Panasonic TC-54PS14, TC-42PS14 User Manual

Operating Instructions
42”/50”/54” Class 1080p Plasma HDTV
(41.6/49.9/54.1 inches measured diagonally)
Televisión de alta definición de 1080p y clase 42”/50”/54” de Plasma
(41,6/49,9/54,1 pulgadas medidas diagonalmente)
Model No.
Número de modelo
TC-42PS14 TC-50PS14 TC-54PS14
Quick Start Guide
(See page 8-18)
Guía de inicio rápido
(vea la página 8-18)
For assistance (U.S.A./Puerto Rico), please call: 1-877-95-VIERA (958-4372) or visit us at www.panasonic.com/contactinfo
For assistance (Canada), please call:
1-866-330-0014
or visit us at www.vieraconcierge.ca
Para solicitar ayuda (EE.UU./Puerto Rico), llame al:
1-877-95-VIERA (958-4372)
ó visítenos en www.panasonic.com/contactinfo
(Image: TC-42PS14)
English
Please read these instructions before operating your set and retain them for future reference. The images shown in this manual are for illustrative purposes only.
Español
Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en el futuro. Las imágenes mostradas en este manual tienen solamente fines ilustrativos.
TM
Turn your own living room into a movie theater!
Experience an amazing level of multimedia excitement
(Image: TC-42PS14)
HDMI, the HDMI logo and High-
Definition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC.
HDAVI Control™ is a trademark of
Panasonic Corporation.
VIERA Link™ is a trademark of
Panasonic Corporation.
Manufactured under license from Dolby
Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Laboratories.
SDHC Logo is a trademark.
2
Enjoy rich multimedia

Contents

Please read before using the unit
Safety Precautions ·······································4 Notes ···························································· 7
Amplifier Home theater system
VCR
Blu-ray Disc recorder
Set Top Box
DVD recorder/
SD memory card
Camcorder
Personal
computer
DVD player/
Blu-ray Disc player
Quick Start Guide
Accessories/Optional Accessory ····· 8 Basic Connection ····························11 Identifying Controls ························ 15 First Time Setup····························· 16
Enjoy your TV!
Basic Features
Watching TV ··············································· 19 Using VIERA TOOLS ·································21 Viewing from an SD Card ··························22 Watching Videos and DVDs ·······················24 Displaying PC Screen on TV ·····················26
Advanced Features
How to Use Menu Functions
(picture, sound quality, etc.) ······················· 28 VIERA LinkTM “HDAVI ControlTM” ················ 32 Lock ··························································· 38 Editing and Setting Channels····················· 40 Closed Caption ·········································· 42 Input Labels ··············································· 43 Using Timer ················································ 44 Recommended AV Connections ················45
Quick Start
Guide
Viewing Advanced FAQs, etc.
This product qualifies for ENERGY STAR in the “Home Use” setting and this is the setting in which energy savings will be achieved. Any modifications to the “Home Use” setting or other factory default settings could result in greater energy consumption beyond levels that meet ENERGY STAR qualifications.
FAQs, etc.
Ratings List for Lock ··································46 Technical Information ·································47 Care and Cleaning ····································· 51 FAQ ···························································· 52 Specifications ············································· 54 Limited Warranty
(for U.S.A. and Puerto Rico only)··············· 55 Customer Services Directory
(for U.S.A. and Puerto Rico) ······················ 56 Limited Warranty (for Canada) ···················57
3

