PRELIMINARY
AS OF JUNE 2020
PT-RZ990 Series
1-Chip DLP™ Projectors
AVAILABLE FROM AUGUST 2020
PT-RZ790/RZ790L/RZ690/RZ690L: Available from August 2020
PT-RZ990/RZ990L/RZ890/RZ890L: Available from September 2020
Compact 1-Chip DLP™ Laser Projectors
Bring High Brightness and Simple Flexibility
to Exhibition Spaces
Black Models
With supplied lens
Without lens
Light Output
Resolution
PT-RZ990 Series
PT-RZ990 PT-RZ890 PT-RZ790 PT-RZ690
PT-RZ990L PT-RZ890L PT-RZ790L PT-RZ690L
9,400 lm*1 / 10,000 lm (Center)*28,500 lm*1 / 8,800 lm (Center)*27,000 lm*1 / 7,200 lm (Center)*26,000 lm*1 / 6,200 lm (Center)*
WUXGA
White Models
2
• Bright, Color-Rich Images in Any Environment
The PT-RZ990 Series delivers the brightness, resolution, and color that designers need to
enhance exhibits with bright, bold, and vivid pictures. SOLID SHINE Laser and Quartet Color
Harmonizer enhance color-depth and white-balance accuracy for arrestingly realistic pictures
even in well-lit spaces.
• Light, Quiet, Compact Projectors are Easy to Install
Projectors support our 1-Chip DLP™ lenses and 4K signal input*3 via HDMI® and DIGITAL LINK,
*4
adapting to your space with 22.9 kg
Projector Control app enhances efciency with On/Off function, lens adjustment, touchscreen
OSD navigation, and projection auto-focusing using your smartphone camera
body and 35 dB*5 operation in Normal Mode. Smart
*6
.
• Proven SOLID SHINE Laser Reliability
Hermetically sealed DMD block, shielded laser drive, and new lterless cooling system
*7
eliminate the hassle of maintenance for 20,000 hours
brightness ramp and color uniformity remain linear. For extra insurance, Backup Input
switches to a failback if primary video is interrupted.
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. *2 Average light-output value of all shipped products measured at center of screen in NORMAL Mode. *3 4K signals are
converted to the projector's resolution (1920 x 1200 pixels) upon projection. Supported terminals: DIGITAL LINK/HDMI®. *4 RZ790/690 only including standard lens. RZ990/890 weighs 23.1 kg including standard lens. *5 RZ690 only. RZ790 operates at 36 dB in Normal Mode, while RZ890 and
RZ990 operate at 41 dB in Normal Mode, 37 dB in Quiet1 Mode, and 35 dB in Quiet2 Mode. *6 Projector auto-focus may not be supported on some mobile devices. *7 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, NORMAL
Mode, Dynamic Contrast [3 ], temperature 30 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of airborne particulate matter. Estimated time until brightness decreases to 50 % will vary depending on environment and usage conditions. Parts other than the light source may require
replacement before 20,000 hours, and checkup is recommended around this time. *8 Combination of primary/backup input terminals is fixed. Backup Input function enabled when input signal to primary/backup terminals is the same.
of continuous projection, while
*8
PRELIMINARY
AS OF JUNE 2020
Specifications (Tentative)
Model With supplied lens
Projec tor typ e
DLP™ chip
Without lens
Panel size
Display method
Number of pixels
Light source
Light output
Time unti l light out put declin es to 50 %*
Resolution
Contrast ratio*
Screen size (diagonal)
Center-to-corner zone ratio*
1
1
Lens
4
Lens shift*
(From th e origin point
of the lens mo unter)
Vertical
Horizontal
Keystone correction range
Keystone correction range
with optional ET-UK 20 Upgr ade Kit
Installation
Terminals
SDI IN
HDMI IN
DVI- D IN
RGB 1 IN
RGB 2 IN
SERI AL/M ULTI PR OJEC TOR
SYNC I N
SERI AL/M ULTI PR OJEC TOR
SYNC O UT
REMO TE 1 IN
REMO TE 1 OU T
REMO TE 2 IN
DIGITAL LINK
LAN
Power supply
Power consumption
Cabinet materials
Operation noise*
1
Dimensio ns (W x H x D)
7
Weight*
Operating environment
Applicable software
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. *2 Average light-output value of all shipped products measured at center of screen in NORMAL Mode.
