Panasonic TC-54PS14, TC-42PS14 User Manual

Operating Instructions

42”/50”/54” Class 1080p Plasma HDTV

(41.6/49.9/54.1 inches measured diagonally)

Manual de instrucciones

Televisión de alta definición de 1080p y clase 42”/50”/54” de Plasma

(41,6/49,9/54,1 pulgadas medidas diagonalmente)

Model No.

Número de modelo

TC-42PS14
TC-50PS14
TC-54PS14

Quick Start Guide

(See page 8-18)

Guía de inicio rápido

(vea la página 8-18)

For assistance (U.S.A./Puerto Rico), please call:
1-877-95-VIERA (958-4372)
or visit us at www.panasonic.com/contactinfo

For assistance (Canada), please call:

1-866-330-0014

or visit us at www.vieraconcierge.ca

Para solicitar ayuda (EE.UU./Puerto Rico), llame al:

1-877-95-VIERA (958-4372)

ó visítenos en www.panasonic.com/contactinfo

(Image: TC-42PS14)

English

Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.

Español

Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en el futuro.
Las imágenes mostradas en este manual tienen solamente fines ilustrativos.

TM

Turn your own living room into a movie theater!

Experience an amazing level of multimedia excitement

(Image: TC-42PS14)

HDMI, the HDMI logo and High-

Definition Multimedia Interface are

trademarks or registered trademarks of

HDMI Licensing LLC.

HDAVI Control™ is a trademark of

Panasonic Corporation.

VIERA Link™ is a trademark of

Panasonic Corporation.

Manufactured under license from Dolby

Dolby and the double-D symbol are

trademarks of Dolby Laboratories.

Laboratories.

SDHC Logo is a trademark.

2

Enjoy rich multimedia

Contents

Please read before using the unit

Safety Precautions ·······································4
Notes ···························································· 7

Amplifier
Home theater
system

VCR

Blu-ray Disc recorder

Set Top Box

DVD recorder/

SD memory card

Camcorder

Personal

computer

DVD player/

Blu-ray Disc player

Quick Start Guide

Accessories/Optional Accessory ····· 8
Basic Connection ····························11
Identifying Controls ························ 15
First Time Setup····························· 16

Enjoy your TV!

Basic Features

Watching TV ··············································· 19
Using VIERA TOOLS ·································21
Viewing from an SD Card ··························22
Watching Videos and DVDs ·······················24
Displaying PC Screen on TV ·····················26

Advanced Features

How to Use Menu Functions

(picture, sound quality, etc.) ······················· 28
VIERA LinkTM “HDAVI ControlTM” ················ 32
Lock ··························································· 38
Editing and Setting Channels····················· 40
Closed Caption ·········································· 42
Input Labels ··············································· 43
Using Timer ················································ 44
Recommended AV Connections ················45

Quick Start

Guide

Viewing Advanced FAQs, etc.

This product qualifies for ENERGY STAR
in the “Home Use” setting and this is the
setting in which energy savings will be
achieved. Any modifications to the “Home
Use” setting or other factory default settings
could result in greater energy consumption
beyond levels that meet ENERGY STAR
qualifications.

FAQs, etc.

Ratings List for Lock ··································46
Technical Information ·································47
Care and Cleaning ····································· 51
FAQ ···························································· 52
Specifications ············································· 54
Limited Warranty

(for U.S.A. and Puerto Rico only)··············· 55
Customer Services Directory

(for U.S.A. and Puerto Rico) ······················ 56
Limited Warranty (for Canada) ···················57

3

Safety Precautions

The lightning flash with

CAUTION

RISK OF ELECTRIC SHOCK

WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set
(including on shelves above, etc.).

DO NOT OPEN

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.

11) Only use attachments / accessories specified by the
manufacturer.

12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the cart /
apparatus combination to avoid injury
from tip-over.

13) Unplug this apparatus during lightning storms or when
unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.

15) To prevent electric shock, ensure the grounding pin on the
AC cord power plug is securely connected.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution:
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables
when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by Panasonic
Corp. of North America could void the user’s authority to operate this device.

FCC Declaration of Conformity

Model No. TC-42PS14, TC-50PS14, TC-54PS14

Responsible Party: Panasonic Corporation of North America

Contact Source: Panasonic Consumer Electronics Company

email: [e-mail]

CANADIAN NOTICE:

For Model TC-42PS14, TC-50PS14, TC-54PS14
This Class B digital apparatus complies with Canadian ICES-003.

