Panasonic PV 27D53, PV 20D53 User Manual

TV / DVD Combination
Operating Instructions
Initial Setup
Model No.
PV-20D53/PV-27D53
• Initial Setup and Connection Procedures are on pages 10 to 11.
MULTI FORMAT PLAYBACK
DVD Operation
TV Operation
Advanced Operation
*Ability to play back may depend on recording conditions.
As an ENERGY STAR® Partner, Matsushita Electric Corporation of America has determined that this product or product model meets the ENERGY STAR
Please read these instructions carefully before attempting to connect, operate or adjust this product. Please save this manual. Spanish Quick Use Guide is included. (Guía para rápida consulta en español está incluida.)
This operating instruction book is designed for use with models PV-20D53 and PV-27D53. Illustrations in this manual show the PV-27D53. Fea tures may vary, so please read care ful ly.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
®
guidelines for energy effi ciency.
LSQT0669B
For Your Information

Important Safeguards and Pre cau tions

READ AND RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS. HEED ALL WARNINGS IN THE MANUAL AND ON UNIT
INSTALLATION
1 POWER SOURCE CAUTION
Operate only from power source indicated on unit or in this manual. If uncertain, have your Electric Utility Service Company or Video Products Dealer verify your home power source.
2 POWER CORD PLUG
For safety, this unit has a polarized type plug (one
wide blade), or a three-wire grounding type plug. Always hold the plug fi rmly and make sure your hands are dry when plugging in or unplugging the AC
power cord. Regularly remove dust, dirt, etc. on the plug. POLARIZED PLUG CAUTION: The plug fi ts into outlet only one way. If it cannot be fully inserted, try reversing it. If it still will not fi t, have an electrician install the proper wall outlet. Do not tamper with the plug.
GROUNDING PLUG CAUTION: The plug requires a three-hole grounding outlet. If necessary, have an electrician install the proper outlet. Do not tamper with the plug.
3 POWER CORD
To avoid unit malfunction, and to protect against
electrical shock, fi re or personal injury:
- Keep power cord away from heating appliances and walking traffi c. Do not rest heavy objects on, or roll such objects over the power cord.
- Do not tamper with the cord in any way.
- An extension cord should have the same type plug (polarized or grounding) and must be securely connected.
- Overloaded wall outlets or extension cords are fi re hazards.
- Frayed cords, damaged plugs, and damaged or
cracked wire insulation are hazardous and should
be replaced by a qualifi ed electrician.
4 DO NOT BLOCK VENTILATION HOLES
Ventilation openings in the cabinet release heat generated during operation. If blocked, heat build-up may result in a fi re hazard or heat damage to discs.
For your protection:
a.Never cover ventilation slots while unit is ON,
or operate unit while placed on a bed, sofa, rug, or other soft surface.
b.Avoid built-in installation, such as a book case
or rack, unless properly ventilated.
5 AVOID EXTREMELY HOT LOCATIONS OR
SUDDEN TEMPERATURE CHANGES
Do not place unit over or near a heater or radiator, in
direct sunlight, inside closed ve hi cles, in high temperature [over 95 °F (35 °C)], or in over 75% humidity. If unit is suddenly moved from a cold place to a warm one, moisture may con dense in unit and on the disc causing dam age. Never sub ject unit to vibration, im pact, or place it so that the sur face is tilted as in ter nal parts may be se ri ous ly dam aged.
6 TO AVOID PERSONAL INJURY
• Never place unit on support or
stand that is not fi rm, level, and adequately strong. The unit could fall causing serious injury to a child or adult and damage to the unit.
• Move any appliance and cart combination with care. Quick stops, excessive force, and uneven surfaces may cause objects to overturn.
• Carefully follow all operating instructions.
OUTDOOR ANTENNA INSTALLATION
1 SAFE ANTENNA AND CABLE CONNECTION
An outside antenna or cable system must be properly grounded to provide some protection against built up static charges and voltage. Section 810 of the National Electrical Code, ANSI/NFPA 70 (in Canada, part 1 of the Canadian Electrical Code) provides information regarding proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, con nec tion to grounding electrodes, and requirements for the grounding electrode.
2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER LINES
OR CIRCUITS
Locate an outside antenna system well away from power lines and electric light or power circuits so it will never touch these power sources should it ever fall. When installing antenna, absolutely never touch power lines, circuits or other power sources as this could be fatal.
USING THE UNIT
Before unit is brought out of storage or moved to a new location,
refer again to the INSTALLATION section of these safe guards.
1 KEEP UNIT WELL AWAY FROM WATER OR MOISTURE,
such as vases, sinks, tubs, etc.
2 IF EXPOSED TO RAIN, MOISTURE, OR STRONG IMPACT,
unplug unit and have it inspected by a qualifi ed service technician before use.
3 ELECTRICAL STORMS
During a lightning storm, or before leaving unit unused for extended periods of time, disconnect all equipment from the power source as well as the antenna and cable system.
4 WHEN UNIT IS PLUGGED IN
• DO NOT OPERATE IF:
- liquid has spilled into unit.
- unit was dropped or otherwise damaged.
- unit emits smoke, odours, or noises. Immediately unplug unit, and have it inspected by a service
technician to avoid potential fi re and shock hazards.
• Never drop or push any object through openings in unit. Touching internal parts may cause electric shock or fi re hazard. Do not put any foreign object on the tray.
• Keep magnetic objects, such as speakers, away from unit to avoid electrical interference.
5 USING ACCESSORIES Use only accessories recommended by the manufacturer to
avoid risk of fi re, shock, or other hazards.
6 CLEANING UNIT Unplug unit. Use a clean, dry, chemically untreated cloth to
gently remove dust or debris. DO NOT USE cleaning fl uids,
aerosols, or forced air that could over-spray, or seep into unit and cause electrical shock. Any substance, such as wax, adhesive tape, etc. may mar the cabinet surface. Exposure to greasy, humid, or dusty areas may adversely affect internal parts.
ELECTRIC SERVICE EQUIPMENT
NEC
- NATIONAL ELECTRICAL CODE
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
SERVICE
1 DO NOT SERVICE PRODUCT YOURSELF
If, after carefully following detailed operating in struc tions, the unit
does not operate properly, do not attempt to open or remove covers, or make any adjustments not described in the manual. Unplug unit and contact a qualifi ed service tech ni cian.
2 REPLACEMENT OF PARTS Make sure the service technician uses only parts specifi ed by the
manufacturer, or have equal safety char ac ter is tics as original parts. The use of unauthorized substitutes may result in fi re, electric shock, or other hazards.
3 SAFETY CHECK AFTER SERVICING
After unit is serviced or repaired, request that a thorough safety
check be done as described in the manufacturer’s service literature to ensure video unit is in safe operating condition.
2
Safety Precautions/Mesures de sécurité
Warning : To prevent fi re or shock hazard, do not expose this equipment to rain or
Caution : To prevent electric shock, match wide blade of plug to wide slot, fully insert. Avertissement : Afi n de prévenir tout risque d’incendie ou de chocs électriques, ne pas exposer
Attention : Pour éviter les chocs électriques, introduire la lame la plus large de la fi che dans
FCC WARNING : Any unauthorized changes or modifi cations to this equipment would void the
This television receiver provides display of television closed captioning.
CAUTION:
UNIT IS A CLASS I LASER PRODUCT. HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED. WHEN THIS UNIT IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT ATTEMPT TO REPAIR THE UNIT YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
FCC NOTICE:
This equipment has been tested and found to comply with part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when operated in a residential environment. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, use the equipment in another location and/or utilize an electrical outlet different from that used by the receiver. If necessary, consult the dealer or an experienced radio/TV technician for help. You may fi nd the booklet, “Something About Interference” available from FCC local regional offi ces helpful.
mois ture.
cet appareil à la pluie ou à une humidité excessive.
la borne correspondante de la prise et pousser jusqu’au fond.
user’s authority to operate.
CAUTION:
LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM.
ATTENTION:
RAYONNEMENT LASER EN CAS D’OUVERTURE. NE PAS REGARDER DANS LE FAISCEAU.
(Inside of product)
This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: <http://www.eiae.org.>
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
Region Management Information
This unit is designed and man u fac tured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not cor re spond to the Region number of this unit, this unit cannot play this disc.
• The region number of this player is “1.”
• The player will play DVD-Video marked with labels containing “1” or “ALL.”
This symbol warns the user that uninsulated voltage within the unit may have suffi cient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit.
This symbol alerts the user that important literature concerning the operation and main te nance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.
Example:
1
3

