For High-Impact
Images in Any Space,
We Have the Answer
EVENTS
Black models
(With supplied lens)
White
models
Applications for our 6,000–10,000-lumen RZ970 Series laser
projector lineup extend from education, exhibition, and
signage through to events and staging. With a shared design
philosophy, these compact 1-Chip DLP™ projectors deliver
picture quality approaching that of our 3-Chip DLP™ models
while retaining flexibility for a stress-free installation. The
series not only leads the field in outright image quality; it also
provides the stable, consistent, low-maintenance performance
that professional users demand.
High Picture QualityQuick Start and Quick Off
Free 360° Install
MUSEUMS
BUSINESSEDUCATION
NEW
PT-RZ970 SeriesPT-RZ870 SeriesPT-RZ770 SeriesPT-RZ660 Series
PT-RZ970 PT-RZ970L PT-RW930
WXGAXGAWUXGA
10,000 lm (Center)*1
9,400 lm
10,000 : 1
PT-RW
930L PT-RX110 PT-RX110L
10,400 lm (Center)*
10,000 lm
PT-RZ870PT-RZ870L
WUXGA
1
8,800 lm (Center)*
8,500 lm
10,000 : 1
1
PT-RZ770PT-RZ770L PT-RW730
7,200 lm (Center)*
7,000 lm
10,000 : 1
PT-RW
730L
WXGAWUXGA
1
PT-RZ660PT-RZ660L PT-RW620
6,200 lm (Center)*
6,000 lm
10,000 : 1
PT-RW
620L
WXGAWUXGA
1
Dust-Resistant Optics
* At this time, brightn ess will have d ecreased to about h alf its or iginal level (Dynamic Contr ast: Mo de 3,
Image Mode: Dynamic). Panasonic recommends cleaning or checkup at point of purchase after about
20,000 hours. Light source lifetime may be reduced depending on environmental conditions.
Replacement of parts other than the light source may be required within a shorter period.
Economical
20,000 hours*
Maintenance free
With
supplied
lens
Without
lens
With
lens
Without
lens
supplied
Black / White cabinetBlack / White cabinet
With
supplied
lens
Without
lens
With supplied lensWithout lens
With
supplied
lens
*1 The val ue of the ligh t output a t the cente r region of t he projected image is ex tracted based on t he light output meas urement method defined by the ISO/IEC 21118:2012 international standards.
The Quartet Color Harmonizer wheel mechanism captures a wider color space
than comparable projectors, which allows white to be reproduced realistically on
screen. Some conventional projectors can’t achieve an accurate white balance,
so images can appear with a distracting greenish tint. Not the case with
Panasonic SOLID SHINE Laser projectors.
Y B G RPure white
Dynamic Contrast Function for High Contrast
The RZ970 Series directly modulates laser power output to achieve high contrast
with low power consumption. Digitally controlled frame-by-frame scene-linking
modulation ensures highly precise output adjustment, while accurate 10,000:1*1
contrast is delivered even when bright and dark scenes frequently interchange.
Bright Image
Detail Clarity Processor 3 Sharpens the Finest Details
This unique Panasonic circuit optimizes the sharpness of each image based on the
super high, high, medium, and low frequency components of the extracted image
information. The resulting images are expressed with natural, convincing realism.
Conventional
Projector
Dark Image
Detail Clarity
Processor 3
Consistent, Stable Performance
Stable 24/7 Operation with Light-Source
Failover Protection
Dual Drive Laser Optical Engine groups laser diodes into two
discrete modules. A failsafe redundancy circuit works to
minimize brightness- and color-uniformity loss should a
laser diode fail, making the RZ970 Series ideal for
mission-critical applications. Further, brightness decreases
more gradually and consistently than lamp-based projectors
over a 20,000-hour*
SOLID SHINE Laser Maintains Image Quality Longer
Two long-lasting solid-state laser modules ensure the image-color and brightness
ramp is gradual, declining slowly and consistently over a far longer period than
lamp-based products. And because there are no lamps to replace, maintenance
cost and projector downtime is reduced.
