Panasonic SAPT-570 Service manual

PSG0901003CE

DVD Home Theater Sound System

Model No. SA-PT570EB

SA-PT570EG SA-PT570EP

Product Color: (K)...Black Type

(S)...Silver Type (EG/EP)

Notes: This model’s DVD mechanism unit is DLS6. Please refer to the original service manual (Order No. MD0801003CE) for this mechanism

TABLE OF CONTENTS

PAGE PAGE

1 Safety Precautions----------------------------------------------- 3

1.1. GENERAL GUIDELINES--------------------------------3

1.2. Before Repair and Adjustment------------------------- 3

1.3. Protection Circuitry----------------------------------------3

1.4. Safety Parts Information--------------------------------- 4

1.5. Caution for AC Cord (For EB only)-------------------- 5

2 Warning-------------------------------------------------------------- 6

2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatic Sensitive (ES) Devices---------------6

2.2. Precaution of Laser Diode-------------------------------7

2.3. Service caution based on Legal restrictions --------8

2.4. Handling Precautions for Traverse Unit--------------9

3 Service Navigation --------------------------------------------- 11

3.1. Service Information-------------------------------------- 11

4 Specifications----------------------------------------------------12

5 Location of Controls and Components------------------15

5.1. Remote Control Key Button Operations------------15

5.2. Main Unit Key Button Operations --------------------16

5.3. Using the VIERA Link “HDAVI Control”-------------17

5.4. Using of iPod----------------------------------------------19

5.5. USB Connection and Operations --------------------21

5.6. Speaker Connection-------------------------------------22

5.7. Disc Information ------------------------------------------23

6 Self-Diagnosis and Special Mode Setting --------------25

6.1. Service Mode Summary Table------------------------25

6.2. Service Mode Table--------------------------------------25

6.3. Wireless Service Mode Summary Table -----------32

6.4. Service Mode Table (Wireless)-----------------------32

6.5. DVD Self Diagnostic Function-Error Code---------34

6.6. Sales Demonstration Lock Function ----------------38

6.7. Firmware Version-Up Information--------------------39

7 Troubleshooting Guide----------------------------------------41

7.1. Troubleshooting Guide for F61 and/or F76-------- 41

7.2. Basic Troubleshooting Guide for Traverse Unit (DVD Module P.C.B.)------------------------------48

8 Service Fixture & Tools---------------------------------------49

8.1. Service Tools and Equipment-------------------------49

9 Disassembly and Assembly Instructions---------------50

9.1. Disassembly Flow Chart--------------------------------51

9.2. Main Components and P.C.B. Locations-----------52

9.3. Disassembly of Top Cabinet---------------------------53

9.4. Disassembly of Rear Panel----------------------------53

9.5. Disassembly of DVD Mechanism Unit (DLS6)---- 53

9.6. Disassembly of Front Panel Assembly -------------54

9.7. Disassembly of Panel, Power Button P.C.B.------55

9.8. Disassembly of Auto Setup Speaker P.C.B.-------56

9.9. Disassembly of DVD Lid--------------------------------56

9.10. Disassembly of iPod P.C.B.----------------------------57

9.11. Disassembly of AC Inlet P.C.B.-----------------------58

9.12. Disassembly of Main P.C.B. ---------------------------59

9.13. Disassembly of Co-processor P.C.B.----------------60

9.14. Disassembly of D-Amp P.C.B. ------------------------60

9.15. Replacement of Audio Digital Power Amp IC (IC5000) ----------------------------------------------------61

9.16. Replacement of Audio Digital Power Amp IC (IC5200) ----------------------------------------------------63

9.17. Replacement of Audio Digital Power Amp IC (IC5300) ----------------------------------------------------64

9.18. Replacement of Audio Digital Power Amp IC (IC5400) ----------------------------------------------------65

9.19. Disassembly of SMPS P.C.B. -------------------------66

9.20. Replacement of Switching Regulator IC (IC2903) ----------------------------------------------------68

9.21. Replacement of Switching Regulator IC (IC5701) ----------------------------------------------------69

9.22. Replacement of Rectifier Diode (D5702)-----------69

9.23. Replacement of Regulator Diode (D5801)---------71

9.24. Replacement of Regulator Diode (D5802)---------71

9.25. Replacement of Regulator Diode (D5803)---------72

9.26. Disassembly of DVD Module P.C.B.-----------------73

9.27. Disassembly of Scart P.C.B.---------------------------74

9.28. Disassembly of Wireless Adapter P.C.B.-----------74

9.29. Assembling and Disassembling of Traverse Unit-----------------------------------------------------------75

10 Service Position-------------------------------------------------78

10.1. Checking & Servicing Main P.C.B.-------------------78

10.2. Checking & Servicing D-Amp P.C.B.---------------- 78

10.3. Checking & Servicing SMPS & AC Inlet P.C.B. -- 81

10.4. Checking & Servicing DVD Module P.C.B.-------- 83

11 Voltage & Waveform Chart ---------------------------------- 86

1 1.1. Voltage Table --------------------------------------------- 86 1 1.2. Waveform Chart------------------------------------------ 96

12 Illustration of ICs, Transistor and Diode---------------101 13 Overall Simplified Block Diagram------------------------102 14 Block Diagram--------------------------------------------------103

14.1. System Control -----------------------------------------103

14.2. DVD (SERVO)-------------------------------------------104

14.3. DVD (Audio)----------------------------------------------105

14.4. DVD (HDMI)----------------------------------------------106

14.5. Video-------------------------------------------------------107

14.6. Audio-------------------------------------------------------108

14.7. Digital Audio Amp---------------------------------------109

14.8. Power------------------------------------------------------110

15 Wiring Connection Diagram ------------------------------- 111 16 Schematic Diagram Notes----------------------------------112 17 Schematic Diagram-------------------------------------------114

17.1. DVD Module (DV5U) Circuit -------------------------114

17.2. Main Circuit-----------------------------------------------119

17.3. Panel Circuit ---------------------------------------------123

17.4. Auto Setup Speaker & Power Button Circuit-----124

17.5. D-Amp Circuit--------------------------------------------125

17.6. SMPS Circuit---------------------------------------------127

17.7. AC Inlet, iPod & Wireless Adapter Circuit--------129

17.8. Scart Circuit----------------------------------------------130

17.9. Co-processor Circuit (For reference only)--------131

18 Printed Circuit Board-----------------------------------------132

18.1. DVD Module P.C.B. ------------------------------------132

18.2. Main P.C.B.-----------------------------------------------133

18.3. Panel, Auto Setup Speaker, Power Button & AC Inlet P.C.B.-------------------------------------------134

18.4. D-Amp P.C.B.--------------------------------------------135

18.5. SMPS P.C.B.---------------------------------------------136

18.6. iPod, Scart, Wireless Adapter & Co-processor P.C.B. (For reference only)---------------------------137

19 Terminal Function of ICs------------------------------------138

19.1. IC2001 (RFKWMPT470EB): IC System Control-----------------------------------------------------138

19.2. IC6901(C0HBB0000057): IC FL Driver-----------139

20 Exploded View and Replacement Parts List----------140

20.1. Exploded View and Mechanical replacement Part List ---------------------------------------------------140

20.2. Electrical Replacement Part List--------------------144

1 Safety Precautions

1.1. GENERAL GUIDELINES

1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit.

