Panasonic TC-19LX50N, TC-19LE50N, TC-23LE50N, TC-19LE50, TC-23LX50N User Manual

R-STANDBY G-POWER ON

SAP

POWER

DB
S

/

R

C
B

C

L

V

D
V

D

V
T

CH

O K

VOL VOL

CH

RETURN

MENU

EXIT

GUIDERECALL MUTETV/VIDEO

R-TUNE

PAUSE

ASPECT
TV/VCR

123

456

78

9

SLEEP
PROG

0

PLAY

FFREW

REC

STOP

VCR/DBS CH

T V

Operating Instructions

LCD Television

Model No.

TC-19LX50
TC-23LX50
TC-19LE50
TC-23LE50

TV screen image is simulated.
LCD TV shown above is model TC-23LX50.

For assistance, please call : 1-800-211-PANA (7262)

or visit us at www.panasonic.com/contactinfo (U.S.A.)

For assistance, please call : 787-750-4300

or visit us at www.panasonic.com (Puerto Rico)

For assistance, please call : 1-800-561-5505

or visit us at www.panasonic.ca (Canada)

Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.

English

Espan˜ol

[Resumen]

TQBC0994

Important Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrow
head within a triangle is intended
to tell the user that parts inside
the product are a risk of electric
shock to persons.

The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are in
the papers with the appliance.

■ Note to CATV System Installer: This reminder is provided to direct the CATV system installer’s

attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the building, as close to the point of
cable entry as practical.

■ Secure ventilation

Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure reliable
operation of the LCD TV and to protect it from overheating. These openings must not be blocked or covered.
There should be at least 10 cm of space from these openings. The openings should never be blocked by
placing the LCD TV on a bed, sofa, rug or other similar surface. This LCD TV should not be placed in a built­in installation such as a bookcase unless proper ventilation is provided.

■ Important Safety Instructions for LCD TV

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.

11) Only use attachments / accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart / apparatus
combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.

15) Operate only from the type of power source indicated on the marking label. If you are not sure of the
type of power supplied to your home consult your television dealer or local power company.

16) Follow all warnings and instructions marked on the LCD TV.

17) Never push objects of any kind into this LCD TV through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the LCD TV.

2

Important Safety Instructions

18) If an outside antenna is connected to the
television
is grounded so as to provide some protection

equipment, be sure the antenna system

against voltage surges and built up static
charges. In the U.S. Section 810-21 of the
National Electrical Code provides information
with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.

19) An outside antenna system should not be located
in the vicinity of overhead power lines or other

EXAMPLE OF ANTENNA
GROUNDING AS PER (NEC)
NATIONAL ELECTRICAL
CODE

GROUND
CLAMP

ELECTRIC
SERVICE
EQUIPMENT

ANTENNA
LEAD-IN WIRE

ANTENNA
DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

electric light or power circuits, or where it can fall into such power lines or circuits. When installing an
outside antenna system extreme care should be taken to keep from touching such power lines or circuits
as contact with them might be fatal.

20) Unplug this LCD TV from the wall outlet, and refer servicing to qualified service personnel under the
following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the LCD TV.
c. If the LCD TV has been exposed to rain or water.
d. If the LCD TV does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions as improper adjustment of
other controls may result in damage and will often require extensive work by a qualified technician to

restore the LCD TV to normal operation.
e. If the LCD TV has been dropped or the cabinet has been damaged.
f. When the LCD TV exhibits a distinct change in performance - this indicates a need for service.

21) When replacement parts are required, be sure the service technician uses replacement parts specified by
the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may
result in fire, electric shock, or other hazards.

22) WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.
DO NOT PLACE LIQUID CONTAINERS (FLOWER VASES, CUPS, COSMETICS, ETC.)
ABOVE THE SET. (INCLUDING ON SHELVES ABOVE, ETC.)

23) WARNING : KEEP UNNEEDED SMALL PARTS AND OTHER OBJECTS OUT OF THE REACH OF

SMALL CHILDREN. THESE OBJECTS CAN BE ACCIDENTALLY SWALLOWED. ALSO,
BE CAREFUL ABOUT PACKAGING MATERIALS AND PLASTIC SHEETS.

