Panasonic tc-55cx420 Operation Manual

HOME
Pedestals assembly
ANTENNA/CBL PC
USB
HDMI2(ARC)
HDMI 3
COMPONENTAVANT/CBL
SOUND
PICTURE
CONTROL
STREAMING SETUP
MEDIA
SUPPORT
PARENTAL
SYSTEM
NETWORK
eHELP
PHOTOS
MUSIC
VIDEO
ANTENNA/CBL PC
USB
HDMI2(ARC)
HDMI 3
COMPONENT
AV
ANT/CBL
SOUND
PICTURE
CONTROL
PHOTOS
MUSIC
INPUT SOURCE SETUP
MEDIA
SUPPORT
PARENTAL
SYSTEM
NETWORK
eHELP
VIDEO
1
Connect TV to HD box
2
HDMI
Use an HDMI cable for best HD picture.
HDMI1/2/3
A
C
B
C
Be sure to attach the pedestals in the following way .
1. Lay the TV face down on a flat, cushioned surface to avoid damaging or scratching.
2. Attach the pedestals to the TV with four assembly screws
B C A
provided.
First time setup
3
Turn the TV on, then follow the on-screen steps.
Time Zone
Use the Up and Down arrows on your remote control or TV keypad to select your local time zone.
:Select OK:Next
Hawaii
Alaska
Pacific
Mountain
Central
Eastern
Atlantic
Newfoundland
1
HOME
A
Best
HDMI
HD box
(Cable, Satellite,
HDMI port #1 is recommended.
B
A
Component
Note: 1st red is for audio; 2nd red is for video.
OR
Fiber optic, etc)
Good
Video
Basic
(Not HD)
Watch TV via HD box
4
L VIDEO/Y R Pb Pr
AV IN
OR
Note: Connect yellow wire to green.
R Pb Pr
L VIDEO/Y
AV IN
INPUT SOURCE
NETFLIX YOUTUBE VUDU TOONGOGGLES PANDORA ACCUWEATHER
HDMI 1
Other device
Other device
1
CH
3
HOME
2
Network connection
Establish a connection
Select network connection type
Wired LAN (Ethernet)
For minimal network interference, wire the TV to your router using an Ethernet cable.
Built-in Wireless LAN
To connect the TV to your wireless router, you will need :
- Your wireless network name
- Your wireless network password (if required)
Network
Wireless connection with a password
2
• Select your wireless network
name (SSID)
The network name and password may be printed on the Router’s label. Encryption key (password) is CASE sensitive.
HD box
TV
Streaming services Additional Support
Built-in Manual
HOME
STREAMING
NETFLIX YOUTUBE VUDU TOONGOGGLES PANDORA ACCUWEATHER
HDMI 1
Visit Panasonic.com/Support
Why is the screen displaying a blue, black or snowy picture or no picture at all?
Why does my picture quality not look like it is in High Definition?
Why did the network connection fail?
How can I hear the TV's sound through my Home Theater?
- Ensure power cord is plugged in and TV is on (front LED should be red).
- Press INPUT SOURCE button on TV remote to select correct
input source.
- Check that all connections are correct and secure.
- When using external video source, such as Cable/Satellite box or DVD player, check that device is working.
- Press INFO button on remote to confirm type of signal being received. HD signal should be 720p, 1080i or 1080p.
- Select a High Definition channel from HD source (Cable, Satellite, Fiber optic or antenna).
- HD channels sometimes broadcast non-HD content.
- Ensure that HD source (HD box, Blu-ray player, etc.) is connected to TV via either HDMI or Component cable and set to output HD video signal.
- If connection fails, contact your Internet service provider or router/modem manufacturer to check for firewall, content filter or proxy settings that may block TV from accessing the Internet.
- If your Home Theater has an HDMI-ARC Out, then connect it to the TV's HDMI 2 (ARC) input using an HDMI cable.
- If HDMI-ARC is not available, then connect the TV’s DIGITAL AUDIO OUT to the Home Theater using an optical cable or connect to the
headphone jack.
Register your new TV at
Panasonic.com/Register
Get exclusive access to Panasonic owner privileges
Check out Panasonic accessories and other great products at:
Shop.Panasonic.com
Printed in China
Loading...