2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.

3. After servicing, carry out the following leakage current checks to prevent the customer from being exposed to shock hazards.

1.1.1. LEAKAGE CURRENT COLD CHECK

1. Unplug the AC cord and connect a jumper between the two prongs on the plug.

2. Measure the resistance value, with an ohmmeter, between the jumpered AC plug and each exposed metallic cabinet part on the equipment such as screwheads, connectors, control shafts, etc. When the exposed metallic part has a return path to the chassis, the reading should be between 1MΩ and 5.2MΩ. When the exposed metal does not have a return path to the chassis, the reading must be

1.1.2. LEAKAGE CURRENT HOT CHECK

1. Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check.

2. Connect a 1.5kΩ, 10 watts resistor, in parallel with a 0.15µF capacitors, between each exposed metallic part on the set and a good earth ground such as a water pipe, as shown in Figure 1.

3. Use an AC voltmeter, with 1000 ohms/volt or more sensitivity, to measure the pote ntial across the resistor.

4. Check each exposed metallic part, and measure the voltage at each point.

5. Reverse the AC plug in the AC outlet and repeat each of the above measurements.

6. The potential at any point should not exceed 0.75 volts RMS. A leakage current tester (Simpson Model 229 or equiva lent) may be used to make the hot checks, leakage current must not exceed 1/2 milliamp. In case a measurement is outside of the limits specified, there is a possibility of a shock hazard, and the equipment should be repaired and rechecked before it is returned to the customer.

Figure 1

1.2. Before Repair and Adjustment

Disconnect AC power to discharge unit AC Capacitors as such (C5700, C5701, C5703, C5704, C5705, C5712) through a 10 Ω, 10 W resistor to ground.

Caution:

DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices. After repairs are completed, restore power gradually using a variac, to avoid overcurrent. Current consumption at AC 230~240 V, 50 Hz in NO SIGNAL mode volume minimal should be ~ 600 mA. (EB)

Current consumption at AC 230 V, 50 Hz in NO SIGNAL mode volume minimal should be ~ 600 mA. (EG/EP)

1.3. Protection Circuitry

The protection circuitry may have operated if either of the following conditions are noticed:

• No sound is heard when the power is turned on.

• Sound stops during a performance. The function of this circuitry is to prevent circuitry damage if, for example, the positive and negative speaker connection wires are “shorted”, or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used. If this occurs, follow the procedure outlines below:

1. Turn off the power.

2. Determine the cause of the problem and correct it.

3. Turn on the power once again after one minute.

Note:

When the protection circuitry functions, the unit will not operate unless the power is first turned off and then on again.

1.4. Safety Parts Information

Safety Parts List:

There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Exploded View & Replacement Parts List. It is essential that these

critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards. Do not modify the original design without permission of manufacturer.

Safety Ref. No. Part No. Part Name & Description Remarks

23 RGRX0071E-A1 REAR PANEL 37 RKMX0141-S3 TOP CABINET EG/EP-S 37 RKMX0141-1K3 TOP CABINET EB/EG/

EP-K

65 REXX0728 BLK WIRE (SMPS-AC) 66 REXX0730 RED WIRE (SMPS-AC) A2 K2CQ2CA00007 AC CORD EG/EP-S A2 K2CZ3YY00005 AC CORD EB-K 401 RD-DDTX001-V TRAVERSE ASS’Y (RTL) PCB6 REPX0689G D-AMP P.C.B (RTL) PCB7 REPX0728K SMPS P.C.B (RTL) PCB8 REPX0728K AC INLET P.C.B (RTL) DZ5701 ERZV10V511CS DIODE L5701 ELF15N035AN LINE FILTER L5702 ELF21N015A LINE FILTER L5703 ELF21N015A LINE FILTER T2900 G4D1A0000117 SWITCHING TRANSFORMER T5701 ETS42BN1A6AD SWITCHING TRANSFORMER T5751 ETS19AB2A6AG SWITCHING TRANSFORMER PC5702 B3PBA0000402 PHOTO COUPLER PC5720 B3PBA0000402 PHOTO COUPLER PC5799 B3PBA0000402 PHOTO COUPLER RY5701 K6B1AEA00003 RELAY F1 K5D402BK0007 FUSE F2 K5G162B00016 FUSE FP2901 K5H1022A0011 FUSE PROTECTOR FP2902 K5H2022A0011 FUSE PROTECTOR TH5702 D4CAA5R10001 POWER THERMISTOR P5701 K2AA2B000017 AC INLET C5700 F1BAF1020020 1000pF C5701 ECQU2A104MLC 0.1uF C5702 ECQU2A104MLC 0.1uF C5703 ECQU2A104MLC 0.1uF C5704 F1BAF1020020 1000pF C5705 F1BAF1020020 1000pF

1.5. Caution for AC Cord (For EB only)

For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer.

CAUTION!

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET.

If a new plug is to be fitted please observe the wiring code as stated below. If in any doubt please consult a qualified electrician.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral, Brown: Live. As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue . The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloure d Brown or Red.

WARNING: DO NO T CONNECT EITHER WIRE T O THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN/YELLOW.

THIS PLUG IS NOT WATERPROOF KEEP DRY. Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the A C mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

Figure A Figure B

A A

Fuse cover

2. Replace the fuse and close or attach the fuse cover.

Figure A Figure B

Fuse (5 ampere)

2Warning

2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatic Sensitive (ES) Devices

Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip” components. The following techniques should be used to help reduce the incid ence of component damage caused by electrostatic discharge (ESD).

1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap, which should be removed for potential shock reasons prior to applying power to the unit under test.

2. After removing an electrical assembly equipped with ES devices, place the assembly on a cond uctive surface su ch as a luminum foil, to prevent electrostatic charge build up or exposure of the assembly.

3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.

4. Use only an anti-static solder removal device. Some solder removal devices not classified as “anti-static (ESD protected)” can generate electrical charge sufficient to damage ES devices.

5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices.

6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material).

7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed.

Caution:

Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.

8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) suf-

ficient to damage an ES device).

2.2. Precaution of Laser Diode

Caution:

This product utilizes a laser diode with the unit turned “on”, invisible laser radiation is emitted from the pickup lens. Wavelength: 655 nm (DVD)/785 nm (CD) Maximum output radiation power from pickup: 100 µW/VDE Laser radiation from the pickup unit is safety level, but be sure the followings:

1. Do not disassemble the pickup unit, since radiation from exposed laser diode is dangerous.

2. Do not adjust the variable resistor on the pickup unit. It was already adjusted.

3. Do not look at the focus lens using optical instruments.

4. Recommend not to look at pickup lens for a long time.

ACHTUNG:

Dieses Produkt enthält eine Laserdiode. Im eingeschalteten Zustand wird unsichtbare Laserstrahlung von der Lasereinheit adgestrahit. Wellenlänge: 655 nm (DVD)/785 nm (CD) Maximale Strahlungsleistung der Lasereinhelt: 100 µW/VDE Die strahlungan der Lasereinheit ist ungefährlich, wenn folgende Punkte beachtet werden:

1. Die Lasereinheit nicht zerlegen, da die Strahlung an der freigelegten Laserdiode gefährlich ist.

2. Den werksseitig justierten Einstellregler der Lasereinheit nicht verstellen.

3. Nicht mit optischen Instrumenten in die Fokussierlinse blicken.

4. Nicht über längere Zeit in die Fokussierlinse blicken.

2.3. Service caution based on Legal restrictions

2.3.1. General description about Lead Free Solder (PbF)

The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards us ed for this equipment in considering the globally environmental conservation.

