Manufactured by:
81-IN3057-9922
Before attempting to connect or operate this product, please read these instructions completely.
for
MODEL: Wall Mount Bracket
PWM4 Indoor Use Only
STANDARD INSTALLATION PROCEDURE
INCLUDES MODELS: PWM4 Designed for indoor use, supporting
the WV-CS854 Unitized Camera
CONTENTS INCLUDE:
(1) Metal bracket
(1) Plastic mount cover
(4) #8 x 1/2" bolts
(2) #8 x 3/8" bolts
1. Attach the camera mounting base from the unitized
camera to the wall mount bracket using the 4 - #8 x 1/2"
bolts provided (Figure 1).
NOTE: You may need to detach the bracket from the
camera.
#8 x 1/2"
Bolts
Camera
Mounting
Base
Figure 1
2. Mount the bracket in the desired location (Figure 2).
Mounting hardware not included.
Wall Mount
Bracket
PRODUCT INSTRUCTIONS
4. Assemble the power cable with the connector provided
with the WV-CS854 Unitized Camera (See camera operatĀing instructions). Make electrical connections (Figure 4).
Front view of the female
4
2
Figure 4
5. Attach the cover to the wall mount bracket using
(2) #8 x 3/8" bolts provided (Figure 5).
Figure 5
6. Specifications:
Metal Bracket 14-gauge Powerdercoated steel
Plastic Cover 3/16" ABS
Dimensions (see Figure 6)
Unit Weight 1.5 lbs
connector in the camera
3
cable.
1
Connector Information
Pin
1 AC24V AC Live
2 AC24V AC Neutral
3 Ground
4 Not Used
#8 x 3/8" bolts
Figure 2
3. Attach the Unitized Camera to the wall mount bracket
(Figure 3). Attach the safety wire to the bracket (A).
Place the camera on the wall mount bracket and turn
until it locks (B). Attach the safety screw to the camera
mounting base, using the standard screw (C).
A
B
C
Supplied
with
camera
Figure 3
(4) .27" Dia. Holes
4.50"
1.00" Dia. Hole
Figure 6
Outline Drawings/Specifications
0.38"
1.33"
1.00"
1.00" Dia. Hole
6.00"
0.78"
1.41"
2.58"
0.63"
7.55"
3.00" Radius
1. Read Instructions - All the safety and operating instructions
should be read before the unit is operated.
2. Retain Instructions - The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the unit and in the operating
instructions should be adhered to.
4. Follow Instructions - All operating and user instructions should
be followed.
5. Electrical Connections - Only a qualified electrician should
make electrical connections.
6. Attachments - Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
7. Cable Runs - All cable runs must be within permissible distance.
8. Mounting - This unit must be properly and securely mounted to
a supporting structure capable of sustaining the weight of the
unit. Accordingly:
a. The installation should be made by a qualified service
person, and should conform to all local codes.
b. Care should be exercised to select suitable hardware to
install the unit, taking into account both the composition of the
mounting surface and the weight of the unit. Be sure to
periodically examine the unit and the supporting structure to
make sure that the integrity of the installation is intact. Failure
to comply with the foregoing could result in the unit separating
from the support structure and falling, with resultant damages
or injury to anyone or anything struck by the falling unit.
SAFETY PRECAUTIONSIMPORTANT SAFEGUARDS
CAUTION
RISK OF
ELECTRIC SHOCK!
CAUTION: TO REDUCE THE RISK OF
ELECTRICAL SHOCK, DO NOT EXPOSE
COMPONENTS TO WATER OR MOISTURE.
The lightning flash with an arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of non-insulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
!
UNPACKING
Unpack carefully. Electronic components can be
damaged if improperly handled or dropped. If an item
appears to have been damaged in shipment, replace it
properly in its carton and notify the shipper.
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Be sure to save:
1. The shipping carton and packaging material. They are the
safest material in which to make future shipments of the
equipment.
2. These Installation and Operating Instructions.
SERVICE
For service on Panasonic/Videolarm equipment contact:
Panasonic Technical Center
54 West Gude Dr.
Rockville MD 20850-1150
Phone: 301-762-5125
Fax: 301-251-0347
PANASONIC TECHNICAL SUPPORT
1-800-528-6747
9:00 AM - 5:00 PM EASTERN TIME
- 2 -