24) CAUTION :

TO PREVENT ELECTRIC SHOCK DO NOT USE THIS PLUG WITH A RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

25) CAUTION : USE WITH OTHER STAND MAY RESULT IN INSTABILITY POSSIBLY CAUSING INJURY.

26) CAUTION : DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY

WITH THE SAME OR EQUIVALENT TYPE.

NOTE :•This equipment is designed to operate in North America and other countries where the

broadcasting system and AC house current are exactly the same as in North America.

■

This product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of mercury. Disposal of

these materials may be regulated in your community due to environmental considerations. For disposal or recycling
information please contact your local authorities, or the Electronics Industries Alliance:

www.eiae.org.

3

Dear Panasonic Customer

Welcome to the Panasonic family of customers.
We hope that you will have many years of enjoyment from your new LCD TV.
To obtain maximum benefit from your set, please read these instructions before
making any adjustments, and retain them for future reference.
Retain your purchase receipt, and record the model number and serial number
of your set in the space provided on the rear cover of these instructions.

For assistance, please call : 1-800-211-PANA (7262)

or visit us at www.panasonic.com/contactinfo (U.S.A.)

For assistance, please call : 787-750-4300

or visit us at www.panasonic.com (Puerto Rico)

For assistance, please call : 1-800-561-5505

or visit us at www.panasonic.ca (Canada)

Federal Communication Commission Information

This equipment has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause or receive interference, which can be determined by turning
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

Reorient or relocate the TV antenna.
Increase the separation between TV and other equipment.
Connect TV into separate outlet from other equipment.
Consult the dealer or an experienced radio / TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate this equipment.

The ENERGY STAR
Environmental Protection Agency (EPA) and the U.S. Department of Energy
(DOE) to help customers identify products that can save them money and protect
the environment by saving energy. ENERGY STAR
consume less energy than similar standard products.

label, a symbol for energy efficiency, was created by the U.S.

compliant products generally

4

Table of Contents

Important Safety Instructions .............................. 2

Maintenance .......................................................... 5

SUPPLIED ACCESSORIES ................................... 6

Remote control battery installation ...................... 6

Installation ............................................................. 7

Connections .......................................................... 8

Antenna Connection ............................................ 8

Cable Box Connection ......................................... 8

Connecting Other Equipment .............................. 9

Connecting Headphones / Earphones ............... 10

Power ON / OFF ................................................... 10

Basic Controls ..................................................... 11

Menu Operations ................................................. 12

Tuning Channels ................................................. 14

LOCK .................................................................... 15

CLOSED CAPTION .............................................. 19

INPUT LABEL ...................................................... 19

OTHER ADJUST .................................................. 20

PICTURE ADJUST ............................................... 21

POSITION/SIZE .................................................... 22

AUDIO ADJUST ................................................... 23

ASPECT Controls ................................................ 24

Operating peripheral equipment using

the remote control............................................ 25

Programming the remote control code .............. 25

Infrared Code Index ........................................... 26

Mode Operational Key Chart ............................. 28

Manuel de instrucciones [ Resumen ]

Instalación .................................................. 29

Instalación de las pilas del mando a distancia

Conexión .................................................... 30

Conexión de antena .................................. 30

Conexión del receptor de TV por cable ..... 30

Conexión de otro equipo ........................... 31

Conexión de auriculares ............................ 32

Conexión / desconexión de la alimentación ...

Controles básicos ...................................... 33

Operaciones con menús ........................... 34

Sintonización de canales .......................... 36

Troubleshooting .................................................. 37

CUSTOMER SERVICES DIRECTORY (for U.S.A.) ............ 38

Specifications ...................................................... 39

..... 29

32

Maintenance

To clean this unit, wipe with a soft, dry cloth.

If the surfaces are extremely dirty, use a soft cloth dipped in a soap and
water solution or a weak detergent solution.

• Use eyeglass cleaner to remove stubborn dirt from the LCD.

• Never use alcohol, paint thinner or benzine to clean this unit.

• Before using a chemically treated cloth, carefully read the instructions that
came with the cloth.

CAUTION :

If water or other liquid enters the monitor through the display panel surface, a malfunction may occur.

Mild
detergent

5

SUPPLIED ACCESSORIES

Check the accessories before installation.