The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin (Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30 degrees C (86°F) more than that of the normal solder.

Definition of PCB Lead Free Solder being used

The letter of “PbF” is printed either foil side or components side on the PCB using the lead free solder.

(See right figure)

Service caution for repair work using Lead Free Solder (PbF)

• The lead free solder has to be used when repairing the equipment for which the lead free solder is used. (Definition: The letter of “PbF” is printed on the PCB using the lead free solder.)

• To put lead free solder, it should be well molten and mixed with the original lead free solder.

• Remove the remaining lead free solder on the PCB cleanly for soldering of the new IC.

• Since the melting point of the lead free solder is higher th an that of the normal lead solder, it takes the longer time to melt the lead free solder.

• Use the soldering iron (more than 70W) equi pped with th e temperature contro l after setting the temp erature at 350±30 degrees C (662±86°F).

Recommended Lead Free Solder (Service Parts Route.)

• The following 3 types of lead free solder are available through the service parts route. RFKZ03D01K-----------(0.3mm 100g Reel) RFKZ06D01K-----------(0.6mm 100g Reel) RFKZ10D01K-----------(1.0mm 100g Reel)

Note

* Ingredient: tin (Sn), 96.5%, silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germanium (Ge) 0.1 to 0.3%

2.4. Handling Precautions for Traverse Unit

The laser diode in the optical pickup unit may break down du e to static electricity of clothes or human body. Special care must be taken avoid caution to electrostatic breakdown when servicing and handling the laser diode in the traverse unit.

2.4.1. Cautions to Be Taken in Handling the Optical Pickup Unit

The laser diode in the optical pickup unit ma y be damaged due to electrostatic discharge genera ting from clothes or human body. Special care must be taken avoid caution to electrostatic discharge damage when servicing the laser diode.

1. Do not give a considerable shock to the optical pickup unit as it has an extremely high-precise structure.

2. To prevent the laser diode from the electrostatic discharge damage, the flexible cable of the optical pickup unit removed should be short-circuited with a short pin or a clip.

3. The flexible cable may be cut off if an excessive force is applied to it. Use caution when handling the flexible cable.

4. The antistatic FPC is connected to the new optical pickup unit. After replacing the optical pickup unit and connecting the flexible cable, cut off the antistatic FPC.

Figure 1

2.4.2. Grounding for electrostatic breakdown prevention

Some devices such as the DVD player use the optical pickup (laser diode) and the optical pickup will be damaged by static electricity in the working environment. Proceed servicing works under the working environment where grounding works is completed.

2.4.2.1. Worktable grounding

1. Put a conductive material (sheet) or iron sheet on the area where the optical pickup is placed, and ground the sheet.

2.4.2.2. Human body grounding

1. Use the anti-static wrist strap to discharge the static electricity form your body.

Figure 2

3 Service Navigation

3.1. Service Information

This service manual contains technical information which will allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers.

If the circuit is changed or modified, this information wil l be followed b y supplement se rvice manual to be fil ed with origin al se rvice manual.

• DVD Mechanism Unit (DLS6):

1) This model uses DVD mechanism unit (DLS6).

2) This service manual does not contain the following information on DLS6 * Schematic Diagram, Block Diagram and P.C.B. layout of DLS6 P.C.B. * Parts List for individual parts of DVD mechanism unit (DLS6). * Exploded View and Part List for individual parts of DVD mechanism unit (DLS6). Please refer to original service manual (Order No. MD0801003CE)

• Printed Circuit boards:

The following category are supplied as an assembled module.

• DVD Module P.C.B. (RFKBX0681A-M)

• Co-Processor P.C.B. (RFKBX0719A)

• Micro-processor & EEPROM IC:

1) The following components are supplied as an assembled part.

• Micro-processor IC, IC2001 (RFKWMPT470EB).

• EEPROM IC, IC2003 (RFKWEPT470EB).

• Speaker system

1) For information, please refer to original service manual, SB-PT570EG-K/S (Order No. PSG0901004CE).

• Wireless system

1) This model supports to wireless surround speakers (SH-FX70E/EE-K).

2) For information of wireless system, please refer to original Service Manual, (Order No. PSG0902024CE).

4 Specifications

Main unit SA-PT570EB/EG/EP

OGENERAL

Power supply: AC 230 to 240V, 50 Hz Power consumption: This unit 130 W Power consumption in standby mode:

approx. 0.2 W

Dimensions (W××××H××××D): 430 mm×63 mm×327 mm Mass: This unit 3.4 kg Operating temperature range: 0 °C to +40 °C Operating humidity range: 35% to 80% RH

(no condensation)

OAMPLIFIER SECTION

RMS Output Power: Dolby Digital Mode

Front Ch:

125 W per channel (3 Ω), 1 kHz, 10% THD

Surround Ch:

125 W per channel (3 Ω), 1 kHz, 10% THD

Center Ch:

250 W per channel (6 Ω), 1 kHz, 10% THD

Subwoofer Ch:

250 W per channel (6 Ω), 100 Hz, 10% THD

Total RMS Dolby Digital mode power:

1000 W

DIN Output Power: Dolby Digital Mode

Front Ch:

90 W per channel (3 Ω), 1 kHz, 1% THD

Surround Ch:

90 W per channel (3 Ω), 1 kHz, 1% THD

Center Ch:

115 W per channel (6 Ω), 1 kHz, 1% THD

Subwoofer Ch:

115 W per channel (6 Ω), 100 Hz, 1% THD

Total DIN Dolby Digital mode power:

590 W

OTUNER, TERMINALS SECTION

Preset Memory: FM 30 stations Frequency Modulation (FM)

Frequency range:

87.50-108.00 MHz (50-kHz step)

Antenna terminals: 75 Ω (unbalanced)

Digital audio input

Optical digital input: Optical terminal Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

Phone jack

Terminal: Stereo, 3.5 mm jack

Calibration Mic

Sensitivity: 100 mV, 1.4 kΩ Terminal: Mono, 3.5mm jack

USB Port

USB standard: USB 2.0 full speed Media file format support: MP3 (*.mp3)

WMA (*.wma)

JPEG (*.jpg) (*.jpeg)

DivX (*.divx) (*.avi)

MPEG4 (*.asf) USB device file system: FAT12, FAT16, FAT32 USB Port power: Max. 500 mA Bit rate: Up to 4Mbps (Divx)

ODISC SECTION

Discs played [8 cm or 12 cm]:

(1)

DVD (DVD-Video, DivX

(2)

DVD-RAM (DVD-VR, MP3

*5, 6

DivX

)

*5, 6

)

*2, 5

, JPEG

*4, 5

, MPEG4

*5, 7

(3)

DVD-R (DVD-Video, DVD-VR, MP3

*5, 6

, DivX

)

*2, 5

, JPEG

*4, 5

, MPEG4

*5,

(4) DVD-R DL (DVD-Video, DVD-VR) (5)

DVD-RW (DVD-Video, DVD-VR, MP3 MPEG4

*5, 7

, DivX

*5, 6

)

*2, 5

, JPEG

*4, 5

(6) +R/+RW (Video) (7) +R DL (Video) (8)

CD, CD-R/RW [CD-DA, Video CD, SVCD

*4, 5

, JPEG

Conforming to IEC62107

MPEG-1 Layer 3, MPEG-2 Layer 3

Windows Media Audio Ver.9.0 L3

, MPEG4

*5, 7

, DivX

*5, 6

*2, 5

, MP3

]

, WMA

*3,

ONot compatible with Multiple Bit Rate (MBR)

Exif Ver 2.1 JPEG Baseline files OPicture resolution: between 160 x 120 and 6144 x 4096 pix-

els (Sub sampling is 4:0:0, 4:2:0, 4:2:2 or 4:4:4). Extremely long and narrow pictures may not be displayed.

