Panasonic TC-14LA1 User Manual

LCD TV
Operating Instructions
Model No.
TC-14LA1 TC-17LA1 TC-20LA1
or send e-mail to : consumerproducts@panasonic.com
or visit us at www.panasonic.com (U.S.A)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com (Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca (Canada)
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference.
English
TQBC0543

Important Safety Instructions

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrow head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.
Note to CATV System Installer: This reminder is provided to direct the CATV system installer’s
attention to Article 820–40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
Important Safety Instructions for LCD TV
1) Read these instructions and apply them with your LCD TV.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water. For example: Avoid placing it near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.
6) Clean only with dry cloth. Unplug this LCD TV from the wall outlet before cleaning. Do not use liquid or aerosol cleaners.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure reliable operation of the LCD TV and to protect it from overheating. These openings must not be blocked or covered. There should be at least 10 cm of space from these openings. The openings should never be blocked by placing the LCD TV on a bed, sofa, rug or other similar surface. This LCD TV should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Otherwise it may cause hazards.
10)
11) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer , or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
12) Unplug this apparatus during lightning storms or when unused for long periods of time. This will prevent damage to the receiver due to lightning and power-line surges.
13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Upon completion of any service or repairs to this LCD TV, ask the service technician to perform routine safety checks to determine that the television is in safe operating condition.
14) Operate only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home consult your television dealer or local power company.
15) Follow all warnings and instructions marked on the LCD TV.
16) Never push objects of any kind into this LCD TV through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the LCD TV .
2
Important Safety Instructions
17) If an outside antenna is connected to the television
equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. In the U.S. Selection 810-21 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
18) An outside antenna system should not be located in the vicinity of overhead power lines or other
EXAMPLE OF ANTENNA GROUNDING AS PER (NEC) NATIONAL ELECTRICAL CODE
GROUND CLAMP
ELECTRIC SERVICE EQUIPMENT
ANTENNA LEAD-IN WIRE
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
19) Unplug this LCD TV from the wall outlet, and refer servicing to qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the LCD TV. c. If the LCD TV has been exposed to rain or water. d. If the LCD TV does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore
the LCD TV to normal operation. e. If the LCD TV has been dropped or the cabinet has been damaged. f. When the LCD TV exhibits a distinct change in performance - this indicates a need for service.
20) When replacement parts are required, be sure the service technician to use replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
21) WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
22) CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED TO PREVENT BLADE EXPOSURE.
23) CAUTION: USE WITH OTHER STAND MAY RESULT IN INSTABILITY CAUSING POSSIBLE INJURY.
24) CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
NOTE: • This equipment is designed to operate in the U.S.A. and other countries where the broadcasting
system and AC house current is exactly the same as in the U.S.A.
The marking or retained image on the LCD panel resulting from fixed image use is not an operating
defect and as such is not covered by Warranty. This product is not designed to display fixed image patterns for extended periods of time.
Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed Image Displays.
The extended use of fixed image program material can cause a permanent "shadow image" on the LCD panel. This background image is viewable on normal programs in the form of a stationary fixed image. This type of irreversible LCD panel deterioration can be limited by observing the following steps: A. Reduce the brightness/contrast setting to a minimum viewing level. B. Do not display the fixed image for extended periods of time. C. Turn the power off when not in actual use.
This product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of mercury . Disposal of
these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance:
www.eiae.org.
3
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD TV. To obtain maximum benefit from your set, please read these instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt, and record the model number and serial number of your set in the space provided on the rear cover of these instructions.
or send e-mail to : consumerproducts@panasonic.com
or visit us at www.panasonic.com (U.S.A)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com (Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca (Canada)
Federal Communication Commission Information
This equipment has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause or receive interference, which can be determined by turning equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the TV antenna. Increase the separation between TV and other equipment. Connect TV into separate outlet from other equipment. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment.
4

