Panasonic SLS221C User Manual

Reference Manual

Contents

®

Personal Computer

CF-71 Series

We recommend that this Reference Manual be printed.

Setup Utility

Running the Setup Utility

34

To run the Setup Utility, you
need to restart your computer.

NOTE

The Setup Utility will not be run if F1 is not pressed soon after the computer
restarts. In this case, you need to restart your computer again.

If is displayed, enter your password.
If both the [User Password] and [Supervisor Password] ha ve been set, after enter-

ing the User Password, [Supervisor Setup] and [Load Default Setting...] will not be
displayed on the main screen.

To display the [Supervisor Setup]:

1

Restart the computer and press F1 when [Press F1 for Setup] is displayed.

2

When is displayed, enter the Supervisor Password.

For more details, on-line help is available; press F1 .

Upon seeing
this message

Press F1 for Setup

press F1

<Main Screen>

Setup Utility

•System Setup

•Power Management

•Supervisor Setup

Return to the state existing at the time of

Save Settings
Restore Settings
Load Default Settings (PnP)
Load Default Settings (Non-PnP)

Exit Setup

NOTE

Setup Utility startup, or to the settings saved
with [Save Settings].

Set default settings.

• (PnP) is for operating system that is com-

patible with the Plug & Play.

• (Non-PnP) is for operating system that is

not compatible with the Plug & Play.

• When the Supervisor Password has been

set, input of the password is necessary.

Ke y Operations

Closing the Program

Select one of the items and press Enter .

Settings were changed.
Do you want to save them?

Yes, save and exit the Setup Utility.
No, exit the Setup Utility without saving.
No, return to the Setup Utility.

(The display may be different if no changes to the settings are made.)

F1 : To display the correspond-

ing “help” file.

Enter : To make a selection.
Esc : To display previous screen

(To exit the program at the
main screen).

Exit Setup

, :To move among the items.

:To move among the values

of each item.

F9 : To return to the setting be-

fore a change.

F10 : To set the default values.

NOTE

If the User Password has
been set, the password must
be entered before Windows
can start.

Setup Utility

System Setup

System Setup

NumLk [ON]
Touch Pad [Enable]
Speaker [Enable]
Display [External Monitor]

•User Password
Coffee break Password Disable
Key Combination for Coffee break Disable

35

Parameters

( : Default)

NumLk

Touch Pad

Speaker

Display

User Password
Coffee break Password*

Key Combination for Coffee
break**

ON
OFF

Enable
Disable

Enable
Disable

Internal LCD
External Monitor
Simultaneous

Enter displays the user password menu.
Enable

Disable
Alt + Ctrl + F9

Alt + Ctrl + F10
Alt + Ctrl + F11
Alt + Ctrl + F12

* Setting impossible when [User Password Protection] is set to [Enable].
** Setting impossible when the [Coffee break Password] is set to [Disable].

Setup Utility

Power Management

Power Management

Power Saving [Standard (Battery/AC Adapter)]

HDD Motor Timeout 1 min
ECO Mode Timeout 2 min

CD-ROM Drive Speed (Max) [24x speed]
Sleep Switch [Hibernation]

Suspend/Hibernation
Timeout [4 min]
Fn+F7/Fn+F10 [Enable]

Parameters

36

( : Default)

Power Saving

HDD Motor Timeout
ECO Mode Timeout

CD-ROM Drive Speed (Max)

Sleep Switch

Suspend/Hibernation Timeout

Fn+F7/Fn+F10

Advanced
Standard (Battery/AC Adapter)
Standard (Battery)
OFF

Automatically set through setting of Power Saving (1 min / Never)
Automatically set through setting of Power Saving (1 min / 2 min / Never)

12x speed
24x speed
Hibernation
Suspend
No Action
Never*
4 min
16 min
Enable
Disable

* Set automatically when [Sleep Switch] is set to [No Action].

Power Management Settings

Functions

Power Management

automatically set

HDD Motor Timeout
ECO Mode Timeout

Po w er Conservation
(AC Adapter Connected)

Advanced

1 min 1 min 1 min Never
1 min 2 min 2 min Never

Enable Enable Disable Disable

Standard (Battery/AC Adapter)

(Setting at the time of purchase)

Standard (Battery)

OFF

Setup Utility

Supervisor Setup

Supervisor Setup

Parallel Port (Address) [Automatic (PnP)]
Pa rallel Port Mode [Bidirectional]
Serial Port [Automatic (PnP)]
Sound Controller [Enable]

Sound Blaster Compatible I/O [Automatic (PnP)]
WSS CODEC I/O [Automatic (PnP)]
Sound IRQ-A [Automatic (PnP)]
Sound IRQ-B [Automatic (PnP)]
Sound DMA-A [Automatic (PnP)]

Sound DMA-B [Automatic (PnP)]
IrDA [Automatic (PnP)]
Floppy Operation [Enable]
Boot Up Drive [FDD HDD]

•Supervisor Password
User Password Protection [Disable]
Internal CardBus Controller [Enable]

37

Parameters

( : Default)
Depending on the item, the default value changes when (PnP) is selected and when (Non-PnP) is selected.

Parallel Port (Address)

Parallel Port Mode**

Serial Port

Sound Controller

Sound Blaster Compatible I/O

Automatic (PnP) PnP Selected
378 Non-PnP Selected
3BC
OFF

Bidirectional
Unidirectional
ECP

Automatic (PnP) PnP Selected
3F8 Non-PnP Selected
OFF

Enable
Disable

Automatic (PnP) PnP Selected
220 Non-PnP Selected
240
OFF*

WSS CODEC I/O

Automatic (PnP) PnP Selected
530 Non-PnP Selected
F40
OFF*

* Set automatically when [Sound Controller] is set to [Disable].
** Setting impossible when [Parallel Port (Address)] is set to [OFF].