The total combined maximum number of recognizable audio, picture and video contents and groups: 4000 audio, picture and video contents and 255 groups. (Excluding Root Folder)

Plays all versions of DivX® video (including DivX®6) with standard playback of DivX® media files. Certified to the DivX

Home Theater Profile.

*7 MPEG4 data recorded with the Panasonic SD multi cameras

or DVD video recorders. OConforming to SD VIDEO specifications (ASF standard)/ MPEG4 (Simple Profile) video system/G.726 audio system.

Pick up

Wavelength (DVD/CD): 655/785 nm Laser power (DVD/CD): CLASS 1/CLASS 1M

Audio output (Disc)

Number of channels: 5.1 ch (FL, FR, C, SL, SR, SW)

OVIDEO SECTION

Video system: PAL625/50, PAL525/60, NTSC Composite video output

Output level: 1 Vp-p (75 Ω) Terminal: Scart jack (1 system)

S-video output

Y output level: 1 Vp-p (75 Ω) C output level: PAL; 0.3 Vp-p (75 Ω)

NTSC; 0.286 Vp-p (75 Ω)

Terminal: Scart jack (1 system)

Component video output

Y output level: 1 Vp-p (75 Ω)

output level: 0.7 Vp-p (75 Ω)

Terminal: Pin jack (Y: green, P

red) (1 system)

: blue,

RGB video output

R output level: 0.7 Vp-p (75 Ω) G output level: 0.7 Vp-p (75 Ω) B output level: 0.7 Vp-p (75 Ω) Terminal: Scart jack (1 system)

HDMI AV output

Terminal: 19pin type A connector

HDAVI Control:

This unit supports “HDAVI Control 4” function.

Note:

1. Specifications are subject to change without notice. Mass and dimensions are approximate.

2. Total harmonic distortion is measured by the digital spectrum analyzer.

Solder:

This model uses lead free solder (PbF).

Refer to their respective original service manuals for *1,*2.

5 Location of Controls and Components

5.1. Remote Control Key Button Operations

Turn the main unit on/off

Select the play mode

Select channels and title numbers etc. / Enter numbers

Set the repeat mode

Basic operations for play

Select preset radio stations

Select surround sound effects

Show a disc top menu or program list

Select or confirm menu items / Frame-by-frame Show a disc menu or play list

10 11

Show setup menu or select speaker channel

Turn Whisper-mode Surround on/off

TV operations

Aim the remote control at the Panasonic TV and press the button.

: Turn the TV on/off

[] [TV/AV]: Change the TV s video input mode [, ]:

Adjust the TV volume

This may not work properly with some models.

Adjust the volume of the main unit

Mute the sound

MUTE flashes on the main units display while the function is on.

To cancel, press the button again or adjust the volume.

Muting is cancelled when you switch the unit to standby.

Source select

[DVD]: Select disc as the source [USB], [iPod]: Select USB or iPod as the source [RADIO], [EXT-IN]: Select FM tuner or external audio as the source FM X*AM AU D-IN*

1 2

9 10 11

PLAYMODE

1 2 3 4 5 6 7 809

REPEAT

DVD

SKIP

SURROUND

PLAY LIST

SETUP

W.SRD

CH SELECT

USB

iPod

SLOW

PLAY

PAUSE

STOP

FL DISPLAY

SLEEP

VOL

MUTE

RADIO EXT-IN

SKIP

SOUND

RETURN

CANCEL

15 16

18 19

21 22

(TV) is displayed next to items set for the TV sound input.

Select radio stations manually

Select sound mode

Show START menu

Show on-screen menu / Display RDS text data

Return to previous screen

Cancel

Switch information on the main unit s display or

Set the Sleep timer

Press and hold [-SLEEP]. While the time is shown on this unit’s display, press the [-SLEEP] repeatedly. SLEEP 30 SLEEP 60 SLEEP 90 SLEEP120

OFF (Cancel) To con firm the remaining time, press and hold the button again.

5.2. Main Unit Key Button Operations

Pull open

OPEN CLOSE

Standby/on switch [ ]

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

Open/Close the disc tray2 Show the smart setup guide

Stop playing / Select the tuning mode / Adjust the

FM reception condition Play discs / Memorize the receiving radio stations5

Connect iPod Connect Auto speaker setup microphone

Connect USB device

Remote control signal sensor

3 4 5

Dock for iP od

MULTI CH

PROCESSING

SELECTORSETUP MIC

118 9

SMART SETUP

TUNE

TUNE MODE FM MODE

The indicator lights when the surround sound is enhanced by surround features

Select the source

DVD/CD USB FM

(TV) is displayed next to items set for the TV

sound input.

Display

Skip or slow-search play / Select the radio stations

Adjust the volume of the main unit

14 15

Connect headphones (not included)

Headphone plug type: 3.5 mm stereo mini plug

Reduce the volume before connecting. Audio is automatically switched to 2-channel

stereo.

To prevent hearing damage, avoid listening for

prolonged periods of time.

Excessive sound pressure from earphones and headphones can cause hearing loss.

AM AUX* D-IN* IPOD

MEMORY

VOLUME

14 15

5.3. Using the VIERA Link “HDAVI Control”

Auto lip sync

(Availablew hen using VIER A Link “H D AVIC o n trol”with “HDAVIControl3 (orlater)”com patibleTV)

This function automatically provides synchronised audio and video output. (This works only when the source is DVD/CD , USB , AUX or

D-IN .)

When using DVD/CD or USB as the source, set TIME DELAY in VIDEO menu to 0 ms/AUTO

RADIO EXT-IN

SKIP

SETUP

VIERA Link "HDAVI Control"

VIERA Link HDAVI Control is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) under HDAVI Control . You can use this function by connecting the equipment with the HDMI cable. See the operating instructions for connected equipment for operational details.

VIERA Link HDAVI Contro l , based on the control func tio ns provi ded by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers equipment that supports HDMI CEC cannot be guaranteed. This unit supports HDAVI C ontro l 4 function.

HDAVI Control 4 is the newest standard (current as of December,

2008) for Panasonic s HDAVI Control compatible equipment. This standard is compatible with Panasonics conventional HDAVI equipment. Please refer to individual manuals for other manufacturers equipment supporting VIERA Link function.

