Panasonic tc-60put54 Operation Manual

USA Only: Disposal may be regulated in your community due to
environmental considerations. For disposal or recycling information,
please visit Panasonic website: http://www.panasonic.com/environmental
or call 1-888-769-0149.

Sólo Estados Unidos: La disposición puede estar regulada en su
comunidad debido a consideraciones ambientales. Para información
sobre la disposición o reciclaje, por favor visite la página web de
Panasonic: http://www.panasonic.com/environmental
o llame al 1-888-769-0149.

Customer’s Record

The model number and serial number of this product can be found on its back cover. You should note this serial number in
the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid
in identification in the event of theft or loss, and for Warranty Service purposes.

Model Number Serial Number

Anotación del cliente

El modelo y el número de serie de este producto se encuentran en su panel posterior. Deberá anotarlos en el espacio
provisto a continuación y guardar este manual, más el recibo de su compra, como prueba permanente de su adquisición,
para que le sirva de ayuda al identificarlo en el caso de que le sea sustraído o lo pierda, y también para disponer de los
servicios que le ofrece la garantía.

Modelo Número de serie

Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America

One Panasonic Way, Secaucus
New Jersey 07094 U.S.A.

©

2012 Panasonic Corporation of North America. All Rights Reserved.

©

2012 Panasonic Corporation of North America. Todos los Derechos Reservados.

Panasonic Canada Inc.

5770 Ambler Drive
Mississauga, Ontario
L4W 2T3 CANADA

Printed in U.S.A.

Impreso en EE.UU.

M0512-0

Scan, watch and discover how to
get the most out of your TV

Escanee, observe y descubra como
obtener el máximo de su TV

http://rd.pnaqr.com/TC-60PUT54/2/1/

Owner’s Manual

60” Class 1080p Plasma HDTV

(60.1 inches measured diagonally)

Manual de usuario

Televisión de alta definición de 1080p y
clase 60” de Plasma

(60,1 pulgadas medidas diagonalmente)

Model No.

Número de modelo

TC-60PUT54

For assistance (U.S.A./Puerto Rico), please call:

1-877-95-VIERA (958-4372)

www.panasonic.com/help

For assistance (Canada), please call:

1-866-330-0014

concierge.panasonic.ca

Para solicitar ayuda (EE.UU./Puerto Rico), llame al:

1-877-95-VIERA (958-4372)

www.panasonic.com/help

English

Español

Thank you for purchasing this Panasonic product.
Please read these instructions before operating your set and retain them for future
reference. The images shown in this manual are for illustrative purposes only.

Gracias por su decisión de comprar este producto marca Panasonic.
Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en
el futuro. Las imágenes mostradas en este manual tienen solamente fines ilustrativos.

manual electrónico(eAyuda)

TQB2AA0667

This product incorporates the following software or technology:

(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) the software based in part on the work of the Independent JPEG Group,
(4) the software developed by the FreeType Project,
(5) the software licensed under the GNU LESSER GENERAL PUBLIC LICENSE (LGPL) and/or,
(6) open sourced software other than the software licensed under the LGPL.
(7) “PlayReady”(digital right management technology) licensed by Microsoft Corporation or its affiliates.

For the software categorized as (5), please refer to the terms and conditions of LGPL, as the case may be at
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
In addition, the software categorized as (5) are copyrighted by several individuals.
Please refer to the copyright notice of those individuals at
http://www.am-linux.jp/dl/DTV12U/
The LGPL software is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic will give to any third party who contact us at the contact information
provided below, for a charge no more than our cost of physically performing source code distribution,
a complete machine-readable copy of the corresponding source code covered under LGPL.
Contact Information
[e-mail]
Source code covered under LGPL is also freely available to you and any other member of the public via our website below.
http://www.am-linux.jp/dl/DTV12U/

For the software categorized as (5) and (6), please refer to the applicable license terms included in the “Setup” menu on product.

Further, for PlayReady categorized as (7), please be aware of the following.
(a) This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this
technology outside of this product is prohibited without the appropriate license(s) from Microsoft.
(b) Content owners use Microsoft PlayReady(TM) content access technology to protect their intellectual property, including
copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or
WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require
Microsoft to revoke the device’s ability to consume PlayReady-protected content. Revocation should not affect unprotected
content or content protected by other content access technologies.
Content owners may require you to upgrade PlayReady to access their content.
If you decline an upgrade, you will not be able to access content that requires the upgrade.

This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to
(i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a
consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide
AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA,
LLC.
See http://www.mpegla.com.

■Do not display a still picture for a long time

This causes the image to remain on the plasma screen
(“Image retention”). This is not considered a malfunction and is not covered by the warranty.

4 : 3

Typical still images

Channel number and other logos

●

Image displayed in 4:3 mode

●

SD Card photo ●Video game ●Computer image

●

12

To prevent the “Image retention”, the screen saver is
automatically activated after a few minutes if no signals are
sent or no operations are performed.

■Set up

Do not place the unit where it’s exposed to sunlight or other bright light (including reflections).

●

Use of some types of fluorescent lighting may reduce the remote control’s transmission range.

●

2

VIERA Link™ is a trademark of
Panasonic Corporation.

HDMI, the HDMI logo and High­Definition Multimedia Interface are
trademarks or registered trademarks
of HDMI Licensing LLC in the United
States and other countries.

Contents

SDXC Logo is a trademark of SD­3C, LLC.

“AVCHD” and the “AVCHD” logo
are trademarks of Panasonic
Corporation and Sony Corporation.

“RealD 3D” is a trademark of RealD.

“Full HD 3D Glasses™” logo and
“Full HD 3D Glasses™” word are
trademark of Full HD 3D Glasses
Initiative.