Safety Precautions

The lightning flash with
CAUTION
RISK OF ELECTRIC SHOCK
WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set (including on shelves above, etc.).
DO NOT OPEN
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments / accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by Panasonic Corp. of North America could void the user’s authority to operate this device.
FCC Declaration of Conformity
Model No. TC-42PS14, TC-50PS14, TC-54PS14
Responsible Party: Panasonic Corporation of North America
Contact Source: Panasonic Consumer Electronics Company
email: consumerproducts@panasonic.com
CANADIAN NOTICE:
For Model TC-42PS14, TC-50PS14, TC-54PS14 This Class B digital apparatus complies with Canadian ICES-003.
One Panasonic Way, Secaucus, NJ 07094
1-877-95-VIERA (958-4372)
4
arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.
WARNING/CAUTION
WARNING
Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being played with by young children, creating the potential risk of suffocation.
Set up
This Plasma TV may fall and can cause personal injury or
even death if not installed correctly. To prevent personal injury or death, follow these warnings:
Install the Plasma TV in accordance with the
manufacturer’s recommended pedestal or stand, corresponding hardware and installation instructions.
This Plasma TV is for use only with the following optional
accessories. Use with any other type of optional accessories may cause instability. The following accessories are manufactured by Panasonic Corporation.
• Wall-hanging bracket (Angled) TY-WK4P1RW (TC-42PS14, TC-50PS14) TY-WK5P1RW (TC-54PS14)
Be sure to ask a qualified technician to carry out the
installation and set-up.
Two or more people are required to install or remove the
television.
Some wall mounts (wall-hanging brackets) are not
designed to be mounted to walls with steel studs or old cinder block constructions.
Ask your dealer or licensed contractor to properly secure the
wall-hanging bracket.
Do not place the Plasma TV or its stand on a sloped or
unstable surface.
The Plasma TV may fall or tip over.
Do not support the Plasma TV on a non-specified
pedestal.
Do not place the Plasma TV on furniture that can easily
be used as steps, such as a chest of drawers. Do not climb or allow children to climb on the Plasma TV Place or install the Plasma TV where it cannot be pushed,
pulled over or knocked down. Route all cords and cables such that they cannot be
tripped over or pulled by curious children. Do not place any objects on top of the Plasma TV.
If water spills onto the Plasma TV or foreign objects get
inside it, a short-circuit may occur which could result in fire
or electric shock. If any foreign objects get inside the Plasma
TV, please consult an Authorized Service Center.
AC Power Supply Cord
To prevent fire or electric shock:
The Plasma TV is designed to operate on a 120 V AC,
60 Hz service. Insert the power cord plug as far as it will
go into the wall socket.
If the plug is not fully inserted, heat may generate, which
could cause a fire.
The included power cord is for use with this unit only. Do not use any power cord other than that provided with
this TV. Do not handle the power cord plug with wet hands.
Do not do anything that might damage the power supply cord.
When disconnecting the power supply cord, hold the
plug, not the cord.
Do not use the power supply cord if the plug or cord is
damaged.
Replace the cord or contact your Authorized Service Center
Handling the power supply cord
Insert the power plug fully into the socket outlet. (If the
power plug is loose, it could generate heat and cause fire.) Ensure that the power plug is easily accessible. Ensure the earth pin on the power plug is securely
connected to prevent electrical shock.
An apparatus with CLASS I construction shall be connected to a power socket outlet with a protective earthing connection.
Do not touch the power plug with a wet hand. (This may
cause electrical shock.) Do not use any power cord other than that provided with
this TV. (This may cause fire or electrical shock.) Do not damage the power cord. (A damaged cord may
cause fire or electrical shock.)
• Do not move the TV with the cord plugged in the socket outlet.
• Do not place a heavy object on the cord or place the cord near a high-temperature object.
• Do not twist the cord, bend it excessively, or stretch it.
• Do not pull on the cord. Hold onto the power plug body when disconnecting cord.
• Do not use a damaged power plug or socket outlet.
If Problems Occur During Use
If a problem occurs (such as no picture or no sound),
or if smoke or an abnormal odor is detected from the Plasma TV, unplug the power supply cord immediately.
Continued use of the TV under these conditions might cause
a fire or permanent damage to the TV. Have the TV evaluated by an Authorized Service Center. Servicing of the TV by unauthorized personnel is strongly discouraged due to its high voltage.
If water or an object gets inside the Plasma TV, if the
Plasma TV is dropped, or if the enclosure becomes damaged, unplug the power supply cord immediately.
A short-circuit may occur, which could cause a fire. Contact
an Authorized Service Center for an evaluation.
CAUTION
Do not cover the ventilation holes.
Doing so may cause the Plasma TV to overheat, which can
cause a fire or damage to the Plasma TV.
Leave a space of 3 15/16” (10 cm) or more at the top, left
and right, and 2 3/4” (7 cm) or more at the rear.
When using the pedestal, keep the space between the
bottom of the TV and the pedestal or stand surface clear from objects that may obstruct ventilation.
When Moving the Plasma TV
Be sure to disconnect all cables before moving the
Plasma TV.
Moving the TV with its cables attached might damage the
cables which, in turn, can cause fire or electric shock
To prevent an electric shock, disconnect the power
plug from the wall outlet as a safety precaution before carrying out any cleaning.
5
Safety Precautions (Continued)
Transport only in upright position
Transporting the unit with its display panel facing upright or
downward may cause damage to the internal circuitry.
Using a dry cloth, clean any dust from the power supply
cord and plug regularly.
Build-up of dust on the power cord plug can increase
humidity, which might damage the insulation and cause a fire.
This Plasma TV radiates infrared rays;
therefore, it may affect other infrared communication
equipment. Install your infrared sensor in a place away from direct or reflected light from your Plasma TV.
The TV will still consume some power as long as the power supply cord is connected to the wall outlet.
CEA CHILD SAFETY NOTICES: Flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations. Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause personal injury or even death.
The consumer electronics industry (of which Panasonic is a member) is committed to making home entertainment enjoyable and safe. To prevent personal injury or death, be sure to follow the following safety guidelines:
TUNE INTO SAFETY:
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of your flat panel display.
Carefully read and understand all enclosed instructions for proper use of this product.
Don’t allow children to climb on or play with furniture and television sets.
Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.
Remember that children can become excited while watching a program, especially on “larger than life”
flat panel displays. Care should be taken to install the display where it cannot be pushed, pulled over, or knocked down.
Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL).
Follow all instructions supplied by the display and wall mount manufacturers.
If you have any doubts about your ability to safely install your flat panel display, contact your retailer
about professional installation.
Make sure the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer.
A minimum of two people are required for installation. Flat panel displays can be heavy.
Display panel is made of glass. Do not apply strong force
or impact to the display panel.
This may cause damage resulting in injury.
The TV is heavy. TV should be handled by 2 or more
people. Support as shown to avoid injury by the TV tipping or falling.
Panasonic recommends that a qualified installer perform the wall-mount installation. See page 5.
6

