Panasonic PT-RZ770BU User Manual

RZ970 Series

1-Chip DLP™ Projectors

PT-RZ970/RW930/RX110 Series

PT-RZ770/RW730 Series

PT-RZ660/RW620 Series

U n l e a s h t h e P o w e r o f Y o u r I m a g i n a t i o n

EVENTS

Engineered for Elite Marathon Performance in

Permanent or Temporary Installations

With immersive picture quality and practical features, potential application for Panasonic’s PT-RZ970 Series projectors extends from permanent installation in museums, theaters, and control rooms through roles in exhibition/rental and staging. Powered by the acclaimed SOLID SHINE Laser drive and latest 1-Chip DLP™ technology, these projectors exceed expectations with low-maintenance stability and vivid color performance maintained for longer than competitive products over years of dependable 24/7 operation. The PT-RZ970 Series: made by professionals, for professionals.

	High Picture Quality	Quick Start and Quick Off	Free 360° Install	Dust-Resistant Optics	Economical	20,000 hours*1
						Maintenance free

		PT-RZ970/RW930/RX110 Series		PT-RZ770/RW730 Series		PT-RZ660/RW620 Series
	PT-RZ970/L	PT-RW930/L	PT-RX110/L	PT-RZ770/L	PT-RW730/L	PT-RZ660/L	PT-RW620/L
Resolution	WUXGA	WXGA	XGA	WUXGA	WXGA	WUXGA	WXGA
Brightness	10,000 lm (Center)		10,400 lm (Center)	7,200 lm (Center)		6,200 lm (Center)
		9,400 lm*	10,000 lm*		7,000 lm*		6,000 lm*
Contrast				10,000:1
* Measured according to strict international ISO 21118 standards. Note: PT-RZ970L / RZ770L / RZ660L / RW930L / RW730L / RW620L / RX110L do not include a lens.

2

BUSINESS

MUSEUMS	EDUCATION

See the Advantages of Panasonic’s Laser Technology

SOLID SHINE Laser and DLP™ Projection Balances Image Quality with

20,000-hour Maintenance-free*1 Endurance

Harnessing Full-Spectrum Color with Up to 10,400 lm (Center)*2 Brightness

With next-generation DLP™ technology delivering high-resolution detail and dual laser modules outputting up to 10,400 lm (Center)*2 of brightness, Quartet Color Harmonizer to reduce energy loss from the light source, and robust heat-resistant phosphor wheel, the Panasonic SOLID SHINE Laser system produces scintillating images with unfailing reliability.

Superior White Balance and

Color Reproduction

The Quartet Color Harmonizer wheel mechanism captures a wider color space than comparable projectors, which allows white to be reproduced realistically on screen. Some conventional projectors can’t achieve an accurate white balance, so images can appear with a distracting greenish tint. Not the case with Panasonic SOLID SHINE Laser projectors.

SOLID SHINE Laser Maintains Picture Quality for Longer

Thanks to the long-lasting dual solid-state laser modules, there are no lamps to replace, and image color/brightness degrades very gradually in consistent, linear fashion. As well as reducing maintenance hassle, out-of-the-box picture quality is preserved longer.

100%

Comparison of Color Brightness

Brightness Deterioration Comparison

EnergyLight

Brightness

Lamp

PT-RZ970 Series

Color

Brightness

4,000 hrs

20,000 hrs

Y B G R

Pure white

Lamp-based

PT-RZ970 Series

Hours 0 hrs

10,000 hrs

20,000 hrs

1-Chip DLP projectors

*1 At this time the brightness will have decreased to approximately half of its original level (Dynamic Contrast Mode: 3, Image Mode: Dynamic). Panasonic recommends cleaning or checkup at point of purchase after about 20,000 hours. Light source lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period.

*2 PT-RZ970/RW930 features 10,000 lm, PT-RZ770/RW730 7,200 lm, PT-RZ660/RW620 6,200 lm, and PT-RX110 10,400 lm of brightness (measured at center of screen).

3