The TV with HDAVI Control 2 (or later) function enables the following operation: VIERA Link Control only with TVs remote control [for

HDAVIControl 2 (or later)]

Preparation

Confirm that the HDMI connection has been made . Set VIERA Link to ON . To complete and activate the connection correctly, turn on all VIERA Link HDAVI Control compatible equipment and set the TV to the corresponding HDMI input mode for this unit.

Setting the TV audio for VIERA Link "HDAVI Control"

Select between AUX and D-IN to work with the linked operations. Confirm the audio connection to the AUX terminal (for AUX ) or OPTICAL IN terminal (for D-IN )

1 Press [RADIO/EXT-IN] to select AUX or D-IN . 2 Press and hold [SETUP] to select TV AUDIO , then press

to switch AUX or D-IN .

Whenever the connection or settings are changed, reconfirm the points above.

AUX or D-IN ( DIGITAL IN ) works depending on the TV AUDIO setting ( Control ).

above, Setting the TV audio for VIERA Link HDAVI

PLAY

SKIP

SETUP

RADIO/EXT-IN

PLAY

One touch play

You can turn on this unit and the TV, and start playing the disc with a single press of a button.

Start disc playback

PLAY

This unit s speakers will be automatically activated

Note

Playback may not be immediately displayed on the TV. If you miss the beginning portion of playback, press [ ] or [ ] to go back to where playback started.

Auto input switching

When you switch the TV input to TV tuner mode, this unit will automatically switch to AUX* or D-IN*. (For IPOD mode, this works only in iPod music mode, or when iPod is not connected.) When this unit is in DVD/CD mode, the TV will automatically switch its input mode for this unit. When playback stops ( will automatically return to TV tuner mode. When you select START menu , the TV will automatically switch to TV tuner mode.

DVD-V

or DIGITAL IN* from Input Selection in

AUX

) or when this unit turns of f, the TV

VCD

Power off link

When the TV is turned off, this unit goes into standby mode automatically. To continue audio playback even when the TV is turned off, select

VIDEO .

When the TV is turned on, this unit does not turn on automatically. (Power on link is not available.)

Note

When you press [ ], only this unit turns off. Other connected equipment compatible with VIERA Link HDAVI Control stays on.

Speaker control VIERA Link Control only with TVs remote control

You can select whether audio is output from this unit s speakers or the TV speakers by using the TV menu settings. For details, refer to the operating instructions of your TV.

Home Cinema

This unit s speakers are active.

When this unit is in standby mode, changing the TV speakers to this units speakers in the TV menu will automatically turn this unit on and select AUX* or D-IN*as the source. The TV speakers are automatically m uted. You can control the volume setting using the volume or mute button on the TV s remote control. (The volume level is displayed on the main units display.) To cancel muting, you can also use this units remote control. If you turn off this unit, TV speakers will be automatically activated.

TV speakers are active.

The volume of this unit is set to 0 .

This function works only when DVD/CD , USB , AUX selected as the source on this unit.

or D-IN*is

Audio output is 2-channel audio.

When switching between this unit speakers and TV speakers, the TV screen may be blank for several seconds.

[for HDAVI Control 2 (or later) ]

Y ou can control the playback menus of this unit with the TVs remote control. When operating the TVs remote control, refer to the below illustration for operation buttons.

1 Select this unit s ope ra tion me nu by using the TV menu setting s.

(For details, refer to the operating instructions of your TV.) The START menu will be shown. e.g.

DVD-V

DVD/CD Home Cinema

Playback Disc

TOP MENU (DVD) MENU (DVD)

Input Selection

Sound

OK RETURN

The START menu can also be shown by using a button on the TV s remote control (e.g. [OPTION]).

When DVD/CD or USB is selected as the source, this works only during stop mode. This does not work while iPod music playback screen is displayed on the TV.

2 Select the desired item on the START menu.

When the on-screen control panel appears e.g. (when Playback Disc is selected from the START menu.)

DVD-V

Playback/menu access

RETURN

You can operate the playback with the indicated controls.

The on-screen control panel can also be shown by using a button on the TVs remote control (e.g. [OPTION]).

This works only during DVD/CD or USB playback and resume modes or, while iPod music playback screen is displayed on the TV.

If the TV has automatically switched to the HDMI input mode for this unit

The TV will automatically switch to TV tuner mode when:

you press [EXIT] button on the TVs remote control to exit VIERA Link Control. you press [EXIT] or [RETURN] button on the TV s remote control to exit the START menu.

(This does not work during playback or resume mode when DVD/CD or

USB is selected as the source.)

Note

Depending on the menu, some button operations cannot be performed from the TV s remote control. You cannot input numbers with the numbered buttons on the TV s remote control ([0] to [9]). Use this units remote control to select the play list etc.

5.4. Using of iPod

REPEAT

USB, iPod

PLAY

SKIP

STOP

SURROUND

SETUP

REPEAT

USB

iPod

PLAY

SKIP SKIP

PAUSE

STOP

SURROUND

SETUP

RADIO EXT-IN

RETURN

RADIO/EXT-IN

PAUSE

FUNCTIONS

RETURN

You can play an external device through your home theater system.

Using the iPod

Preparation

To view photos/videos from the iPod

Ensure the video connection to the SCART (AV) terminal on this unit and select VIDEO from VIDEO OUT SCART in VIDEO menu.

Operate the iPod menu to make the appropriate photo/video output

settings for your TV. (Refer to operating instructions of your iPod.) To display the picture, turn on the TV and select the appropriate video input mode. Before connecting/disconnecting the iPod, turn the main unit off or reduce the volume of the main unit to its minimum.

Connect the iPod (not included) firmly.

Recharging starts when the iPod is inserted.

USB

iPod

Select "IPOD".

The iPod automatically switches to this units display mode.

Music menu appears on the TV. e.g.

iPod

Music

Playlists

Artists Albums Songs Podcasts Genres Composers Audiobooks

OK RETURN

Select the menu.

Each time you press the button: Music menu ---- -------------------------) Video menu

When using the START menu in IP OD mode

e.g.

Music: Shows the music menu. Videos: Shows the video menu.

iPod menu (iPod LCD)

iPod Home Cinema

Music

Videos All (iPod display)

Sound

OK RETURN

All (iPod display): Switches to iPod menu.

Enjoying music/videos

Select music or video menu on the TV.

Select an item.

Press [ , ] to skip page by page. To return to the previous screen, press [RETURN].

Play starts from the selected song or video. e.g. music playback screen

Playback condition

Song Artist

Album

These icons will only appear for music mode.

iPod

3 of 20 Good morning Ronaldo

Happy days

2:43 -1:15

RETURN

Home Cinema

Shuffle mode Repeat mode

Current position

Hold the dock when connecting/disconnecting the iPod. Attach the dock adapter which should be supplied with your iPod to the dock for the stable use of the iPod. If you need an adapter, consult your iPod dealer.

: Song shuffle : Album shuffle

Basic controls (For music and videos only) Button Function

[ PLAY] Play [ STOP], [ PAUSE] [ ] Skip

(press and hold) []

Other methods of playback

Shuffle mode

Pause

Press [PLAY MODE] several times. During the music playback: SONGS, ALBUMS, OFF During the video playback: TRACKS, ALBUMS, OFF

Repeat mode Press [REPEAT] several times. During the music/video playback: ONE, ALL, OFF

Enjoying photos

Play a slideshow on your iPod.