Notes

Do not display a still picture for a long time
This causes the image to remain on the plasma screen (“Image retention”). This is not considered a malfunction and is not covered by the warranty.
4 : 3
Typical still images
Channel number and other logos
Image displayed in 4:3 mode
SD Card photo • Video game • Computer image
Set up
Do not place the unit where it’s exposed to sunlight or other bright light (including reflections). Use of some types of fluorescent lighting may reduce the remote control’s transmission range.
12
To prevent “Image retention”, the screen saver is automatically activated after a few minutes if no signals are sent or no operations are performed. (p. 53)
7

Accessories/Optional Accessory

Accessories
Check you have all the items shown.
Accessories
Remote Control Transmitter
N2QAYB000321
AC cord Pedestal
TBLX0088
(TC-42PS14)
TBLX0089
(TC-50PS14)
Operating Instructions
Viera Concierge and basic instruction for HDTV
Optional Accessory
Wall-hanging bracket
(angle)
TY-WK4P1RW (for 42”/50”) TY-WK5P1RW (for 54”)
Batteries for the Remote Control Transmitter (2)
AA Battery
How to assemble (p. 9)
Product Registration Card (U.S.A.)
Customer Care Plan Card (U.S.A.)
Note
In order to maintain the TV’s performance and safety, be absolutely sure
to ask your dealer or a licensed contractor to secure the wall-hanging brackets.
Carefully read the instructions accompanying the plasma TV stand or
pedestal, and be absolutely sure to take steps to prevent the TV from tipping over.
Handle the TV carefully during installation since subjecting it to impact
or other forces may cause its panel to crack.
Cleaning cloth
TBLX0102
(TC-54PS14)
Installing the remote’s batteries
Caution
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
Do not mix old and new batteries.
Do not mix different battery types (such
as alkaline and manganese batteries). Do not use rechargeable (Ni-Cd) batteries.
Do not burn or break batteries.
Hook
Open
Close
Note the correct polarity (+ or -).
8
Attaching the pedestal to TV
Assembling the pedestal
Fix securely with assembly screws A. (Total 4 screws) Tighten screws firmly.
A
Pole
R
L
Pole
Front
(Image: TBLX0088)
Set-up
Carry out work on a horizontal and level surface. Tighten screws firmly.
B
Base
Bottom view
Accessories
Assembly screws (4 of each)
A
(for 42”/50”) M5 × 18 (Silver) (for 54”) M5 × 25 (Silver)
B
(for 42”/50”) M5 × 25 (Black) (for 54”) M5 × 30 (Black)
Poles (2)
L
Quick Start
Guide
Accessories/Optional Accessory
R
Rear side
Arrow mark
Hole for pedestal installation
Pole
Pole
Base
(Image: TC-42PS14)
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Fix securely with assembly
screws B. (Total 4 screws)
L or R is printed at the
bottom of the poles.
Base (1)
(for 42”/50”)
(for 54”)
9
Accessories/Optional Accessory
AC cord connection
To attach To remove
Insert it firmly until the tabs on both sides click into place.
(Continued)
Keep pushing both side snaps and pull down
Reference of connection
Antenna terminal Pin terminals HDMI terminal
greenbluered
green
Firmly tighten by hand.
Match colors of plugs and terminals. Insert firmly.
Insert firmly.
10
To connect the antenna terminal and Cable Box
VIDEO
AUDIO
R
P
R
P
B
Y
L
H
VIDEO
AUDIO
R
P
B

