PT-RZ970/RW930/RX110 Series
PT-RZ770/RW730 Series
PT-RZ660/RW620 Series
Unleash the Power of Your Imagination
Page 2
Engineered for Elite Marathon Performance in
Permanent or Temporary Installations
With immersive picture quality and practical features, potential
application for Panasonic’s PT-RZ970 Series projectors extends
from permanent installation in museums, theaters, and control
rooms through roles in exhibition/rental and staging. Powered by
the acclaimed SOLID SHINE Laser drive and latest 1-Chip DLP™
technology, these projectors exceed expectations with
low-maintenance stability and vivid color performance
maintained for longer than competitive products over years of
dependable 24/7 operation. The PT-RZ970 Series: made by
professionals, for professionals.
EVENTS
High Picture QualityEconomical
PT-RZ970/L
Resolution
Brightness
Contrast
* Measure d according t o strict internat ional ISO 21118 standards. N ote: PT-RZ970 L / RZ770L / RZ 660L / RW930 L / RW730L / RW 620L / RX110L do not inclu de a lens.
2
Quick Start and Quick OffFree 360° Install
PT-RZ970/RW930/RX110 SeriesPT-RZ770/RW730 SeriesPT-RZ660/RW620 Series
PT-RW930/LPT-RX110/L
WXGAXGA
10,000 lm (Center)
9,400 lm*
10,400 lm (Center)
10,000 lm*
Dust-Resistant Optics
PT-RZ770/L
7,200 lm (Center)
10,000:1
7,000 lm*
PT-RW730/L
WXGA
PT-RZ660/L
20,000 hours*
Maintenance free
PT-RW620/L
6,200 lm (Center)
6,000 lm*
1
WXGAWUXGAWUXGAWUXGA
Page 3
BUSINESS
See the Advantages of Panasonic’s Laser Technology
MUSEUMS
See the Advantages of Panasonic’s Laser Technology
SOLID SHINE Laser and DLP™ Projection Balances Image Quality with
20,000-hour Maintenance-free*
Harnessing Full-Spectrum Color with
Up to 10,400 lm (Center)
With next-generation DLP™ technology delivering
high-resolution detail and dual laser modules outputting up to
10,400 lm (Center)*
to reduce energy loss from the light source, and robust
heat-resistant phosphor wheel, the Panasonic SOLID SHINE
Laser system produces scintillating images with unfailing
reliability.
100 %
2
of brightness, Quartet Color Harmonizer
Comparison of Color Brightness
2
*
Brightness
1
Endurance
Superior White Balance and
Color Reproduction
The Quar tet Color Harmonizer wheel mechanism captures a
wider color space than comparable projectors, which allows
white to be reproduced realistically on screen. Some
conventional projectors can’t achieve an accurate white
balance, so images can appear with a distracting greenish
tint. Not the case with Panasonic SOLID SHIN E Laser
projectors.
SOLID SHINE Laser Maintains Picture
Quality for Longer
Thanks to the long-lasting dual solid-state laser modules,
there are no lamps to replace, and image color/brightness
degrades ver y gradually in consistent, linear fashion. A s well
as reducing maintenance hassle, out-of-the-box picture
quality is preserved longer.
Brightness Deterioration Comparison
EDUCATION
Color
Brightness
Light Energy
Lamp-based
1-Chip DLP projectors
*1 At thi s time the brightnes s will have decreased t o approximately hal f of its original leve l (Dynamic Cont rast Mode: 3, Imag e Mode: Dynamic). Pa nasonic recommend s cleaning or checkup a t point of purchase a fter about 20,0 00 hours. Ligh t source
lifetime may b e reduced depending o n environmental co nditions. Repla cement of parts ot her than the light so urce may be required in a shorter period.
*2 PT-R Z970/RW9 30 features 10,00 0 lm, PT-RZ770 /RW730 7,20 0 lm, PT-RZ660 /RW620 6,2 00 lm, and PT-RX110 10,40 0 lm of brightness (me asured at center of s creen).
The PT-R Z970 Series directly modulates laser power output to achieve high contrast
with low power consumption. Digitally controlled frame-by-frame scene-linking
modulation ensures highly precise output adjustment, while accurate
3
10,0 00:1*
contrast is delivered even when bright and dark scenes frequently
interchange.
