Panasonic PT-RZ21KE, PT-RS20KE User Manual

Operating Instructions

Functional Manual

DLP™ Projector

Model No.

PT-RZ21K

 PT-RS20K

The projection lens is sold separately.

Commercial Use

Thank you for purchasing this Panasonic product.

■ The Operating Instructions correspond to the rmware’s main version 3.00 and higher.

■ This manual is common to all the models.

zfor India

PT- RZ21KD

zfor Taiwan

PT- RZ21K

zfor other countries or regions

PT- RZ21K

■ Before operating this product, please read the instructions carefully and save this manual

for future use.

■ Before using this product, be sure to read “Read this rst!” (x pages 5 to 15).

PT-RS20K

ENGLISH

DPQP1195ZE

Contents

Read this rst! 5

Chapter 1 Preparation

Precautions for use 19

Cautions when transporting Cautions when installing Cautions when setting up the projector

Security DIGITAL LINK Art-Net

Application software supported by the projector

Storing Disposal Cautions on use Accessories Optional accessories

About your projector

Remote control Projector body

Preparing the remote control

Inserting and removing the batteries When using the multiple projectors Connecting the remote control to the projector

with a cable

19 19

23 23

23 23 23 23

25 27

33 33

Chapter 2 Getting Started

Setting up 36

Usable outlet Installation mode Parts for installation (optional) Projected image and throw distance Adjusting adjustable feet

Attaching/removing the projection lens

(optional)

Attaching the projection lens Removing the projection lens

Connecting

Before connecting

Connecting example: AV equipment Connecting example: Computers Connecting example using DIGITAL LINK Connecting example when using the

contrast synchronization function/shutter synchronization function

36 36 38 38 48

49 50

5 3 5 4

5 6

Chapter 3 Basic Operations

Switching on/off the projector 59

Connecting the power cord Power indicator Switching on the projector When the initial setting screen is displayed Making adjustments and selections Switching off the projector

Projecting

Selecting the input signal Adjusting the focus, zoom, and lens shift Adjusting the focus when the Fixed-focus Lens

Setting the lens type Executing the lens calibration Moving the projection lens to the home position

Lens shift range

Adjusting the lens mounter when the focus is

Operating with the remote control

Using the shutter function

Using the on-screen display function Using the automatic setup function Switching the image aspect ratio

Using the function button

Displaying internal test pattern

Using the status function

Using the AC voltage monitor function Setting ID number of the remote control

(Model No.: ET-D75LE95, ET-D75LE90) is

used

unbalanced

6 0

7 3

7 6

Chapter 4 Settings

Menu navigation 85

Navigating through the menu Main menu Sub-menu

8 6

6 1

6 2 6 8

6 9

7 0

7 3

8 0

81 81

8 3 8 3

2 - ENGLISH

Contents

[PICTURE] menu

[PICTURE MODE] [CONTRAST] [BRIGHTNESS] [COLOR] [TINT] [COLOR TEMPERATURE] [GAMMA] [SYSTEM DAYLIGHT VIEW] [SHARPNESS] [NOISE REDUCTION] [DYNAMIC CONTRAST] [COLOR SPACE] [SYSTEM SELECTOR] sRGB-compliant video

[POSITION] menu

[SHIFT] [ASPECT] [ZOOM] [CLOCK PHASE] [GEOMETRY]

[ADVANCED MENU] menu

[DIGITAL CINEMA REALITY] [BLANKING] [INPUT RESOLUTION] [CLAMP POSITION] [EDGE BLENDING]

[FRAME RESPONSE] [FRAME DELAY] [FRAME CREATION] [FRAME LOCK]

[RASTER POSITION]

[DISPLAY LANGUAGE] menu

Changing the display language

[3D SETTINGS] menu

[3D SYSTEM SETTING] [3D SYNC SETTING] [3D INPUT FORMAT] [LEFT/RIGHT SWAP] [3D COLOR MATCHING] [3D PICTURE BALANCE]