*3 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast [3], under conditions with 30 °C (86 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until
light output declines to 50 % varies depending on environment. *4 Lens shift is not supported on the ET-DLE055, and the optical axis is fixed with the ET-DLE035/ET-DLE030. *5 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection. Supported
terminals: DIGITAL LINK/HDMI®. *6 With legs at shortest position. *7 Average value. May differ depending on the actual unit. *8 The light output may be reduced to protect the projector depending on the temperature or altitude of operational environment.
PT- RZ 990 PT- RZ 890 PT- RZ 790 PT- RZ 690
PT- RZ 990L PT-RZ890L PT- RZ 790L PT- RZ 690L
1-Ch ip DLP™ projector
17.0 mm (0.67 in) diagona l (16:10 aspect rat io)
DLP™ chip x 1, DLP™ projection system
2,304, 000 (192 0 x 1200 pixel s)
Laser diodes
9,400 lm*1/10,000 lm ( Center)*
3
20,00 0 hours (NORM AL)/24,00 0 hours (ECO)
1920 x 1200 pixe ls
10,000:1 ( Full On/Full Of f, Dynamic Contr ast Mode: 3)
1.27–15.24 m (50 –60 0 in), 1.27–5.0 8 m (50–20 0 in) with E T-DLE0 55, 2.54– 8.89 m (100–3 50 in) with ET-DL E035/E T-DLE0 30, 2.54–10.16 m (100– 400 in) with ET-D LE020, 16:10 aspect r atio
90 %
With sup plied lens: Powered zo om (throw ratio 1.71–2.41:1), powered f ocus F 1.7–1.9, f 25.6– 35.7 mm
Without lens: Optional powered zoom/focus lenses
+50 %, -16 % (+40 %, -16 % with E T-DLE060 ) (powered)
+30 %, -10 % (+10 %, -20 % with ET-D LE020, +19 %, -10 % with ET-DL E060, +28 %, -10 % with ET-D LE105/ET-DL E085) (po wered)
Vertical: ±40 ° (±5 ° with ET-DLE020, ±16 ° with ET-DLE060, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055, +5 ° with ET-DLE035/ET-DLE030),
Horizon tal: ±15 ° (±10 ° with ET-DL E060 ) (cannot be operate d with ET-D LE035/ ET-DLE030 /ET-DLE0 20)
Vertical: ±45 ° (±16 ° with ET-DLE060, ±40 ° with ET-DLE150/ET-DLE250/ET-DLE170, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055),
Horizon tal: ±40 ° (±10 ° with ET-DL E060, ±15 ° with ET-DL E105/E T-DLE085 /ET-DLE0 55)
When [ VERTICA L KEYSTO NE] and [HO RIZONTAL K EYSTON E] are us ed simulta neously, co rrectio n cannot be made exceed ing a total of 5 5 °.
Ceiling/floor, front/rear, free 360-degree installation
BNC x 1: 3G/ HD/SD-S DI input
HDMI 19 -pin x 1 (Com patible with HDC P 2.2, Deep Color, 4K /60p signal in put*5)
DVI- D 24-pin x 1 ( DVI 1.0 compl iant, comp atible with HDC P, com patible with single li nk only)
RGB x 1 (B NC x 5): RGB/ YPBPR /YCBC R/YC/VIDEO
D-sub H D 15-pin (fem ale) x 1: RGB/ YPBPR /YCBC R
D-sub 9 -pin (fema le) x 1 for exte rnal control (R S-232C complian t)
D-sub 9 -pin (male) x 1 fo r link control
M3 x 1 for wire d remote con trol
M3 x 1 for link co ntrol (for wired rem ote control)
D-sub 9 -pin (fema le) x 1 for exte rnal control (pa rallel)
RJ-4 5 x 1 for network and D IGITAL LIN K connections ( HDBaseT™ compliant), PJLink™ (Class 2 ) compatible, 100B ase-TX, Art- Net compatible, H DCP 2.2 compatib le, Deep Color comp atible,
4K/60 p signal input*
RJ-4 5 x 1 for network con nection, PJ Link™ (Class 2 ) compatible, 10Bas e-T/100Ba se-TX, Art- Net compa tible
AC 100– 240 V, 50/6 0 Hz
920 W ( TBD)
Molded plastic
41 dB (No rmal) / 37 d B (Quiet1) / 3 5 dB (Quiet2)