Dust-Resistant Airtight Optical Block
The PT-R Z970 Series’ optical block is airtight, ensuring consistent, long-lasting image
quality for up to 20,000 hours*
stringent testing to assure utmost reliability in environments with up to 0.15 mg of
particulate matter per cubic meter (based on American Society of Heating,
Refrigerating, and Air-Conditioning Engineers [ ASHRA E] and Japanese Building
Maintenance Association guidelines). The structure prevents brightness degradation
from dust intrusion.
Clean Environment
4
without maintenance. The optical block design passed
Japanese Building
Maintenance
WHO Euro pe
Guideline for
Dust Resistance
Association
ASHRAE
(Ameri can Society of
Heating, R efrigerating , and
Air-Conditioning Engineers)
Bright Image
Dark Image
Detail Clarity Processor 3 Sharpens the Finest Details
This unique Panasonic circuit optimizes the sharpness of each image based on the
super high, high, medium, and low frequency components of the extracted image
information. The resulting images are expressed with natural, convincing realism.
Conventional Projector
Detail Clarity Processor 3
System Daylight View 3 for Sharp and Vivid Images
in Bright Environments
Panasonic’s premium System Daylight View 3 prevents images from washing out in
well-lit environments and enhances brightness perception in multi-projector mapping
applications by adjusting sharpness and gamma curves and correcting colors. The
result is greater visual impact even in challenging conditions.
In Normal Mode, the P T-RZ970 Series can operate continuously for about 20,00 0
4
hours*
. In Eco Mode, this is extended to around 24,0 00 hours*4 of continuous
operation. These modes enhance suitability for education and signage applications.
Up to 10 Years*5 Operation with
Constant Brightness Modes
In environments where full brightness is not necessary, such as surveillance, control,
and simulation rooms, constant operation modes extend light-source replacement to
up to 87,600 hours*
consistent brightness and color.
5
in Long Life 3 Mode—about 10 years of 24/7 projection —with
Conventional ProjectorSystem Daylight View 3
User Operating Mode
In addition to preset operating modes, the PT-RZ970 Series can be customized to
achieve your preferred balance of brightness performance or extended life.
Consistent, Stable Performance
Stable 24/7 Operation with Light-source
Failover Protection
Dual Drive Laser Optical Engine groups laser
diodes into two discrete modules. A failsafe
redundancy circuit works to minimize
brightness- and color-uniformit y loss should
a laser diode fail, making the PT-R Z970 Series
ideal for mission-critical applications. Further,
brightness decreases more gradually and
consistently than lamp-based projectors over
a 20,000-hour*
projection period.
*3 With D ynamic Contras t Mode set to 3. *4 At this t ime the brightnes s will have decreased t o approximately hal f of its
original le vel (Dynamic Con trast Mode: 3, Ima ge Mode: Dynamic). Pa nasonic recommen ds cleaning or checkup a t point
of purchas e after about 20 ,000 hours. Li ght source lifetim e may be reduced dependi ng on environmenta l conditions.
Replaceme nt of parts other t han the light sourc e may be required in a shor ter period.
4
4
maintenance-free
*5 With Op erating Mode set t o Long Life 3. Long L ife Mode is tested i n a rear-box projectio n environment, whi ch is not
compliant w ith ASHRA E. 24 hours/day x 3 65 days/year x 10 yea rs = 87,600 hours. Repl acement of parts o ther than the
light source may be required in a shorter period.
Long Life
Mode
About 87,600 hours
Normal
Mode
About
20,000 hours
User Operating
Mode
Can be cus tomized
Page 5
Versatile Installation Flexibility
Unique Contrast Sync and
Shutter Sync Function
The PT-R Z970 Series is among the world’s
rst to feature Contrast Sync and Shutter Sync
functions (Patent Pending) for multi-screen
and mapping applications. Contrast Sync
allows the projectors’ digitally modulated
contrast function to be synchronized over the
network for consistent picture quality across
screens, while Shutter Sync incorporates a
master/slave principle to synchronize shutter
on/off timing bet ween all networked
projectors. It includes simultaneous fade-in
and fade- out functions.
Note: Use o f RS-232C stra ight cable is neces sary for all conne ctions.
Consult y our sales represen tative for furt her information .