Table of Contents

Important Safety Instructions .............................. 2
Table of Contents.................................................. 5
Installation ............................................................. 6
SUPPLIED ACCESSORIES ................................ 6
Remote control battery installation ...................... 7
Maintenance .......................................................... 7
Connections .......................................................... 8
Connecting the Antenna Cable to the Antenna Terminal ....
Antenna cover removal and fitting ....................... 8
Antenna / Cable Connection................................ 8
How to connect the input terminals ................... 10
Cable cover removal and fitting ......................... 12
Connecting Headphones / Earphones............... 12
Power ON / OFF................................................... 13
Connecting the Plug to the Wall Outlet.............. 13
How to Turn the Power On ................................ 13
Playing a VCR or other peripheral equipment ... 14
Basic Controls..................................................... 15
Flow Chart of MENU............................................16
Tuning channels
(Automatic channel programming) .................. 18
Tuning channels
(Manual channel programming)........................19
Picture Adjustments ........................................... 20
Audio Adjustments ............................................. 21
Lock Feature........................................................ 22
Closed Captions.................................................. 26
Customizing the VIDEO INPUT labels ............... 27
3D Y/C FILTER / COLOR MATRIX....................... 27
ASPECT Controls................................................ 28
Manual de instrucciones [ Resumen ]
Preparación ...................................................29
Instalación de las pilas del mando a distancia .....
Conexión del cable de antena al terminal
de entrada de RF............................................30
8
Conexión de antena / cable ............................30
Para quitar y colocar la cubierta del cable......30
Conexión de auriculares .................................30
Conexión/desconexión de la alimentación ....
Conexión de la clavija a la toma de corriente.....
Cómo conectar la alimentación ......................31
Reproducción en una videograbadora o en
otro equipo periférico ...................................32
Controles básicos.........................................33
Organigrama de menús de televisión.........34
Sintonización de canales
(Programación automática de canales).....36
Sintonización de canales
(Programación manual de canales) ............37
Ajuste el soporte con el ángulo deseado...38 Para quitar y colocar la cubierta de la antena ...
Troubleshooting.................................................. 39
Specifications...................................................... 40
29
31
31
38
5

Installation

Receiver Location
Locate for comfortable viewing. A void placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Optional External Equipment
The Video/Audio connection between components can be made with shielded video and audio cables. For best performance, Antenna cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronic supply store. Before you purchase any cables, be sure you know what type of output and input connectors your various components require. Also determine the length of cable youll need.
For optimum quality picture
When the LCD is exposed to light from outdoors or lighting fixtures, high-contrast pictures may not be displayed clearly. Turn off florescent lamps near the LCD and place in a location not exposed to outdoor light.
How to use the LCD stand
Adjust the stand to your desired angle. The stand angle can be adjusted between 5 ° forward to 15 ° back.

SUPPLIED ACCESSORIES

Check the accessories before installations.
Operating Instruction book
Tuner Cable Cover
Remote Control Transmitter
AC Adaptor & AC Cord
1 A
L 4 1
-
H T
Batteries for the Remote
Control Transmitter (2 × AA size)
Warranty Card
Service Center List
Customer Card
[
The illustration shows only a basic view; actual appearance may differ.]
6
Installation

Remote control battery installation

Replacing batteries
Replace batteries by following the steps below:
Requires two AA batteries.
1. Open the battery cover.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Observe the following precautions:
1. Always use new batteries when replacing the old set.
2. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
3. Battery replacement is necessary when remote control acts sporadically or stops operating this unit.
2. Install the batteries as shown in the battery compartment. (Polarity + or – must match the markings in the compartment).
Two AA size
3. Replace the cover.
Notes:
Do not drop, apply shock to or step on the remote control.
Do not spill water on the remote control.
Do not place objects between the remote control and remote control receiver.
Do not use remote controls for other equipment at the same time.
If the TV does not operate even when operating the remote control from a close range, it is time to
replace the batteries. Refer to the label on back of the remote control for directions on replacing batteries.

Maintenance

To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak detergent solution.
Use eyeglass cleaner to remove stubborn dirt from the LCD.
Never use alcohol, paint thinner or benzine to clean this unit.
Before using a chemically treated cloth, read the instructions that came
with the cloth carefully.
CAUTION :
If water or similar substances get inside the monitor via the liquid crystal panel surface, a malfunction may result.
Mild detergent
7

Connections

Connecting the Antenna Cable to the Antenna Terminal

Antenna Connection - For proper reception of VHF/UHF channels, an external antenna is required. For best
reception an outdoor antenna is recommended. Antenna Mode must be set to TV.
VHF Antenna
UHF Antenna
ANT
Mixer
75 Ohm Coaxial Cable
ANT
Antenna Terminal (ANT or VHF/UHF)
Coaxial Antenna Plug

Antenna cover removal and fitting

TC-14LA1/TC-17LA1
Removal
1
2
Fitting
1
2
Note:
To avoid interference appearing on the screen, do not bundle the antenna wire and AC adapter wire together.
1.Grasp the cover at the bottom end and initially remove by pulling slightly toward yourself.
2.Slowly pull out in the downward direction.
1.Insert the claws (at 4 points) at the top end.
2.Push the claws in (at 4 points) at the bottom end.
TC-20LA1
Removal
Fitting
1
1.
Grasp the opening and initially
pull the cover slightly towards yourself to disengage the
1
2
2
claws (at 2 points on both the left and right).
2.Slowly pull out in the downward direction.
1.Insert the claws (at 4 points) at the top end.
2.Push the claws in (at 4 points) at the bottom end.