One Panasonic Way, Secaucus, NJ 07094

1-877-95-VIERA (958-4372)

4

arrowhead within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to persons.

The exclamation point within
a triangle is intended to
tell the user that important
operating and servicing
instructions are in the
papers with the appliance.

WARNING/CAUTION

WARNING

Small parts can present choking hazard if accidentally
swallowed.
Keep small parts away from young children.
Discard unneeded small parts and other objects, including
packaging materials and plastic bags/sheets to prevent
them from being played with by young children, creating
the potential risk of suffocation.

Set up

This Plasma TV may fall and can cause personal injury or

even death if not installed correctly. To prevent personal injury
or death, follow these warnings:

Install the Plasma TV in accordance with the

manufacturer’s recommended pedestal or stand,
corresponding hardware and installation instructions.

This Plasma TV is for use only with the following optional

accessories. Use with any other type of optional accessories
may cause instability. The following accessories are
manufactured by Panasonic Corporation.

• Wall-hanging bracket (Angled)
TY-WK4P1RW (TC-42PS14, TC-50PS14)
TY-WK5P1RW (TC-54PS14)

Be sure to ask a qualified technician to carry out the

installation and set-up.

Two or more people are required to install or remove the

television.

Some wall mounts (wall-hanging brackets) are not

designed to be mounted to walls with steel studs or old
cinder block constructions.

Ask your dealer or licensed contractor to properly secure the

wall-hanging bracket.

Do not place the Plasma TV or its stand on a sloped or

unstable surface.

The Plasma TV may fall or tip over.

Do not support the Plasma TV on a non-specified

pedestal.

Do not place the Plasma TV on furniture that can easily

be used as steps, such as a chest of drawers.
Do not climb or allow children to climb on the Plasma TV
Place or install the Plasma TV where it cannot be pushed,

pulled over or knocked down.
Route all cords and cables such that they cannot be

tripped over or pulled by curious children.
Do not place any objects on top of the Plasma TV.

If water spills onto the Plasma TV or foreign objects get

inside it, a short-circuit may occur which could result in fire

or electric shock. If any foreign objects get inside the Plasma

TV, please consult an Authorized Service Center.

AC Power Supply Cord

To prevent fire or electric shock:

The Plasma TV is designed to operate on a 120 V AC,

60 Hz service. Insert the power cord plug as far as it will

go into the wall socket.

If the plug is not fully inserted, heat may generate, which

could cause a fire.

The included power cord is for use with this unit only.
Do not use any power cord other than that provided with

this TV.
Do not handle the power cord plug with wet hands.

Do not do anything that might damage the power supply cord.

When disconnecting the power supply cord, hold the

plug, not the cord.

Do not use the power supply cord if the plug or cord is

damaged.

Replace the cord or contact your Authorized Service Center

Handling the power supply cord

Insert the power plug fully into the socket outlet. (If the

power plug is loose, it could generate heat and cause fire.)
Ensure that the power plug is easily accessible.
Ensure the earth pin on the power plug is securely

connected to prevent electrical shock.

•

An apparatus with CLASS I construction shall be connected to
a power socket outlet with a protective earthing connection.

Do not touch the power plug with a wet hand. (This may

cause electrical shock.)
Do not use any power cord other than that provided with

this TV. (This may cause fire or electrical shock.)
Do not damage the power cord. (A damaged cord may

cause fire or electrical shock.)

• Do not move the TV with the cord plugged in the socket
outlet.

• Do not place a heavy object on the cord or place the cord
near a high-temperature object.

• Do not twist the cord, bend it excessively, or stretch it.

• Do not pull on the cord. Hold onto the power plug body
when disconnecting cord.

• Do not use a damaged power plug or socket outlet.

If Problems Occur During Use

If a problem occurs (such as no picture or no sound),

or if smoke or an abnormal odor is detected from the
Plasma TV, unplug the power supply cord immediately.

Continued use of the TV under these conditions might cause

a fire or permanent damage to the TV. Have the TV evaluated
by an Authorized Service Center. Servicing of the TV by
unauthorized personnel is strongly discouraged due to its
high voltage.

If water or an object gets inside the Plasma TV, if the

Plasma TV is dropped, or if the enclosure becomes
damaged, unplug the power supply cord immediately.

A short-circuit may occur, which could cause a fire. Contact

an Authorized Service Center for an evaluation.

CAUTION

Do not cover the ventilation holes.

Doing so may cause the Plasma TV to overheat, which can

cause a fire or damage to the Plasma TV.