DLNA®, the DLNA Logo and DLNA
CERTIFIED™ are trademarks,
service marks, or certification
marks of the Digital Living Network
Alliance.

QuickTime and the QuickTime
logo are trademarks or registered
trademarks of Apple Inc., used
under license there from.

The Bluetooth
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Panasonic Corporation is under license.
Other trademarks and trade names are those of their
respective owners.

Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.

HDAVI Control™ is a trademark of Panasonic Corporation.

Skype™ is a trademark of Skype limited.

®

word mark and logos are registered

Please read before using the unit

Safety Precautions··········································4

•

Accessories/Optional Accessories ·················· 8

•

Connections ·················································· 11

•

Identifying Controls ·······································13

•

First Time Setup············································14

•

Viewing 3D images on TV ····························15

•

Using eHELP (built-in Manual) ·····················16

•

Frequently Asked Questions (FAQ) ··············17

•

Care and Cleaning ······································ ·17

•

Specifications ··············································· 18

•

Limited Warranty

•

(for U.S.A. and Puerto Rico only) ·················19
Customer Services Directory

•

(for U.S.A. and Puerto Rico) ·························20
Limited Warranty (for Canada) ·····················21

•

3

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.

WARNING:

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set
(including on shelves above, etc.).

DO NOT OPEN

Important Safety Instructions

11) Only use attachments / accessories specified by the
manufacturer.

12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart / apparatus combination to
avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when
unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.

15) To prevent electric shock, ensure the grounding pin on the
AC cord power plug is securely connected.

The lightning flash with
arrowhead within a triangle is
intended to tell the user that
parts inside the product are a risk
of electric shock to persons.

The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are in
the papers with the appliance.

WARNING

Small parts can present choking hazard if accidentally
swallowed.
Keep small parts away from young children.
Discard unneeded small parts and other objects,
including packaging materials and plastic bags/sheets to
prevent them from being played with by young children,
creating the potential risk of suffocation.

■Set up

This Plasma TV may fall and can cause personal injury or

even death if not installed correctly. To prevent personal
injury or death, follow these warnings:

Install the Plasma TV in accordance with the

●

manufacturer’s recommended pedestal or stand,
corresponding hardware and installation instructions.

This Plasma TV is for use only with the following

optional accessories. Use with any other type of optional
accessories may cause instability. The following accessories
are manufactured by Panasonic Corporation.

• Wall-hanging bracket (Angled)

TY-WK5P1RW

Be sure to ask a qualified technician to carry out the

●

installation and set-up.

Two or more people are required to install or remove the

television.

4

WARNING/CAUTION (TV set)

Some wall mounts (wall-hanging brackets) are not

●

designed to be mounted to walls with steel studs or old
cinder block constructions.

Ask your dealer or licensed contractor to properly secure

the wall-hanging bracket.

Do not route the TV’s power cord inside the wall.

●

The power cord was not designed for in-wall mounting.

Doing so can lead to fire hazard.

Do not place the Plasma TV or its stand on a sloped or

●

unstable surface.

The Plasma TV may fall or tip over.

Do not support the Plasma TV on a non-specified

●

pedestal.
Do not place the Plasma TV on furniture that can easily

●

be used as steps, such as a chest of drawers.
Do not climb or allow children to climb on the Plasma TV

●

Place or install the Plasma TV where it cannot be

●

pushed, pulled over or knocked down.
Route all cords and cables such that they cannot be

●

tripped over or pulled by curious children.
Do not place any objects on top of the Plasma TV.

●

If water spills onto the Plasma TV or foreign objects get

inside it, a short-circuit may occur, which could result in
fire or electric shock. If any foreign objects get inside the
Plasma TV, please consult an Authorized Service Center.

In the unlikely event that you receive a shock from this

●

product, it is possible that your household outlet may
be wired improperly.

Have an electrician verify that the TV’s outlet is properly

wired. If the symptom persists, have the TV serviced by a
qualified authorized technician.

To prevent the spread of fire, keep candles

●

or other open flames away from this
product at all times

■AC Power Supply Cord

To prevent fire or electric shock:

The Plasma TV is designed to operate on a 120 V AC,

●

60 Hz service. Insert the power cord plug as far as it will
go into the wall socket.

If the plug is not fully inserted, heat may generate, which

could cause a fire.

The included power cord is for use with this unit only.

●

Do not use any power cord other than that provided

●

with this TV.
Do not handle the power cord plug with wet hands.

●

Do not do anything that might damage the power

●

supply cord.
When disconnecting the power supply cord, hold the

●

plug, not the cord.
Do not use the power supply cord if the plug or cord is

●

damaged.

Replace the cord or contact your Authorized Service Center.

Do not use a 3-prong to 2-prong AC plug adapters to

●

connect your TV’s plug to the wall outlet.

Doing so will defeat the TV plug’s safety feature, which

can lead to a shock hazard. If the wall outlet does not
accommodate a 3-prong plug, have a qualified electrician
replace your outlet and check the associated wiring.

■Handling the power supply cord

Insert the power plug fully into the socket outlet. (If the

●

power plug is loose, it could generate heat and cause fire.)
Ensure that the power plug is easily accessible.

●

Ensure the earth pin on the power plug is securely

●

connected to prevent electrical shock.

• An apparatus with CLASS I construction shall be
connected to a power socket outlet with a protective
earthing connection.

Do not touch the power plug with a wet hand. (This may

●

cause electrical shock.)
Do not use any power cord other than that provided

●

with this TV. (This may cause fire or electrical shock.)
Do not damage the power cord. (A damaged cord may

●

cause fire or electrical shock.)

• Do not move the TV with the cord plugged in the socket outlet.

