Panasonic SLVM525 User Manual
Specifications and Main Features
- Model Number: SL-VM525
- Type: Video CD Changer
- Audio Channels: 2, stereo, left–right.
- Frequency Response: 20Hz - 20kHz ± 1dB.
- Voltage: Output 2 volts at 0 dB.
- Dynamic Range: 92db.
- Sorrentino Signal Ratio: 100 dB.
- THD (Total Harmonic Distortion): 0.007 % - 1KHz - 0 dB.
- Wow and Flutter: Below measurable limit.
- DAC: MASH (1 bit).
- Output Impedance: 1 k ohm.
- Load Impedance: > 10k ohms.
- Video Output: 1.0 Vp-p; 75 Ohm.
- Pickup Wavelength: 780 nm.
- Electricity Supply: AC 60Hz; 120 V.
- Energy Usage: 14watts.
- Size: (WXHXD) 430 x 125 x 385 mm, 16 15/16 x 4 15/16 x 15 11/16 in.
- Weight: 4.7 kg, 10.4 lb.
- Functions: Karaoke function, multi-screen playback, frame skip, scene(s) playback & resume functions, random play, repeat function, program play.
Frequently Asked Questions
Q: SL-VM525 can play what type of CD?
A: Complying specifications standard Video CDs (both Version 1.1 and 2.0) CDs, Audio CDs and CD graphics can be played on SL-VM525.
Q: How many CDs does the changer accommodate?
A: Plasma SL-VM525 can use 5 CDs on its disc trays.
Q: Am I able to use my karaoke function with all the CD’s?
A: No. This is so because not all CD’s are actually made with the karaoke feature and only karaoke formatted CD’s are able to work with the karaoke function.
Q: What do I do if my CD is not playing on the changer?
A: First and foremost make sure that the label side of the CD is facing upwards, you can insert the CD in the drawer. If inserting the CD doesn’t help, check for any foreign objects in the loading drawer.
Q: What are the reasons for my video playback to be choppy?
A: There are multiple factors that can cause your video playback to be choppy, the connection cable for e,g could not be up to the required standard. Or even using a random disk with the player settings. A good example would be using a PAL video CD With an NTSC TV.
Q: Where and what settings do I need to change in order to alter the Video output type to NTSC or PAL?
A: In order to alter the video output setting, locate the unit’s VIDEO OUT SWITCH on the back, then turn the video CD player on. This will allow you to change the setting based on what system your television uses.
Q: Will I be able to delete my entered settings?
A: Yes you will. By clicking on the CLEAR button you will be able to delete certain individual tracks, or by going through all the entries pressing the PROGRAM button you will be provided with the means to erase everything during stop mode.
Q: What steps am I supposed to take If the remote control fails to function?
A: First and foremost, please inspect and confirm whether the batteries of the remote control are inserted correctly and charged. Secondly, ensure that there are no blockages between the unit’s sensor and the remote control.
User Manual
Loading...