Leave a space of 3 15/16” (10 cm) or more at the top, left

and right, and 2 3/4” (7 cm) or more at the rear.

When using the pedestal, keep the space between the

bottom of the TV and the pedestal or stand surface clear
from objects that may obstruct ventilation.

When Moving the Plasma TV

Be sure to disconnect all cables before moving the

Plasma TV.

Moving the TV with its cables attached might damage the

cables which, in turn, can cause fire or electric shock

To prevent an electric shock, disconnect the power

plug from the wall outlet as a safety precaution before
carrying out any cleaning.

5

Safety Precautions (Continued)

Transport only in upright position

Transporting the unit with its display panel facing upright or

downward may cause damage to the internal circuitry.

Using a dry cloth, clean any dust from the power supply

cord and plug regularly.

Build-up of dust on the power cord plug can increase

humidity, which might damage the insulation and cause a fire.

This Plasma TV radiates infrared rays;

therefore, it may affect other infrared communication

equipment. Install your infrared sensor in a place away from
direct or reflected light from your Plasma TV.

The TV will still consume some power as long as the power
supply cord is connected to the wall outlet.

CEA CHILD SAFETY NOTICES: Flat panel displays are not always supported on the proper stands or
installed according to the manufacturer’s recommendations. Flat panel displays that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause
personal injury or even death.

The consumer electronics industry (of which Panasonic is a member) is committed to making home
entertainment enjoyable and safe. To prevent personal injury or death, be sure to follow the following safety
guidelines:

TUNE INTO SAFETY:

• One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use
of your flat panel display.

• Carefully read and understand all enclosed instructions for proper use of this product.

• Don’t allow children to climb on or play with furniture and television sets.

• Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.

• Remember that children can become excited while watching a program, especially on “larger than life”

flat panel displays. Care should be taken to install the display where it cannot be pushed, pulled over,
or knocked down.

• Care should be taken to route all cords and cables connected to the flat panel display so that they
cannot be pulled or grabbed by curious children.

WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:

• Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL, CSA, ETL).

• Follow all instructions supplied by the display and wall mount manufacturers.

• If you have any doubts about your ability to safely install your flat panel display, contact your retailer

about professional installation.

• Make sure the wall where you are mounting the display is appropriate. Some wall mounts are not
designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure,
contact a professional installer.

• A minimum of two people are required for installation. Flat panel displays can be heavy.

Display panel is made of glass. Do not apply strong force

or impact to the display panel.

This may cause damage resulting in injury.

The TV is heavy. TV should be handled by 2 or more

people. Support as shown to avoid injury by the TV
tipping or falling.

Panasonic recommends that a qualified installer perform the wall-mount
installation. See page 5.

6

Notes

Do not display a still picture for a long time

This causes the image to remain on the plasma screen
(“Image retention”). This is not considered a malfunction and is not covered by the warranty.

4 : 3

Typical still images

Channel number and other logos

•

Image displayed in 4:3 mode

•

SD Card photo • Video game • Computer image

•

Set up

■

Do not place the unit where it’s exposed to sunlight or other bright light (including reflections).
Use of some types of fluorescent lighting may reduce the remote control’s transmission range.

12

To prevent “Image retention”, the screen saver is
automatically activated after a few minutes if no signals are
sent or no operations are performed. (p. 53)

7

Accessories/Optional Accessory

Accessories

Check you have all the items shown.

Accessories

Remote Control
Transmitter

N2QAYB000321

AC cord Pedestal

TBLX0088

(TC-42PS14)

TBLX0089

(TC-50PS14)

Operating Instructions

Viera Concierge and basic
instruction for HDTV

Optional Accessory

Wall-hanging bracket

(angle)

TY-WK4P1RW (for 42”/50”)
TY-WK5P1RW (for 54”)

Batteries for the
Remote Control
Transmitter (2)

AA Battery

How to assemble (p. 9)

Product Registration Card (U.S.A.)

Customer Care Plan Card (U.S.A.)

Note

In order to maintain the TV’s performance and safety, be absolutely sure

to ask your dealer or a licensed contractor to secure the wall-hanging
brackets.

Carefully read the instructions accompanying the plasma TV stand or

pedestal, and be absolutely sure to take steps to prevent the TV from
tipping over.

Handle the TV carefully during installation since subjecting it to impact

or other forces may cause its panel to crack.

Cleaning cloth

TBLX0102

(TC-54PS14)

Installing the remote’s batteries

Caution

Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.

Do not mix old and new batteries.