• Do not place a heavy object on the cord or place the cord
near a high-temperature object.

• Do not twist the cord, bend it excessively, or stretch it.

• Do not pull on the cord. Hold onto the power plug body
when disconnecting cord.

• Do not use a damaged power plug or socket outlet.

If a problem occurs (such as no picture or no sound),

●

or if smoke or an abnormal odor is detected from the
Plasma TV, unplug the power supply cord immediately.

Continued use of the TV under these conditions might

cause a fire or permanent damage to the TV. Have the TV
evaluated by an Authorized Service Center. Servicing of the
TV by unauthorized personnel is strongly discouraged due
to its high voltage.

If water or an object gets inside the Plasma TV, if the

●

Plasma TV is dropped, or if the enclosure becomes
damaged, unplug the power supply cord immediately.

A short-circuit may occur, which could cause a fire. Contact

an Authorized Service Center for an evaluation.

■Radio waves

Do not place this TV in any medical institutions or

●

locations with medical devices.

Radio waves from this TV may interfere with the medical

devices and cause accidents due to the malfunction.

Do not use this TV near any automatic control devices

●

such as automatic doors or fire alarms.

Radio waves from this TV may interfere with the automatic

control devices and cause accidents due to the malfunction.

Keep this TV away at least 9 inches (22 cm) from the

●

location where a cardiac pacemaker is implanted.

Radio waves from this TV may interfere with the operation

of the pacemaker.

CAUTION

Do not cover the ventilation holes.

●

Doing so may cause the Plasma TV to overheat, which can

cause a fire or damage to the Plasma TV.

Leave a space of 3 15/16” (10 cm) or more at the top,

●

left and right, and 2 3/4” (7 cm) or more at the rear.
When using the pedestal, keep the space between the

●

bottom of the TV and the pedestal or stand surface
clear from objects that may obstruct ventilation.

■When Moving the Plasma TV

Be sure to disconnect all cables before moving the

●

Plasma TV.

Moving the TV with its cables attached might damage the

cables which, in turn, can cause fire or electric shock.

To prevent an electric shock, disconnect the power

●

plug from the wall outlet as a safety precaution before
carrying out any cleaning.

Transport only in upright position.

●

Transporting the unit with its display panel facing upright or

downward may cause damage to the internal circuitry.

Using a dry cloth, clean any dust from the power supply

●

cord and plug regularly.

Build-up of dust on the power cord plug can increase

humidity, which might damage the insulation and cause a
fire.

This Plasma TV radiates infrared rays;

therefore, it may affect other infrared communication

equipment. Install your infrared sensor in a place away from
direct or reflected light from your Plasma TV.

The TV will still consume some power as long as the
power supply cord is connected to the wall outlet.

Display panel is made of glass. Do not apply strong

●

force or impact to the display panel.

This may cause damage resulting in injury.

The TV is heavy. TV should be handled by 2 or more

●

people. Support as shown to avoid injury by the TV
tipping or falling.

5

WARNING/CAUTION (3D Eyewear)

WARNING

■Accidental Ingestion

Keep 3D Eyewear parts in places out of the reach of children.

●

There is a danger small children could swallow such parts by mistake.

• If a child accidentally swallows such parts, seek

immediate medical attention.

■Place

Do not use 3D Eyewear in hospital or other medical facilities.

●

Radio waves from 3D Eyewear may cause interference of
medical equipments

Do not use 3D Eyewear nearby automatic control equipments,

●

like an automatic door, a fire alarm apparatus, etc.

Radio waves from 3D Eyewear may cause interference of

automatic control equipments.

Keep 3D Eyewear more than 9 inches (22 cm) away

●

from the implant of cardiac pacemaker, or similar
implantable medical equipments, at all times.

Radio waves from 3D Eyewear may affect implantable

cardiac pacemaker or similar equipment operations.

.

■Disassembly

Do not disassemble or modify the 3D Eyewear.

●

CAUTION

■3D Eyewear

Handle the 3D Eyewear carefully and store in the case

●

when not in use.

Failure to do so may damage the Eyewear and glass

section, which may result in injury.

Handle the tips of the frame carefully when putting on

●

the 3D Eyewear as inserting the tip of the frame into the
eye may cause injury.

Be careful not to close the hinge section of the 3D

●

Eyewear on your finger.

Doing so may result in injury.

• Provide supervision when children are using this product.

■Use of 3D Eyewear

Parents/guardians should monitor children’s viewing

●

habits to avoid their prolonged use without rest
periods.

In commercial application and public viewing, someone

●

in authority should convey the precautions and monitor
the user of the 3D Eyewear.

Use only the 3D Eyewear recommended for this TV.

●

Only use the 3D Eyewear for its intended 3D content

●

viewing purpose.
Do not move around while wearing the 3D Eyewear.

●

The surrounding area appears dark, which may result in

falling or other accidents that may cause injury.

Inspect the 3D Eyewear for damage before each use.

●

■Viewing of 3D Images

In the event that you experience dizziness, nausea, or

●

other discomfort while viewing 3D images, discontinue
use and rest your eyes.

• When you set the effect by using “3D adjustment”, take
into account that the vision of 3D images varies among
different individuals.

Do not use if the 3D Eyewear is cracked or broken.

●

Content for 3D viewing includes commercially available

●

Blu-ray discs, 3D broadcasts, etc.
When preparing your own 3D content, ensure that it is

●

properly produced.

CEA CHILD SAFETY NOTICES

WARNING

Flat panel displays are not always supported on the proper stands
or installed according to the manufacturer’s recommendations.
Flat panel displays that are inappropriately situated on dressers,
bookcases, shelves, desks, speakers, chests, or carts may fall
over and may cause personal injury or even death.

