiz page answers
■ To hide
INDEX Call up a favourite page
Return to the main index page
INDEX
View a favourite page stored
F.P.
Call up the page stored on the blue button
(List mode). Factory setting is “P103”.
R
21
View in multi window
Watch TV and Teletext in two windows at once
MENU
(press twice)
Operations can be made only in Teletext screen.
Select Picture and text On or Off
FULL / TOP / BOTTOM
MENU
G
(TOP) (BOTTOM) Normal (FULL)
(Expand the TOP half)
(Expand the BOTTOM half)
Store frequently viewed pages
Store frequently viewed pages in the colour bar (List mode only)
Corresponding colour button (As page is displayed)
Viewing Teletext
■ To change stored pages
Coloured button you want to change
press and hold
abc def
Enter
jk l
ghi
mno
new page
tuvpqrs
wxyz
number
press and hold
View sub page
View sub page (Only when teletext is more than one page)
Appears at top of the screen
■ To view specific sub page
MENU
Sub pages:
The number of sub pages varies depending on the broadcasters. It may take some time for searching, during which time you can watch TV.
Watch TV while waiting for update
View the TV picture while searching for a teletext page
Teletext automatically updates itself when new information becomes available.
MENU
B
Enter the 4-digit number example : P6
Y
P108
Appears when
mno
Y
View the updated page
updating is completed
The number changes to white.
Changes to TV screen temporarily (You cannot change the programme.)
The news page provides a function that indicates arrival of latest news (“News Flash”).
22
Watching External Inputs
Connect the external equipment (VCRs, DVD equipment, PC, etc.) and you can watch through the input.
To connect the equipment (p. 10, 73 - 75)
Display the input selection menu
1
When viewing PC PC ( skip to 3)
Select the input mode connected to the
2
equipment
Example (AV2)
Input Selection
AV1
AV2
AV3 PC HDMI1 HDMI2 HDMI3 TV SD Card/USB
You can also select the input using the AV button on the remote
control or the side panel of the TV (p. 11). Press the button repeatedly until the desired input is selected. You can label or skip each input mode [Input Labels] (p. 46)
Skipped inputs will not be displayed when the AV button is pressed.
View
3
Example (AV2)
AV2 PAL 16:9
select
watch
If the external equipment has an aspect adjustment function, set to [16:9].
ghi
POWER
PC
INPUT
TV AV
abc def
jk l
tuvpqrs
CH
REC
mno
wxyz
Watching External Inputs
TV
■ To return to TV
TV
Displays the selected mode
Example (PC)
PC 640X480 / 60Hz 16:9
Displays the selected mode
You can also listen to PC sound with
the audio cable connected. To connect (p. 75) You can setup some functions
PC Setup (p. 40) in the Setup Menu.
For HDMI-compatible PC, possible to
connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3) by using HDMI cable (p. 77, 78).
23
Operating the equipment with the TV remote control
The Panasonic equipment connected to the TV can be directly operated with the below buttons of this TV remote control.
POWER
CH
REC
How to change the code for the type of the equipment
Each type of Panasonic equipment has its own remote control code. Please change the code for each equipment you want to operate.
Watching External Inputs
If you operate in Video mode of Media Player (p. 55) or the connected equipment in VIERA Link (p. 71), select the code “73”.
Press and hold
Enter the appropriate code (see table below)
DVD Recorder / DVD Player 70 (default)
Player theatre / Blu-ray Disc theatre 71
Using in Video mode of Media Player
The equipment using in VIERA Link
“VIERA Link Control” (p. 71)
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operation
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse DVD / video content: Skip to the previous track, title or chapter
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward DVD / video content: Skip to the next track, title or chapter
Press and hold to search forward
Pause
Pause / Resume DVD: Press and hold to play at slow speed
Programme Up / Down
Select programme
Record
Start recording
POWER
during the following operations
abc def
jk l
ghi
mno
tuvpqrs
Press
wxyz
Type of the equipment Code
VCR 72
(p. 55)
73
Note
Confirm if the remote control works correctly after changing the code.
The codes may be reset to default values if batteries are replaced.
Some operations may not be possible on some equipment models.
24
Viewing 3D images
You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear. “Optional accessories” (p. 8) This TV supports [Frame Sequential]
1: The 3D format that the images for the left and right eyes are recorded with the high definition quality
and alternately played back
2, ∗3: Other available 3D formats
Warning
About Prevention of Accidental Ingestion
Do not store any 3D Eyewear parts in places where small children can reach.
There is a danger small children could swallow such parts by mistake.
• If a child accidentally swallows such parts, seek immediate medical attention.
About Prohibition of Disassembly
Do not disassemble or modify the 3D Eyewear.
Caution
About 3D Eyewear
Do not drop, exert pressure on, or step on the 3D Eyewear.
Doing so may damage the glass section, which may result in injury.
