PT-RZ570 Series
1-Chip DLP™ Projectors
PT-RZ570W
PT-RZ570B
Blending Premier 1-Chip DLP™ Images with Long-lasting SOLID SHINE Laser Power
SOLID SHINE Laser:
Ideal for Education
What do I want in a projector?
and Business
Big, bold, pin-sharp images don’t fade away fast
with SOLID SHINE Laser. In fact, image quality
and endurance far outstrips that of competitive
lamp-based projectors, with almost no
maintenance required. Add a suite of features that
makes daily operation a breeze and you start to
get the picture: the PT-RZ570 Series is a smart
choice for beautiful images in classrooms,
boardrooms, or ofce meeting spaces.
Excellent Picture Quality
Bright, Natural Pictures in WUXGA
SOLID SHINE Laser guarantees magnificent image quality thanks to a powerful
solid-state laser light source and four-segment color wheel that boosts color
without sacrificing brightness.
Image Quality Maintained
Anti-Dust Protection
These projectors are dustproof. There are no lamps or filters to replace.
Just sit back and enjoy 20,000 hours* of maintenance-free projection with
consistently brilliant picture quality.
* Panasonic recommends cleaning or checkup at point of purchase after 20,000 hours (approximately). Light source lifetime
may be reduced depending on environmental conditions. Dustproof tests are conducted to confirm operational effectiveness
under conditions with 0.15 mg/m3 of particulate matter (based on tests by the American Society of Heating, Refrigerating, and
Air-Conditioning Engineers [ASHRAE], and the Japanese Building Maintenance Association). Measurements are made using
acceleration tests.
Low Running Costs
Low Total Cost of Ownership
SOLID SHINE Laser Phosphor projectors are cheaper to run, end of story.
They require almost no maintenance, and with a variety of ECO features,
use much less energy to operate continuously.
ONOFF
Instant Projection
Quick Start* and Quick Off
Because the PT-RZ570 Series is powered by SOLID SHINE Laser technology,
you can turn the projector on and off any time you like. With Quick Startup
Mode, projection begins in about one second*. No warm up period, no wait.
* When ECO MANAGEMENT > QUICK STARTUP is set to ON. Quick Start is unavailable after Available Period setting has expired.
When QUICK STARTUP is set to ON, power consumption is increased.
The
Smart
Laser
Projector
Choice!
2
3