Panasonic RP-SDP16GU1K, RP-SDP12GU1K, RP-SDP08GU1K, RP-SDP02GU1K, RP-SDP04GU1K Operating Instructions Manual

Operating Instructions

PP

Manuel d’utilisation

SDHC Memory Card

Carte mémoire SDHC

SD Memory Card

Carte mémoire SD

Model No./

N° de modèle

RP-SDP16GU1K/RP-SDP12GU1K/

RP-SDP08GU1K/RP-SDP04GU1K/

RP-SDP02GU1K/

RP-SDR08GU1A/RP-SDR04GU1A/

RP-SDR02GU1A/

THE FOLLOWING APPLIES ONLY IN THE U.S.A./CE QUI SUIT NE S’APPLIQUE QU’AUX ÉTATS-UNIS
FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.

Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Telephone No.: 1-800-211-7262

THE FOLLOWING APPLIES ONLY IN CANADA

This Class B digital apparatus complies with Canadian ICES-003.

CE QUI SUIT NE S’APPLIQUE QU’AU CANADA

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

ENGLISH

About this SDHC memory card

(RP-SDP16GU1K, RP-SDP12GU1K, RP-SDP08GU1K,
RP-SDP04GU1K, RP-SDR08GU1A, RP-SDR04GU1A)

This SDHC memory card can only be used with SDHC
compatible equipment. Before using this card, please confirm
that your equipment is compatible with SDHC memory cards.
¢ You can insert an 8 GB or more SDHC memory card into the

direct slot on a personal computer operating on Windows
Vista. However, Windows Vista may require upgrading before
the memory card can be used.
Please refer to: http://support.microsoft.com/kb/936825
Windows Vista is a registered trademark of Microsoft
Corporation.

About writing on this card

You can write notes directly onto this card
with a pen, etc.
Do not use excessive force as it may
damage the card. Take care not to stain the
metal terminals.

Protecting your data

≥ Switch the write-protect switch a to

“LOCK”. Unlock when you want to record
or edit the card again.

≥ While data is being read or written, do not

remove the card or turn off any equipment
using the card. Do not remove the
batteries from battery-operated
equipment. These actions can cause data to be destroyed.

≥ Make backup copies of your data wherever possible.

Panasonic will not accept responsibility for any data loss, or
loss directly or indirectly caused by data loss.



LOCK

Handling and storage precautions

≥ Keep out of reach of children. If swallowed, seek medical

advice immediately.

≥ This card is formatted to the SDHC(SD) memory card standard.

If reformatting is ever necessary, format it using SDHC(SD)
compatible equipment or SD formatting software compatible
with an SDHC(SD) memory card. Formatting the card with any
other software will make the card non-standard and cause
problems with compatibility and performance. For a free version
of SD formatting software, visit the following homepage.
http://panasonic.jp/support/audio/sd/download/sd_formatter_e.html

≥ Do not use or store in locations directly exposed to sunlight, a

heat vent, or a heating appliance.

≥ Do not disassemble or modify the card.
≥ Do not impact, bend, drop, or wet.
≥ Do not touch the metal terminals with your hands or metal

objects.

≥ Do not detach the label on the card.
≥ Do not attach other labels or stickers.
≥ Do not use or store this card in a location subjected to static

electricity or electrical noise. If the host device does not operate
normally due to the effects of static electricity on the card, then
remove the card from the host device and insert it again.

≥ Do not use or store in humid or dusty locations.
≥ Do not use or store in locations exposed to corrosive gases.

Specifications

Interface: Standard SDHC(SD) memory card

interface

RP-SDP16GU1K/RP-SDP12GU1K/RP-SDP08GU1K/
RP-SDP04GU1K/RP-SDP02GU1K

Clock frequency: up to 50 MHz

RP-SDR08GU1A/RP-SDR04GU1A/RP-SDR02GU1A

Clock frequency: up to 25 MHz

Operating voltage: 2.7 V to 3.6 V

Dimensions (WtHtD):24.0 mma32.0 mma2.1 mm

Mass (Weight): 2 g (0.07 oz)

≥ Specifications are subject to change without notice.
≥ Mass and dimensions are approximate.

( aa)

Cautions about disposal or transferring
ownership of this card

≥ SDHC(SD) compatible equipment may contain the functions

“Format” and “Erase”. However, in most cases all data on the
card will not be completely erased even after performing these
functions. When disposing or transferring ownership of the
card, we recommend using Panasonic formatting software (see
“Handling and storage precautions”) to completely erase all
data from the card.

≥ When you dispose of the SDHC(SD) memory card, destroy it

physically or erase all data completely and follow your local
rules of separation and disposal of waste.

≥ SDHC Logo is a trademark.
≥ SD Logo is a trademark.

2