The consumer electronics industry (of which Panasonic is
a member) is committed to making home entertainment
enjoyable and safe. To prevent personal injury or death, be
sure to follow the following safety guidelines:

TUNE INTO SAFETY:

• One size does NOT fit all. Follow the manufacturer’s
recommendations for the safe installation and use of your
flat panel display.

• Carefully read and understand all enclosed instructions for
proper use of this product.

• Don’t allow children to climb on or play with furniture and
television sets.

• Don’t place flat panel displays on furniture that can easily be
used as steps, such as a chest of drawers.

• Remember that children can become excited while watching
a program, especially on “larger than life” flat panel
displays. Care should be taken to install the display where it
cannot be pushed, pulled over, or knocked down.

• Care should be taken to route all cords and cables
connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.

6

WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT
YOUR FLAT PANEL DISPLAY, ALWAYS:

• Use a mount that has been recommended by the display
manufacturer and/or listed by an independent laboratory
(such as UL, CSA, ETL).

• Follow all instructions supplied by the display and wall
mount manufacturers.

• If you have any doubts about your ability to safely
install your flat panel display, contact your retailer about
professional installation.

• Make sure the wall where you are mounting the display
is appropriate. Some wall mounts are not designed to
be mounted to walls with steel studs or old cinder block
construction. If you are unsure, contact a professional installer.

• A minimum of two people are required for installation. Flat
panel displays can be heavy.

Panasonic recommends that a qualified installer perform
the wall-mount installation. See page 4.

The American Academy of Pediatrics discourages
media viewing for children younger than two years.
For more details, see www.aap.org.

FCC and IC STATEMENT

This equipment has been tested and found to comply with the limits for an Other Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the Panasonic Service Center or an experienced radio/TV technician for help.

FCC Caution:
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables
when connecting to peripheral devices. Any changes or modifications not expressly approved by Panasonic Corp. of
North America could void the user’s authority to operate this device.

FCC and Industry Canada (IC) RF Exposure Warning :

• This TV is provided with one USB port on rear enclosure for exclusive dedicated use for insertion of the following
optional transmitter: Bluetooth Adapter with FCC ID: NKR-DBUBP207 / IC ID: 4441A-DBUBP207.

• This TV is provided with USB port on rear enclosure for insertion of the following provided Wireless LAN Adapter :
Wireless LAN Adapter with FCC ID: H8N-WLU5080 / IC ID : 1353A-WLU5080.

• Other transmitters shall not be used, unless specifically recommended when they become available. Other third­party wireless transmitters have not been RF exposure evaluated for use with this TV and may not comply with FCC
and IC RF exposure requirements.

• The above two described transmitters comply with FCC and IC radiation exposure limits set forth for an
uncontrolled environment for mobile use with minimum 8 inches (20 cm) spacing requirement between transmitters
and all person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation.

<Only for Wi-Fi if capable of transmission in the 5.15 ~ 5.25 GHz frequency band>
This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range.
FCC and IC require this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful
interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65
to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product.

Responsible Party: Panasonic Corporation of North America

Contact Source: Panasonic Consumer Marketing Company of North America

email:

One Panasonic Way, Secaucus, NJ 07094

1-877-95-VIERA (958-4372)

[e-mail]

This device complies with Part 15 of the FCC Rules and all applicable IC RSS standards.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

■About wireless LAN adapter

Wireless LAN adapter and Access point need to be obtained separately.

●

For the latest information on applicable wireless LAN adapters, check the following website:
http://Panasonic.com/NetConnect
Check that the Access point supports WPS*.

●

(If it does not support WPS, “Password” of the Access point is required when configuring settings.)
Follow the instructions on the Access point setup screen and configure the appropriate security settings.

●

For more details on setting of Access point, please refer to operating manual for the Access point.
We recommend using 11n (5 GHz) for the wireless system between the wireless LAN adapter and Access point.

●

Communication is also possible with 11a, 11b, and 11g (2.4 GHz), but the communication speed may be slower.
If the wireless system of the Access point is changed, devices that could connect by wireless LAN may no longer be

●

able to connect.
When Online Movies, DLNA, or other device is using the network, do not disconnect the wireless LAN adapter.

●

Data transmitted and received over radio waves may be intercepted and monitored.

●

Keep the TV away from the following devices as much as possible:

●

Wireless LAN, microwaves, and other devices that use 2.4 GHz and 5 GHz signals. Otherwise, the TV failures such
as malfunction may occur due to the radio wave interference.
When noises occur due to the static electricity, etc., the TV might stop operating for the protection of the devices. In

●

this case, turn the TV Off with power On / Off switch, then turn it On again.

* WPS: Wi-Fi Protected Setup

7

Accessories/Optional Accessories

Accessories

Check you have all the items shown.

Accessories

Remote Control
Transmitter

N2QAYB000778

Owner’s Manual
Quick start guide
Child safety
Product Registration Card
(U.S.A.)

Batteries for the
Remote Control
Transmitter (2)

AA Battery

Pedestal

Power cord

Wireless Adapter

N5HBZ0000055 K2KYYYY00150

How to assemble
(p. 9)

Optional Accessories

3D Eyewear

(Rechargeable type)

TY-ER3D4SU

●

TY-ER3D4MU

●

Communication Camera

TY-CC20W

●

Wall-hanging bracket

TY-WK5P1RW

●

The angle of wall-hanging
bracket can be adjusted in
“zero tilting (vertical)” and
“5, 10 or 15-degree tilting”
for this TV.

Warning

In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licensed

●

contractor to secure the wall-hanging brackets.
Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps to prevent

●

the TV from tipping over.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.