[DARK TIME SETTING]

[3D TEST MODE] [3D TEST PATTERN] [SAFETY PRECAUTIONS MESSAGE] [3D SAFETY PRECAUTIONS]

91 91 92 92 92 92

9 4

95 95

9 6 9 6

97 98 98

99 99

100 101 101

108

108 108 109 109

110

111 112 112

113 113

114

115

115 115

116 116

117 117 117 118 118 119 119

[DISPLAY OPTION] menu

[COLOR MATCHING] [LARGE SCREEN CORRECTION] [SCREEN SETTING] [AUTO SIGNAL] [AUTO SETUP] [BACKUP INPUT SETTING] [SIMUL INPUT SETTING] [RGB IN]

[DVI-D IN]

[HDMI IN] [DIGITAL LINK IN] [SDI IN] [ON-SCREEN DISPLAY] [MENU MODE] [IMAGE ROTATION] [BACK COLOR] [STARTUP LOGO]

[UNIFORMITY]

[SHUTTER SETTING]

[FREEZE] [WAVEFORM MONITOR] [CUT OFF]

[PROJECTOR SETUP] menu

[PROJECTOR ID] [PROJECTION METHOD] [LENS] [OPERATION SETTING] [LIGHT OUTPUT] [BRIGHTNESS CONTROL] [STANDBY MODE]

[NO SIGNAL SHUT-OFF]

[NO SIGNAL LIGHTS-OUT] [INITIAL STARTUP] [STARTUP INPUT SELECT] [DATE AND TIME] [SCHEDULE] [MULTI PROJECTOR SYNC]

[RS-232C]

[REMOTE2 MODE]

[FUNCTION BUTTON]

[STATUS]

[AC VOLTAGE MONITOR] [SAVE ALL USER DATA]

[LOAD ALL USER DATA] [INITIALIZE]

[SERVICE PASSWORD]

[P IN P] menu

Using P IN P function

[TEST PATTERN] menu

[TEST PATTERN]

125

130

143

122

126

128

129

135

136

139

141

142

157

162

163

164

168

170

173

175

177

120

121

123

124

133

135

137

140

142

155

158

162

163

166

169

170

172

173

174

175

177

ENGLISH - 3

Contents

[SIGNAL LIST] menu 178

Registering new signals Renaming the registered signal Deleting the registered signal Protecting the registered signal Expanding signal lock-in range Sub memory

[SECURITY] menu

[SECURITY PASSWORD] [SECURITY PASSWORD CHANGE] [DISPLAY SETTING] [TEXT CHANGE]

[CONTROL DEVICE SETUP] [CONTROL DEVICE PASSWORD CHANGE]

[NETWORK] menu

[DIGITAL LINK MODE] [DIGITAL LINK STATUS] [NETWORK SETUP] [NETWORK CONTROL] [NETWORK STATUS] [DIGITAL LINK MENU] [Art-Net SETUP] [Art-Net CHANNEL SETTING] [Art-Net STATUS]

178 178 178 179 179

180

181

181 181 181 182 182

183

185

185 185

186 186

187 187 187 188 189

Chapter 7 Appendix

Technical information 222

PJLink protocol

Using Art-Net function

Control commands via LAN <SERIAL IN>/<SERIAL OUT> terminal <REMOTE 2 IN> terminal

Setting the IP address in standby status

Two-window display combination list Control device password

Upgrade Kit

List of compatible signals

Specications

Dimensions

Precautions for attaching the Ceiling Mount

Bracket

Index

253

255

222

240

249

252

224

229

232

236

236 239

240

241

Chapter 5 Operations

Network connection 191

Connecting to the network

Web control function

Computer that can be used for setting Accessing from the web browser

191

194

194 194

Chapter 6 Maintenance

Light source/temperature indicators 213

When an indicator lights up

Maintenance

Before maintenance Maintenance

Troubleshooting

Self-diagnosis display

213

215

215 215

216

218

4 - ENGLISH

Read this rst!