Before Using

Congratulations
On your purchase of one of the most sophisticated and reliable products on the market today. Used properly, it will bring you and your family years of enjoyment. Please fi ll in the information below. The serial number is on the tag located on the back of your unit.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
Accessories
Loading the Batteries
1) Open the cover.
2) Insert batteries as marked.
3) Close the cover.
Battery replacement caution
• Do not mix old and new batteries.
• Do not mix alkaline with manganese batteries.
Features for a Quality Picture
PanaBlack™ Picture Tube (PV-27D53 only)
This unit uses a PanaBlack™ picture tube for better color reproduction and picture contrast.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098, and 4,907,093, licensed for limited viewing uses only.
This product incorporates copyright protection
Remote Control
LSSQ0373
technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Cor po ra tion. Reverse engineering or dis as sem bly is prohibited.
Batteries 2 “AA”
To order accessories, call toll free
1-800-332-5368.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
4
4

Table of Contents

TV
DVD
TV
TV
Important Safeguards and Precautions ........................................2
Safety Precautions/Mesures de sécurité.......................................3
Before Using ....................................................................................4
Information (Unit, Disc)................................................................... 6
Location of Controls .......................................................................8
Initial Setup (Ready to Play) .........................................................10
Reset Language, Channels, Clock, Time Zone Adjust...............12
Audio Connections........................................................................14
Basic DVD Operation ....................................................................16
TV Operation..................................................................................18
MTS Broadcast/TV Stereo System............................................... 19
Closed Caption System ................................................................20
TV Timer Features .........................................................................22
On-Screen Display (OSD) .............................................................23
FM Radio ........................................................................................24
Special Features............................................................................26
V-Chip Control Feature ................................................................28
Video/Audio Menu .........................................................................32
Video/Audio Adjustment............................................................... 33
Initial Setup
Initial Setup
DVD Operation
TV Operation
Advanced Operation
DVD
TV
Disc Operation ..............................................................................34
DVD Operation using On-Screen Displays .................................39
MP3/WMA/JPEG Playback Operation..........................................42
DVD Lock Feature..........................................................................45
Settings for DVD Operation..........................................................46
Language Code List ......................................................................49
For Your Information
Before Requesting Service........................................................... 50
Warning and Instruction Displays ...............................................52
Spanish Quick Use Guide/Guía para rápida consulta................53
Limited Warranty ...........................................................................60
Customer Services Directory .......................................................61
Index ...............................................................................................62
55