In Normal Mode, RZ970 Series
projectors can work continuously for
about 20,000 hours*2. In Eco Mode,
operation is extended to around 24,000
hours*2 of continuous projection,
making these units ideal for roles in
education and signage.
Dust-Resistant Airtight Optical Block
The RZ970 Series’ optical block is airtight, ensuring consistent, long-lasting image
quality for up to 20,000 hours*2 without maintenance. The optical block design
passed stringent testing to assure utmost reliability in environments with up to 0.15
mg of particulate matter per cubic meter (based on American Society of Heating,
Refrigerating, and Air-Conditioning Engineers [ASHRAE] and Japanese Building
Maintenance Association guidelines). The structure prevents brightness degradation
from dust intrusion.
Clean Environment
0.030 mg/m
CLEAN DUSTY
2
maintenance-free projection period.
Brightness Deterioration Comparison
Lamp
4,000 hrs
0 hrs
3
WHO Europe Guideline
for Dust Resistance
3
Brightness
0.110 mg/m
RZ970 Series
20,000 hrs
Hours
Japanese Building
Maintenance Association
ASHRAE
(American Societ y of
Heating, Refrigerating, and
Air-Conditioning Engineers)
0.150 mg/m
20,000 hrs10,000 hrs
3
Versatile Installation Flexibility
Unique Contrast Sync and
Shutter Sync Function
The RZ970 Series is among the world’s first to
feature Contrast Sync and Shutter Sync functions
(Patent Pending) for multi-screen and mapping
applications. Contrast Sync allows the projectors’
digitally modulated contrast function to be
synchronized over the network for consistent
picture quality across screens, while Shutter
Sync incorporates a master/slave principle to
synchronize shutter on/off timing between all
networked projectors. It includes simultaneous
fade-in and fade-out functions.
Note: Us e of RS-232C st raight cable is n ecessary fo r all connection s.
Consul t your sales repre sentative for f urther infor mation.
Contrast Sync
Projector AProjector BProjector A
Average: 5 %Average: 15 %Average: 10 %
Image luminance of all projectors is averaged for unified Dynamic Contrast, rather than each
unit setting Dynamic Contrast separately. Step noise is eliminated in edge-blended areas.
If shutter functions are not linked, shutter ON/OFF timing varies. When shutter functions of
slave projectors are linked to a master, shutter ON/OFF timing is uniform*.
* Includes fade-in a nd fade- out effects. Projecto r shutter functi ons can be se t to operate
individually if desired.
Multi-Screen Support System Seamlessly
Connects Multiple Screens
Edge Blending
Color Matching
Projector AProjector B
Edges of adjacent screens can be blended and their
luminance controlled.
Corrects for slight variations in the color reproduction
range of individual projectors. PC software assures easy,
accurate control.
RS-232C cable
Up to 64 projectors can be connected
Projector B
Color matching
Projector AProjector B
Unit 1
Unit 2
Unit 3
Unit 64
Geometric Adjustment for Custom Screen Surfaces
Geo Adjustment adapts the image for projection onto spherical, cylindrical, and
other specially shaped screens. Fine-tuning is performed with the remote
control, with no external equipment needed. Paired with Multi-Screen Support
System, highly creative mapping presentations are possible in variety of event
and staging applications.
Vertical, Horizontal, and Corner Keystone Correction
Vertical4 CornersHorizontal
Curved Screen Correction
Horizontal ARCVertical ARC
Geometry Manager Pro Software
(PT-RZ970/RZ870/RZ770/RZ660 Only)
Geometry Manager Pro software expands built-in functionality and makes
complex adjustments easy. The free software package includes enhanced
color matching and edge blending for multi-screen projection and adjustment
of multiple screens over the network.
Optional ET-UK20 Upgrade Kit for
Geometry Manager Pro
An optional ET-UK20 Upgrade Kit for Geometry Manager Pro adds creative
masking capability using four lines or bitmap data as well as uniformity
correction and correction area expansion.
