Panasonic R07002 User Manual
RQTX_FX85_En.fm Page 1 Thursday, December 21, 2006 2:56 PM
Designed for Panasonic DVD Home Theater Sound Systems
that are compatible with the SH-FX85.
Dear customer
Thank you for purchasing this product. For optimum performance and safety, please
read these instructions carefully.
Before connecting, operating or adjusting this product, please read the
instructions completely.
Please keep this manual for future reference.
System
Digital transmitter
Wireless sound system
As an ENERGY STAR Partner,
Panasonic has determined that
this product meets the ENERGY STAR
guidelines for energy efficiency.
§
For Canada only: The word “Participant” is used in place of the word “Partner”.
q
P PC
p
®
SH-FX85
SH-FX85T
SB-FX85
®
Operating Instructions
Wireless Sound System
Model No. SH-FX85
Table of Contents
Introduction
IMPORTANT SAFETY INSTRUCTIONS .................................................................. 3
Maintenance............................................................................................................. 3
Product service ........................................................................................................ 3
Use
Setup ........................................................................................................................ 4
Connections .......................................................................................................... 4
Making the wireless link ........................................................................................ 5
Control reference guide ............................................................................................ 6
Enjoying audio from the home theater unit............................................................... 6
Using this unit as a stand-alone amplifier................................................................. 7
Reference
Limited Warranty (ONLY FOR U.S.A.)...................................................................... 8
Limited Warranty (ONLY FOR CANADA) ............................................................... 10
Troubleshooting guide ............................................................................................ 11
Specifications ......................................................................................................... 12
Accessory
Please check and identify the supplied accessory. Use number indicated in
parentheses when asking for replacement part. (Product number correct as of January
2007. This may be subject to change.)
For U.S.A.: To order this accessory, refer to “Accessory Purchases” on page 9.
For Canada: To order this accessory, call the dealer from whom you made your purchase.
∏ 1 AC power supply cord (K2CB2CB00018)
For use with this unit only. Do not use it with other equipment. Also, do not use
cords for other equipment with this unit.
RQTX0051-Y
F0107TM0
RQTX_FX85_En.fm Page 2 Thursday, December 21, 2006 2:56 PM
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE,
≥
DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE,
DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED
WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
≥
USE ONLY THE RECOMMENDED ACCESSORIES.
≥
DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO
ENGLISH
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET
OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD
DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
RQTX0051
2
DO NOT REMOVE SCREWS. NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC caution: To maintain compliance with FCC regulations, shielded interface
cables must be used with this equipment. Operation with non-approved equipment
or unshielded cables may result in interference to radio and TV reception. Any
changes or modifications not approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-7262
WARNING:
To satisfy FCC RF exposure requirements for mobile transmitting devices,
a separation distance of 20 cm or more should be maintained between
the antenna of this device and persons during device operation.
To ensure compliance, operations at closer than this distance is not recommended.
The antenna used for this transmitter must not be co-located in conjunction with
any other antenna or transmitter.
THE FOLLOWING APPLIES ONLY IN CANADA
This device complies with RSS-210 of the IC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received, including interference that
may cause undesired operation of the device.
RQTX_FX85_En.fm Page 3 Thursday, December 21, 2006 2:56 PM
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety
instructions on the unit and the applicable safety instructions listed below. Keep these
operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding-type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused
for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
- If you see this symbol-
Information on Disposal in other Countries outside the European
Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local
authorities or dealer and ask for the correct method of
disposal.
The socket outlet shall be installed near the equipment and easily accessible. The
mains plug of the power supply cord shall remain readily operable.
To completely disconnect this apparatus from the AC Mains, disconnect the power
supply cord plug from AC receptacle.
Maintenance
Clean this unit with a soft, dry cloth.
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, carefully read the instructions that came with
the cloth.
Product service
1. Damage requiring service—The unit should be serviced by qualified service
personnel if:
(a) The AC power supply cord or AC adaptor has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change in
performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that described in these
operating instructions. Refer all other servicing to authorized servicing personnel.
3. Replacement parts—When parts need replacing ensure the servicer uses parts
specified by the manufacturer or parts that have the same characteristics as the
original parts. Unauthorized substitutes may result in fire, electric shock, or other
hazards.
4. Safety check—After repairs or service, ask the servicer to perform safety checks
to confirm that the unit is in proper working condition.
The servicer will require all components to service your system.
Therefore, should service ever be necessary, be sure to bring the entire system.
Product information
For product information or assistance with product operation:
In the U.S.A., refer to “Customer Services Directory” on page 9.
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at
1-800-561-5505, or visit the website (www.panasonic.ca), or an authorized
Servicentre closest to you.
ENGLISH
Maintenance /
/
Product service
IMPORTANT SAFETY INSTRUCTIONS
RQTX0051
3
RQTX_FX85_En.fm Page 4 Thursday, December 21, 2006 2:56 PM
Setup
Preparation
≥ Turn off all equipment before connection and read the appropriate operating instructions.
≥Connect the AC power supply cord after all other connections are complete.
∫ Wireless setup diagram
e.g.
ENGLISH
Main room
Home theater
unit
Setup
Place the wireless sound system within approximately 30 m (?? ft) from the home
theater unit.
[Note[
≥ Do not use the wireless sound system and digital transmitter in a metal cabinet or
bookshelf.
≥ Depending on your wall thickness and material, the operating range may be
reduced.
You can use up to 2
wireless sound systems.
Other rooms
To avoid interference, maintain the following distances between the wireless
sound system and other electronic devices that use the same radio
frequency (2.4 GHz band).
Wireless sound system
Wireless LAN:
approx. 2 m (6-1/2 ft)
Cordless phone and other
electronic devices:
approx. 2 m (6-1/2 ft)
The wireless sound system will automatically seek a clear channel if any of these
other devices interfere with its communication.
When this happens, the WIRELESS LINK indicator on the wireless sound system
flashes. (“ [W2] ” flashes on the home theater unit.) There is a brief interruption in
audio coming from the wireless sound system.
This is the normal operation of the product working to assure the best possible
performance of your home theater unit.
If the interference persists, try moving the other devices to another location outside
the range of the wireless sound system, or move the wireless sound system nearer
to your home theater unit.
Connections
∫ Digital transmitter
Refer also to the operating instructions for your home theater unit.
Do not insert or remove while the home theater unit is on.
Digital transmitter
Insert fully until you hear a click.
e.g.
DIGITAL
RQTX0051
TRANSMITTER
4
Rear of the home theater unit
∫ AC cord
Raise the antenna mast for best
reception.
OPTION V.1
MUSIC PORT
I/D SET
AC IN
AC power supply cord
To household AC outlet
(AC 120 V, 60 Hz)
Loading...