Basic Connection

Example 1
TV
Cable TV
Connecting Antenna (To watch TV)
VHF/UHF Antenna
Cable TV
VHF/UHF Antenna
or
VHF/UHF Antenna
NTSC (National Television System Committee):
Conventional broadcasting ATSC (Advanced Television Systems Committee):
Digital TV Standards include digital high-definition television
(HDTV), standard-definition television (SDTV), data broadcasting, multi-channel surround-sound audio and interactive television.
Back of the TV
* See page 10
(AC cord connection)
AC 120 V
60 Hz
AC Cord (Connect after all the other connections have been made.)
Quick Start
Guide
Basic Connection (Antenna + TV)
Accessories/Optional Accessory
(If no Cable Box)
or
ANT OUTANT IN
Cable Box
Note
Not all cables and external equipment shown in this book are supplied with the TV. For more details on the external equipment’s connections, please refer to the operating manuals for the equipment. When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first. For additional assistance, visit us at: www.panasonic.com
Cable Box/Cable
You need to subscribe to a cable TV service to enjoy viewing their
programming. If using a Cable Box, set the TV channel to CH3 or CH4 for regular cable.
You can enjoy high-definition programming by subscribing to a high-
definition cable Service. The connection for high-definition can be done with the use of HDMI or Component Video cable. (p. 14) To view high-definition programming select the correct video input. (p. 24)
www.panasonic.ca
11
To connect the antenna terminal and DVD recorder or VCR
COMPONENT
IN
VIDEO IN 1
12
VIDEO
S VIDEO
AUDIO
R
P
R
P
B
Y
L
R
P
R
P
B
Y
LRL
HDMI 1 HDMI 2
VIDEO
AUDIO
P
R
Y
L
Basic Connection (Continued)
Example 2
TV
Connecting DVD recorder (VCR) (To record/playback)
AV Equipment (e.g. DVD Recorder or VCR)
VHF/UHF Antenna
DVD Recorder
If the source has a higher resolution signal (480p/720p/ 1080i/1080p), connection can be made with the use of a Component Video or HDMI cable. (p. 14)
VCR
Connection can be made with the use of an RF cable and Composite Video/S Video cable. (p. 14)
VHF/UHF Antenna
AC Cord
Back of the TV
* See page 10
(AC cord connection)
AC 120 V
60 Hz
12
ANT OUTANT IN
AV Equipment
(e.g. DVD Recorder or VCR)
(with TV tuner)
B
A
C
D
Connecting TV and AV equipment
Please refer to
- D on p. 14
A
To connect the antenna terminal and Satellite Receiver and DVD recorder or VCR
COMPONENT
IN
VIDEO IN 1
12
VIDEO
S VIDEO
AUDIO
R
P
R
P
B
Y
L
R
P
R
P
B
Y
LRL
HDMI 1 HDMI 2
VIDEO
AUDIO
P
R
P
B
Y
Example 3
Connecting DVD recorder (VCR) and satellite receiver
TV
DVD Recorder
or
VCR
Satellite
Receiver
VHF/UHF Antenna
You can enjoy high-definition programming by subscribing to high-definition satellite service. Connection can be done with the use of HDMI or Component Video cable. (p. 14)
Quick Start
Guide
VHF/UHF Antenna
AC 120 V
60 Hz
Back of the TV
* See page 10
(AC cord connection)
B
AC Cord
A
Basic Connection (TV + DVD Recorder or VCR + Satellite Receiver)
(TV + DVD Recorder or VCR)
C
ANT IN
Satellite Receiver DVD Recorder or VCR
Note
For details of external equipment connections, please refer to the operating manuals for the equipment.
ANT OUTANT IN
Connecting TV and AV equipment
Please refer to
(with TV tuner)
D
- D on p. 14.
A
13
High-Definition
Standard-Definition
Basic Connection (Continued)
COMPONENT
IN
12
R
P
R
P
B
Y
L
P
P
P
VIDEO IN 1
S VIDEO
R
P
R
P
B
LRL
R
P
B
VIDEO IN 1
R
P
R
P
B
LRL
R
P
R
P
B
AV cable connections
A
To use HDMI terminals
HDMI 1 HDMI 2
Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality sound. The HDMI connection is required for a 1080p signal. For “VIERA LinkTM connections”, please refer to p. 33.
B
To use COMPONENT terminals
green
blue
red
white
red
green
blue
red
white
red
Recorders may also be connected to COMPOSITE or S VIDEO terminals. (see below)
green
blue
red
white
red
Y
P
PR
R
HDMI AV OUT
COMPONENT VIDEO OUT
B
L
AUDIO OUT
AV Equipment
e.g. Blu-ray Disc player
AV Equipment
e.g. Blu-ray Disc player
C
To use S VIDEO terminals
D
To use COMPOSITE terminals
14
Note
Some programs contain a copyright protection signal to prevent recording.
When the copyright protection program is displayed, do not connect the other TV monitor through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the other TV monitor.
For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.
The S Video input will override the composite video signal when S Video cable is connected. Connect
either S Video or Video cable. Connecting to S VIDEO terminals will enable you to enjoy greater picture quality than using Composite
terminals.
white
red
yellow
white
red
white
red
yellow
white
red
white
red
yellow
white
red
S VIDEO OUT
L
AUDIO
R
OUT
L
COMPOSITE OUT
R
AV Equipment
e.g. DVD Recorder
or
e.g. VCR
AV Equipment
e.g. DVD Recorder
or
e.g. VCR