Antenna / Cable Connection

Incoming 75 Ohm Cable from Home Antenna / Cable Company
F-Type Antenna Adapter (not supplied)
ANT (VHF/UHF)
on the Back of the TV
Cable Connection - For reception of cable channels (01 - 125) connect the cable supplied by your local cable company. Antenna Mode must be set to CABLE. (Refer to Antenna Mode section.)
Note:
Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable converter box is required for proper reception. Check with your local Cable company for its compatibility requirements.
8
Connections
Antenna Connection (Cable Box, no VCR)
Use this configuration when connecting the TV to a cable TV system using a Cable Box.
ANT
ANTENNA TERMINAL
CABLE BOX
ANT
(ANT or VHF/UHF) ON THE BACK OF
THE TV
OUTPUT INPUT
TERMINALS ON THE BACK OF
THE CABLE BOX
Connect the cable from the Output terminal on the back of the Cable Box to the ANTENNA terminal on the back of the TV.
Incoming Cable from Antenna or Cable TV System
Antenna Connection (Cable Box, and VCR)
Use this configuration when connecting the TV to a cable TV system using a Cable Box and VCR.
CABLE BOX
ANT
OUTPUT INPUT
TERMINALS ON THE BACK OF
THE CABLE BOX
ANT
ANTENNA TERMINAL
(ANT or VHF/UHF) ON THE BACK OF
THE TV
Connect the cable from the Output terminal on the back of the Cable Box to the Antenna Input terminal on
Connect the cable from the antenna or cable system to the Input terminal on the back of the CABLE BOX.
the back of the VCR.
VCR
Incoming Cable from Antenna or Cable TV System
TO VCR
Connect the cable from the Antenna Output terminal on the back of the VCR to the Antenna terminal (ANT or VHF/UHF) on the back of the TV.
ANT INPUT
ANT OUTPUT
S VIDEO
OUTPUT
VIDEO
L-AUDIO-R
Note: When the antenna cable is connected to the TV antenna terminal via a cable box or VCR, set the TV
channel to CH3 or CH4, cable. This does not apply when signal is input from VIDEO INPUT.
9
Connections

How to connect the input terminals

Connect VCR and other peripheral equipment
(DVD/STB)
VIDEO
Y
L
P
B
AUDIO
P
R
R
COMPORNENT VIDEO INPUT
S-VIDEO
S-VIDEO
VIDEO
VIDEO
L
L
AUDIO
AUDIO
R
R
1
2
INPUT
DC IN 15V
ANT
VIDEO
Y
L
P
B
AUDIO
R
P
R
COMPORNENT VIDEO INPUT
VIDEO
L
AUDIO
R
1
S-VIDEO
VIDEO
L
AUDIO
R 2
S-VIDEO
INPUT
Audio OUT
R
L
AUDIO
VIDEO
S-VIDEO cable
VIDEO
AUDIO
COMPONENT VIDEO OUT
PrPbY
Connect the S-VIDEO or VIDEO Terminal.
Audio
OUTRL
Video
OUT
S-Video
OUT
(Super-VHS VCR)
Notes:
(1) When a monaural VCR is used, connect the monaural audio cable to the AUDIO-L (Left) terminal. (2) Similar connections are available at the INPUT terminals.
Select the desired VIDEO input position by pushing the TV/VIDEO button. (See page 14)
(3) When connecting VCRs, priority is given to the S- Video cable when the S- Video input terminal and the
video input terminal are connected at the same time.
10
Connect CAMCORDER and VIDEO GAME CONSOLE
Connections
VIDEO
Y
L
P
B
AUDIO
P
R
R
COMPORNENT VIDEO INPUT
S-VIDEO
S-VIDEO
VIDEO
VIDEO
L
L
AUDIO
AUDIO
R
R
1
2
INPUT
DC IN 15V
ANT
VIDEO
Y
L
P
B
AUDIO
P
R
R
COMPORNENT VIDEO INPUT
S-VIDEO
S-VIDEO
VIDEO GAME CONSOLE
Audio
OUT
R
L
AUDIO
cable
COMPONENT VIDEO cable
COMPONENT VIDEO OUT
VIDEO
VIDEO
L
AUDIO
R 1
INPUT
L
AUDIO
R
2
VIDEO cable
AUDIO cable
CAMCORDER
Audio
OUTLR
Video
OUT
S-Video
OUT
VIDEO GAME CONSOLE
Notes:
S-VIDEO cable
When connecting video cables, priority is given to the S-Video cable when the S-Video input terminal
and the video input terminal are connected at the same time.
Please make inquiries to the VIDEO GAME PLAYER manufacture concerning component cables to
connect with video games.
11
Connections

Cable cover removal and fitting

Removal
1.Disengage the claws at the
2
1
Note:
Depending on the type of cable used it may not be possible to close the cover. In such cases the cable may be
routed through the antenna cover.
uppermost end.
2.Slowly pull out in the upward direction.
Fitting
1
2
1.Insert the claws (at 2 points) at the bottom.
2.Push in the TOP.

Connecting Headphones / Earphones

Connect headphones / earphones as follows.
DC IN 15V
ANT
(M3 plug)
Use Volume Up or Down button to control volume level. (See page 15)
12
(Optional)
Loading...
+ 28 hidden pages