Line Masking
(PT-RZ970/RZ870/RZ770/RZ660 Only)
Bitmap Masking
System Daylight View 3 for Sharp and Vivid Images
in Bright Environments
Panasonic’s original System Daylight View 3 prevents images from washing out
in well-lit environments and enhances brightness perception in multi-projector
mapping applications by adjusting sharpness and gamma curves and correcting
colors. The result is greater visual impact even in challenging conditions.
Conventional ProjectorSystem Daylight View 3
Panasonic Dust Test Standard
Up to 10 Years*3 Operation with
Constant Brightness Modes
In environments where full brightness is not necessary, such as surveillance,
control, and simulation rooms, constant operation modes extend light-source
replacement to up to 87,600 hours*3 in Long Life 3 Mode—about 10 years of
24/7 projection—with consistent brightness and color.
*1 Wi th Dynamic Contras t Mode set t o 3. *2 A t this time, brightness will have de creased t o about half its
original l evel (Dynamic Contrast: Mode 3, Ima ge Mode: Dy namic). Panasonic r ecommend s cleaning or
checkup at point of purchase after about 20,000 hours. Light source lifetime may be reduced depending
on environmental c onditions. Replac ement of parts oth er than the l ight source may be requi red within a
short er period. *3 With O peratin g Mode set t o Long Life 3. Long L ife Mode is t ested in a rear-box
projection envir onment, which is not compliant with ASH RAE. 24 hours /day x 365 days/ye ar x 10 years =
87,600 hour s. Replacement of pa rts other than t he light source may be required in a sho rter period.
Without edge blendingWith edge blending
Multi-Unit Brightness and Color Control
This function automatically corrects brightness and color fluctuations
that occur over time in individual projectors in a multi-screen system.
Control up to eight projectors connected via hub increasing to a
maximum of 2,048 projectors with Multi Monitoring & Control Software.
Projector AProjector B
Without Multi-Unit Brightness and Color Control
Projector AProjector B
With Multi-Unit Brightness and Color Control
Create masking dataUse to overlap
projected image
Image projected only
in designated areas
Optional ET-CUK10 Series Auto Screen
Adjustment Upgrade Kit
This optional kit activates the Auto Screen Adjustment plug-in software for
Geometry Manager Pro, allowing you to set up multiple projectors automatically
and simultaneously and save significant amounts of time and money.
Performing multi-screen and curved-screen projection calibration in three quick
steps using a camera*
software encompasses geometric adjustment, edge blending, color matching,
stacking, brightness, and black level.
Single-Cable DIGITAL LINK Control and
Video Connection
Upward HDBaseT™-compatible DIGITAL LINK supports
transmission of uncompressed Full HD video and control
commands through a single CAT 5e or higher STP cable for
distances of up to 150 m (492 ft)*5. Add an optional DIGITAL
LINK Switcher or Digital Interface Box to further simplify installation in large
venues while reducing cost and improving reliability at the same time.
Blu-ray Disc
™
DIGITAL LINK 1
DIGITAL LINK 2
player
Display
Intranet
CAT5e (STP) cable or higher
(
Up to
Projector
Early Warning functions* (Optional)
VPN
150 m/492 ft
Document
camera
Maintenance scheduling
notifications
Device warning /
error notifications
)
VCRPC
Monitoring from PC /
tablet
Network camera
(device monitoring)
ET-YFB200G
PC
Supports Art-Net DMX, Crestron Connected™,
and PJLink
The RZ970 Series is compatible with Art-Net DMX protocol for lighting
management. This allows the projector to be connected to a lighting console,
opening the door to a range of added functionality and control options. The
included LAN/DIGITAL LINK terminal also supports Crestron Connected™ and
PJL ink™ (Class 1) for easy integration of these projectors into an existing AV
network utilizing multiple device brands.
Multi Monitoring & Control Software
Panasonic Multi Monitoring & Control Software supports up to 2,048 devices
over LAN and features system map visualization or auto-search of devices to
be registered. The free sof tware is available with Early Warning functions
(automatic free 90-day trial available). These advanced functions enable
real-time monitoring, abnormality detection, and notification before servicing
is required. Administrators can achieve seamless control and real-time
monitoring while preventing potential problems, saving time, and enhancing
system reliability.