●

Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the

●

wall before hanging bracket.
When using the angled-type wall-hanging bracket, please ensure that there is sufficient space for the connecting

●

cables not to press against the wall when the TV is tilted forward.
For safety reasons, remove units no longer being used from their wall-mounted locations.

●

Please contact your nearest Panasonic dealer to purchase the recommended
Optional accessories. For additional details, please refer to the Optional
accessories installation manual.

• Use Panasonic 3D Eyewear supporting Bluetooth wireless technology.
Product information (Model No. and release date etc.) is subject to change without notice.

•

• For more product information

(USA) http://www.panasonic.com (Canada) http://panasonic.ca
(Global reference) http://panasonic.net/avc/viera

• This camera can be used with VIERA Connect.

•

It is recommended to connect the communication camera directly to the TV’s USB2 ports.

• For details, read the manual for the Communication Camera.

Rear of the TV

a

Holes for wall-hanging
bracket installation

a: 19.7” (500 mm)
b: 11.8” (300 mm)

Screw for attaching the TV to the wall-hanging bracket
(not supplied with the TV)

Depth of screw:

b

(View from the side)

minimum 0.67” (17.0 mm)
maximum 1.46” (37.0 mm)

M8

8

Attaching the pedestal to TV

■

Assembling the pedestal

Insert the protrusion of the Neck

into the Base firmly.

Neck
Protrusion of the

Neck (bottom)

Front

Attach the Bracket to the protrusion of Neck.
Make sure that the bracket is anchored
before fixing the screws.

Fix securely with assembly screws (4 screws)

Protrusion of Neck (top)

Bracket

■

Set-up

Tighten assembly screws (total 4 screws) loosely at first,
then tighten them firmly to fix securely.

x 4 pcs.

B

Turn the stand over and fix stand neck
securely with assembly screws. (4 screws)

• Do not hold the neck when turning over the
stand.

x 4 pcs.

B

Front

Back of Stand

Attach the cover and fix securely with

assembly screw.

Hole for screw

A

x 1 pcs.

Cover

Accessories

Assembly screws

A

XYN4+F10FNK (Black)

size (M4 x 10)

B

XYN5+F16FN (silver)

size (M5 x 16) (12)
Bracket (1)

TBL5ZA3200

Neck (1)

TXFBL5Z0085

Cover (1)

TXFBL5Z0056

Cover is in the same bag

with Owner’s Manual

Base (1)

TBL5ZX0421

(1)

Rear side

Arrow
mark

Base

Work on a flat surface

Warning

Do not disassemble or modify the pedestal.

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any pedestal other than that provided with this TV.

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Hole for pedestal
installation

B

x 4 pcs.

Bracket

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when
using the wall hanging bracket or repacking the TV.

Remove the assembly screws from the TV.
Lift the TV from the pedestal.
Remove the assembly screw from the cover.
Pull out the cover.
Remove the assembly screws from the Bracket.
Remove the assembly screws from the Back of

stand and pull out the neck.

Do not use the pedestal if it becomes warped or physically damaged.

If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.

During set-up, make sure that all screws are securely tightened.

If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong

enough to support the TV, and it might fall over and become damaged, and personal injury may result.

When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (Above)

Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.

9

Power cord connection

To attach To remove

Hook

Open

Insert it firmly until the
tabs on both sides click
into place.

Installing the remote’s batteries

Close

Note the correct polarity
(+ or -).

Keep pushing both
sides until they snap
and pull.

Caution

Incorrect installation may cause

battery leakage and corrosion,
resulting in damage to the remote
control.

Do not mix old and new batteries.

•

Do not mix different battery types (such

•

as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd)

•

batteries.

Do not burn or break batteries.

10

Connections

Connection Panels

Back of the TV

USB
connector

SD card
slot

DIGITAL AUDIO OUT ETHERNET connector

Antenna or Cable connection

* See page 10

(Power cord
connection)

Power Cord
(Connect after all the
other connections have
been made.)

Cable

You need to subscribe to a cable TV service to enjoy viewing their programming.

●

You may need to subscribe to a high-definition (HD) cable service to enjoy HD programming.

●

The connection for high-definition can be done with the use of an HDMI or Component Video cable. (p. 12)

Note

When using a Cable box, external equipment and video cables shown in this manual are not supplied with the TV.

●

When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first.

●

For additional assistance, visit us at: www.panasonic.com/help

●

■

Wireless adapter connection

Back of the TV

VHF/UHF Antenna

Cable TV

VHF/UHF Antenna

• NTSC (National Television System Committee):
ATSC (Advanced Television Systems Committee):
Digital TV Standards include digital high-definition television (HDTV), standard-definition television
(SDTV), data broadcasting, multi-channel surround sound audio and interactive television.

www.panasonic.ca

or

A

B C

Back of the TV

■

Setup Wireless
LAN Adapter

Insert straight in

11

AV cable connection

Best

Good

Basic

(Not HD)

To use HDMI terminals

HDMI-DVI Conversion cable

Connect to Audio
input terminal

To use COMPONENT terminals

To use COMPOSITE terminals

red

blue

green

white

red

yellow

white

green

blue

red

white

red

yellow

white

red

green

blue

red

white

red

yellow

white

red

HDMI
AV OUT

R

Y

B

P

PR

L

R

L

R

DVI OUT

L

AUDIO OUT

COMPONENT
VIDEO OUT

AUDIO
OUT

COMPOSITE
OUT

AV Equipment

e.g. Blu-ray Disc
player

AV Equipment

e.g. Blu-ray Disc
player

AV Equipment

e.g. Blu-ray Disc
player

AV Equipment

e.g. DVD Recorder

or

e.g. VCR

12

red

The Green terminal is shared for both the COMPONENT and COMPOSITE (VIDEO IN) connection.

