Panasonic TC-58PS14, TC-65PS14 User Manual

(Image: TC-58PS14)

For assistance (U.S.A./Puerto Rico), please call: 1-877-95-VIERA (958-4372) or visit us at www.panasonic.com/contactinfo

For assistance (Canada), please call:

1-866-330-0014

or visit us at www.vieraconcierge.ca

Para solicitar ayuda (EE.UU./Puerto Rico), llame al:

1-877-95-VIERA (958-4372)

ó visítenos en www.panasonic.com/contactinfo

Operating Instructions

58”/65” Class 1080p Plasma HDTV

(58.0/64.7 inches measured diagonally)

Manual de instrucciones

Televisión de alta definición de 1080p y

clase 58”/65” de Plasma

(58,0/64,7 pulgadas medidas diagonalmente)

Model No.

Número de modelo

TC-58PS14 TC-65PS14

Contents

Please read before using the unit

Safety Precautions··································································2 Notes ······················································································5 Accessories/Optional Accessory·············································5 Basic Connection ····································································7 Identifying Controls ·······························································11 First Time Setup····································································12 How to Use Menu Functions·················································15 FAQ·······················································································18 Limited Warranty

(for U.S.A. and Puerto Rico only) ·········································20

Customer Services Directory

(for U.S.A. and Puerto Rico) ·················································21

Limited Warranty (for Canada) ·············································22

For more detailed instructions, refer to the Operating Instructions on the CD-ROM. To view the Operating Instructions on the CD-ROM, you need a computer equipped with a CD-ROM drive, and Adobe® Reader® (Version 7.0 or later is recommended) installed on your computer.

Depending on the operating system or settings on your computer, the Operating Instructions may not start automatically. In this case, open the PDF file under \MANUAL\PDF manually to view the instructions.

English

Español

Please read these instructions before operating your set and retain them for future reference. The images shown in this manual are for illustrative purposes only.

Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en el futuro. Las imágenes mostradas en este manual tienen solamente fines ilustrativos.

Para obtener instrucciones más detalladas, consulte las instrucciones de manejo contenidas en el CD-ROM. Para ver las instrucciones de manejo contenidas en el CD-ROM, se necesita un ordenador equipado con una unidad de CD-ROM, y que tenga instalado Adobe® Reader® (se recomienda la versión 7.0 o posterior).

Dependiendo del sistema operativo o de las configuraciones del ordenador, las instrucciones de manejo pueden no iniciarse automáticamente. En tal caso, abra manualmente el archivo PDF en \MANUAL\ PDF para visualizar las instrucciones.

TQB2AA0563

Safety Precautions

The lightning flash with

CAUTION

RISK OF ELECTRIC SHOCK

WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set (including on shelves above, etc.).

DO NOT OPEN

Important Safety Instructions

11) Only use attachments / accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.

arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.

The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for an Other Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the Panasonic Service Center or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to peripheral devices. Any changes or modifications not expressly approved by Panasonic Corp. of North America could void the user’s authority to operate this device.

Responsible Party: Panasonic Corporation of North America

Contact Source: Panasonic Consumer Electronics Company

email: consumerproducts@panasonic.com

CANADIAN NOTICE:

For Model TC-58PS14, TC-65PS14 This Class B digital apparatus complies with Canadian ICES-003.

One Panasonic Way, Secaucus, NJ 07094

1-877-95-VIERA (958-4372)

WARNING/CAUTION

WARNING

Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being played with by young children, creating the potential risk of suffocation.

Set up

This Plasma TV may fall and can cause personal injury or

even death if not installed correctly. To prevent personal injury or death, follow these warnings:

Install the Plasma TV in accordance with the

manufacturer’s recommended pedestal or stand, corresponding hardware and installation instructions.

This Plasma TV is for use only with the following optional

accessories. Use with any other type of optional accessories may cause instability. The following accessories are manufactured by Panasonic Corporation.

