panasonic TA Datasheet

Radial Lead Type

Aluminum Electrolytic Capacitors/ TA

Series:

TA

Typ e:

A

■ Features

Endurance: 125 °C 2000 h

●
Heat cycle: 1000 cycle –40 °C to +125 °C

●
RoHS directive compliant

●

■ Specifi cations

Category Temp. Range –40 °C to + 125 °C
Rated W.V. Range 10 V .DC to 63 V .DC
Nominal Cap. Range 1 µF to 4700 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)

tan

δ

Endurance

Shelf Life

W.V.(V ) 10 16 25 35 50 63

tan

δ

0.20 0.16 0.14 0.12 0.10 0.09

For capacitance value > 1000 µF , add 0.02 per every 1000 µF.

After following life test with DC voltage and +125 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), for 2000 hours,
when the capacitors are restored to 20 °C, the capacitors, shall meet the limits specifi ed below.

Capacitance change ±30% of initial measured value
tan

δ

300 % of initial specifi ed value

<

DC leakage current< initial specifi ed value

After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)

(120Hz / +20 °C)

■ Frequency correction factor for ripple current

W.V.

(V.DC)

10 to 63

Cap. (µF)

60 120 1 k 10 k 100 k

1 to 330 0.55 0.65 0.85 0.90 1.00

470 to 1000 0.70 0.75 0.90 0.95 1.00

2200 to 4700 0.75 0.80 0.90 0.95 1.00

Frequency (Hz)

■ Di men sions in mm (not to scale)

[mm]

Sleeve

Pressure relief

φd±0.05

+

–

✽L

✽ L<16:L±1.0

L>20:L±2.0

(φ16҂15, φ18҂15:L±1.5)

14 min.

Body Dia. φD81012.51618

Lead Dia. φd0.60.60.6 0.8 0.8

Lead space F 3.5 5.0 5.0 7.5 7.5

3 min.

φ8

φD±0.5

F±0.5

φ10<

φD±0.5

(mm)

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.

– EE111 –

Sep. 201000

Aluminum Electrolytic Capacitors/ TA

■ Standard Prod ucts

Case size Specifi cation Lead Length

W.V.

Cap.

(±20 %)

Dia. Length

Ripple

Current

(10 0 kHz)

(+125 °C)

(V) (µF) (mm) (mm)

(mA r.m.s.)

330 8 11.5 500 0.130 0.6 3.5 5.0

470 10 12.5 680 0.100 0.6 5.0 5.0

1000

10 20 110 0 0.057 0.6 5.0 5.0

12.5 15 1085 0.070 0.6 5.0 5.0

12.5 25 1750 0.033 0.6 5.0 5.0

10

2200

16 20 1985 0.032 0.8 7.5 7.5
18 15 1800 0.042 0.8 7.5 7.5

3300

4700

16 25 2300 0.024 0.8 7.5 7.5
18 20 2 250 0.031 0.8 7.5 7.5
16 31.5 2710 0.020 0.8 7.5

18 25 2470 0.022 0.8 7.5 7.5
220 8 11.5 500 0.13 0 0.6 3.5 5.0
330 10 12.5 680 0.100 0.6 5.0 5.0

10 16 945 0.075 0.6 5.0 5.0

12.5 12.5 86 5 0.105 0.6 5.0 5.0

12.5 2 0 14 90 0.042 0.6 5.0 5.0

16 15 1520 0.047 0.8 7.5 7.5

16 25 2300 0.024 0.8 7.5 7.5

18 20 2 250 0.031 0.8 7.5 7.5

16 31.5 2710 0.020 0.8 7.5

18 25 2470 0.022 0.8 7.5 7.5

16

470

1000

2200

3300

4700 18 31.5 3270 0.018 0.8 7.5

100 8 11.5 50 0 0.130 0.6 3.5 5.0
220 10 12.5 680 0.100 0.6 5.0 5.0
330 10 16 945 0.075 0.6 5.0 5.0

470

25

1000

10 20 110 0 0.057 0.6 5.0 5.0

12.5 15 1085 0.070 0.6 5.0 5.0

12.5 25 1750 0.033

16 20 1985 0.032 0.8 7.5 7.5

18 15 1800 0.042 0.8 7.5 7.5

2200

16 31.5 2710 0.020 0.8 7.5

18 25 2470 0.022 0.8 7.5 7.5

3300 18 35.5 3310 0.017 0.8 7.5

100 10 12.5 555 0.180 0.6 5.0 5.0
220 10 16 765 0.130 0.6 5.0 5.0
330 10 20 930 0.100 0.6 5.0 5.0

35

470

1000

12.5 2 0 13 30 0.070 0.6 5.0 5.0

16 15 1450 0.088 0.8 7.5 7.5

16 25 2010 0.037 0.8 7.5 7.5

18 20 218 0 0.046 0.8 7.5 7.5

2200 18 35.5 2790 0.025 0.8 7.5

Endurance : 125 °C 2000 h
When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm.
The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide.

Imped-

ance

(10 0 kHz)

(+20 ° C)

Lead

Dia.

Lead Space

Straight

Tap ing

✽

B

Part No.