WARNING: THIS APPARATUS MUST BE EARTHED.

WARNING: To prevent damage which may result in re or shock hazard, do not expose this appliance to rain

or moisture. This device is not intended for use in the direct eld of view at visual display workplaces. To avoid incommoding reexions at visual display workplaces this device must not be placed in the direct eld of view. The equipment is not intended for used at a video workstation in compliance BildscharbV.

The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.

WARNING:

1. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.

2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualied

service personnel.

3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthingtype mains plug. This plug will only t an earthing-type mains socket. This is a safety feature. If you are unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the earthing plug.

WARNING:

This equipment is compliant with Class A of CISPR32. In a residential environment this equipment may cause radio interference.

(for Taiwan)

WARNING:

This equipment complies with the Class A standard of CISPR32. This is Class A information technology equipment that may cause radio frequency interference when used in a residential environment, in which the user will be required to take certain appropriate countermeasures.

CAUTION: To assure continued compliance, follow the attached installation instructions. This includes using

the provided power cord and shielded interface cables when connecting to computer or peripheral devices. Also, any unauthorized changes or modications to this equipment could void the user’s authority to operate this device.

This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a domestic environment.

Directive 2009/125/EC

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

ENGLISH - 5

Read this rst!

WARNING: RISK OF ELECTRIC SHOCK. DON’T OPEN

Indicated on the projector

The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the

product.

WARNING: Do not look at the light emitted from the lens while the projector is being used.

Indicated on the projector

This projector is designed for commercial use.

Notice on laser

(for USA and Canada)

This projector is the Class 3R laser product that complies with IEC 60825-1:2007.

130 For North America “Complies with 21 CFR Parts 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No.50 dated June 24.2007”

IEC 60825-1:2007 LASER RADIATION AVOID DIRECT EYE EXPOSURE CLASS 3R LASER PRODUCT WAVE LENGTH:448-462nm MAXIMUM OUTPUT:333mW

IEC 60825-1:2007 RAYONNEMENT LASER EXPOSITION DIRECTE DANGEREUSE POUR LES YEUX APPAREIL À LASER DE CLASSE 3R LONGUEURS D'ONDES:448-462nm MAXIMALE DU RAYONNEMENT:333mW

DPQT1100ZA

DANGER-

CLASS 4 LASER RADIATION WHEN OPEN AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION DANGER-

RAYONNEMENT LASER DE CLASSE 4 - EN CAS D'OUVERTURE EXPOSITION DANGEREUSE AU RAYONNEMENT DIRECT OU DIFFUS DES YEUX OU DE LA PEAU

TQFX608

(Inside of product)

6 - ENGLISH

Read this rst!

(for India)

This projector is the Class 1 laser product that complies with IEC/EN 60825-1:2014.

(for other countries or regions)

This projector is the Class 1 laser product that complies with IEC/EN 60825-1:2014.

CAUTION: Use of controls or adjustments or performance of procedures other than those specied herein

may result in hazardous radiation exposure.

WARNING (North America)

This projector would become Class IIIb laser product when an interchangeable projection lens is used under the condition that throw ratio is greater than 3.0, and if used without lens hood mounted over the long lens. If you use under this condition, you must receive variance approval letter from FDA before usage. Class IIIb levels of laser radiation are considered to be an acute hazard to the skin and eyes from direct

radiation.

CAUTION (North/Middle/South America/Taiwan)

This equipment is equipped with a three-pin grounding-type power plug. Do not remove the grounding pin on the power plug. This plug will only t a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the grounding plug.

Do not remove

ENGLISH - 7

Read this rst!