• Operating Instructions • Remote Control

Transmitter
(EUR7613Z90R)

• Batteries for the
Remote Control
Transmitter
(2 × AA size)

• Warranty Card

• Product Registration Card and
Customer Care Plan Card (For
U.S.A.)

• F-Type Antenna Connector
(for 4C-2V) ( × 1)

Remote control battery installation

Requires two AA batteries.

1. Open the battery cover.

Precaution on battery use

Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Disposal of batteries should be in an environmentally friendly manner.

1. Always use new batteries when replacing the old set.

2. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.

3. Battery replacement is necessary when remote control acts sporadically or fails to operate this unit.

2. Install the batteries.
Note the correct polarity (+ and -).

Two AA size

3. Replace the cover.

Notes:

• Do not drop, apply shock to or step on the remote control.

• Do not spill water on the remote control.

• Do not place objects between the remote control and remote control receiver.

• Do not use remote controls for other equipment at the same time.

• If the TV does not operate even when using the remote control from a close range, it is time to replace
the batteries.

6

Installation

Receiver Location

Locate at a comfortable distance for viewing. Avoid placing where sunlight or other bright light (including
reflections) will fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive
heat or moisture.

How to use the LCD stand

Adjust the stand to your desired angle. The stand angle can be adjusted between 5 ° forward and 10 °
back, and rotated 20 ° to the right / left.

POWER TV/VIDEO – VOL + CH

Optional External Equipment

The Video / Audio connection between components can be made with shielded video and audio cables. For
best performance, antenna cables should utilize 75 ohm coaxial shielded wire. Cables are available from
your dealer or electronic supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various
components require. Also determine the length of cable you’ll need.

For optimum quality picture

When the LCD is exposed to light from outdoors or lighting fixtures, high-contrast pictures may not be displayed
clearly. Turn off florescent lamps near the LCD and place in a location not exposed to outdoor light.

How to hang the LCD Television on the wall

This LCD Television is for use only with the following optional accessory. Use with any other type of optional
accessories may cause instability which could result in the possibility of injury.

Wall-hanging bracket ........................................................ TY-WK22LR1W

•

Always be sure to ask a
qualified technician to carry
out set-up.

7

Connections

Note:

Cables and connectors are not supplied with this set.

Antenna Connection

For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor
antenna is recommended. The antenna mode must be set to TV (see page 14, Mode selection).

Back of the TV

Antenna Terminal

ANT

75 Ohm

F-Type Antenna
Connector

Coaxial Cable

Cable Box Connection

• For reception of cable channels (01 - 125), connect the cable supplied by your local cable company. The
antenna mode must be set to CABLE (see page 14, Mode selection).

• Certain cable systems offset some channels to reduce interference or view Premium (scrambled) channels.
A cable converter box is required for proper reception. Check with your local cable company for its
compatibility requirements.

• Set the TV channel to CH3 or CH4 when using this connection.

UHF AntennaVHF Antenna

Mixer

Cable Box

Back of the TV

Cable Box and VCR

Back of the TV

ANT

ANT

OUTPUT

OUTPUT

ANT OUTPUT ANT INPUT

INPUT

INPUT

Incoming 75 Ohm Cable
from Cable Company

CABLE BOX

Incoming 75 Ohm Cable
from Cable Company

CABLE BOX

VCR

8

Connecting Other Equipment

Rear Input Terminals

To bundle the cables with the clamper

1. Pull upward.

Note:

To avoid noise do not put the antenna cable
and the power cord together.

2. Put the cables in
the clamper and
close.

Connections

Back of the TV

COMPONENT VIDEO OUT

DVD / STB

Super-VHS VCR

Y

P

P

Audio

OUT

R

COMPONENT VIDEO cable

B

R

L

AUDIO cable

COMPONENT VIDEO INPUT

Y

VIDEO

P

B

PR

L

AUDIO

R

INPUT

21

S-VIDEO

VIDEO

AUDIO OUT

S-VIDEO cable

S-Video

CAMCORDER

OUT

VIDEO cable

Video

OUT

VIDEO GAME
CONSOLE

Audio

OUT

R

L

AUDIO cable

Notes:

• When connecting video cables, priority is given to the S-Video cable when both the S-VIDEO input terminal
and the VIDEO input terminal are connected.

• Please make inquiries of video game manufacturers concerning component cables to connect with video
game console.