●

When using COMPOSITE (VIDEO IN) connection, the Yellow connector (Video) should be inserted into Green
connection.

Video

Comp.

select

(For more details, please refer to eHELP (p. 16). )

Audio connection

Audio equipment

DIGITAL

Optical cable

AUDIO IN

e.g. Amplifier

Identifying Controls

TV controls/indicators

Front of the TV Back of the TV

Changes the input mode
Chooses Menu and
Submenu entries
(Press and hold down for
MENU function)

Selects channels
in sequence

C.A.T.S. sensor
Plasma C.A.T.S. (Contrast
Automatic Tracking System)

Power indicator
(on: red, off: no light)

Remote control sensor
within about 23 feet (7 meters) in
front of the TV set

Note

The TV consumes a small amount of electric energy even when turned off.

●

Do not place any objects between the TV remote control sensor and remote control.

●

• An image of the control panel is displayed on the screen while using it.

Remote control

Switches TV On or Off (Standby)

Select source to watch

Displays Main Menu

Displays Options Menu for special functions
(when available)

Colored buttons
(used for various functions)

Volume up/down

Sound mute On/Off

Changes aspect ratio and zoom

Volume up/down

POWER button

Closed Caption On/Off

Selects Secondary Audio Programming

Exits from menu screen

Displays 3D settings (p. 15)

Displays VIERA Connect Home screen

Displays VIERA TOOLS menu

Selects/OK/Change

Go back to previous menu

Channel up/down, when viewing from
ANT/Cable source

Displays or removes the information
banner

Switches to previously viewed channel
or input

External equipment operations

*

Functions are switched depending on
connected external equipment and operation.

:

Press and hold to Skip backward/
forward

Accesses NETFLIX service directly
(via VIERA Connect)

• You need a Broadband environment to use
this service

• This service might be stopped or the
conditions changed without notice.

Operates the Favorite channel list
function

Numeric keypad to select any channel
or press to enter alphanumeric input in
menus

Use for digital channels

Viewing from external media (SD/USB)

13

First Time Setup

The first time setup screen is displayed only when the TV is turned on for the first time, after the power cord
is inserted into a wall outlet and the “Auto power on” is set to “No”.
(Press MENU --> Setup --> Advanced setup --> Auto power on)

Turn the TV on with the POWER button

(Remote)(TV)

or

or

Setup the following items

Select your language

●

Select your country

●

Select your viewing mode (Be sure to select “ Home Use”)

●

If you select “ Store Demonstration” by mistake, confirmation screen will be
displayed.
To display the “Set viewing mode” screen again and select “Home Use”, do one of
the following:

• Press and hold down the side POWER button for at least five seconds.

• Unplug power cord for 30 seconds and plug in again.

ANT/Cable setup

●

Select and set the settings according to your ANT/Cable environment.
Select “Yes” on the confirmation screen, to start the scanning process.
After scanning is finished completely, press OK to continue.

Label the inputs for easy identification

●

To name each input, follow the instructions on screen.
When this is done, select NEXT and press OK to go to the next step.

Configure Network settings

●

Select the Network type and select the setting mode.
If you select “Wireless (WiFi)”, start “Wireless network settings”.
Select “Automatic” or set “Manual” setting, start connection test.
When you complete “Network settings” successfully, the completion screen will be
displayed.

Adjust the Clock

●

Select the clock mode and set other settings.
When “Auto” is selected, clock will be set automatically according to Time zone and
DST.

14

Complete First time setup

Completion screen is displayed.

You can repeat the First time setup

• Press MENU --> Setup --> First time setup

To watch TV via a Cable box, Satellite receiver, or any other source (DVD, DVR,
gaming device, etc.), press the INPUT button and select the appropriate input.

Viewing 3D images on TV

Precautions for Viewing 3D Images

Cautions During Viewing

Do not use devices that emit strong electromagnetic waves (such as cellular phones or personal transceivers) near the

3D Eyewear. Doing so may cause the 3D Eyewear to malfunction.

If the 3D Eyewear is used in a room in which fluorescent lights (50 Hz) are used, the light within the room may appear

to flicker. In this case, either darken or switch off the fluorescent lights when using the 3D Eyewear.
Wear the 3D Eyewear correctly. 3D images will not appear correctly if the 3D Eyewear is worn upside down or back-to-front.

For comfortable viewing

View from at least the recommended distance (3 times the effective height of the screen),

Recommended Distance: 7.55’ (2.3 m) or more.

When the top and bottom area of the screen are blackened, such as when playing movies, view the screen at a distance
3 times further than the height of the actual image. (That makes the viewing distance closer than above recommended
distance.)

Stop using the 3D Eyewear immediately if your skin feels unusual.

In rare cases, the paint or materials used in the 3D Eyewear may cause an allergic reaction.

Stop using the 3D Eyewear immediately if you experience any redness, pain, or itching on the nose or temples.

Prolonged use may cause such symptoms due to excess pressure, which may result in the user feeling unwell.

Use the 3D Eyewear where there is no interference from other devices with Bluetooth® signals.

Viewing 3D images

The following 3D content can be enjoyed on this TV:

• A 3D Blu-ray disc, played on 3D capable Blu-ray player/recorder that is connected via HDMI cable.

• 3D TV broadcast (program)

• 3D Photo and 3D Movie taken by LUMIX/Camcorder.

• 3D game played on 3D capable video game console, connected via HDMI cable.
Optional Accessories (p. 8)
* For more detail on usage of 3D Eyewear (POWER button, Accessories and how to register, etc.), please refer to
operating manuals for the purchased 3D Eyewear. 3D experience differs depending on the type of 3D Eyewear.