Information (Unit, Disc)

Specifi cations
Display
Picture Tube
Tuner
Broad cast Channels VHF 2 ~ 13, UHF 14 ~ 69
CA BLE Channels
FM Radio
Band Range 87.5 MHz ~ 108.1 MHz
General
Power Source 120 V AC, 60 Hz
Power Consumption
Television System EIA Standard NTSC color
Speak er
Op er at ing Temperature
Op er at ing Humidity 10 % ~ 75 %
Weight
Di men sions
(W x H x D)
Discs played
DVD disc (DVD-Video, DVD-R)
Compact disc (CD-DA, VIDEO CD, CD-R, CD-RW)
MP3, WMA, JPEG
Digital audio output
Optical digital output Optical connector
Pickup
Wavelength
Note
• Designs and spec i fi ca tions are sub ject to change without no tice.
20 inch measured diagonal 90° defl ection Picture Tube (PV-20D53) 27 inch measured diagonal 100° defl ection Picture Tube (PV-27D53)
Midband A through I (14 ~ 22) Superband J through W (23 ~ 36) Hyperband AA ~ EEE (37 ~ 64) Lowband A-5 ~ A-1 (95 ~ 99) Special CABLE channel 5A (01) Ultraband 65 ~ 94, 100 ~ 125
Power OnApprox. 117 W (PV-20D53)
Approx. 150 W (PV-27D53)
Power
Approx. 3.5 W
Off
2 pieces 3 W (PV-20D53) 2 pieces 5 W (PV-27D53)
5 °C ~ 35 °C (41 °F ~ 95 °F)
23 kg (50.6 lbs.) (PV-20D53) 39 kg (85.8 lbs.) (PV-27D53)
515 mm (20-5/16″) x 505 mm (19-7/8″) x 474 mm (18-11/16″) (PV-20D53) 688 mm (27-1/16) x 653 mm (25-11/16) x 550 mm (21-11/16) (PV-27D53)
) single-sided, single-layer
12 cm (5 12 cm (5″) single-sided, double-layer 12 cm (5″) double-sided, double-layer (one layer per side) 8 cm (3″) single-sided, single-layer 8 cm (3″) single-sided, double-layer 8 cm (3″) double-sided, double-layer (one layer per side)
5
(12 cm) disc
3″ (8 cm) disc
655 nm (DVD) 790 nm (Video CD/CD) Laser power: CLASS II
Discs that can be played
• CD-ROM
• CDV
• CVD
• CD-G
• CD-TEXT
• SACD
• Photo-CD
Disc formats supported by this unit
• DVD-Video format
• DVD-Video formatted discs (fi nalized*) It may not be possible to play these discs in all cases due to the type of disc or condition of the recording.
• Video-CD format
• CD-DA format
• CD-DA format
• Video-CD format
• MP3/WMA/JPEG fi le and fi nalized*.
Disc type Disc Logo
DVD-Video
DVD-R
Video CD
CD-DA
CD-R
CD-RW
• Discs played 8 cm (3″) or 12 cm (5″)
• * A process that allows play on compatible equipment.
Discs which cannot be played with this unit
• DVD with Region No. other than “1” or “ALL”
• DVD of PAL system
• DVD-ROM
• DVD-AUDIO
• DVD-RW
• DVD+RW
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
6
6
Defi nition of Terms
Angle
Some DVD discs feature scenes si mul ta ne ous ly shot from different angles. The ANGLE button can be used to view the scene from different angles. (ANGLE Indicator lights up on the unit when a scene recorded at different angles is detected.)
Chapter Number
Titles are subdivided into numbered sections. You can quickly search for a favorite scene using these numbers.
DVD
A high-density optical disc on which high-quality pictures and sound have been digitally recorded. DVD incorporates new video compression technology (MPEG II) and high-density recording technology which allow entire movies to be recorded with incredible playback quality.
Playback Control
With Video CD (version 2.0), scenes or in for ma tion may be selected for viewing or listening from an interactive menu that appears on the TV screen.
Subtitles
Written dialogue which appears at the bottom of the screen.
Time Number
The elapsed play time from the start of a disc or title. Use to quickly fi nd scenes. some discs.)
Title Number
For DVD discs with two or more titles, the title is numbered as title 1, title 2, etc.
Track Number
Numbers assigned to tracks on Video CDs and CDs to allow specifi c tracks to be quickly located.
Video CD
CD containing picture and sound with same quality level as video tape. This unit also supports Video CDs with playback control (version 2.0).
(May not work with
Disc Handling
Handling precautions
• Sticking a label on the disc may impair DVD-R playback.
• Do not attach sticker to discs. (Do not use discs with exposed adhesive from tape or left over peeled-off stickers.)
• Only hold disc by edges as shown. Fingerprints, dirt, and scratches can cause skipping and distortion.
• Do not write on label side of disc.
• Never use record cleaning sprays, benzine, thinner, static electricity prevention liquids, or any other solvent.
• Be careful not to drop or bend disc.
• Do not place more than 1 disc on disc tray.
• Do not try to close disc tray when disc is not properly placed.
• Always store discs in their proper cases when not in use.
To clean disc surface
With a soft, damp (water only) cloth, gently wipe from the center hole to the outer edge as shown below. (Wiping in a circular pattern will scratch the surface.)
If disc is brought from a cold to a warm environment, moisture may form on the disc
Wipe away moisture with a soft, dry, lint-free cloth before using disc. (See above.)
Improper disc storage
Discs could be damaged if stored or left in areas:
• exposed to direct sunlight.
• that are humid or dusty.
• near heat (i.e. heater, radiator, etc.).
Disc tray
Disc
Initial Setup
If the disc cannot be removed,
First unplug unit. Then, prepare a rigid wire (e.g. an extended paper clip, etc.) and, applying moderate force, insert it straight into the hole at the base of the tray. The tray will eject a little. Now, pull the tray all the way out and remove the disc.
77