•

Wall-hanging bracket (Angled) TY-WK5P1RW (TC-58PS14)

Be sure to ask a qualified technician to carry out the

installation and set-up.

Two or more people are required to install or remove the

television.

Some wall mounts (wall-hanging brackets) are not

designed to be mounted to walls with steel studs or old cinder block constructions.

Ask your dealer or licensed contractor to properly secure the

wall-hanging bracket.

Do not place the Plasma TV or its stand on a sloped or

unstable surface.

The Plasma TV may fall or tip over.

Do not support the Plasma TV on a non-specified

pedestal.

Do not place the Plasma TV on furniture that can easily

be used as steps, such as a chest of drawers. Do not climb or allow children to climb on the Plasma TV Place or install the Plasma TV where it cannot be pushed,

pulled over or knocked down. Route all cords and cables such that they cannot be

tripped over or pulled by curious children. Do not place any objects on top of the Plasma TV.

If water spills onto the Plasma TV or foreign objects get

inside it, a short-circuit may occur which could result in fire

or electric shock. If any foreign objects get inside the Plasma

TV, please consult an Authorized Service Center.

AC Power Supply Cord

To prevent fire or electric shock:

The Plasma TV is designed to operate on a 120 V AC,

60 Hz service. Insert the power cord plug as far as it will

go into the wall socket.

If the plug is not fully inserted, heat may generate, which

could cause a fire.

The included power cord is for use with this unit only. Do not use any power cord other than that provided with

this TV. Do not handle the power cord plug with wet hands. Do not do anything that might damage the power supply

cord.

TY-WK6P1RW (TC-65PS14)

When disconnecting the power supply cord, hold the

plug, not the cord.

Do not use the power supply cord if the plug or cord is

damaged.

Replace the cord or contact your Authorized Service Center

Handling the power supply cord

Insert the power plug fully into the socket outlet. (If the

power plug is loose, it could generate heat and cause fire.) Ensure that the power plug is easily accessible. Ensure the earth pin on the power plug is securely

connected to prevent electrical shock.

•

An apparatus with CLASS I construction shall be connected to a power socket outlet with a protective earthing connection.

Do not touch the power plug with a wet hand. (This may

cause electrical shock.) Do not use any power cord other than that provided with

this TV. (This may cause fire or electrical shock.) Do not damage the power cord. (A damaged cord may

cause fire or electrical shock.)

•

Do not move the TV with the cord plugged in the socket outlet.

• Do not place a heavy object on the cord or place the cord near a high-temperature object.

• Do not twist the cord, bend it excessively, or stretch it.

• Do not pull on the cord. Hold onto the power plug body when disconnecting cord.

• Do not use a damaged power plug or socket outlet.

If Problems Occur During Use

If a problem occurs (such as no picture or no sound),

or if smoke or an abnormal odor is detected from the Plasma TV, unplug the power supply cord immediately.

Continued use of the TV under these conditions might cause

a fire or permanent damage to the TV. Have the TV evaluated by an Authorized Service Center. Servicing of the TV by unauthorized personnel is strongly discouraged due to its high voltage.

If water or an object gets inside the Plasma TV, if the

Plasma TV is dropped, or if the enclosure becomes damaged, unplug the power supply cord immediately.

A short-circuit may occur, which could cause a fire. Contact

an Authorized Service Center for an evaluation.

CAUTION

Do not cover the ventilation holes.

Doing so may cause the Plasma TV to overheat, which can

cause a fire or damage to the Plasma TV.

Leave a space of 3 15/16” (10 cm) or more at the top, left

and right, and 2 3/4” (7 cm) or more at the rear.

When using the pedestal, keep the space between the

bottom of the TV and the pedestal or stand surface clear from objects that may obstruct ventilation.

When Moving the Plasma TV

Be sure to disconnect all cables before moving the

Plasma TV.

Moving the TV with its cables attached might damage the

cables which, in turn, can cause fire or electric shock

To prevent an electric shock, disconnect the power

plug from the wall outlet as a safety precaution before carrying out any cleaning.