Contrast Sync
Projector AProjector BProjector A
Average: 5 %Average: 15%Average: 10 %
Image luminance of all projectors is averaged for unified Dynamic Contrast, rather than each unit setting Dynamic Contrast
separately. Step noise is eliminated in edge-blended areas.
If shutter functions are not linked, shutter ON/OFF timing varies. When shutter functions of slave projectors are linked to a
master, shutter ON/OFF timing is uniform*.
* Includes f ade-in and fade- out effects. P rojector shut ter functions ca n be set to operate indi vidually if desire d.
RS-232C cable
Unit 1
Unit 2
Unit 3
Unit 64
Up to 64 projectors can be connected
Projector B
Geometric Adjustment for Custom Screen Surfaces
Geo Adjustment adapts the image for projection onto spherical, cylindrical, and other
specially shaped screens. Fine-tuning is per formed with the remote control, with no
external equipment needed. Paired with Multi-Screen Support System, highly creative
mapping presentations are possible in variety of event and s taging applications.
Vertical, Horizontal, and Corner Keystone Correction
Vertical4 CornersHorizontal
Curved Screen Correction
Horizontal ARCVertical ARC
Geometry Manager Pro Software (PT-RZ970/RZ770/RZ660 Only)
Geometry Manager Pro software expands built-in functionality and makes complex
adjustments easy. The free sof tware package includes enhanced color matching
and edge blending for multi-screen projection and adjustment of multiple screens
over the network.
Optional ET-UK20 Upgrade Kit for
Geometry Manager Pro
An optional ET-UK20 Upgrade K it for Geometry Manager Pro adds creative masking
capabilit y using four lines or bitmap data as well as uniformity correction and
correction area expansion.
Line Masking
(PT-RZ970/RZ770/RZ660 Only)
Bitmap Masking
Multi-Screen Support System Seamlessly
Connects Multiple Screens
Edge Blending
Color Matching
Projector AProjector B
Edges of adjacent screens can be blended and their luminance
controlled.
Corrects for slight variations in the color reproduction range of
individual projectors. PC soft ware assures easy, accurate control.
Color matching
Projector AProjector B
Without edge blendingWith edge blending
Multi-Unit Brightness and Color Control
This function automatically corrects brightness and color uctuations that occur
over time in individual projectors in a multi-screen system. Control up to eight
projectors connected via hub increasing to a maximum of 2,048 projectors with
Multi Monitoring & C ontrol Software.
Projector AProjector B
Without Multi-Unit Brightness and Color ControlWith Multi-Unit Brightness and Color Control
Projector AProjector B
Create masking dataUse to overlap projected imageImage projected only
in designated areas
Optional ET-CUK10*6 Series Auto Screen
Adjustment Upgrade Kit
This optional kit activates the Auto Screen Adjustment plug-in software for Geometr y
Manager Pro, allowing you to set up multiple projectors automatically and simultaneously
and save signicant amounts of time and money. Per forming multi-screen and
curved-screen projection calibration in three quick steps using a camera*7 and PC
connected to the projector network, this software encompasses geometric adjustment,
edge blending, color matching, stacking, brightness, and black level.
*6 Availabl e worldwide except th e United States . *7 Supported ca meras: Nikon D520 0/D530 0/D5500.
(PT-RZ970/RZ770/RZ660 Only)
Reduce Inventory Costs with Shared Lenses
The PT-R Z970 Series shares optional lenses with the Panasonic 1-Chip DL P™
projector range, including the ET-DLE030 Ultra-Short-Throw Lens and ET-DL E085
Zoom Lens for long throw distances, reducing TCO for staging and event companies
with large projector inventories. Lenses attach and det ach with one-touch ease.
5
Page 6
Easy System Flexibility
Single-Cable DIGITAL LINK Control and
Video Connection
Upward HDBaseT™-compatible DIGITAL LINK supports
transmission of uncompressed Full HD video and control
commands through a single CAT 5e or higher STP cable for
distances of up to 150 m (492 ft)*
Switcher or Digital Interface Box to further simplify installation in large venues while
reducing cost and improving reliability at the same time.
*8 150 m (492 f t) transmission a vailable only in Long Re ach Mode with optio nal ET-YFB200G D IGITAL LIN K
Switche r for signals up to 1080/ 60p (dot-clock fre quency 148.5 MHz). Tran smission distance i s up to 100 m (328
ft) in other cases.