Location of Controls

Remote Control Buttons
OPEN/CLOSE
Opens or closes the disc tray.
POWER
Turns the unit on or off.
DISPLAY
Displays the TV status and clock. In DVD mode, displays disc and unit information.
RAPID TUNE
Displays the last channel you were watching.
MUTE
Mutes the sound instantly.
TIMER
Sets ON TIMER or SLEEP TIMER.
ACTION
Displays Main Menu.
CHANNEL UP/DOWN
Selects a channel.
|
SKIP-
Skips back one chapter or track. Goes to previous menu screen.
STOP
Stops playback.
PAU SE
Pauses picture in Play mode and frame advance picture in Still mode.
SEARCH /SLOW
Decreases slow motion speed in Still mode. Reverses raid scene search in Play mode.
AUDIO
Selects the desired audio mode.
ANGLE
Selects the desired angle in DVD mode.
FM/TV
Sets to TV mode. Receives FM radio signal.
DVD
Sets to DVD mode.
NUMBER Keys
Selects a channel directly.
ADD/DELETE/CLEAR
Adds or deletes a channel. Cancels an item on the screen.
MENU
Displays DVD menu.
SELECT
Controls navigation around on-screen menu.
SET
Sets a selected menu.
VOLUME UP/DOWN
Adjusts volume.
PLAY
Begins playback.
SKIP+
Skips one chapter or track. Goes to next menu screen.
TITLE
Selects the desired title by number on some DVDs.
SEARCH/SLOW
Increases slow motion speed in Still mode. Forwards raid scene search in Play mode.
SURROUND/V.S.S.
Creates a deeper, 3-D sound effect.
SUB TITLE
Selects a different subtitle language.
|
RETURN
Returns to Menu screen.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
8
8
ZOOM
Enlarges specifi c portions of picture.
Front View of the unit and Indicators
<Model PV-27D53 unit shown>
Initial Setup
Disc Tray
Audio/Video Input Connector 2 (LINE 2)
Connect from other component. POWER
Turns the unit on or off.
VOLUME UP/DOWN
Adjusts volume.
CHANNEL UP/DOWN
Selects a channel. STOP
Stops playback.
|
SKIP
Skips back one chapter or track. Goes to previous menu screen.
PLAY
Begins playback.
|
SKIP
Skips one chapter or track. Goes to next menu screen.
Rear View of the unit
<Model PV-27D53 unit shown>
AC Power Plug
When plugged into an AC outlet, this unit consumes
3.5 W of electric
power in OFF condition.
Phones Jack
Connect an earphone or headphones.
SLEEPTIMER Indicator
Lights when the Sleep-Timer is set.
ON TIMER Indicator
Lights when the On-Timer is set.
ANGLE Indicator
Lights when a scene recorded at a different angles is detected.
Remote Sensor
OPEN/CLOSE
Opens or closes the disc tray.
PAU SE
Pauses picture in Play mode and frame advance picture in Still mode.
Audio Output Connector (L/R)
Connect to other component.
VHF/UHF Antenna Input Terminal
In from your Antenna or Cable.
Optical digital audio output connector
Connect to Dolby Digital decoder or dts decoder. For details, see page 14.
Audio/Video Input Connector 1
(LINE 1)
Connect from other component.
99
Initial Setup (Ready to Play)
E
Please make all cable or antenna connections before powering on.
Connections
For ANT./Cable Connect the cable from Antenna/Cable to
the VHF/UHF terminal on the unit.
For DSS/Cable Box Connect the OUT jack on your cable box
to the VHF/UHF terminal on the unit with a RF cable.
WARNING
Overtightening “Nut type” RF coaxial cables may damage jacks. Finger tighten only.

