
PEC
S
F
ILE
Product Number :
Product Name :
PT-TW340
LCD Projectors
As of May 2014. Specifications and appearance are subject to change without notice.
SFL14M010
1/8

LCD Projectors
Specifications
Main unit
Power supply
Power consumption
LCDpanel Panel size
Display method
Drive method Active matrix method
Pixels
Pixel configuration
Lens
Throw ratio 0.46:1
Lamp
Screen size
Colors
Brightness*
Center-to-corner uniformity*
Contrast*
2
2
2
Resolution
Optical axis shift
Keystone correction range
Installation
Built-in speaker
Output power
Terminals HDMI IN
COMPUTER (RGB) 1IN
R, G, B
Y, PB (CB), PR (CR)
S-VIDEO
COMPUTER (RGB) 2 IN / 1 OUT
R, G, B
VIDEO IN
AUDIO IN 1
AUDIO IN 2
AUDIO OUT
SERIAL IN
LAN
USB
AC100–240V 3.5A 50/60 Hz
300W
6W when Standby mode set to Normal,
0.5W when Standby mode set to Eco*
15.0 mm (0.59 inches) diagonal (16:10 aspect ratio)
Transparent LCD panel (× 3, R/G/B)
1,024,000 (1,280 ×800) × 3, total of 3,072,000 pixels
Stripe
Fixed zoom, manual focus F1.8 f 6.08mm
230 W UHM lamp
50–100 inches (1.27– 2.54 m) diagonally, 16:10 aspect ratio
Full color (16,777,216 colors)
3,200 lumens (
80%
10,000:1 (full on/full off, Iris ON)
1,280 × 800 pixels (Input signals that exceed this resolution will be
converted to 1,280 × 800 pixels.)
7.2:-1 (fixed)
Vertical: ±15°, horizontal: ±15°
Ceiling/floor, front/rear (menu selection)
10 W (monaural)
HDMI 19-pin ×1, HDCP and Deep color compatible
480i (525i)*
720 (750)/50p, 1080 (1125)/60i, 1080 (1125)/50i, 1080 (1125)/25p,
1080 (1125)/24p, 1080 (1125)/24sF, 1080 (1125)/30p, 1080 (1125)/60p,
1080 (1125)/50p,
VGA (640 × 480)–WUXGA*
Audio signal: linear PCM
(sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
D-sub HD 15-pin (female) ×1
R, G, B: 0.7 Vp-p, 75 ohms;
HD/VD, SYNC: high impedance, TTL (positive/negative automatic)
Y: 1.0 Vp-p (including sync signal), 75 ohms
B (CB), PR (CR): 0.7 Vp-p, 75 ohms
P
Y: 1.0 Vp-p; C: 0.286 Vp-p, 75 ohms
NOTE: D-Sub -S video conversion cable (ET-ADSV) is required.
D-sub HD 15-pin (female) ×1
NOTE: Input/output is selected using the menu. When output is selected, signals from
COMPUTER (RGB) 1 IN are output.
R, G, B: 0.7 Vp-p, 75 ohms;
HD/VD, SYNC: TTL (positive/negative automatic)
Pin jack × 1, 1.0 Vp-p, 75 ohms
M3 (L, R) ×1, 0.5 Vrms
Pin jack ×2 (L, R x 1), 0.5 Vrms
M3 (L, R) ×1 (monitor out: 0–2.0 Vrms, variable)
D-sub 9-pin (female) × 1, for external control (RS-232C compliant)
RJ-45 × 1, for network connection, complian
100Base-TX/10Base-T
USB A (type A) connector × 1, for Memory Viewer
USB B (type B) connector × 1, for USB Display
PT-TW340
1
LAMP POWER: NORMAL)
3
, 576i (625i)*3, 480p (525p), 576p (625p), 720 (750)/60p,
4
(1,920 ×1,200),
t with PJLink™,
(Out put 5V MAX 500mA)
As of May 2014 2/8
SFL14M010

LCD Projectors
PT-TW340
Power cord length
Cabinet materials
Dimensions (W ×H×D)
6
Weight*
Operation noise*
2
Operating temperature
Operating humidity
Storage temperature
Storage humidity
Remote control unit
Power supply
Operation range*
7
Dimensions (W × H × D)
Weight
Supplied accessories
3 m (9 ft 10 in)
Molded plastic
335× 134.1*
(13-3/16 × 5-1/4*
5
× 329 mm
5
× 12-15/16 inches)
Approx. 3.8 kg (8.38 lbs)
37 dB (Lamp power: Normal), 33 dB (Lamp power: Eco1)
28 dB (Lamp power: Eco2)
5°C–40°C (41°F–104°F) [at less than 1,400 m (4,500 ft.) above sea level]
5°C–35°C (41°F–95°F) [at 1,400 m to 2,700 m (4,500 ft. to 8,800 ft.)
above sea level]
20%–80% (no condensation)
-20°C–60°C
10%–80%
3 V DC (R03/LR03/AAA type battery × 2)
Approx. 5 m (16 ft 5 in) when operated from directly in front of the
signal receptor
44 × 105 × 20.5 mm (1-23/32 × 4-1/8 × 13/16 inches)
Approx. 63 g (2.22 oz) (including batteries)
)1 (× 2 for PT-TW340E) ×( droc rewoP
Wireless remote control unit (× 1)
Batteries for remote control (R03/LR03/AAA type × 2)
Computer signal cable 1.5 m (4 ft 11 in), VGA cable (× 1)
Software CD-ROM (Instruction Manual, Multi Projector Monitoring and
Control Software) (× 1)
Optional accessories
Ceiling mount bracket
Ceiling mount bracket
Projector mount bracket
ET-PKL100H (for high ceilings)
ET-PKL100S (for low ceilings)
ET-PKL430B
D-SUB - S Video conversion cableET- ADSV
Replacement lamp unit
Replacement filter unit
Weights and dimensions shown are approximate. Specifications subject to change without notice.
1When the Standby mode is set to Eco, network functions such as power on over the LAN network will not operate. Also, only certain com-
*
mands can be received for external control using the serial terminal.
2Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*
3 Only compatible with dot clock frequency of 27MHz (pixel repetition signal)
*
4 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*
5 With legs at shortest position.
*
6 Average value. May differ depending on models.
*
7Operation range differs depending on environments.
*
ET-LAL500
ET-RFL300
As of May 2014 3/8
SFL14M010