You can use the remote control to operate the iPod menu. [ , ]: To navigate menu items. [OK]: To go to the next menu. [RETURN]: To return to the previous menu.

About recharging the battery

iPod will start recharging regardless of whether this unit is on or off.

IPOD will be shown on the main units display during iPod charging in main unit standby mode. Check iPod to see if the battery is fully recharged. If you are not using iPod for an extended period of time after recharging has completed, disconnect it from main unit, as the battery will be depleted naturally. (Once fully recharged, additional recharging will not occur.)

Compatible iPod

iPod touch 2nd generation iPod nano 4th generation iPod touch (8GB, 16GB) iPod nano 3rd generation (video) (4GB, 8GB) iPod classic (80GB, 160GB) iPod nano 2nd generation (aluminum) (2GB, 4GB, 8GB) iPod 5th generation (video) (60GB, 80GB) iPod 5th generation (video) (30GB) iPod nano 1st generation (1GB, 2GB, 4GB) iPod 4th generation (colour display) (40GB, 60GB) iPod 4th generation (colour display) (20GB, 30GB) iPod 4th generation (40GB) iPod 4th generation (20GB) iPod mini (4GB, 6GB)

Compatibility depends on the software version of your iPod.

Select the iPod menu.

5.5. USB Connection and Operations

You can connect and play tracks or files from USB mass storage class devices. Devices which are defined as USB mass storage class:

USB devices that support bulk only transfer. USB devices that support USB 2.0 full speed.

Preparation

Before connecting any USB mass storage device to the unit, ensure that the data stored therein has been backed up. It is not recommended to use a USB extension cable. The USB device connected using the cable will not recognised by this unit.

Connect the USB device (not included).

Play starts from the selected content.

Press [SURROUND] to enjoy the surround sound effect. For other operating functions, they are similar to those described in

Playing Discs .

Supported Formats

For Panasonic D-Snap/DIGA

Maximum: 256 folders, 4000 files, 28 characters for file/folder name Only one memory card will be selected when connecting a multiport USB card reader. Typically the first memory card inserted.

Playing from an USB device

Select U SB .

The menu screen appears. e.g.

If PLAYBACK MENU screen appears, select AUDIO/PICTURE or VIDEO by pressing [ , ] and then [OK].

Select an item.

Press [ , ] to skip page by page. To return to the previous screen, press [RETURN]

Still pictures JPEG (Extension: .jpg , .JPG , .jpeg , .JPEG ) Music MP3 (Extension: .mp3 , .MP3 )

WMA (Extension: .wma , .WMA

Video MPEG4* (Extension: .asf , .ASF )

USB device

Main unit

iPod

USB

ROOT

Songs Concert_01 Concert_02 Southern_AI

NOTE

5.6. Speaker Connection

AV OUT

OPTICAL

COMPONENT

Speaker connections

Setup example

Pay attention to the type of speaker and the connector colour when you place the speakers. The speaker illustration below shows images of each speaker type.

PURPLE

SUBWOOFER

GREEN

CENTER

6 5 2 1 4 3

CENTERSUBWOOFER FRONT

RED

FRONT

(R)

SPEAKERS

LRL

SURROUND

OPTICAL

WHITE

FRONT

(L)

AV OUT

COMPONENT VIDEO OUT

GRAY

SURROUND

(R)

FM ANT (75 )

Main unit

Speaker cable stickers

FRONT

Lch

BLUE

SURROUND

(L)

6 5 2 1 4 3

CENTERSUBWOOFER FRONT

SURROUND

Connect to the main unit s terminals of the same colour when you make the speaker connection.

If the speaker-cable stickers are included as an accessory:

Use of the speaker-cable stickers is convenient when making cable connections.

NOTE

Match the connector color and the type of speaker as shown above.

Push!

5.7. Disc Information

5.7.1. Disc Playability (Media)

Commercial discs

Disc Logo

Indicated in these

instructions by

Remarks

DVD-Video

Video CD

Recorded discs ( : Playable,

Disc Logo

DVD-RAM

DVD-R/RW

DVD-R DL

: Not playable)

DVD-VR

DVD-V

VCD

Recorded on a

DVD video

recorder, etc.

DVD-V

——

High quality movie and music discs

Music discs with video Including SVCD (Conforming to IEC62107)

Music discs

Recorded on a personal

computer, etc.

WMA MP3 JPEG DivXMPEG4

—

——— — —

Finalizing

Not necessary

Necessary

+ R/++RW

+ R

CD-R/RW

——() ——— — — ——() ——— — —

———

Necessary Necessary

Necessary

* For EG only

It m

ay not be possible to play all the above-mentioned discs in some cases due to the type of disc, the condition of

the recording, the recording method, or how the files were created. [Refer to Section 7.7.2. File Extension Type Support

This unit can play CD-R/RW recorded with CD-DA or Video CD format.

Discs recorded on DVD recorders or DVD video cameras, etc. using Version 1.1 of the Video Recording Format (a unified video recording standard).

Discs recorded on DVD recorders or DVD video cameras using Version 1.2 of the Video Recording Format (a

WMA/MP3/JPEG/MPEG4/DIVX)]

unified video recording standard).

Discs recorded on DVD recorders or DVD video cameras using DVD-Video Format.

Recorded using a format different from DVD-Video Format, therefore some functions cannot be used.

A process that allows play on compatible equipment. To play a disc that is indicated as "Necessary", the disc must first be finalized on the device it was recorded on.

Closing the session will also work.

Note about using a DualDisc

The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so playback may not be possible.

Discs that cannot be played

Blu-ray, HD DVD, AVCHD discs, DVD-RW version

1.0, DVD-Audio, DVD-ROM, CD-ROM, CDV, CD-G, SACD, DivX Video Discs and Photo CD, DVD-RAM that cannot be removed from their cartridge, 2.6 GB and 5.2 GB DVD-RAM, and "Chaoji VCD" available on the market including CVD, DVCD and SVCD that do not conform to IEC62107.

Video systems

This unit can play PAL and NTSC, but y our TV must match the system used on the disc. PAL discs cannot be correctly viewed on an NTSC TV. This unit can convert NTSC signals to PAL 60 for viewing on a PAL TV ( 22, "NTSC DISC OUT" in "VIDEO" menu).

5.7.2. File Extension Type Support (WMA/MP3/JPEG/MPEG4/DivX)

Format Disc Extension Reference

WMA CD-R/RW .WMA

MP3

JPEG

MPEG4

DivX

DVD-RAM DVD-R/RW CD-R/RW

.wma

.MP3 .mp3

.JPG .jpg .JPEG .jpeg

.ASF .asf

.DIVX .divx .AVI .avi

Compatible compression rate: between 48 kbps and 320 kbps You cannot play WMA files that are copy-protected. This unit does not support Multiple Bit Rate (MBR: an encoding process for audio conte nt that produces an audio file encoded at several different bit rates).

This unit does not support ID3 tags. Sampling frequency and compression rate:

DVD-RAM, DVD-R/RW: CD-R/RW: 8, 11.02, 12, 16, 22.05, 24 kHz (8 to 160 kbps), 32, 44.1 and 48 kHz (32 to 320 kbps)

JPEG files taken on a digital camera that conform to DCF Standard (Design rule for Camera File system) Version1.0 are displayed.