WARNING (USA and Canada)

fNot for use in a computer room as dened in the Standard for the Protection of Electronic Computer/Data

Processing Equipment, ANSI/NFPA 75.

fFor permanently connected equipment, a readily accessible disconnect device shall be incorporated in the

building installation wiring.

fFor pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily

accessible.

NOTIFICATION (Canada)

This class A digital apparatus complies with Canadian ICES-003.

For USA-California Only

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate

FCC NOTICE (USA)

Verication

Model Number: PT-RZ21K / PT-RS20K Trade Name: Panasonic Responsible Party: Panasonic Corporation of North America Address: Two Riverfront Plaza, Newark, NJ 07102-5490 General Contact: http://www.panasonic.com/support Projector Contact: https://panasonic.net/cns/projector/

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own

expense.

FCC Warning:

To assure continued compliance, follow the attached installation instructions. This includes using the provided power cord and shielded interface cables when connecting to computer or peripheral devices. Also, any unauthorized changes or modications to this equipment could void the user’s authority to operate this device.

8 - ENGLISH

Read this rst!

IMPORTANT: THE MOLDED PLUG

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This appliance is supplied with a molded three pin mains plug for your safety and convenience. A 13 amp fuse is tted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark If the plug contains a removable fuse cover, you must ensure that it is retted when the fuse is replaced. If you

lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from an Authorized Service Center.

If the tted molded plug is unsuitable for the mains socket in your home, then the fuse should be

removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.

If a new plug is to be tted, please observe the wiring code as shown below. If in any doubt, please consult a qualied electrician.

WARNING: THIS APPLIANCE MUST BE EARTHED.

IMPORTANT: The wires in this mains lead are colored in accordance with the following code:

As the colors of the wire in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in your plug, proceed as follows.

The wire which is colored GREEN - AND - YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the Earth symbol

YELLOW.

The wire which is colored BLUE must be connected to the terminal in the plug which is marked with the letter N or colored BLACK.

or the BSI mark on the body of the fuse.

Green - and - Yellow: Earth Blue: Neutral Brown: Live

or colored GREEN or GREEN - AND -

The wire which is colored BROWN must be connected to the terminal in the plug which is marked with the letter L or colored RED.

How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.

Importer’s name and address within the European Union

Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

ENGLISH - 9

Read this rst!

rHazard distance (IEC 62471-5:2015)

The distance from the projection lens surface, at which the level of exposure has reached the level of the applicable Exposure Limit Value, is known as the hazard distance (HD) or safety distance.

Do not look into the projected light from inside the hazard distance (within RG3 range). The eyes may be damaged by the direct irradiation. It is considered to be safe to look into the projected light from outside the hazard distance (within RG2 range).

RG2

RG3

RG2

RG3

Except ET-D75LE90, ET-D75LE95

rRisk group

The combination of the projector and the projection lens is categorized as the risk group 2 when the hazard distance is less than 1 m (39-3/8"). It is categorized as the risk group 3 when the hazard distance exceeds 1 m

(39-3/8 In case of risk group 3, there is a possibility of damaging the eyes by direct irradiation when looking into the

projection light from inside the hazard distance (within RG3 range). In case of risk group 2, it can be used safely without damaging the eyes in any condition. Combinations with any projection lens are categorized as risk group 3 for this projector. Each dimension inside the hazard distance (within RG3 range) for combination with projection lens which the

hazard distance exceeds 1 m (39-3/8") is as follows.

ET-D75LE10 1.2 0.68 0.68 0.72 0.72 ET-D75LE20 1.7 0.73 0.73 0.78 0.78 ET-D75LE30 3.2 0.94 0.94 1.01 1.01 ET-D75LE40 4.8 0.74 0.74 0.79 0.79 ET-D75LE8 7.8 0.76 0.76 0.81 0.81

), and it will be for professional use instead of consumer use.

Projection lens

Model No.

(Unit: m)

*1 HD: Hazard Distance *2 The values of D1 to D4 will change in accordance with the lens shift amount. Each value in the table is the maximum value.