(액)(mm)(mm) (mm) (pcs) (pcs)

EEUTA1A331( )
EEUTA1A471( )
EEUTA1A10 2( )
EEUTA1A10 2S( )
EEUTA1A222L( )
EEUTA1A222( )
EEUTA1A222S( )
EEUTA1A332( )
EEUTA1A332S ( )
EEUTA1A472
EEUTA1A472S( )
EEUTA1C221( )
EEUTA1C331( )
EEUTA1C471( )
EEUTA1C471S( )
EEUTA1C102( )
EEUTA1C102S( )
EEUTA1C222( )
EEUTA1C222S( )
EEUTA1C332
EEUTA1C332S( )
EEUTA1C472
EEUTA1E101( )
EEUTA1E221( )
EEUTA1E331( )
EEUTA1E471( )
EEUTA1E471S( )

0.6 5.0 5.0

EEUTA1E102L( )
EEUTA1E102( )
EEUTA1E102S( )
EEUTA1E222
EEUTA1E222S( )
EEUTA1E332
EEUTA1V101( )
EEUTA1V221( )
EEUTA1V331( )
EEUTA1V471( )
EEUTA1V471S( )
EEUTA1V102( )
EEUTA1V102S( )
EEUTA1V222

Min. Packaging Q'ty

Straight

Leads

Tap ing

200 1000
200 500
200 500
200 500
200 500
100 250
100 250
100 250
100 250
100
100 250
200 1000
200 500
200 500
200 500
200 500
100 250
100 250
100 250
100
100 250

50
200 1000
200 500
200 500
200 500
200 500
200 500
100 250
100 250
100
100 250

50
200 500
200 500
200 500
200 500
100 250
100 250
100 250

50

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.

– EE112 –

Sep. 201000

Aluminum Electrolytic Capacitors/ TA

■ Standard Prod ucts

Case size Specifi cation Lead Length

W.V.

Cap.

(±20 %)

Dia. Length

Ripple

Current

(10 0 kHz)

(+125 °C)

(V) (µF) (mm) (mm)

(mA r.m.s.)

1 8 11.5 352.00 0.6 3.5 5.0

2.2 8 11.5501.800.63.55.0

3.3 8 11.5 60 1.50 0.6 3.5 5.0

4.7 8 11.5 85 1.15 0.6 3.5 5.0
10 8 11.5 180 0.950 0.6 3.5 5.0
22 8 11.5 250 0.650 0.6 3.5 5.0
33 8 11.5 300 0.450 0.6 3.5 5.0
47 8 11.5 440 0.350 0.6 3.5 5.0

50

100 10 12.5 555 0.180 0.6 5.0 5.0
220 10 20 930 0.100 0.6 5.0 5.0

330

12.5 2 0 13 30 0.070 0.6 5.0 5.0
16 15 1450 0.088 0.8 7.5 7.5

12.5 25 16 50 0.055 0.6 5.0 5.0

470

16 20 1650 0.053 0.8 7.5 7.5
18 15 1710 0.075 0.8 7.5 7.5

1000

16 31.5 243 0 0.031 0.8 7.5

18 25 2350 0.032 0.8 7.5 7.5
22 8 11.5 310 0.470 0.6 3.5 5.0
33 10 12.5 410 0.360 0.6 5.0 5.0

10 16 460 0.270 0.6 5.0 5.0
47

12.5 12.5 65 0 0.24 0 0.6 5.0 5.0

100 10 20 680 0.205 0.6 5.0 5.0

63

220

12.5 25 1325 0.100 0.6 5.0 5.0

16 20 1360 0.085 0.8 7.5 7.5

18 15 1300 0.120 0.8 7.5 7.5

330

470

Endurance : 125 °C 2000 h
When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm.
The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide.

16 25 1660 0.070 0.8 7.5 7.5

18 20 1760 0.077 0.8 7.5 7.5

16 31.5 2055

18 25 199 0 0.060 0.8 7.5 7.5

Imped-

ance

(10 0 kHz)

(+20 ° C)

Lead

Dia.

Lead Space

Straight

Tap ing

✽

B

Part No.

(액)(mm)(mm) (mm) (pcs) (pcs)

EEUTA1H1R0( )
EEUTA1H2R2( )
EEUTA1H3R3 ( )
EEUTA1H4R7( )
EEUTA1H100( )
EEUTA1H220( )
EEUTA1H330( )
EEUTA1H470S( )
EEUTA1H101( )
EEUTA1H221( )
EEUTA1H331( )
EEUTA1H331S( )
EEUTA1H471L( )
EEUTA1H471( )
EEUTA1H471S( )
EEUTA1H102
EEUTA1H102S( )
EEUTA1J220( )
EEUTA1J330( )
EEUTA1J470( )
EEUTA1J470S( )
EEUTA1J101( )
EEUTA1J221L( )
EEUTA1J221( )
EEUTA1J221S( )
EEUTA1J331( )
EEUTA1J331S( )

0.060 0.8 7.5

EEUTA1J471
EEUTA1J471S( )

Min. Packaging Q'ty

Straight

Leads

Tap ing

200 1000
200 1000
200 1000
200 1000
200 1000
200 1000
200 1000
200 1000
200 500
200 500
200 500
100 250
200 500
100 250
100 250
100
100 250
200 1000
200 500
200 500
200 500
200 500
200 500
100 250
100 250
100 250
100 250
100
100 250

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.

– EE113 –

Sep. 201000