Files that have been altered, edited or saved with computer picture editing software may not be

displayed. This unit cannot display moving pictures, MO TION JPEG and other such formats, still pictures other than JPEG (e.g. TIFF), or play pictures with attached audio.

You can play MPEG4 data [conf orming to SD VIDEO specifications (ASF standard)/ MPEG4 (Simple Profile) video system/G.726 audio system] recorded with Panasonic SD multi cameras or DVD recorders with this unit. The recording date may differ from that of the actual date.

Plays all versions of DivX audio system] with standard playback of DivX supported. DivX files greater than 2 GB or hav e n o i ndex may not be played properly on this unit. This unit supports all resolutions up to maximum of 720k 480 (NTSC)/720k 576 (PAL). You can select up to 8 types of audio and subtitles on this unit.

11.02, 12, 22.05, 24 kHz (8 to 160 kbps), 44.1 and 48 kHz (32 to 320 kbps)

ﬁ

video (including DivXﬁ6) [DivX video system/MP3, Dolby Digital or MPEG

ﬁ

media files. Functions added wit h DivX Ultra are not

There may be differences in the display order on the menu screen and computer screen. This unit cannot play files recorded using packet write.

DVD-RAM

Discs must conform to UDF 2.0.

DVD-R/RW

Discs must conform to UDF bridge (UDF 1.02/ISO9660). This unit does not support multi-session. Only the default session is played.

CD-R/RW

Discs must conform to ISO9660 level 1 or 2 (except for extended formats). This unit supports multi-session but if there are many sessions it takes more time for play to start. Keep the number

of sessions to a minimum to avoid this.

6 Self-Diagnosis and Special Mode Setting

6.1. Service Mode Summary Table

The service modes can be activated by pressing various button combination on the main unit and remote control unit. Below is the summary for the various modes for checking:

Press [ ] RETURN button on remote control, in order to enter the service mode.

Main unit buttons Remote control unit buttons Application Note

[STOP] [0] Error code check. (Refer to the section

[5] Jitter checking.

[PAUSE] Initial setting of laser drive current.

[FUNCTIONS] DVD laser drive current check. (Refer to the section

[3] CD laser drive current check. [6] Region display and mode.

[SOUND] CPPM/CRM keys check.

[7] Micro-processor firmware version check. (Refer to the section

[]

[OK] DVD Module P.C.B. reset.

[8] DVD Module P.C.B. firmware version check. (Refer to the section [] Timer 1 check. [] [] [] Timer 2 reset.

Initialization of the player (factory setting is restored). Used after replacement of Micro-processor (DV5 LSI) IC, FLASH ROM IC (IC8651), EEPROM IC (IC8611) and DVD Module P.C.B.

Timer 1 reset. Timer 2 check.

“6.2.1. Service Mode Table 1” for more information.)

“6.2.2. Service Mode Table 2” for more information.)

“6.2.3. Service Mode Table 3“for more information.)

“6.2.4. Service Mode Table 4“for more information.)

Note:

An error code will be canceled if a power supply is turned OFF. *1: CPPM is the copy guard function beforehand written in the disk for protection of copyrights. *2: CEC is the consumer electronic control used for high-level user control of HDMI-connected devices. *3: HDCP is the specification developed to control digital audio & video contents transmission for DVI or HDMI connections.

6.2. Service Mode Table

By pressing various button combinations on the main unit and remote control unit, you can activate the various service modes fo r checking.

Special Note:

• Due to the limitations of the no. characters that can be shown on the FL Display, the “FL Display” button on the remote control unit can be used to show the two display pages. (Display 1 / Display 2).

• Refer to Section 5.1 for the section on “Remote Control Key Buttons Operations”.

6.2.1. Service Mode Table 1

Error code

check

Jitter check

Item

DescriptionMode Name

Error code check The latest error code stored in the EEPROM IC is displayed.

Note: Refer to "Section 8.3 DVD Self Diagnostic Function-Error Code" for more detailed information on the error codes.

Jitter check. Jitter rate is measured and displayed. Measurement is repeatedly done in the cycle of one second. Read error counter starts from zero upon mode setting. When target block data failed to be read out, the counter advances by one increment. When the failure is caused by minor error, it may be corrected when retried to enable successful reading. In this case, the counter advances by one. When the error persists even after retry, the counter may jump by two or more.

FL Display sequence: Display 1 2.

FL Display

F / H / U

Error code (play_err) is expressed in the following convention. Error code = 0 x DAXX is expressed: DVDnn U12 Error code = 0 x DBXX is expressed: DVDnn H12 Error code = 0 x DXXX is expressed: DVDnn F123 Error code = 0 x 0000 is expressed: DVDnn F--* "xx" denotes the error code

(Display 1)

Jitter check mode

Jitter rate is shown in decimal notation to one place of decimal. Focus drive value is shown in hexadecimal notation.

(Display 2)

Lead Error Counter

Jitter rate

Focus Drive Value

Key Operation

Front Key

In STOP (no disc) mode, press [STOP] button on the main unit, and [0] button on the remote control unit. *With pointing of cursor up and down on display. Cancelled automatically 5 seconds later. To exit, press [POWER] button on main unit or remote control.

In STOP mode, press [STOP] button on the main unit, and [5] button on the remote control unit.

Press [POWER] or [STOP] button to exit.

Press [FL Display] on remote control unit for next page (FL Display).

Initial setting of

laser drive

current

Initial setting of laser drive current. Initial current value for the DVD laser and CD laser is separately saved in the EEPROM IC.

FL Display sequence: Display 1 2.

(Display 1)

Laser current measurement mode

The value denotes the current in decimal notation.

(Display 2)

CD Laser

The above example shows the initial current is XXXmA and YYYmA for CD laser and DVD laser respectively when the laser is switched on.

DVD Laser

In STOP (no disc) mode, press [STOP] button on the main unit, and [PAUSE] button on the remote control unit. Cancelled automatically 5 seconds later.

Press [FL Display] on remote control unit for next page (FL Display) on values of laser drive current.

6.2.2. Service Mode Table 2

DVD laser

drive current

measurement

CD laser drive

current

measurement

Item

DescriptionMode Name

DVD laser drive current measurement. DVD laser drive current is measured and the result is displayed together with the initial value stored in the EEPROM IC. After the measurement, DVD laser emission is kept on. It is turned off when POWER key is switched off.

FL Display sequence: Display 1 2.

CD laser drive current measurement. CD laser drive current is measured and the result is displayed together with the initial value stored in the EEPROM IC. After the measurement, CD laser emission is kept on. It is turned off when POWER key is switched off.

FL Display sequence: Display 1 2.

FL Display

(Display 1)

DVD laser current measurement mode

The value denotes the current in decimal notation.

(Display 2)

DVD Laser Initial Value

The above example shows the initial current is XXXmA and the measured value is YYYmA.

(Display 1)

The value denotes the current in decimal notation.

(Display 2)

DVD Laser Value

CD laser current measurement mode

Key Operation

Front Key

In STOP (no disc) mode, press [STOP] button on the main unit, and [FUNCTIONS] button on the remote control unit. Cancelled automatically 5 seconds later.