Note

fThe value in the table is based on IEC 62471-5:2015.

10 - ENGLISH

Read this rst!

WARNING:

rPOWER

The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible

when problems occur. If the following problems occur, cut off the power supply immediately.

Continued use of the projector in these conditions will result in re or electric shock, or will cause visual impairment.

fIf foreign objects or water get inside the projector, cut off the power supply. fIf the projector is dropped or the cabinet is broken, cut off the power supply. fIf you notice smoke, strange smells or noise coming from the projector, cut off the power supply.

Please contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.

During a thunderstorm, do not touch the projector or the cable.

Electric shocks can result.

Do not do anything that might damage the power cord or the power plug.

If the power cord is used while damaged, electric shocks, short-circuits or re will result.

fDo not damage the power cord, make any modications to it, place it near any hot objects, bend it

excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.

Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.

Do not use anything other than the provided power cord.

Failure to observe this will result in electric shocks or re. Please note that if you do not use the provided power cord to ground the device on the side of the outlet, this may result in electric shocks.

Completely insert the power plug into the wall outlet and the power connector into the projector terminal.

If the plug is not inserted correctly, electric shocks or overheating will result.

fDo not use plugs which are damaged or wall outlets which are coming loose from the wall.

Do not handle the power plug and power connector with wet hands.

Failure to observe this will result in electric shocks.

Use an outlet supporting 15 A independently.

Using an outlet together with another device may result in res due to heat generation.

Do not overload the wall outlet.

If the power supply is overloaded (ex., by using too many adapters), overheating may occur and re will result.

Clean the power plug regularly to prevent it from becoming covered in dust.

Failure to observe this will cause a re.

fIf dust builds up on the power plug, the resulting humidity can damage the insulation. fIf not using the projector for an extended period of time, pull the power plug out from the wall outlet.

Pull the power plug out from the wall outlet and wipe it with a dry cloth regularly.

rON USE/INSTALLATION

Do not place the projector on soft materials such as carpets or sponge mats.

Doing so will cause the projector to overheat, which can cause burns, re or damage to the projector.

Do not set up the projector in humid or dusty places or in places where the projector may come into contact with oily smoke or steam.

Using the projector under such conditions will result in re, electric shocks or deterioration of components. Oil may also distort the plastic and the projector could fall such as when mounted on the ceiling.

Do not install this projector in a place which is not strong enough to take the full weight of the projector or on top of a surface which is sloped or unstable.

Failure to observe this will cause projector to fall down or tip over the projector, and severe injury or damage could result.

Do not install the projector in a location where people pass through.

People may bump into the projector or trip on the power cord, which may result in re, electric shock, or injury.

Do not cover the air intake/exhaust ports or place anything within 500 mm (19-11/16") of them.

Doing so will cause the projector to overheat, which can cause re or damage to the projector.

fDo not place the projector in narrow, badly ventilated places. fDo not place the projector on cloth or papers, as these materials could be drawn into the air intake port.

ENGLISH - 11

Read this rst!

WARNING:

Do not look at or place your skin into the light emitted from the lens while the projector is being used.

Do not enter the projection luminous ux using an optical device (such as magnier or mirror).

Doing so can cause burns or loss of sight.

fStrong light is emitted from the projector’s lens. Do not look at or place your hands directly into this light. fBe especially careful not to let young children look into the lens. In addition, turn off the power and switch

off the main power when you are away from the projector.

Do not project an image with the lens cover of the projection lens (optional) attached.

Doing so can cause re.

Never attempt to remodel or disassemble the projector.

High voltages can cause re or electric shocks.

fFor any inspection, adjustment and repair work, please contact an Authorized Service Center.

Do not allow metal objects, ammable objects, or liquids to enter inside of the projector. Do not allow

the projector to get wet.