Basic functions
(free)
Monitoring
Server
Monitoring / Control
(up to 2,048 devices)
* Software functionality varies depending on the model.
Quick Start and Quick Off
The laser light-source doesn’t require any warm-up, so images appear almost
instantly (in about one second*6) with RZ970 Series projectors. There’s also no
cool-down period needed when turning the power off at the mains—the
projector can be turned on and off any time as necessary.
Backup Input Setting Optimizes Performance
This feature allows smooth switching to a backup input signal should the
primary signal be disrupted*7, guaranteeing reliability for mission-critical
control rooms, projection mapping, staging, and in other applications where
image display must be maintained.
Conventional System
Multiple-unit widescreen projection
!
k
n
a
l
b
l
a
l
y
i
t
r
a
P
Source
If the main input signal is disrupted,
image display is cut off
Backup Input Setting
Multiple-unit widescreen projection
Switch quickly
Secondary source
If primary signal is disrupted, back-up signal
smoothly engages to maintain image display
Primary source
Other Valuable Features
• Web Browser Control
• Quiet Mode to reduce operational
8
noise*
• DICOM Simulation Mode*
9
• Rec. 709 mode for HDTV projection
to provide accurate colors
• Waveform Monitor for simple yet
precise calibration
• Shutter effect with fade in/fade out
(configurable in 0.5-second
• P-in-P function*
• Image rotation function
• On-screen menu rotatable in Portrait
Mode
• Anti-theft features including chain
opening and security bar
• Customizable start-up logo
• ID assignment for up to 64 units
• Built-in test pattern
intervals from 0.5 to 4.0 seconds,
or to 5-, 7-, or 10-second intervals)
*5 150 m (492 f t) transmissi on available only in Lon g Reach Mode with opt ional E T-YFB20 0G DIG ITAL
LINK S witcher for signa ls up to 1080 /60p (do t-clock frequency 148.5 MHz). Transmission distan ce is up
to 100 m (328 f t) in other case s. *6 Wit h Quick St artup M ode set to ON. Quick Star tup Mode r esets to
OFF af ter duration set in A vailable Period expir es. When Q uick Sta rtup Mo de is set to ON, the projector
continu es to warm up, increasin g power consumption. Image appe ars in about nine seco nds in Normal
Stand by Mode and a bout 12 secon ds on Eco Standby Mo de. *7 Combination of primar y/secondary input
terminal s is fixed. Th e Backup In put Set ting is enabled only w hen the inpu t signal to the primar y and
secondary termi nals is the s ame. *8 PT-RZ7 70/67 0 Series do es not support Qu iet Mode. * 9 This product
is not a medic al instrument. D o not use for actual medical diagn osis. *10 T he Picture-in-Picture functio n
cannot be used with c ertai n inputs an d input signals.
ET-UK20 (PT-RZ970/RZ870/RZ770/RZ660 only)
Geometry Manager Pro Upgrade Kit
ET-CUK 10 Series
(PT-RZ970/RZ870/RZ770/RZ660 only)
Auto Screen Adjustment Upgrade Kit
Note: Available worldwide except in the United States.
ET-SWA100 Series
Early Warning Software
Note: Part number suffix may differ depending on the
license type.