Using the 3D Eyewear

Turn on the 3D Eyewear.
Make sure that registration is finished completely.
Put on the 3D Eyewear.

Viewing 3D images

When the HDMI receives information in which 3D mode is detected, 3D images are automatically displayed
according to the signal.
If the 3D images are not displayed correctly, or if the images cause discomfort, the images can be adjusted by
“3D format select” or “3D settings”.

Change the view 3D⇔2D, 3D settings.

●

After Use

Turn off the 3D Eyewear.
After using the 3D Eyewear, store it in the case.

Change the view 3D⇔2D

■Simply switches 3D

3D format select

3D

2D

⇔

2D images (Auto mode)

(example)

select

OK

Switches to Manual mode

●

15

Using eHELP (Built-in Manual)

eHELP (built-in manual) helps you understand how to easily operate the TV features.

Display eHELP

[Top page]

select

next

When you enter eHELP again after exit, the confirmation screen is displayed while the TV is turned on.
You can select “TOP PAGE” or “LAST PAGE”.

select

next

Select the desired page from the menu

Categories Menus Sub menus Desired page

select

select

select

Change the menus using ▲/ ▼

16

next

To return to the previous menu/layer

To exit eHELP

Operate eHELP

next

Display the Menu related to the explanation page after exiting eHELP.

Menu

Picture

Audio

Network

Timer

Lock

Setup

Setup

3D settings

Channel surf mode

Language

Clock

ANT/Cable setup

Input labels

Anti image retention

Closed Caption

1/2

All

“Go to Menu” is available depending on the situation or condition.

Frequently Asked Questions (FAQ)

Questions Answers

Check that the batteries are fresh, are of the same type and are

Why doesn’t the Remote
Control work?

Why is there no picture or just
a blue, black or snowy screen
being displayed?

Why is the screen blank and the
power indicator blinking?

installed with the correct polarity (+ & -).
To operate other devices, such as changing channels when using
Cable, or Satellite boxes, or operating non-Panasonic Blu-ray
players, use the remote supplied with the device.

Check if the power cord is plugged in and the TV is turned on (front
red LED light should be on, not blinking).
Press the INPUT button on the remote to select the correct input source.
Ensure all connections are correct and secure.
When using external video source, such as a Cable/Satellite box or DVD
player, check that the device is on and functioning correctly.

Press MENU on the TV’s remote control. If the menu is displayed,

then the TV is working; recheck above steps.

The TV has gone into shutdown mode to protect itself. Try unplugging it for a
few minutes and connecting it again. If there was a temporary power surge
on the AC line it may now be OK. If the blinking returns, call 1-877-95-VIERA
(U.S.A.) or 1-866-330-0014 (Canada).

How do I display eHELP (built-in Manual) ?

Press VIERA TOOLS on the TV’s remote control and select

eHELP icon to display eHELP. (p. 16)

Care and Cleaning

First, unplug the Power cord plug from the wall outlet.

Display panel

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.

If the surface is particularly dirty, after cleaning up the dust, soak a soft, lint-free cloth in diluted, mild liquid dish soap (1 part

mild liquid dish soap diluted by 100 times the amount of water), and then wring the cloth to remove excess liquid. Use this cloth
to wipe the surface of the display panel, then wipe it evenly with a dry cloth of the same type until the surface is dry.

Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile

substances such as insect sprays, solvents, and thinner; otherwise, the quality of the surface may be adversely affected.

Cabinet

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

If the cabinet is particularly dirty, soak the cloth in diluted, mild liquid dish soap and then wring the cloth dry. Use this cloth to

wipe the cabinet and then wipe it dry with a dry cloth.

Do not allow any mild liquid dish soap to come into direct contact with the surface of the Plasma TV.

If water droplets get inside the unit, operating problems may result.

Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the cabinet

surface may be adversely affected or the coating may peel off.

Do not let articles made from rubber or PVC be in contact with the TV for long periods of time.

Pedestal

Cleaning

Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small
amount of mild liquid dish soap has been added and then wipe with a dry cloth.
Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating.
(If using a chemically-treated cloth, follow the instructions supplied with the cloth.)

Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term contact with

rubber, vinyl products, or the like. (Doing so will cause deterioration.)

Power cord plug

Wipe the plug with a dry cloth at regular intervals. (Moisture and dust can lead to fire or electrical shock.)

Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we disclaim
any liability or damage arising from operation and/or performance from usage of such other maker’s peripheral devices.

17

Specifications

TC-60PUT54

Power Source AC 120 V, 60 Hz

Power Consumption
(Rated power / Standby power)

Display Panel

Panel System Plasma Display panel

Screen size 60 ” class (60.1 inches measured diagonally)

W × H × Diagonal

Number of pixels 1,920 × 1,080

Speaker Output 20 W [10 W + 10 W] (10 % THD)

Channel Capability
(Digital/Analog)

Operating Conditions Temperature: 32 °F - 104 °F (0 °C - 40 °C) Humidity: 20 % - 80 % RH (non-condensing)

VIDEO IN RCA PIN (VIDEO, AUDIO-L, AUDIO-R)

Connection

Terminals

COMPONENT IN RCA PIN (Y, PB, PR, AUDIO-L, AUDIO-R)

HDMI IN 1/2 TYPE A Connector (supports “HDAVI Control 5” function)

USB 1/2 USB2.0 Type A connector

DIGITAL AUDIO OUT PCM / Dolby Digital, Fiber Optic

OTHERS SD CARD slot, ETHERNET (10BASE-T/100BASE-TX)

Dimensions

Including pedestal
(W × H × D)

TV Set only
(W × H × D)

Mass

Including pedestal 83.8 lb. (38.0 ) NET

TV Set only 73.9 lb. (33.5

427 W / 0.2 W

52.3 ” × 29.4 ” × 60.1 ”
(1,330 mm × 748 mm × 1,526 mm)

VHF/ UHF: 2 - 69, CATV: 1 - 135

55.2 ” × 34.8 ” × 15.3 ”
(1,401 mm × 883 mm × 387 mm)

55.2” × 32.9 ” × 3.3 ”
(1,401 mm × 835 mm × 84 mm )

) NET

18

Bluetooth

Standard Compliance

Frequency Range

Use Panasonic 3D Eyewear supporting Bluetooth wireless technology.

