Q1: How do I connect aerial to the TV?
A1: Connect the Aerial plug to VHF or UHF socket of the television using the right cable
Q2: When using the remote, which kind of batteries do I require?
A2: The kind of batteries needed for the remote control are two alkaline R6 size batteries.
Q3: What steps do I need to take to automatically tune the TV to locate the available channels?
A3: Channel’s that are available can be automatically saved using the Automatic Search function by pressing the PRESET button first, then pressing the Auto Function button.
Q4: In a case where a TV station refuses to broadcast, what will occur?
A4: If the TV has not been switched off then after a maximum period of thirty minutes the TV will automatically go into standby mode.
Q5: Is it possible for me to eliminate certain programme numbers from the TV?
A5: Yes, if there has been no channel linked with a programme number then it is possible to eliminate that particular number by selecting the number and pressing the “-” button to eliminate setting mode.
Q6: Is it possible for this television to reduce the amount of noise emitted?
A6: Yes there is a function which Picture Reduction Noise which comes with the TV which allows the remote control to be used to turn it on.
Q7: The number of channels that this television set can retain is how many?
A7: The average allowed for these types of TV sets are 30 channels, this TV is no different.
Q8: Is it possible for me to connect certain other devices with this television set?
A8: Yes VHS players and cameras are among the devices that can connect through to AV1 and AV2 input terminal ports.