Doing so may cause short circuits or overheating, and result in re, electric shock, or malfunction of the

projector.

fDo not place containers of liquid or metal objects near the projector. fIf liquid enters inside of the projector, consult your dealer. fParticular attention must be paid to children.

Use the ceiling mount bracket specied by Panasonic.

Using the ceiling mount bracket other than the specied one will result in falling accidents.

fAttach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down.

Installation work such as mounting the projector on the ceiling should only be carried out by a qualied

technician.

If installation is not carried out and secured correctly, it can cause injury or accidents, such as electric shocks.

rACCESSORIES

Do not use or handle the batteries improperly, and refer to the following.

Failure to observe this will cause burns, batteries to leak, overheat, explode or catch re.

fDo not use unspecied batteries. fDo not charge dry cell batteries. fDo not disassemble dry cell batteries. fDo not heat the batteries or place them into water or re. fDo not allow the + and – terminals of the batteries to come into contact with metallic objects such as

necklaces or hairpins.

fDo not store or carry batteries together with metallic objects. fStore the batteries in a plastic bag and keep them away from metallic objects. fMake sure the polarities (+ and –) are correct when inserting the batteries. fDo not use a new battery together with an old battery or mix different types of batteries. fDo not use batteries with the outer cover peeling away or removed.

If the battery uid leaks, do not touch it with bare hands, and take the following measures if necessary.

fBattery uid on your skin or clothing could result in skin inammation or injury.

Rinse with clean water and seek medical advice immediately.

fBattery uid coming in contact with your eyes could result in loss of sight.

In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.

Do not allow children to reach the lens xing screw, the lens hood screws, and the knurled head

screws.

Accidentally swallowing them can cause physical harm.

fIf swallowed, seek medical advice immediately.

Remove the depleted batteries from the remote control promptly.

fLeaving them in the unit may result in uid leakage, overheating, or explosion of the batteries.

12 - ENGLISH

Read this rst!

CAUTION:

rPOWER

When disconnecting the power cord, be sure to hold the power plug and power connector.

If the power cord itself is pulled, the lead will become damaged, and re, short-circuits or serious electric shocks will result.

When not using the projector for an extended period of time, disconnect the power plug from the wall

outlet.

Failure to do so may result in re or electric shock.

Before replacing the projection lens, be sure to turn off the power and disconnect the power plug from

the wall outlet.

fUnexpected projection of light may cause injury to eyes. fReplacing the projection lens without removing the power plug may result in electric shock.

Disconnect the power plug from the wall outlet before carrying out any cleaning.

Failure to do so may result in electric shock.

rON USE/INSTALLATION

Do not place heavy objects on top of the projector.

Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage or injury. The projector will be damaged or deformed.

Do not put your weight on this projector.

You could fall or the projector could break, and injury will result.

fBe especially careful not to let young children stand or sit on the projector.

Do not place the projector in extremely hot locations.

Doing so will cause the outer casing or internal components to deteriorate, or result in re.

fTake particular care in locations exposed to direct sunlight or near heaters.

Do not place your hands in the openings beside the optical lens, while shifting the lens.

Failure to observe this could cause injury.

Do not install the projector in a location where salt pollution or corrosive gas may occur.

Doing so may result in falling due to corrosion. Also, it may result in malfunctions.

Do not stand in front of the lens while the projector is being used.

Doing so can cause damage and burns to clothing.

fStrong light is emitted from the projector’s lens.

Do not place objects in front of the lens while the projector is being used. Do not block the projection by placing an object in front of the projection lens.

Doing so can cause re, damage to an object, or malfunction of the projector.

fStrong light is emitted from the projector’s lens.

The projector must be carried or installed by two or more people.

Failure to do so may cause falling accidents.

Always disconnect all cables before moving the projector.

Moving the projector with cables still attached can damage the cables, which will cause re or electric shocks to

occur.

When mounting the projector on the ceiling, keep mounting screws and power cord from contact with

metal parts inside the ceiling.