* Multi Monitoring & Control Software Ver. 2.0 or later is
required. Please download from the following website:
https://panasonic.net/cns/projector/download/application/
Keystone correction range*
with opt ional Upg rade Kit E T-UK20
Installation
Term inal s
SDI IN
HDMI IN
DVI-D IN
RGB 1 IN
RGB 2 IN
SERIAL/MULTI PROJECTOR
SYNC IN
SERIAL/MULTI PROJECTOR
SYNC OUT
REMO TE 1 IN
REMO TE 1 OUT
REMO TE 2 IN
DIGITAL LINK/LAN
Power supply
Power consumption*
7
(During standby)
Dimensions
With standard Lens
(W x H x D)
Without Lens
9
Weight*
With standard Lens
Without Lens
Cabinet material s
Cabinet color
Operation noise*
3
Operating environment
Applicable software
Supplied accessories
*1 Value is for the supplied standard zoom lens. The value varies depending on the lens. *2 The value of the light output at the center region of the projected image is extracted based on the light output measurement method defined by the ISO/IEC 21118:2012
international standards. *3 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. *4 Figures vary depending on lens used. Please refer to Spec File or Operating Instructions. *5 Optical axis shift is
not supported on the ET-DLE055, and the optical axis is fixed with the ET-DLE030. *6 When vertical and horizontal keystone are used simultaneously, correction cannot be made exceeding total of 55°. *7 In conditions with an operating temperature of 25 °C
[77 °F], altitude 700 m [2,297 ft], IEC62087: 2008 Broadcast Content, Picture Mode: Standard, Dynamic Contrast: 2. *8 With legs at shortest position. *9 Average value. May differ depending on the actual unit. *10 When used in locations from 0 m to 4,200 m
(0 ft to 13,780 ft) above sea level in Normal Mode, and from 0 m to 2,700 m (0 ft to 8,858 ft) above sea level in other modes. If the ambient temperature exceeds 35 °C (95 °F) [30 °C (86 °F) for PT-RZ970/RW930/RX110] when used in locations from 0 m to
2,700 m (0 ft to 8,858 ft) above sea level, or if it exceeds 25 °C (77 °F) when used in locations from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level, the light output may be reduced to protect the projector. *11 Not included with PT-RZ870. Please
download from our global website: https://panasonic.net/cns/projector/download/application/
Note: Hatch area is the numerical value of the supplied standard lens.
HDMI 19 -pin x 1 (Com patible wi th HDC P, Deep Color)
DVI- D 24-pin x 1 ( DVI 1.0 compli ant, comp atible wit h HDCP, single lin k)
RGB x 1 ( BNC x 5): R GB/ YP
D-sub HD 15-pin (female) × 1: RGB/YP
D-sub 9-pin (female) x 1 for contrast sync/shutter sync (RS-232C compliant)
D-sub 9-pin (male) x 1 for contrast sync/shutter sync (RS-232C link control)
M3 stere o mini jack x 1 for re mote cont rol (wired )
M3 stere o mini jack x 1 for pr ojector c onnecti on contro l
D-sub 9-pin (female) x 1 for external control (parallel)
RJ-4 5 x 1 for network, D IGITAL LI NK conne ction, 100 Base-TX, com patible wi th Art- Net, PJLink™, Deep Colo r, HDCP
AC 100– 240 V, 50/6 0 Hz
1,05 0 W
Normal: 742 W
Eco: 617 W
85 W with Q uick Sta rtup Mo de set to ON , 0.3 W with S tandby M ode set to Ec o, 3 W with St andby Mo de set to Nor mal
498 x 20 0*8 x 581 mm (19 19/32˝ x 7 7/8˝*8 x 22 7/8˝ )
8
498 x 20 0*
Approx . 23.2 kg (51.1 lbs.)
Approx . 22.4 kg (49.4 l bs.)
Molded plastic
Black / White
41 dB / 37 dB [Qu iet 1] / 35 dB [Q uiet 2]
Operating temperature: 0–45 °C (32–113 °F)*
Logo Transf er Soft ware, Multi Monit oring & Con trol Sof tware, Geometr y Manager Pro
Power cor d, wireles s/wire d remote con trol unit , batter ies (R0 3/AAA t ype x 2), CD -ROM (Operat ing instr uction, L ogo Transfer S oftware*
lens cover ( models wi th lens only )
, operati ng humidit y: 10– 80 % (no cond ensatio n)
36 dB
11
, Multi Mo nitoring & C ontrol Soft ware*11), projection lens cover,
35 dB
16.5 mm (0.6 5 in) diagonal
(16:10 aspect ratio)
1,024,000 ( 12 80 x 800)
pixels
2
—
—
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export control regulations.
DLP, DLP logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments. The terms HDMI
and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States and other countries. PJLink™ is a registered trademark or pending
trademark in Japan, the United States, and other countries and regions. All other trademarks are the property of their
respective trademark owners.