Press [FL Display] on remote control unit for next page (FL Display) on values of dvd drive current.

In STOP (no disc) mode, press [STOP] button on the main unit, and [3] button on the remote control unit. Cancelled automatically 5 seconds later.

Press [FL Display] on remote control unit for next page. (FL Display)

Region display

CPPM/CRM Keys Check

Region code display, TV broadcasting system & the model no. information.

Note: Refer to Figure 6.1 for "Video Design Information".

CPPM/CRM refers to the Content Protection for Recordable Media and Pre-Recorded Media. It displays the existence of the keys as "1" or "0". OK: Existing of keys. NG: Non existing of keys.

CD laser initial value

The above example shows the initial current is XXXmA and the measured value is YYYmA.

N: no PAL / P: PAL

Region No.: 0-8

0: NG

1: OK

CD laser value

Model No. Information

N: NTSC / 6: PAL60

In STOP (no disc) mode, press [STOP] button on the main unit, and [6] button on the remote control unit. Cancelled automatically 5 seconds later.

In STOP (no disc) mode, press [STOP] button on the main unit, and [SOUND] button on the remote control unit. Cancelled automatically 5 seconds later.

Product

OSD

Default

English

Japanese

English

OSD Menu Language

English, Spanish, Canadian, French

English, French, German, Spanish, Polish, Russian, Czech, Hungarian

English, French, German, Italian, Spanish, Polish, Swedish, Dutch English, French, German, Spanish, Polish, Russian, Czech, Hungarian English, Traditional Chinese

English, French, German, Italian, Spanish, Polish, Swedish, Dutch English, Spanish, French, Brazilian Portuguese English, French, German, Spanish, Polish, Russian, Czech, Hungarian

Code

TV Broadcasting

System

NTSC

PAL

NTSC

PAL

NTSC

SECAM

PAL

Signal System

(Default)

NTSC (*A)

PAL (*C)

NTSC (*B)

PAL (*C)

NTSC (*D)

PAL (*C)

NTSC (*B)

Region Display

(Default)

1PN

2PN

2P6

3PN

4P6

4PN

5P6

6PN

Model Series

P, PC, PX

(S) Japanese, English

EB, EG

GC, GS

GA, GD, GT

PN, PH, PU,

GK English, Simplified Chinese

Country Region

USA, Canada, PX

Japan

Europe

Middle East

Hong Kong,

South East Asia,

Korea, Taiwan

New Zealand,

Australia

Central/South/

Latin America

CIS

China

Region

NTSC (*A)

Source Output

Screen Saver NTSC

NTSC disc NTSC

PAL disc

NTSC (*D)

Source Output

Screen Saver NTSC

NTSC disc NTSC

PAL disc NTSC

PAL (DVD-V)

NTSC (DVD-A/VCD)

NTSC (*B)

Source Output

Screen Saver NTSC

NTSC disc

PAL disc PAL

Explanation of Display

NTSC (default)

PAL60

Figure 6.1 Video Design Information

PAL (*C)

Source Output

Screen Saver PAL

NTSC disc

PAL disc PAL

Individual Model Code

N: If NTSC disc is played, NTSC output. 6: If NTSC disc is played, PAL60 output.

Can play PAL disc

Region code

PAL60 (default)

NTSC

6.2.3. Service Mode Table 3

Micro-processor

firmware version

display &

EEPROM

checksum

display.

Item

DescriptionModel Name

Micro-processor firmware version display & EEPROM checksum display. EEPROM checksum is only available due to existence of EEPROM IC.

Note: Condition 1/2/3 shows the state of EEPROM IC.

FL Display sequence: Display 1 2 3.

FL Display

(Display 1)

(Display 2)

(Condition 1)

If the version of the EEPROM does not match, [NG] is displayed.

(Condition 2)

(a) If there is NO EEPROM header string OR (b) If there is no EEPROM (no data is received by Micro-processor), [NO] is displayed.

(Condition 3)

Key Operation

Front Key

In STOP (no disc) mode, press [STOP] button on the main unit, and [7] button on the remote control unit. Cancelled automatically 5 seconds later.

Initialization

DVD

Module P.C.B.

Reset

Initialization. User settings are cancelled and player is initialized to factory setting. It is necessary when after replacement of Micro-processor (DV5 LSI) IC, FLASH ROM IC (IC8651), EEPROM IC (IC8611) & DVD Module P.C.B.

To reset DVD Module P.C.B. This process is used when the DVD Module P.C.B. or FLASH ROM IC is replaced with a new one.

If the EEPROM version matches, checksum [YYYY] is displayed.

(Display 3)

Opecon Version

EEPROM Checksum (If applicable, refer below.)

Press [FL Display] button on remote control unit for next page. (FL Display)

Press ’RETURN’ button on remote control. In STOP (no disc) mode, press [STOP] button on the main unit, and [ 10] button on the remote control unit.

Cancelled automatically 3 seconds later.

While in initialization mode, press & hold [STOP] button on the main unit, follow by [OK] button on the remote control unit. Cancelled automatically 5 seconds later.

6.2.4. Service Mode Table 4

DVD

Module P.C.B.

firmware

version display

Timer 1 check

Item

DescriptionMode Name

DVD Module P.C.B. firmware version is displayed on the FL Display. The firmware version can be updated using recovery disc.

Note: It is necessary to check for firmware version before carrying out the version up using the disc.

Timer 1 check Laser operation timer is measured separately for DVD laser and CD laser.

FL Display sequence: Display 1 2.

FL Display

System controller version

Destination

System controller generation

Region No.: 0-8

(Display 1)

DVD laser usage time

Shown to the above is DVD laser usage time, and to the below is CD laser usage time. Time is shown in 5 digits of decimal notation in a unit of 10 hours. "00000" will follow "99999". (DVD laser)

(Display 2)

Key Operation

Front Key

In STOP (no disc) mode, press [STOP] button on the main unit, and [8] button on the remote control unit.

Cancelled automatically 5 seconds later.

In STOP (no disc) mode, press [STOP] button on the main unit, and [ ] button on the remote control unit. Cancelled automatically 3 seconds later.

Press [FL Display] button for next page of FL Display.

Timer 1 reset

Timer 2 check

Timer 2 reset

Timer 1 reset Laser operation timer of both DVD laser and CD laser is reset all at once.

Timer 2 check Spindle motor operation timer

Timer 2 reset Spindle motor operation timer

CD laser usage time

Time is shown in 6 digits of decimal notation in a unit of 10 hours. "000000" will follow "999999". (CD laser)

Time is shown in 5 digits of decimal notation in a unit of 10 hours. It will clear to "00000" upon reset.

Time is shown in 5 digits of decimal notation in a unit of 1 hour. "00000" will follow "99999".

Time is shown in 5 digits of decimal notation in a unit of 1 hour. It will be cleared to "00000" upon activating this.

While displaying Timer 1 data, press [STOP] button on the main unit, and [ ] button on the remote control unit. Cancelled automatically 5 seconds later

In STOP (no disc) mode, press [STOP] button on the main unit, and [ ] button on the remote control unit. Cancelled automatically 5 seconds later.

While displaying Timer 2 data, press [STOP] button on the main unit, and [ ] button on the remote control unit. Cancelled automatically 5 seconds later.

+ 130 hidden pages