8
. Add an optional DIGITAL LINK
Backup Input Setting Optimizes Performance
This feature allows smooth switching to a backup input signal should the primary signal
be disrupted*
mapping, staging, and in other applications where image display must be maintained.
*10 Combina tion of prim ary/sec ondary in put termina ls is xed. T he Backup I nput Set ting is enab led only
when the inpu t signal to t he primar y and second ary term inals is the s ame.
10
, guaranteeing reliability for mission-critical control rooms, projection
Conventional System
Multiple-unit widescreen projection
!
k
n
a
l
b
l
a
l
y
i
t
r
a
P
Backup Input Setting
Multiple-unit widescreen projection
ET-YFB200G
PC
DIGITAL LINK 1
DIGITAL LINK 2
Blu-ray Disc
player
CAT5e (STP) cable or higher
(Up to 150 m/492 ft)
Document
camera
VCRPC
Free 360-degree Rotation
Projection is possible in any direction
vertically and horizontally, and the unit
can be rotated 36 0 degrees for
installation at any angle.
Vert ical
360 °
Horizontal
360 °
Supports Art-Net DMX, Crestron Connected™,
and PJLink™
The PT-R Z970 Series is compatible with Ar t-Net DMX protocol for lighting
management. This allows the projector to be connected to a lighting console, opening
the door to a range of added functionalit y and control options. The included
LAN/DIGI TAL LI NK terminal also supports Crestron Connected™ and PJLink™
(Class 1) for easy integration of these projectors into an existing AV network utilizing
multiple device brands.
Quick Start and Quick Off
The laser light-source doesn’t require any warm-up, so images appear almost
instantly (in about 1 second*
cool-down period needed when turning the power of f at the mains—the projector can
be turned on and off any time as necessar y.
*9 With Q uick Startup M ode set to ON. Quick S tartup Mode r esets to OFF af ter duration set in Av ailable Period expir es.
When Quick S tartup Mode i s set to ON, the proje ctor continues t o warm up, increasing po wer consumption. I mage
appears in a bout 9 seconds on N ormal Standby Mo de and about 12 seconds o n Eco Standby Mod e.
9
) with PT-RZ970 Series projectors. There’s also no
Primary source
Source
If the main input signal is disrupted,
image display is cut off
Switch quickly
Secondary source
If primary signal is disrupted, back-up signal
smoothly engages to maintain image display
Web Browser Control
These Panasonic SOLID SHINE Laser projectors can be easily operated remotely over
a LAN network via a computer’s web browser. Projectors can be congured to alert
the operator via email if an error has occurred.
Early Warning Software ET-SWA100 Series (Optional)
Early Warning Sof tware monitors the st atus of projectors and displays connected to
an intranet, and informs the operator when an abnormalit y is detected or predicted,
or when there are symptoms of trouble. This minimizes downtime to provide more
stable operation.
Other Valuable Features
• DICO M Simulation Mode offers
easy-to-view X-ray photo reproduction*
• Rec. 709 m ode for HDTV pr ojecti on to
provide accurate colors
• Waveform M onitor f or simple yet precise
calibration
• Lens-c entered design and a wide
horizontal/vertical lens shift
• Shutt er effect with f ade in/ fade out
(congurable in 0.5-seco nd inter vals
from 0.5 to 4.0 seconds, or to 5 -, 7-, or
10-second intervals)
• PJLink™ compatibilit y
• P-in-P f unctio n*
• Image rot ation function
• On-screen menu r otatable in Por trait Mode
Terminals
12
1
2
• Scheduling function
• 30 m (98 f t) long-range wireless r emote
control
11
• Anti-t heft features including chain
opening and security bar
• Customizable start-up logo
• ID assig nment for up to 64 unit s
• Built-in te st pat tern
• Select able 10-language on-scree n menu
(English, Germa n, French , Spanish,
Italian, Portuguese, Russian, Japanese,
Chinese, Korean)
• RoHS Directive-compliant
*11 This produ ct is not a medical ins trument. Do not
use for act ual medical diagnos is. *12 The
Picture -in-Picture f unction cannot be u sed with
certain inputs and input signals.
Terminals for PT-RZ970/RZ770/RZ660 shown.