Identifying Controls

TV controls/indicators
Front of the TV
Selects channels in sequence
Volume up/down
POWER button
Note
The TV consumes a limited amount of power as long as the power cord is inserted into the wall outlet. Do not place any objects between the TV remote control sensor and remote control.
Remote control sensor Within about 23 feet (7 meters) in front of the TV set.
Power indicator (on: red, off: no light)
C.A.T.S. sensor Plasma C.A.T.S. (Contrast Automatic Tracking System). (p. 28)
Displays the Main menu.
Changes the input mode Chooses menu and submenu entries.
Remote control
Back of the TV
HDMI input 3 connector
PC connector
Video Input 2 connector
Closed Caption On/Off (p. 19)
SD card slot
Quick Start
Guide
Identifying Controls
Basic Connection (AV cable connections)
Switches TV On or Off (Standby)
Changes the input mode (p. 24)
VIERA Link menu (p. 36-37)
Displays Sub Menu (p. 19, 30)
Colored buttons (used for various functions) (for example, p. 18, 22, 34)
Volume up/down
Sound mute On/Off
Changes aspect ratio (p. 20, 47)
Switches to previously viewed channel or input modes.
External equipment operations (p. 37)
Selects Audio Mode for TV viewing (p. 19)
Exits from menu screen
Displays Main Menu (p. 28)
Display VIERA TOOLS (p. 21)
Viewing from SD Card (p. 22-23)
Selects/OK/Change
Returns to previous menu
Channel up/down
Displays or removes the channel banner (p. 20)
Operates the Favorite channel list function. (p. 20)
Numeric keypad to select any channel (p. 19) or press to enter alphanumeric input in menus. (p. 18, 24, 36, 38, 40, 43, 44)
Use for digital channels. (p. 19)
15