Safety Precautions (Continued)

Transport only in upright position

Transporting the unit with its display panel facing upright or

downward may cause damage to the internal circuitry.

Using a dry cloth, clean any dust from the power supply

cord and plug regularly.

Build-up of dust on the power cord plug can increase

humidity, which might damage the insulation and cause a fire.

This Plasma TV radiates infrared rays;

therefore, it may affect other infrared communication

equipment. Install your infrared sensor in a place away from direct or reflected light from your Plasma TV.

The TV will still consume some power as long as the power supply cord is connected to the wall outlet.

Display panel is made of glass. Do not apply strong force

or impact to the display panel.

This may cause damage resulting in injury.

The TV is heavy. TV should be handled by 2 or more

people. Support as shown to avoid injury by the TV tipping or falling.

CEA CHILD SAFETY NOTICES: Flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations. Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause personal injury or even death.

The consumer electronics industry (of which Panasonic is a member) is committed to making home entertainment enjoyable and safe. To prevent personal injury or death, be sure to follow the following safety guidelines:

TUNE INTO SAFETY:

• One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of your flat panel display.

• Carefully read and understand all enclosed instructions for proper use of this product.

• Don’t allow children to climb on or play with furniture and television sets.

• Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.

• Remember that children can become excited while watching a program, especially on “larger than life”

flat panel displays. Care should be taken to install the display where it cannot be pushed, pulled over, or knocked down.

• Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children.

WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:

• Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL).

• Follow all instructions supplied by the display and wall mount manufacturers.

• If you have any doubts about your ability to safely install your flat panel display, contact your retailer

about professional installation.

• Make sure the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer.

• A minimum of two people are required for installation. Flat panel displays can be heavy.

Panasonic recommends that a qualified installer perform the wall-mount installation. See page 5.

Notes

Do not display a still picture for a long time

This causes the image to remain on the plasma screen (“Image retention”). This is not considered a malfunction and is not covered by the warranty.

4 : 3

To prevent “Image retention”, the screen saver is automatically activated after a few minutes if no signals are sent or no operations are performed.

Typical still images

Channel number and other logos

•

Image displayed in 4:3 mode

•

SD Card photo • Video game • Computer image

•

Set up

■

Do not place the unit where it’s exposed to sunlight or

other bright light (including reflections).

Use of some types of fluorescent lighting may reduce the

remote control’s transmission range.

Accessories/Optional Accessory

Accessories

Check you have all the items shown. (Accessories)

Remote Control Transmitter

N2QAYB000321

Pedestal

TBLX0102

(TC-58PS14)

Batteries for the Remote Control Transmitter (2)

AA Battery

TBLX0126

(TC-65PS14)

Optional Accessory

Wall-hanging bracket

(angle)

TY-WK5P1RW (for 58”) TY-WK6P1RW (for 65”)

Cleaning cloth

Note

In order to maintain the TV’s performance and safety,

be absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging brackets.

Carefully read the instructions accompanying the

plasma TV stand or pedestal, and be absolutely sure to take steps to prevent the TV from tipping over.

Handle the TV carefully during installation since

subjecting it to impact or other forces may cause its panel to crack.

HDMI cable

K1HA19DA0005

6.6 ft (2.0 m)

Operating Instructions (Book) Operating Instructions (CD-ROM) Viera Concierge and basic instruction for HDTV Product Registration Card (U.S.A.) Customer Care Plan Card (U.S.A.)

AC cord

Hook

Open

Installing the remote’s batteries

•

Note the correct polarity (+ or -).

•

Caution

Incorrect installation may cause

battery leakage and corrosion, resulting in damage to the remote control.

Do not mix old and new batteries. Do not mix different battery types (such as alkaline and manganese batteries). Do not use rechargeable (Ni-Cd) batteries.

Do not burn or break batteries.