• Always store the 3D Eyewear in the case provided when not in use.
Be careful of the tips of the frame when putting on the 3D Eyewear.
Accidentally inserting the tip of the frame into the eye may cause injury.
Always keep the 3D Eyewear in a cool, dry place.
Failure to do so may cause fire or electric shock.
Be careful not to trap a finger in the hinge section of the 3D Eyewear.
Doing so may result in injury.
• Pay special attention when children are using this product.
About Viewing of 3D Images
In the event that you experience dizziness, nausea, or other discomfort while viewing 3D
images, discontinue use and rest your eyes.
When you set the effect by using [3D Adjustment], take into account that the vision of 3D images varies among different individuals.
Do not use the 3D Eyewear if you have a history of oversensitivity to light, heart problems, or
have any other existing medical condition.
Using the 3D Eyewear may cause the symptoms to worsen.
Stop using the 3D Eyewear immediately if you feel tired, discomfort, or any other abnormality.
Continuing to use the 3D Eyewear in such cases may cause you to feel unwell. Please take the necessary rest before continuing use.
When watching 3D movies, take an appropriate length break after watching a movie.
When watching 3D content on interactive devices such as 3D games or computers, take an
appropriate length break after using for 30 - 60 minutes.
Prolonged use may cause eyesight fatigue.
When using the 3D Eyewear, be careful not to strike the television screen or other people by
mistake.
As the images are in 3D, the distance between the user and screen may be mistaken, causing the user to strike the screen which may result in injury.
Use the 3D Eyewear when viewing 3D images.
When using the 3D Eyewear, make sure your eyes are on an approximately horizontal level.
If you suffer from myopia (short-sightedness), hyperopia (far-sightedness), astigmatism, or
have eyesight differences between the left and right eyes, please use corrective glasses or other such methods to correct your eyesight before putting on the 3D Eyewear. Stop using the 3D Eyewear if you can clearly see double images when viewing 3D content.
Prolonged use may cause eyesight fatigue.
View the screen at a distance at least 3 times further than the effective height of the screen.
Recommended distance: For a 42-inch television, 1.6 m or more. For a 50-inch television, 1.9 m or more. Using the 3D Eyewear at a distance closer than the recommended distance may cause eyesight fatigue.
1
, [Side by Side]
2
and [Top and Bottom]
3
3D formats.
Viewing 3D images
25
Using 3D Eyewear
As a guide, 3D Eyewear should not be used by children younger than about 5 - 6 years old.
As it is difficult to judge younger children’s reactions to fatigue or discomfort, it may be difficult to prevent them from suddenly feeling unwell.
• When this product is being used by a child, the parent or guardian should check to ensure that the child’s eyes are not becoming tired.
When using the 3D Eyewear, do not place breakable objects near to the user.
The user may mistake the 3D objects they are viewing as real objects causing them to move, which may cause damage to surrounding objects that may lead to injury.
Do not move around while wearing the 3D Eyewear.
The surrounding area appears dark, which may result in falling or other accidents that may cause injury.
Only use the 3D Eyewear for the specified purpose.
Do not use if the 3D Eyewear is cracked or broken.
Doing so may result in injury or eyesight fatigue.
If a malfunction or fault occurs in the 3D Eyewear, stop use immediately.
Continuing to use the 3D Eyewear may result in injury, eyesight fatigue, or may cause you to feel unwell.
Stop using the 3D Eyewear immediately if your skin feels unusual.
In rare cases, the paint or materials used in the 3D Eyewear may cause an allergic reaction.
Stop using the 3D Eyewear immediately if you experience any redness, pain, or itching on the
nose or temples.
Prolonged use may cause such symptoms due to excess pressure, which may result in the user feeling unwell.
Viewing 3D images
26
Using Precautions
Infra-red receiver section
Do not soil the infra-red receiver section or attach stickers etc. to it.
• Doing so may prevent the receiver from receiving signals from the television, which may prevent the 3D Eyewear from operating normally.
If the 3D Eyewear is affected by other infra-red data communication equipment, the 3D images
may not be displayed correctly.
Cautions during viewing
Do not use devices that emit strong electromagnetic waves (such as cellular phones or personal
transceivers) near the 3D Eyewear. Doing so may cause the 3D Eyewear to malfunction. If the 3D Eyewear is used in a room in which fluorescent lights (50 Hz) are used, the light within
the room may appear to be flickering. In this case, either darken or switch off the fluorescent lights when using the 3D Eyewear. Wear the 3D Eyewear correctly. 3D images will not be correctly visible if the 3D Eyewear is worn
upside down or back-to-front. Other kinds of displays (such as computer screens, digital clocks, or calculators etc.) may
be difficult to see while wearing the 3D Eyewear. Do not wear the 3D Eyewear when watching anything other than 3D images.
Viewing 3D images
27
Loading...
+ 61 hidden pages