Initial Setup (Ready to Play)

Plug the unit power cord into an AC wall outlet.
1
Press POWER* on the remote or unit. The unit comes on and auto channel
2
and clock set starts.
N
0
AUTO CLOCK SET
PROCEEDING
CANCEL : PRESS STOP KEY
CH AUTO SET PROCEEDING
• If you use a cable box, turn it on and set it to the Public Broadcasting Service (PBS) channel in your time zone. If you use a DSS receiver, it must be turned off.
Settings are made automatically. When setup is done, this screen appears.
3
2 / 6 /
2003
THU 12 : 00PM
DST : O
SETT I NG : CH 1
UTO CLOCK SET
A
CO
MPL
ETED
VHF/UHF
VHF/UHF
VHF/UHF
VHF/UHF
Cable TV Converter Box
IN from ANT./CABLE
from
IN ANT./CABL
If AUTO CLOCK SET IS INCOMPLETE screen appears, set the clock using MANUAL CLOCK SET procedure on next page.
UTO CLOCK SET
A
MPL
I S I NCO
PLEASE SET CLOCK BY
R
ESS I NG ACT I ON KEY
P
ETE
Notes
• Function buttons are inoperative during Initial Setup.
• Depending on conditions, Auto Clock Set may take longer than 30 minutes. If so, press STOP to stop setup and perform settings manually. (See page 12-13.)
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
10
10
Important:
*
If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again.
POWER
ACTION
SELECT
SET
STOP
STOP
POWER
Manual Clock Set
If AUTO CLOCK SET was incomplete, manually set the clock as follows.
1
2
3
SET CLOCK
SET
ACT I ON
DST
THU
SELE CT MONTH
SELECT : SET : END
:
Press ACTION twice to start CLOCK and exit.
Press ACTION on the remote to display SET
: ON
CLOCK Menu screen.
Press to select the month and press SET to set. In the same manner, select and set the date, year, time, and DST (Daylight Saving Time).
Reset all unit Memory Functions
When moving unit to a new location, or if a mistake was made in the Initial Setup section.
Initial Setup
DST (Daylight Saving Time)
Unit auto adjusts clock for DST (Daylight Saving Time.)
Spring (First Sunday in April)
DST: ON ➞ Sets clock ahead one hour.
Autumn (Last Sunday in October)
DST: OFF➞ Turns clock back one hour.
• If your area does not observe Daylight Saving Time, select DST : OFF (see “Clock” on pages 12 and 13).
Note to CABLE system installer: This re mind er is pro vid ed to call the CABLE (Cable TV) System Installers at ten tion to Article 820-40 of the NEC that pro vides guide lines for proper grounding and, in par tic u lar, specifi es that the cable ground shall be con nect ed to the ground ing system of the build ing, as close to the point of cable entry as practical.
Turn the unit Power on.
1
Press and hold both PLAY and on the unit for more than 5 seconds.
2
• The power will shut off.
Perform “Initial Setup” on page 10.
3
1111
Reset Language, Channels, Clock,
M A I N MENU
1
2
DVD
TV
SELECT : END : ACT I ON
Language Channels Clock
LOCK
CLOC
LANGUAGE
K
SET : SET
1) Press to
select language icon.
M A I N MENU
LANGUAGE
LOCK
DVD
CLOC
K
SET : SET
TV
SELECT : END : ACT I ON
Press ACTION*
to display MAIN MENU.
1
3
5
CH
1) Press to
select “CH.”
DVD
1
3
5
CH
TV
SELECT : END : ACT I ON
M A I N MENU
LOCK
CLOC
LANGUAGE
5
K
SET : SET
1
3
CH
2) Press SET.
2) Press SET
repeatedly.
MENU PR I NCIPAL
BLOQUEO
DVD
ELEG I R : TERM I NAR :
SEL. : FIN :
SELECT : END : ACT I ON
RELOJTV
F I
ACT I ON
For Spanish
MENU
BLOCAGE
DVD
HORLOGETELE
REGLER : SET
ACT I ON
For French
M A I N MENU
LOCK
DVD
CLOC
K
TV
For English
HOLA
ID I OMA
1
3
5
CANAL JAR : SET
BONJOUR
LANGUE
1
3
5
CANAL
HELLO
LANGUAGE
1
3
5
CH
SET : SET
SET UP CHA
ANT
ENNA
: CABLE
UTO SE
T
A W
EAK S I GNAL
SELECT : SET END
D I
: SET : ACT I ON
3) Press to select
“ANTENNA,” then press SET to set your antenna system (“TV” or “CABLE”).
4) Press to select
“AUTO SET,” then press SET.
• After Channel Auto Set is fi nished, Clock Auto Set will be performed. (If clock is set manually, Clock Auto Set will not be performed.)
NNE
SPLAY : OFF
L
1) Press to
select “CLOCK.”
M A I N MENU
LANGUAGE
LOCK
DVD
CLOC
TV
SELECT : END : ACT I ON
K
3
5
CH
SET : SET
1
2) Press SET.
SET CLOCK
AUTO CLOCK SET
MANU
AL
T I M
E ZONE AD
SELECT : SET
: SET
END
: ACT I ON
JUS
T :
0
(“TIME ZONE ADJUST”
appears only when auto clock is set.)
3)Press to select
“MANUAL,” then press SET.
(For Auto Clock Set, select “AUTO CLOCK SET,” and press SET.)
CLOC
K
SET
2 / 6/
2003
SELE CT
HOUR
SELECT : SET :
SET
START
:
ACT I ON
<Example MANUAL CLOCK SET screen>
:
THU
12
00
: ON
DST
BACK :
PM
3) Press ACTION
to exit.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
12
12
Continued on the next page.
*Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again.
Time Zone Adjust
4)Press and press SET to
select and set the month, date, year, time, and DST
(Daylight Saving Time)
.
To Make
Corrections,
repeatedly press
to move to error, then correct.
(Only when Auto Clock is set.)
1) Press to
select “CLOCK.”
M A I N MENU
LANGUAGE
LOCK
DVD
CLOC
TV
SELECT : END : ACT I ON
K
SET : SET
1
3
5
CH
2) Press SET.
SET CLOCK
NUMBER keys
ACTION ADD/DLT SELECT
SET
CH
Initial Setup
5)Press ACTION twice to start the clock and exit this mode.
AUTO CLOCK SET MANU
AL
T I M
E ZONE AD
SELECT : SET
: : ACT I ON
END
JUS
T :
3)Press to
select “TIME ZONE ADJUST” and press or
to subtract or
add hour(s) as necessary.
SET CLOCK
AUTO CLOCK SET MANU
AL
T I M
E ZONE AD
SELECT : SET
:
: ACT I ON
END
JUS
T :
4)Press ACTION
twice to exit.
• “TIME ZONE ADJUST” returns to “0” if clock is set manually.
0
Add or Delete a Channel
To add channel: Select channel with NUMBER keys and press ADD/DLT.
C
HANNEL
08 ADDED
+1
To delete channel: Select channel with CH or NUMBER keys and press ADD/DLT.
C
HANNEL
08 DELE T
ED
1313