Rear Output Terminals

L

Audio

IN

R

AUDIO cable

COMPONENT VIDEO INPUT

Y

VIDEO

B

P

PR

L

AUDIO

R

21

INPUT

S-VIDEO

VIDEO

AUDIO OUT

Back of the TV

9

Connections

Connecting Headphones / Earphones

M3 plug (Not supplied)

Power ON / OFF

Preparation

Connect the plug to the wall outlet.

Note:

The TV consumes some power as long as the power
cord is inserted into the wall outlet.

Main POWER
switch

Remote control
sensor

C.A.T.S. sensor

LCD C.A.T.S. (Contrast Automatic Tracking
System) automatically senses the ambient
light conditions and adjusts the brightness and
gradation accordingly, to optimize contrast.
C.A.T.S. is in effect when PIC MODE is set to
AUTO (see page 21).

POWER TV/VIDEO – VOL + CH

R-STANDBY G-POWER ON

R-STANDBY G-POWER ON

Power Indicator

On the main unit

On the remote control

POWER

POWER

Back of the TV

AC120V, 60Hz

Power cord

Press to turn the TV’s main power on / off.

• Power indicator
Main power ON: Green
Main power OFF: No light

Press to turn the TV on / off.

• Power indicator
Power ON : Green
Power OFF (Standby): Red

• This does not work when the main
power is off (No light) (see above).

Note:

The screen below is displayed for a few
moments when the TV is turned on.

ZOOM

CH 6

STEREO

SAP

MONO

10

POWER

TV

VCR

DBS/

CBL

SAP

DVD

Note:

Select the menu language before operating the TV (see
pages 12, 13, LANGUAGE).

Buttons

Buttons

Basic Controls

< Top Side Controls >

POWER TV/VIDEO – VOL + CH

TV/VIDEO button

Volume Up/Down

Main POWER switch

Press to turn the TV’s main
power on/off.(see page 10)

Channel Up/Down

Power button

Press to turn the TV ON or OFF.

Note:

The TV’s power cord must first be plugged
into the wall outlet and then the TV can
be turned on using the POWER switch.

Direct program number
selection buttons

R-TUNE

R-TUNE button

Switches to previously viewed
channel or video mode.
Not effective under the following
conditions:

1. Right after the TV is turned on.

2. After switching TV / CATV
(MODE in PROGRAM
CHANNELS).

3. Right after the ACP (Automatic
channel programming)
execution.

4. When the same channel as the
present channel is selected.

SLEEP

PROG dash button / SLEEP TIMER button

PROG

Program dash channel numbers
for DTV and DBS.
Sleep timer (MINUTES)

0306090

ASPECT

ASPECT button

TV/VCR

Change screen size (see page 24).

JUST ZOOM FULL NORMAL

Remote control sensor
Within about 23 feet (7
meters) in front of the
TV set.

R-STANDBY G-POWER ON

POWER

D

BS/

VCR

V

T

CH

O K

VOL VOL

CH

MENU

123

456

78

R-TUNE

0

PLAY

STOP

PAUSE

ASPECT
TV/VCR

VCR/DBS CH

T V

C

BL

SLEEP
PROG

REC

9

FFREW

SAP

DVD

RETURN
EXIT

GUIDERECALL MUTETV/VIDEO

SAP button

Selects Audio mode (see page 23).

STEREO SAP MONO

Mode Selection buttons

Digital Broadcasting Satellite mode for
Remote Control / Cable TV Mode Selection
for Remote Control

VCR Mode Selection
for Remote Control

VCR

TV

Digital Video
Disc Mode
Selection for
Remote Control

DBS/CBL

DVD

TV Mode Selection for Remote Control

Changes to the next channel up

Moves cursor upward during menu mode.

Reduces volume

Moves cursor to
the left during
menu mode.

Displays menu

Press to access
TV, DTV, DBS
or DVD menus.

Increases volume

Moves cursor to
the right during
menu mode.

CH

O K

VOL VOL

CH

MENU

RETURN
EXIT

Press to Return
to previous
MENU or EXIT
from menu.

Changes to the next channel down

Moves cursor downward during menu mode.

Press to display input mode menu.
While the menu is displayed, press
again to change the input mode.
The input mode changes each time
this button is pressed.