With supp lied lens: 498 x 20 0*6 x 581 mm (19 19/32˝ x 7 7/8 ˝ *6 x 22 7/8˝)
Withou t lens: 498 x 200*
With sup plied lens: A pprox. 23.1 kg (50.9 lbs )
Withou t lens: Approx. 22. 3 kg (49.2 lbs )
Operati ng tempera ture: 0–45 °C ( 32–113 °F)*8, operati ng humidit y: 10–80 % (no con densati on)
Logo Transfe r Software, Mul ti Monitoring & Con trol Softwar e, Geomet ry Manag er Pro (ET-UK 20 Upgrade Kit , ET-CU K10 Auto Scr een Adjus tment Kit ), Smart Project or Control for iOS /Android
2
5
6
x 538 mm (19 19/32˝ x 7 7/8 ˝ *6 x 21 3/16˝)
8,500 l m*1/8,800 lm (Center)*
900 W ( TBD) 720 W (T BD) 700 W ( TBD)
2
7,000 lm*1/7,200 lm (C enter)*
With sup plied lens: A pprox. 22.9 kg (5 0.5 lbs)
Withou t lens: Approx. 22.1 kg (48 .7 lbs)
2
6,000 lm*1/6,20 0 lm (Center)*
35 dB (N ormal)36 dB (N ormal)
2
™
Optional Accessories
• Fixed-Focus Lens
ET-DLE030 (0.380:1) / ET-DLE035 (0.380:1) / ET-DLE055 (0.785:1)
• Zoom Lens
ET-DLE020 (0.280–0.299:1) / ET-DLE060 (0.600–0.801:1) /
ET-DLE085 (0.782–0.977:1) / ET-DLE105 (0.978–1.32:1) /
ET-DLE150 (1.30–1.89:1) / ET-DLE170* (1.71–2.41:1) /
ET-DLE250 (2.27–3.62:1) / ET-DLE350 (3.58–5.45:1) /
ET-DLE450 (5.36–8.58:1)
* The ET-DLE170 is equivalent of supplied lens. The availability of the ET-DLE170
varies depending on the country.
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability may vary by country or region. This product may be subject to export control regulations. DLP, DLP
logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments. The terms HDMI and HDMI
High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc. in the United States and other countries. Trademark PJLink is a trademark applied for trademark
rights in Japan, the United States of America and other countries and areas. Android is a trademark or registered
trademark of Google LLC. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used
under license. SOLID SHINE is a trademark of Panasonic Corporation. All other trademarks are the property of their
respective trademark owners. © 2020 Panasonic Corporation. All rights reserved.
• Ceiling Mount Bracket
ET-PKD130H (6-axis, for high ceiling)
ET-PKD120H (for high ceiling)
ET-PKD120S (for low ceiling)
Note: Use ET-PKD120H, ET-PKD120S, and ET-PKD130H in combination with
ET-PKD130B. ET-PKD130H is recommended when used with ET-DLE030/ET-DLE035.
• Projector Mount Bracket
ET-PKD130B
• DIGITAL LINK Switcher
ET-YFB200G
Note: ET-YFB200G is not compatible with 4K signals.
• Digital Interface Box
ET-YFB100G
Note: ET-YFB100G is not compatible with 4K signals.
• Geometry Manager Pro Software Upgrade Kit
ET-UK20
• Auto Screen Adjustment Upgrade Kit
ET-CUK10/ET-CUK10P
• Early Warning Software
ET-SWA100 Series
Note: Part number suffix may differ depending on the license type.
* Multi Monitoring & Control Software Ver. 2.0 or later is required. Please download
from the following website: www.panasonic.net/cns/projector/download/application/
For more information about Panasonic projectors, please visit:
Projector Global Website – panasonic.net/cns/projector
Facebook – www.facebook.com/panasonicprojectoranddisplay
YouTube – www.youtube.com/user/PanasonicProjector
All information included here is valid as of June 2020.
PT-RZ990PRE2 Printed in Japan.