•

Do not mix different battery types (such

•

as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd) batteries.

•

Do not burn or break batteries.

Hook

Open

Close

Note the correct polarity
(+ or -).

8

Attaching the pedestal to TV

Assembling the pedestal

■

Fix securely with assembly screws A. (Total 4 screws)
Tighten screws firmly.

A

Pole

R

L

Pole

Front

(Image: TBLX0088)

Set-up

■

Carry out work on a horizontal and level surface.
Tighten screws firmly.

B

Base

Bottom view

Accessories

Assembly screws
(4 of each)

A

(for 42”/50”)
M5 × 18 (Silver)
(for 54”)
M5 × 25 (Silver)

B

(for 42”/50”)
M5 × 25 (Black)
(for 54”)
M5 × 30 (Black)

Poles (2)

L

Quick Start

Guide

Accessories/Optional Accessory

R

Rear side

Arrow
mark

Hole for pedestal
installation

Pole

Pole

Base

(Image: TC-42PS14)

Warning

Do not disassemble or modify the pedestal.

Otherwise the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any other TV and displays.

Otherwise the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic

Dealer immediately.

During set-up, make sure that all screws are securely tightened.

If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be

strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

Fix securely with assembly

screws B. (Total 4 screws)

L or R is printed at the

bottom of the poles.

Base (1)

(for 42”/50”)

(for 54”)

9

Accessories/Optional Accessory

AC cord connection

To attach To remove

Insert it firmly until the
tabs on both sides click
into place.

(Continued)

Keep pushing both
side snaps and pull
down

Reference of connection

Antenna terminal Pin terminals HDMI terminal

greenbluered

green

Firmly tighten by hand.

Match colors of plugs and terminals.
Insert firmly.

Insert firmly.

10

To connect the antenna terminal and Cable Box

VIDEO

AUDIO

R

P

R

P

B

Y

L

H

VIDEO

AUDIO

R

P

B

Basic Connection

Example 1

TV

Cable TV

Connecting Antenna (To watch TV)

VHF/UHF Antenna

Cable TV

VHF/UHF Antenna

or

VHF/UHF Antenna

NTSC (National Television System Committee):

•

Conventional broadcasting
ATSC (Advanced Television Systems Committee):

•

Digital TV Standards include digital high-definition television

(HDTV), standard-definition television (SDTV), data broadcasting,
multi-channel surround-sound audio and interactive television.

Back of the TV

* See page 10

(AC cord
connection)

AC 120 V

60 Hz

AC Cord
(Connect after all the
other connections
have been made.)

Quick Start

Guide

Basic Connection (Antenna + TV)

Accessories/Optional Accessory

(If no Cable Box)

or

ANT OUTANT IN

Cable Box

Note

Not all cables and external equipment shown in this book are supplied with the TV.
For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.
When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first.
For additional assistance, visit us at: www.panasonic.com

Cable Box/Cable

You need to subscribe to a cable TV service to enjoy viewing their

•

programming.
If using a Cable Box, set the TV channel to CH3 or CH4 for regular cable.

•

You can enjoy high-definition programming by subscribing to a high-

•

definition cable Service.
The connection for high-definition can be done with the use of HDMI or
Component Video cable. (p. 14)
To view high-definition programming select the correct video input. (p. 24)

•

www.panasonic.ca

11

To connect the antenna terminal and DVD recorder or VCR

COMPONENT

IN

VIDEO IN 1

12

VIDEO

S VIDEO

AUDIO

R

P

R

P

B

Y

L

R

P

R

P

B

Y

LRL

HDMI 1 HDMI 2

VIDEO

AUDIO

P

R

Y

L

Basic Connection (Continued)

Example 2

TV

Connecting DVD recorder (VCR) (To record/playback)

AV Equipment
(e.g. DVD Recorder
or VCR)

VHF/UHF Antenna

DVD Recorder

If the source has a higher resolution signal (480p/720p/
1080i/1080p), connection can be made with the use of
a Component Video or HDMI cable. (p. 14)

VCR

Connection can be made with the use of an RF cable
and Composite Video/S Video cable. (p. 14)

VHF/UHF Antenna

AC Cord

Back of the TV

* See page 10

(AC cord
connection)

AC 120 V

60 Hz

12

ANT OUTANT IN

AV Equipment

(e.g. DVD Recorder or VCR)

(with TV tuner)