Audio Connections

Enjoy the powerful movie theater and hall-like sound available with multiple channel audio found on DVDs by connecting an amplifi er and speakers. There are two types of connection, digital and analog.
Digital connection
Connect an amplifi er with Dolby Digital and DTS decoders to enjoy surround sound. You can also enjoy stereo sound with sampling frequencies of 48 kHz if the material is not copy-protected and the equipment you connect is compatible with these signals.
Firmly connect the cable to the connector.
OPTICAL
Analog connection
Connect an amplifi er to enjoy high-quality stereo sound with sampling frequencies of 96 kHz.
Speakers (example)
Connect three or more speakers for surround sound.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
14
14
Speakers (example)
Check List
Turn down the volume, then turn this unit, as well
as other equipment to be connected, off before pro ceed ing with connection.
Do not block ventilation holes of any equipment
and arrange them so that air can circulate freely.
Read through the instructions before connecting
other equipment.
Ensure that you observe the color coding when
connecting audio and video cables.
Enjoying digital audio output from the digital audio output con nec tor
Notes on audio output from the optical digital audio output con nec tor
Disc
recording format
Dolby Digital
Sound
DVD
Linear PCM (48/96 kHz 16/20/24 bit)
dts
Video CD MPEG 1
CD Linear PCM
MP3 MP3
WMA WMA
*1 The type of audio output from the connector can be
selected by the Settings for DVD Operation. (See page 47.)
*2 Sound having 96 kHz sampling is converted into
48 kHz sampling when it is output from the unit’s optical digital audio output connector.
For your reference:
• Dolby Digital is a digital sound compression technique developed by the Dolby Laboratories Licensing Corporation. Supporting 5.1-channel surround sound, as well as stereo (2-channel) sound, this technique enables a large quantity of sound data to be effi ciently recorded on a disc.
• Linear PCM is a signal recording format used in CDs. While CDs are recorded in 44.1 kHz/16 bit, DVDs are recorded in 48 kHz/16 bit up to 96 kHz/24 bit.
• If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefi t of Pro Logic from the same DVD movies that provide full 5.1 channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. For information on Panasonic or Technics Dolby Pro Logic Surround Sound Decoders please contact your local dealer.
Optical digital audio output from connector
Dolby Digital bitstream (1-5.1 ch) or PCM (48 kHz sampling/16 bit only)*
1
Linear PCM (2ch) (48 kHz sampling/16 bit
2
only)* Bitstream or PCM (48 kHz
sampling/16 bit only)*
1
PCM (44.1 kHz sampling)
Linear PCM (44.1 kHz sampling)
Linear PCM (It depends on the MP3 fi le)
Linear PCM (It depends on the WMA fi le)
IMPORTANT NOTE:
Caution for optical digital audio output connector:
• When connecting an amplifi er (with an Optical digital input connector) which does not contain the Dolby Digital or dts decoder, be sure to select “PCM” at “Dolby Digital” and “PCM” at “dts” of the Settings for DVD Operation “AUDIO OUTPUT” (see page 47). Otherwise, any attempt to play DVDs may cause such a high level of noise that it may be harmful to your ears and damage your speakers.
• When a dts decoder is connected, please select “Bitstream” at “dts” of the Settings for DVD Operation “AUDIO OUTPUT.” If “PCM” is selected, there will be stereo sound. (See page 47).
• Video CDs and CDs can be played as usual.
Note
• Some dts decoders which do not support DVD-dts Interface may not work properly with the unit.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and other world-wide patents issued and pending. “DTS” is a registered trademark of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights reserved.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade marks of Dolby Laboratories.
Initial Setup
1515