Note

Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.

Bluetooth® 3.0

2.402GHz~2.480GHz

Limited Warranty (for U.S.A. and Puerto Rico only)

Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way
Secaucus, New Jersey 07094

Panasonic Plasma Television

Limited Warranty

Limited Warranty Coverage

If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Marketing
Company of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below,
which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with
new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase
price. The decision to repair, replace or refund will be made by the warrantor.

PLASMA TV CATEGORIES PARTS LABOR SERVICE

Up to 42” (diagonal)

46” (diagonal) and larger On-Site

During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts” Limited Warranty period,
there will be no charge for parts.
You must carry-in your product or arrange for on-site service during the Limited Warranty period. If non-rechargeable
batteries are included, they are not warranted. This Limited Warranty only applies to products purchased and serviced
in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser of a new product
which was not sold “as is”. A purchase receipt or other proof of the original purchase date is required for Limited Warranty
service.

On-Site or Carry-in Service

For On-Site or Carry-In Service in the United States and Puerto Rico call 1-877-95-VIERA (1-877-958-4372).

On-site service where applicable requires clear, complete and easy access to the product by the authorized servicer and
does not include removal or re-installation of an installed product. It is possible that certain on-site repairs will not be
completed on-site, but will require that the product or parts of the product, at the servicer’s discretion be removed for shop
diagnosis and/or repair and then returned.

Limited Warranty Limits And Exclusions

This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER
normal wear and tear or cosmetic damage, nor does it cover markings or retained images on the glass panel resulting
from viewing fixed images (including, among other things, non-expanded standard 4:3 pictures on wide screen TV’s,
or onscreen data in a stationary and fixed location). The Limited Warranty ALSO DOES NOT COVER damages which
occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result
from accidents, misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty installation,
set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage,
modification, or commercial use (such as in a hotel, office, restaurant, or other business), rental use of the product,
service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts
of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE
WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE
OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this excludes

damages for lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to and from the
servicer. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES,

INCLUDING THE LIMITED WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED
WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an
implied Limited Warranty lasts, so the exclusions may not apply to you.

This Limited Warranty gives you specific legal rights and you may also have others rights which vary from state to state. If
a problem with this product develops during or after the Limited Warranty period, you may contact your dealer or Service
Center. If the problem is not handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department at the
addresses listed for the warrantor.

PARTS AND SERVICE (INCLUDING COST OF AN ON-SITE SERVICE CALL, WHERE APPLICABLE) WHICH ARE
NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.

1 (ONE) YEAR 1 (ONE) YEAR

Carry-In

19

Customer Services Directory (for U.S.A. and Puerto Rico)

Customer Services Directory (United States and Puerto Rico)

Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center;
purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web
Site at:

http://www.panasonic.com/help

or, contact us via the web at:

http://www.panasonic.com/contactinfo

You may also contact us directly at:
1-877-95-VIERA (958-4372)
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.

■For hearing or speech impaired TTY users, TTY: 1-877-833-8855

Accessory Purchases (United States and Puerto Rico)

Purchase Parts, Accessories and Instruction Books on line for all Panasonic Products by visiting our Web
Site at:

http://www.pstc.panasonic.com

or, send your request by E-mail to:

[e-mail]

You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday - Friday 9 am to 9 pm, EST.)

Panasonic National Parts Center

20421 84th Avenue South,
Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)

20

■For hearing or speech impaired TTY users, TTY: 1-866-605-1277

Limited Warranty (for Canada)

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

PANASONIC PRODUCT – LIMITED WARRANTY

Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and
for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with
new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase
price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.

Viera TV (46” & over) In-home service One (1) year, parts (including panel) and labour.

Viera TV (under 46”) Carry-in service One (1) year, parts (including panel) and labour.

In-home Service will be carried out only to locations accessible by roads and within 50 km of an authorized Panasonic
service facility.

In-home service requires clear, complete and easy access to the product by the Authorized Servicer and does not include
removal or re-installation of an installed product. If removal is required to service the product, it will be at the discretion of
the Servicer and in no event will Panasonic Canada Inc. or the Servicer be liable for any special, indirect or consequential
damages.

This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic
brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada,
which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.

IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR
OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS
REQUIRED

LIMITATIONS AND EXCLUSIONS

This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal
wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or
failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment
of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand,
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or
service by anyone other than a Authorized Servicer, or damage that is attributable to acts of God. Dry cell batteries are
also excluded from coverage under this warranty.

THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the
Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is
not exhaustive, but for illustration only.)

In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or
the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives
you specific legal rights and you may have other rights which vary depending on your province or territory.

WARRANTY SERVICE

For product operation and information assistance, please contact:

Our Customer Care Centre: 1-800 #: 1-866-330-0014
or visit our website: https://concierge.panasonic.ca

For product repairs, please contact Viera Customer Care Agent using the above contact info.

IF YOU SHIP THE PRODUCT TO A SERVICENTRE

Carefully pack and send prepaid, adequately insured and preferably in the original carton.

Include details of the defect claimed, and proof of date of original purchase.

21