B

A

C

D

Connecting TV and AV equipment

Please refer to

- D on p. 14

A

To connect the antenna terminal and Satellite Receiver and DVD recorder or VCR

COMPONENT

IN

VIDEO IN 1

12

VIDEO

S VIDEO

AUDIO

R

P

R

P

B

Y

L

R

P

R

P

B

Y

LRL

HDMI 1 HDMI 2

VIDEO

AUDIO

P

R

P

B

Y

Example 3

Connecting DVD recorder (VCR) and satellite receiver

TV

DVD Recorder

or

VCR

Satellite

Receiver

VHF/UHF Antenna

You can enjoy high-definition
programming by subscribing to
high-definition satellite service.
Connection can be done with the
use of HDMI or Component Video
cable. (p. 14)

Quick Start

Guide

VHF/UHF Antenna

AC 120 V

60 Hz

Back of the TV

* See page 10

(AC cord
connection)

B

AC Cord

A

Basic Connection (TV + DVD Recorder or VCR + Satellite Receiver)

(TV + DVD Recorder or VCR)

C

ANT IN

Satellite Receiver DVD Recorder or VCR

Note

For details of external equipment connections, please refer to the operating manuals for the equipment.

ANT OUTANT IN

Connecting TV and AV equipment

Please refer to

(with TV tuner)

D

- D on p. 14.

A

13

High-Definition

Standard-Definition

Basic Connection (Continued)

COMPONENT

IN

12

R

P

R

P

B

Y

L

P

P

P

VIDEO IN 1

S VIDEO

R

P

R

P

B

LRL

R

P

B

VIDEO IN 1

R

P

R

P

B

LRL

R

P

R

P

B

AV cable connections

A

To use HDMI terminals

HDMI 1 HDMI 2

Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality sound.
The HDMI connection is required for a 1080p signal.
For “VIERA LinkTM connections”, please refer to p. 33.

B

To use COMPONENT terminals

green

blue

red

white

red

green

blue

red

white

red

Recorders may also be connected to COMPOSITE or S VIDEO terminals. (see below)

green

blue

red

white

red

Y

P

PR

R

HDMI
AV OUT

COMPONENT
VIDEO OUT

B

L

AUDIO
OUT

AV Equipment

e.g. Blu-ray Disc player

AV Equipment

e.g. Blu-ray Disc player

C

To use S VIDEO terminals

D

To use COMPOSITE terminals

14

Note

Some programs contain a copyright protection signal to prevent recording.

When the copyright protection program is displayed, do not connect the other TV monitor through a VCR. Video signals fed
through VCRs may be affected by copyright protection systems and the picture will be distorted on the other TV monitor.

For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.

The S Video input will override the composite video signal when S Video cable is connected. Connect

either S Video or Video cable.
Connecting to S VIDEO terminals will enable you to enjoy greater picture quality than using Composite

terminals.

white

red

yellow

white

red

white

red

yellow

white

red

white

red

yellow

white

red

S VIDEO
OUT

L

AUDIO

R

OUT

L

COMPOSITE
OUT

R

AV Equipment

e.g. DVD Recorder

or

e.g. VCR

AV Equipment

e.g. DVD Recorder

or

e.g. VCR

Identifying Controls

TV controls/indicators

Front of the TV

Selects channels
in sequence

Volume up/down

POWER
button

Note

The TV consumes a limited amount of power as long as the power cord is inserted into the wall outlet.
Do not place any objects between the TV remote control sensor and remote control.

Remote control sensor
Within about 23 feet
(7 meters) in front of
the TV set.

Power indicator
(on: red, off: no light)

C.A.T.S. sensor
Plasma C.A.T.S. (Contrast Automatic
Tracking System). (p. 28)

Displays the Main
menu.

Changes the input mode
Chooses menu and submenu entries.

Remote control

Back of the TV

HDMI input 3 connector

PC connector

Video Input 2 connector

Closed Caption On/Off (p. 19)

SD card slot

Quick Start

Guide

Identifying Controls

Basic Connection (AV cable connections)

Switches TV On or Off (Standby)

Changes the input mode (p. 24)

VIERA Link menu (p. 36-37)

Displays Sub Menu (p. 19, 30)

Colored buttons
(used for various functions)
(for example, p. 18, 22, 34)

Volume up/down

Sound mute On/Off

Changes aspect ratio (p. 20, 47)

Switches to previously viewed channel
or input modes.