First Time Setup

“First time setup” is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p. 30-31) is set to “No”.
or
Turn the TV On with the POWER button
or
(Remote)(TV)
* This setting will be skipped next time if you select “Home Use”.
Select your language
Language
English FrançaisEspañol
select
ok
Be sure to select “Home Use”
Please select your viewing environment
Home Use Store Demonstration
Select “Home Use” when using this TV in your home.
Please confirm your selection (Home Use) before pressing OK button.
If you select “Store Demonstration” by mistake in ,
select
ok
confirmation screen will be displayed.
You are selecting the mode for store demonstration
Yes No
If you select “Yes”, the picture mode will regularly reset to “Vivid” and a Picture Refresh message will be displayed on the screen.
select
ok
16
Press to exit from
a menu screen
Press to return
to the previous screen
Select “No” and return to previous screen . If you select “Yes”, Screen enters store demonstration mode.
To display the “Please select your viewing environment” screen again as shown above and select “Home Use”, do one of the following:
• Press and hold down the front POWER button.
• Unplug the TV and plug it again.
Adjust the clock
First time setup
Language
Clock
ANT/Cable setup
Input labels
next
select
Press to exit from
a menu screen
Note
To change setting
(Language/Clock/ ANT/Cable setup/ Input labels) later, go to Menu screen (p. 30)
Clock
Year
Month
Day
Hour
Minute
2009
1
7
10 AM
10
set
select item
Year: Select the year Month: Select the month Day: Select the day Hour: Adjust the hour Minute: Adjust the minute
Auto channel setup
Select “ANT/Cable setup”
First time setup
Language
Clock
ANT/Cable setup
Input labels
Select “ANT in”
ANT/Cable setup
ANT in
Auto program
Select "Not used" when no wire is connected to the "Antenna/Cable" terminal.
Typical when Cable/Satellite box is connected to a TV input. Prevents accidental tuning to an unavailable signal.
Select “Auto program”
ANT/Cable setup
ANT in
Auto program
Cable
Cable
next
select
set
select
next
select
ANT in
Cable: Cable TV Antenna
: Antenna
Not used
: Skip TV tuning
Quick Start
Guide
First Time Setup
go to
17
GAME
Video 2
PC
G A A
Select OK
RETURN
DeleteABC abc
R G B Y
First Time Setup (Continued)
Select scanning mode (ALL channels/Analog only/Digital only)
Auto program
All channels
Analog only
Digital only
ok
select
Press to exit from
a menu screen
Note
About broadcasting
systems
Analog (NTSC): Conventional
Digital (ATSC): New
18
broadcasting
programming that allows you to view more channels featuring high-quality video and sound
Auto program
Progress
Number of analog channels
Number of digital channels
Press RETURN to quit
RETURN
Start scanning the channels
32%
Available channels (analog/digital) are automatically set.
0
All channels: Scans digital and analog channels Analog only: Scans Analog channels only Digital only: Scans Digital channels only
Confirm registered channels
program
Caption Favorite Add
...
...
...
CancelApply
...
Yes
...
Yes
...
Yes
If OK is not pressed after selecting “Apply”, the channels will not be saved.
The channel will be saved when no operation is performed for 60 seconds and
the “Manual program” menu will also exit automatically.
If you perform scanning more than twice, previously saved channels are erased.
select “Apply”
ok
Set the Input labels
First time setup
Language
Clock
ANT/Cable setup
Input labels
Input labels
Component 1
Component 2
HDMI 1
HDMI 2
HDMI 3
Video 1
Video 2
PC
GAME
or
Label: [BLANK] SKIP/VCR/DVD/CABLE/SATELLITE/DVR/GAME/AUX/RECEIVER/
COMPUTER/Blu-ray/CAMERA/DVD REC/HOME THTR/MONITOR/ MEDIA CTR/MEDIA EXT/OTHER
next
select
select
set
Switches Input mode alphabet to numeric
Loading...
+ 40 hidden pages