Press this button to mute the sound,
press again to cancel the mute.

GUIDERECALL MUTETV/VIDEO

GUIDE button
for DBS.

Press to display the current system
status, for example, Aspect mode,
Channel number, Stereo mode, TV/
VIDEO and Off timer.

Operation of other Device

Buttons

Buttons

Device

VCR

CABLE/DBS

DVD

Buttons

Buttons

Device

VCR

CABLE/DBS

DVD

VCR REW/FF

Skip Search REW/FF

VCR RECORD

FFREW

-

REC

-

-

PLAY

PLAY

-

PLAY

ASPECT

TV/VCR

TV/VCR Switch
STB

-

ASPECT

Open / Close

Pause

-

Pause

VCR/DBS CH

VCR CH up/down

PAGE up/down

Slow +/

--

STOPPAU SE

STOP

-

STOP

11

12

VCR

DVD

1 2 3

4 5 6

7 8

0

9

RETURN
EXIT

R-TUNE

SLEEP

PROG

GUIDE

RECALL MUTE

SAP

POWER

CH

DBS/

CBL

TV

CH

VOL

TV/VIDEO

Menu Operations

2

or

Press to display MENU
screen.

An On Screen Help box is displayed when a menu is displayed
on the TV. This Help box indicates which keys on the remote control
are used to navigate the menu shown.

ON SCREEN HELP

‘Instruction’ box

1

MENU

ADJUST SET UP

LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST

MENU

ADJUST SET UP

LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST

MENU

ADJUST

PICTURE

AUDIO

SET UP

PICTURE ADJUST
POSITION / SIZE

AUDIO ADJUST

MENU

ADJUST

PICTURE

AUDIO

SET UP

PICTURE ADJUST
POSITION / SIZE

AUDIO ADJUST

MENU

ADJUST

PICTURE

AUDIO

SET UP

PICTURE ADJUST
POSITION / SIZE

AUDIO ADJUST

LANGUAGE

ENGLISH

LANGUAGE

RETURN

CHANGE

TV/VIDEO

Change the input mode.

• Press to display the Input
selection menu.

• Press corresponding
number key on the
remote control to select
the input of your choice.

Note:

Video input can also be
selected by pressing ,
then the CH

buttons,

and push

“OK” key.

1 TV
2 COMPONENT
3 VIDEO 1
4 VIDEO 2

TV/VIDEO

13

Menu Operations

(See page 21)

•

To return to the previous screen :

•

To exit the MENU screen: This returns TV to normal viewing.

Press to select the MENU screen (ADJUST or SET UP).

Press to select the sub-menu feature.

Press to display the sub-menu screen.

(See pages 15-18)

(See page 23)

Select the menu language.

(See page14)

(See page 19)

(See page 20)

(See page 19)

(See page 22)

OFF ON

COOLCOOL

NORMAL
PIC MODE
BACK LIGHT
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
AI PICTURE

+ 20
+ 20

0
0
0
0

OFF ON

STANDARD

PICTURE ADJUST PAGE 1/2

CH

CH

VOL VOL

O

K

RETURN
EXIT

MENU

LOCK

BLOCK PROGRAMS:

STATUS

U. S. MOVIES

CHANGE SETTING

ENTER CODE FIRST

OFF ON

AUDIO ADJUST

NORMAL

– 5
+ 3

0

STANDARD

PAGE 1/2

OFF ON

MODE
BASS
TREBLE
BALANCE
AI SOUND
SURROUND
STEREO SAP MONO

OFF ON

OFF ON

P O S IT ION / SI ZE

NORMAL

P O S IT ION

NORMALIZE
SIZE
15

RETURN

LANGUAGE

ENGLISH

LANGUAGE

ENGLISH FRANÇAIS

ESPAÑOL

MODE

AUTO PROGRAM

MANUAL PROGRAM

TV

CABLE

PROGRAM CHANNELS

COMPONENT
VIDEO1
VIDEO2

COMPONENT

VIDEO1
VIDEO2

INPUT LABEL

OTHER ADJUST PAGE 1/2

VIDEO NR

OFF ON

3D Y/C FILTER

COLOR MATRIX

SD HD

OFF ON

MPEG NR

OFF ON

CLOSED CAPTION

MODE

OFF

C1 C2

OFF