External equipment operations
(p. 37)

Selects Audio Mode for TV viewing (p. 19)

Exits from menu screen

Displays Main Menu (p. 28)

Display VIERA TOOLS (p. 21)

Viewing from SD Card (p. 22-23)

Selects/OK/Change

Returns to previous menu

Channel up/down

Displays or removes the channel
banner (p. 20)

Operates the Favorite channel list
function. (p. 20)

Numeric keypad to select any channel
(p. 19) or press to enter alphanumeric
input in menus.
(p. 18, 24, 36, 38, 40, 43, 44)

Use for digital channels. (p. 19)

15

First Time Setup

“First time setup” is displayed only when the TV is turned on for the first time after the power cord is
inserted into a wall outlet and when “Auto power on” (p. 30-31) is set to “No”.

or

Turn the TV On with the POWER button

or

(Remote)(TV)

* This setting will be skipped next time if you select “Home Use”.

Select your language

Language

English FrançaisEspañol

select

ok

Be sure to select “Home Use”

Please select your viewing environment

Home Use Store Demonstration

Select “Home Use” when using this TV in your home.

Please confirm your selection (Home Use) before pressing OK button.

If you select “Store Demonstration” by mistake in ,

■

select

ok

confirmation screen will be displayed.

You are selecting the mode for store demonstration

Yes No

If you select “Yes”, the picture mode will regularly reset
to “Vivid” and a Picture Refresh message will be
displayed on the screen.

select

ok

16

Press to exit from

■

a menu screen

Press to return

■

to the previous
screen

Select “No” and return to previous screen .
If you select “Yes”, Screen enters store demonstration mode.

To display the “Please select your viewing environment” screen again as
shown above and select “Home Use”, do one of the following:

• Press and hold down the front POWER button.

• Unplug the TV and plug it again.

Adjust the clock

First time setup

Language

Clock

ANT/Cable setup

Input labels

next

select

Press to exit from

■

a menu screen

Note

To change setting

(Language/Clock/
ANT/Cable setup/
Input labels) later, go
to Menu screen
(p. 30)

Clock

Year

Month

Day

Hour

Minute

2009

1

7

10 AM

10

set

select item

Year: Select the year
Month: Select the month
Day: Select the day
Hour: Adjust the hour
Minute: Adjust the minute

Auto channel setup

Select “ANT/Cable setup”

First time setup

Language

Clock

ANT/Cable setup

Input labels

Select “ANT in”

ANT/Cable setup

ANT in

Auto program

Select "Not used" when no wire is connected to the "Antenna/Cable" terminal.

Typical when Cable/Satellite box is connected to a TV input.
Prevents accidental tuning to an unavailable signal.

Select “Auto program”

ANT/Cable setup

ANT in

Auto program

Cable

Cable

next

select

set

select

next

select

ANT in

Cable: Cable TV
Antenna

: Antenna

Not used

: Skip TV tuning

Quick Start

Guide

First Time Setup

go to

17

GAME

Video 2

PC

G A A

Select OK

RETURN

DeleteABC → abc

R G B Y

First Time Setup (Continued)

Select scanning mode (ALL channels/Analog only/Digital only)

Auto program

All channels

Analog only

Digital only

ok

select

Press to exit from

■

a menu screen

Note

About broadcasting

systems

Analog (NTSC):
Conventional

Digital (ATSC):
New

18

broadcasting

programming
that allows
you to view
more channels
featuring
high-quality video
and sound

Auto program

Progress

Number of analog channels

Number of digital channels

Press RETURN to quit

RETURN

Start scanning the channels

32%

Available channels (analog/digital) are automatically set.

0

All channels: Scans digital and analog channels
Analog only: Scans Analog channels only
Digital only: Scans Digital channels only

Confirm registered channels

program

Caption Favorite Add

...

...

...

CancelApply

...

Yes

...

Yes

...

Yes

If OK is not pressed after selecting “Apply”, the channels will not be saved.

The channel will be saved when no operation is performed for 60 seconds and

the “Manual program” menu will also exit automatically.

If you perform scanning more than twice, previously saved channels are erased.

select “Apply”

ok

Set the Input labels

First time setup

Language

Clock

ANT/Cable setup

Input labels

Input labels

Component 1

Component 2

HDMI 1

HDMI 2

HDMI 3

Video 1

Video 2

PC

GAME

or

Label: [BLANK] SKIP/VCR/DVD/CABLE/SATELLITE/DVR/GAME/AUX/RECEIVER/

COMPUTER/Blu-ray/CAMERA/DVD REC/HOME THTR/MONITOR/
MEDIA CTR/MEDIA EXT/OTHER

next

select

select

set

Switches Input mode alphabet to
numeric