3
Multi Monitoring & Control Software
This free Panasonic software offers monitoring and control of up to 2,048 devices
over a LA N network from a single PC. For monitoring, status for individual devices can
be listed in groups, with more detailed information shown separately. Control
functions include power ON/OFF, input switching, scheduling, and command inputs.
*1 Optical axis shift cannot be operated when using ET-DLE055. *2 Optical axis is xed to center when using ET-DLE030.
Dimension Denitions
If using lens other than the ET-DLE030
Screen top
Screen
A
A
Screen bottom
Dimensions
200 (7-7/8)
498 (19-19/32)
Projector
Projector
If using the ET-DLE030
Screen top
Screen
Screen bottom
538 (21-3/16)
(Without lens)
581 (22-7/8)
E
C
D
B
A
A
B
D
C
E
unit: mm (inc hes)
7
Page 8
Specications
Model
Power supply
Power consumption
DLP™ chip
Lens
Light source
Screen size (diagonal)
Brightness
Center-to-corner uniformity*
Contrast*
Resolution
Scanning
frequency
Optical
axis shift*
Keystone correction range
Keystone correction range
with optional Upgrade Kit ET-UK20
Installation
TerminalsSDI IN
Cabinet materials
Dimensions (W × H × D)
Weight*7
Operation noise*
Operating environment
Applicable software
Supplied accessories
Note: The PT-RZ970L/RZ770L/RZ660L/RW930L/RW730L/RW620L/RX110L delivers the same performance as the PT-RZ970/RZ770/RZ660/RW930/RW730/RW620/RX110, but comes without a lens.
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. *2 Measured at center area of projector screen. Measurement method is in compliance with ISO/IEC 21118: 2012. Value is average of all products when shipped.
May differ depending on actual unit. *3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal). *4 WUXGA resolution is supported with CVT-RB signals (WUXGA60RB) and CVT signals (WUXGA50). *5 Optical axis shift is not supported on the ET-DLE055, and the optical
axis is xed with the ET-DLE030. *6 With legs at shortest position. *7 Average value. May differ depending on the actual unit. *8 When used in locations from 0 m to 4,200 m (0 ft to 13,780 ft) above sea level in Normal Mode, and from 0 m to 2,700 m (0 ft to 8,858 ft) above sea level in
other modes. If the ambient temperature exceeds 35 °C (95 °F) [30 °C (86 °F) for PT-RZ970/RW930/RX110] when used in locations from 0 m to 2,700 m (0 ft to 8,858 ft) above sea level, or if it exceeds 25 °C (77 °F) when used in locations from 2,700 m to 4,200 m (8,858 ft to 13,780 ft)
above sea level, the light output may be reduced to protect the projector. *9 Available only with PT-RZ970/RZ770/RZ660. *10 Available only with PT-RZ970/RZ770/RZ660. Available worldwide except the United States.
Panel size
Display method
Pixels
1
1
SD-SDI
HD-SDI
3G-SDI
HDMI/DVI-D/DIGITAL LINK
RGB
YP
BPR (YCBCR)
Video/YC
Vertical
(from center of screen)
5
Horizontal
(from center of screen)
HDMI IN
DVI-D IN
RGB 1 IN
RGB 2 IN
SERIAL/MULTI PROJECTOR SYNC IN
SERIAL/MULTI PROJECTOR SYNC OUT
REMOTE 1 IN
REMOTE 1 OUT
REMOTE 2 IN
LAN/DIGITAL LINK
1
PT-RZ970/RZ770/RZ660
AC 100–240 V, 50/60 Hz
[PT-RZ970/RW930/RX110] 1,050 W, Normal*: 742 W, Eco*: 617 W, Long Life 1*: 410–588 W, Long Life 2*: 375–588 W, Long Life 3*: 349–588 W, Shutter*: 82 W; [PT-RZ770/RW730] 825 W, Normal*: 593 W, Eco*: 508 W,
Long Life 1*: 333–477 W, Long Life 2*: 310–477 W, Long Life 3*: 286–477 W, Shutter*: 72 W; [PT-RZ660/RW620] 700 W, Normal*: 499 W, Eco*: 428 W, Long Life 1*: 287–402 W, Long Life 2*: 262–402 W,
Long Life 3*: 238–402 W, Shutter*: 69 W; [Common] Standby: 85 W with Quick Startup Mode set to ON, 0.2 W with Standby Mode set to Eco, 3 W with Standby Mode set to Normal
*In conditions with an operating temperature of 25 °C [77 °F], altitude 700 m [2,297 ft], IEC62087: 2008 Broadcast Content, Picture Mode: Standard, Dynamic Contrast: 2.