Attaching the pedestal to TV

Accessories

Assembly screws

(for 58”) M5 × 25 (Silver) (4)

(for 65”) M5 × 30 (Silver) (6)

(for 58”) M5 × 30 (Black) (4) (for 65”) M6 × 25 (Black) (4)

Poles (2)

(for 58”)

L or R is

printed at the bottom of the poles.

(for 65”)

Front

Back

Base (1)

(for 58”)

(for 65”)

Allen wrench (included tool only for 65”)

Assembling the pedestal

■

[TC-58PS14 (TBLX0102)] [TC-65PS14 (TBLX0126)]

Fix securely with assembly screws

. (Total 4 screws)

Tighten screws firmly.

Pole

Fix securely with assembly screws A. (Total 6 screws)

Tighten screws firmly using

Allen wrench

Pole

Set-up

■

Carry out work on a horizontal and level surface. Tighten screws firmly.

Pole

Base

Warning

Caution Do not use any other TV and displays.

Arrow mark

(Image: TC-58PS14)

Do not disassemble or modify the pedestal.

Otherwise the TV may fall over and become damaged, and

Do not use the pedestal if it becomes warped or physically damaged.

During set-up, make sure that all screws are securely tightened.

If sufficient care is not taken to ensure screws are properly

Front

Base

Front

Base

Bottom view

Rear side

Hole for pedestal installation

Pole

Fix securely with assembly screws B.

(Total 4 screws)

personal injury may result.

personal injury may result. If you use the pedestal when it is physically damaged, personal injury

may result. Contact your nearest Panasonic Dealer immediately.

tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

AC cord connection

To attach To remove

Keep pushing both

Insert it firmly until the tabs on both sides click into place.

side snaps and pull down

To connect the antenna terminal and Cable Box

VIDEO

AUDIO

VIDEO

AUDIO

Basic Connection

Example 1

Cable TV

Connecting Antenna (To watch TV)

VHF/UHF Antenna

Cable TV

VHF/UHF Antenna

NTSC (National Television System Committee):

•

Conventional broadcasting ATSC (Advanced Television Systems Committee):

•

Digital TV Standards include digital high-definition television

(HDTV), standard-definition television (SDTV), data broadcasting, multi-channel surround-sound audio and interactive television.

Back of the TV

* See page 6

(AC cord connection)

AC 120 V

60 Hz

AC Cord (Connect after all the other connections have been made.)

(If no Cable Box) or

ANT OUTANT IN

Cable Box

Note

Not all cables and external equipment shown in this book are supplied with the TV. For more details on the external equipment’s connections, please refer to the operating manuals for the equipment. When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first. For additional assistance, visit us at: www.panasonic.com

Cable Box/Cable

You need to subscribe to a cable TV service to enjoy viewing their

•

programming. If using a Cable Box, set the TV channel to CH3 or CH4 for regular cable.

•

You can enjoy high-definition programming by subscribing to a high-

•

definition cable Service. The connection for high-definition can be done with the use of HDMI or Component Video cable. To view high-definition programming select the correct video input.

•

www.panasonic.ca

To connect the antenna terminal and DVD recorder or VCR

COMPONENT

VIDEO IN 1

VIDEO

S VIDEO

AUDIO

LRL

HDMI 1 HDMI 2

VIDEO

AUDIO

Basic Connection (Continued)

Example 2

Connecting DVD recorder (VCR) (To record/playback)

AV Equipment (e.g. DVD Recorder or VCR)

VHF/UHF Antenna

DVD Recorder

If the source has a higher resolution signal (480p/720p/1080i/1080p), connection can be made with the use of a Component Video or HDMI cable.

VCR

Connection can be made with the use of an RF cable and Composite Video/S Video cable.

VHF/UHF Antenna

AC Cord

Back of the TV

* See page 6

(AC cord connection)

AC 120 V

60 Hz

ANT OUTANT IN

AV Equipment

(e.g. DVD Recorder or VCR)

(with TV tuner)

Connecting TV and AV equipment

Please refer to

- D on p. 10

+ 16 hidden pages