Basic DVD Operation

Check List
Cable or antenna is connected. Power cord is plugged in. If unit is connected to an audio amplifi er, turn
the stereo system’s power on.
OPEN/ CLOSE
POWER
SELECT
SET
10
STOP
SKIP-
PAUSE SEARCH
/SLOW
RETURN
Operation using unit buttons
Press PLAY.
3
Insert disc.
2
Press POWER.
1
*1Interactive DVD...
May include multiple camera angles, stories, etc.
2
Video CD with playback control...
*
Particular scenes or information can be interactively selected from a menu that appears on the screen.
2
Press OPEN/CLOSE.
5
DVD
NUMBER keys
MENU
PLAY SKIP+
TITLE
SEARCH/ SLOW
6
Press STOP.
Press POWER* on the remote or unit.
1
Insert a disc.
• If a disc is already inserted, go to step 3.
2
(Depending on the disc, playback may start automatically.)
1) Press OPEN/CLOSE.
2) Place disc into disc tray.
• Hold disc by its edges only (page
7) with printed side up and use guides to place into tray. Use 3(8 cm) or
1 2
Press PLAY to start play. Disc tray
closes automatically.
3
CLOSE
READING
If an interactive DVD*1 or a Video CD with playback control* used and a TITLE MENU appears, go to step 4.
T I TLE MENU
4
Using NUMBER key(s) starts play automatically.
The number of available titles varies with each disc. <Input Example>
1 digit number 1 ••• 1 2 digit number 12 ••• 10➞1➞2
3 digit number 123 •••100➞1➞2➞3
Press SKIP+ previous menu screen.
• SKIP function not available with all discs. Please refer to disc jacket for operation information.
To return to MENU (play stops) Press TITLE, MENU, or RETURN. (DVD) Press RETURN. (Video CD)
Press STOP to stop play.
Cas t l es
Dogs
Love
r
s
Dogs
of the world
<Example 2>
• You may also close the
tray by pressing OPEN/CLOSE.
• Data reading time differs with each disc.
2
is
B
i r
ds
|
or SKIP-
2
5 (12 cm) disc.
<Example 1>
T I TLE MENU
Dogs
Love
r
s
Press or NUMBER key(s)
(see below) to select title, and press SET or PLAY to start playing.
• “Pressing SET or PLAY” is not necessary when using NUMBER keys.
|
to go to next or
5
Press OPEN/CLOSE to eject the disc.
6
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
16
16
Cas t l es
B
i r
ds
1
*Important: I
f a remote control button does not work when pressed, press the DVD button on the
remote and try the button again.
Forward/Reverse rapid scene search
Press SEARCH/SLOW
SEARCH/SLOW
Press PLAY to release.
• Starting forward/reverse search during play started from menu on Video CDs may recall menu.
• Search speed, slow at fi rst, increases with each additional press of the button up to 5 levels.
or
during play.
Forward/Reverse Chapter/Track Skip
|
Press SKIP+
or SKIP-| during
play.
Each press skips a chapter (DVD) or track
(Video CD/CD).
Pressing SKIP- | once midway through a chapter/track returns to start of that chapter/track. Each additional press skips back one chapter/track.
Pressing SKIP+ | or SKIP-| during play
started from menu on Video CDs may recall menu.
Current playback position
Chapter/Track Chapter/Track Chapter/TrackChapter/Track
Reverse Skip Forward Skip
Still (Pause) Picture
➞ Press PAUSE during play.
Press PLAY to release
DVD/Video CD : The unit will enter Still picture mode.
CD : The unit will enter Pause mode.
.
Frame by Frame picture (DVD/Video CD)
Press PAUSE in Still mode.
Press PLAY to release.
• Each press advances picture one frame.
• Hold down for consecutive frame advance.
• Whether pictures are advanced by “FRAME” or
“FIELD” is selected automatically (see page 48).
Slow Motion picture (DVD/Video CD)
➞ Press SEARCH/SLOW or
SEARCH/SLOW
mode.
➞ Press PLAY to release.
• Slow motion speed, slow at fi rst, is increased with
each additional press of the button up to 5 levels.
• Reverse slow motion is not available for video CDs.
(DVD only) in Still
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit or the disc.
RESUME function
The unit memorizes the point where STOP is pressed.
Press PLAY to resume play from this point. Pressing STOP again or opening the tray cancels
RESUME, however, RESUME is not canceled when power is turned off and on.
• RESUME works only with discs for which elapsed
play time is displayed during play.
Auto-Power Off function
Power turns off after unit has been in Stop mode (DVD) for about 5 minutes.
Enjoy Video CDs featuring playback control without using menus (Video CDs only)
1. Do steps 1-3 (previous page).
When menu appears, press STOP.
2. Press NUMBER key(s) to select desired
track (play begins).
• Check disc for track numbers.
• Press “1” to start at beginning of disc.
To Resume Menu use, Press STOP, and press PLAY, then the menu
appears. Now, go to step 4 (previous page).
Notes
• Please read the disc jacket for operation information.
• If a single sided disc is placed in upside down, “THIS
TYPE OF DISC CANNOT BE PLAYED. PLEASE INSERT A DIFFERENT DISC” is displayed.
• Remove disc and press unit POWER off when not in
use.
• Disc continues to rotate with menu displayed even
after play is done. Press STOP to clear menu display when fi nished with menu.
DVD Operation
1717