17.0 mm (0.67 in) diagonal (16:10 aspect ratio)
DLP™ chip × 1, DLP™ projection system
2,304,000 (1920 x 1200) pixels
Powered zoom (throw ratio 1.7–2.4:1),
powered focus F 1.7–1.9, f 25.6–35.7 mm
Laser diodes laser Class 1 (Class 3R for US models), light source life*1: 20,000 hours (Normal Mode) / 24,000 hours (Eco Mode). At this time the brightness will have decreased to approximately half of its original level.
1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE030, 16:10 aspect ratio (except PT-RX110), 4:3 aspect ratio (PT-RX110)
Vertical: ±40 ° (±22 ° with ET-DLE085/DLE055, +5 ° with ET-DLE085/DLE055/DLE030),
horizontal: ±15 ° (Cannot be operated with ET-DLE085/DLE055/DLE030)
Vertical: ±45 °(±40 ° with ET-DLE150/DLE250/supplied lens, ±22 ° with
ET-DLE085/DLE055), horizontal: ±40 ° (±15 ° with ET-DLE085/DLE055),
Up to a total of ±55 ° during simultaneous horizontal and vertical correction.
HDMI 19-pin × 1 (Deep Color, compatible with HDCP)
DVI-D 24-pin × 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
RGB × 1 (BNC × 5): RGB/YPBPR/YCBCR/YC/VIDEO
D-sub HD 15-pin (female) × 1: RGB/YPBPR/YCBCR
D-sub 9-pin (female) × 1 for contrast sync/shutter sync/external control (RS-232C compliant)
D-sub 9-pin (male) × 1 for contrast sync/shutter sync/RS-232C link control
M3 × 1 for wired remote control
M3 x 1 for link control (for wired remote control)
D-sub 9-pin (female) × 1 for external control (parallel)
RJ-45 × 1 for network, DIGITAL LINK connection, 100Base-TX, compatible with Art-Net, PJLink™, Deep Color, HDCP
Molded plastic
498 x 200*6 x 581 mm (19 19/32˝ x 7 7/8˝*6 x 22 7/8˝ ) (with supplied lens)
6
498 x 200*
x 538 mm (19 19/32˝ x 7 7/8˝*6 x 21 3/16˝ ) (without lens)
PT-RZ970/RW930/RX110/RZ770/RW730: Approx. 23.2 kg (51.1 lbs.) (with supplied lens), Approx. 22.4 kg (49.4 lbs.) (without lens)
PT-RZ660/RW620: Approx. 23.1 kg (50.9 lbs.) (with supplied lens), Approx. 22.3 kg (49.2 lbs.) (without lens)
PT-RZ970/RW930/RX110: 41 dB, PT-RZ770/RW730: 37 dB, PT-RZ660/RW620: 35 dB
Operating temperature: 0–45 °C (32–113 °F)*8, operating humidity: 10–80 % (no condensation)
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro*9 (ET-UK20*9 Upgrade Kit and ET-CUK*
Power cord, wireless/wired remote control unit, batteries (R03/AAA type x 2), software CD-ROM (Logo Transfer Software, Multi Monitoring & Control Software), projection lens cover, lens cover (models with lens only)
1
1
1
BCR 4:2:2 10-bit] 480i (525i), 625i (576i)
BPR 4:2:2 10-bit] 750 (720)/60p,
BPR 4:2:2 10-bit]
4
(1920 x 1200) (compatible with non-interlaced signals only), dot clock: 25–162 MHz
The cabinet for each model is available in black or white.
Weights and dimensions shown are approximate. Specications and appearance are subject to change without
notice. Product availability differs depending on region and country. This product may be subject to export control
regulations. DLP, DLP logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments.
HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries. The PJLink trademark is an application trademark in Japan,
the United States, and other countries and regions or registered trademarks. All other trademarks are the property of
their respective trademark owners.