TV Operation

Important:
*
If a remote control button does not work
when pressed, press the FM/TV button on the remote and try the button again.
Press POWER* on the remote or unit.
1
Use CH or
CH08
2
3
24
Using the 100 key
When selecting CABLE channels 100 to 125 with the NUMBER keys, fi rst press the 100 key, and then enter the remaining two digits.
NUMBER keys to select a channel.
Press VOL + or VOL - to adjust
volume.
Check List
Cable or antenna is connected. Power cord is plugged in.
CH
POWER
VOL +/VOL -
POWER RAPID
TUNE MUTE 100 Key
PHONES Jack
NUMBER keys
MENU
Rapid Tune
Press R-TUNE to display the last channel you
were watching.
Audio Mute
Press MUTE to instantly mute the sound. Press
again to restore the previous sound level.
Phones
Connect an earphone (not supplied) or headphones (not supplied) to the Phones Jack.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
18
18
CH
VOL+/-

MTS Broadcast/TV Stereo System

Equipped with -TV Noise Reduction for true MTS reproduction.
-TV Noise Reduction is required for good stereo separation and audio fi delity.
is a registered trademark, and
is licensed by
Technology
Licensing.
DISPLAY
AUDIO
Receivable Broadcast Types
The following are possible audio broadcast types and on-screen displays. The signal being received is indicated with an “
mark while the selected audio mode is indicated with an arrow. To change the audio mode for these broadcasts, see the “Audio Mode for TV Viewing” section below.
Press DISPLAY to display the broadcast signal being received.
STER SAP M
ONO
STER SAP M
ONO
STER SAP M
ONO
STER SAP M
ONO
1 2 : 0 0AM
EO
1 2 : 0 0AM
EO
1 2 : 0 0AM
EO
1 2 : 0 0AM
EO
CH08
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo (main language) and Secondary Audio Program (sub language) broadcasts are being received simultaneously. Select the STEREO or SAP audio mode.
CH08
MTS Stereo broadcast
Multi-channel Television Sound Stereo broadcast. Select STEREO audio mode.
• If stereo broadcast is weak and the display fl ickers, select MONO audio mode for possible improvement.
CH08
SAP broadcast
Secondary Audio Program (sub language). Select SAP audio mode for the sub language.
CH08
MONO broadcast
Normal monaural sound broadcast.
TV Operation
Audio Mode for TV Viewing
Press AUDIO to select the desired audio mode as described above.
(Arrow shows selection.)
• Each press of AUDIO will change the audio mode as shown below.
• “SAP” is selected with fi rst press of AUDIO.
< Example >
STER
Press AUDIO
EO SAP M
ONO
Press AUDIO
STER
EO SAP M
ONO
Press AUDIO
STER SAP M
ONO
EO
1919

Closed Caption System

Closed Caption is ...
This multi-use system not only allows the hearing impaired to enjoy selected programs, but also makes useful information from TV stations available to everyone.
Closed Caption Mode Feature
Press ACTION* to display MAIN MENU.
1
3
5
CH
UNER O
NT
1
1) Press to select
“TV.”
2) Press SET to
display SET UP TV screen.
1) Press to
select “CAPTION.”
2) Press SET to
display CAPTION screen.
1) Press to
select CAPTION MODE.
2) Press SET
repeatedly to select mode. (See left.)
2
SELECT : END : ACT I ON
CAPT I ON
I NPUT
3
SET UP V I DEO / AUD I DVD FM
SELECT : END
4
CAPT I ON MODE
CC ON MUTE
SELECT : SET : SET END
TEXT C2
M A I N MENU
LOCK
DVD
CLOC
TV
VOL ADJUST : + 2
ANT
: ACT I ON
: ACT I ON
OFF
K
SET
UP TV
SELECT : T
ENNA : I
CAPT I ON
:
:
CAP C1
CAP C2
LANGUAGE
SET : SET
SET : SET
CAP C1
CAP C1
TEXT C1
Closed Caption Mode Selections
Caption Mode: CAP C1 or C2
A narration of selected TV programs is displayed. Check TV program listings for CC (Closed Caption) broadcasts.
Caption Mode: TEXT C1 or C2
Most of the screen will be blocked out. When the TV station broadcasts information, such as program listings, it will appear in this space.
Caption Mode: OFF
Closed Caption/Text narration will not be displayed.
Note
• The closed caption or text signal may be broadcast over C1, C2, or both. Also, text contents can vary so you may wish to try different settings.
Press ACTION three times to return to the normal screen.
5
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
20
20
Loading...
+ 44 hidden pages