Contact with metal parts inside the ceiling can cause electric shocks.

ENGLISH - 13

Read this rst!

CAUTION:

rACCESSORIES

When not using the projector for an extended period of time, remove the batteries from the remote

control.

Failure to observe this will cause the batteries to leak, overheat, catch re or explode, which may result in re or contamination of surrounding area.

rMAINTENANCE

Ask your dealer about cleaning inside the projector every 20 000 hours of usage as an estimated duration.

Continuous use while dust is accumulated inside the projector may result in re.

fFor cleaning fee, ask your dealer.

rVIEWING 3D VIDEO

Those with a medical history of oversensitivity to light, heart problems, or poor physical health should

not view 3D images.

This may lead to a worsening of medical conditions.

If you feel tiredness or discomfort, or other abnormality while viewing with 3D Eyewear, discontinue

viewing.

Continuing use may cause health problems. Take a break as necessary.

When viewing 3D movies, aim to view one movie at a time and take a break as necessary.

When viewing 3D images, for example when playing 3D games or using a PC where two way interaction is possible, take an appropriate break every 30 to 60 minutes.

Watching for long periods of time may cause eye fatigue.

When preparing contents, use contents properly created to be used for 3D.

This may cause eye fatigue or health problems.

When viewing 3D images, pay attention to people and objects in the vicinity.

3D video may be mistaken for actual objects, and the related bodily movements can cause damage to objects and lead to injury.

Use 3D Eyewear when viewing 3D videos.

Do not tilt your head when viewing with 3D Eyewear.

Those who are near or far sighted, those with weaker eyesight in one eye, or those with astigmatism

should use corrective glasses etc. when using 3D Eyewear.

If the image appears distinctly double when viewing 3D video, discontinue viewing.

Watching for long periods of time may cause eye fatigue.

View at a distance of at least three times the effective height of the screen.

Viewing at distance closer than the recommended distance may cause eye fatigue. As with movies, if there are black bands at the top and bottom of the video, view at a distance of 3 times or more of the height of the video

section.

Children younger than 5 or 6 years old should not use 3D Eyewear.

As it is difcult to gauge the reactions of children to fatigue and discomfort their condition may worsen suddenly. If a child uses the 3D Eyewear, guardians should beware of the child’s eyes becoming tired.

14 - ENGLISH

To remove the battery

Remote Control Battery

Read this rst!

1. Press the guide and lift the cover.

(ii)

(i)

2. Remove the batteries.

Brazil Only

Brasil Apenas

rManuseio de baterias usadas

BRASIL

Após o uso, as pilhas e/ou baterias deverão ser entregues ao estabelecimento comercial

ou rede de assistência técnica autorizada.

Cobrir os terminais positivo (+) e negativo (-) com uma ta isolante adesiva, antes de depositar numa caixa destinada para o recolhimento. O contato entre partes metálicas pode causar vazamentos, gerar calor, romper a blindagem e produzir fogo. (Fig. 1)

Fig. 1 Como isolar os terminais

Não desmonte, não remova o invólucro, nem amasse a bateria. O gás liberado pela bateria pode irritar a garganta, danicar o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos terminais. Não incinere nem aqueça as baterias, elas não podem car expostas a temperaturas superiores a 100 °C (212 °F). O gás liberado pela bateria pode irritar a garganta, danicar o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos terminais provocado internamente. Evite o contato com o liquido que vazar das baterias. Caso isto ocorra, lave bem a parte afetada com bastante água. Caso haja irritação, consulte um médico.

Fita Isolante

rRemoção das baterias

1. Pressione a guia e levante a tampa.

(ii)

2. Remova as baterias.

(i)

ENGLISH - 15

rTrademarks

f SOLID SHINE is a trademark of Panasonic Corporation. f Windows and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the United

States and other countries.

f Mac, macOS, and Safari are trademarks of Apple Inc., registered in the United States and other countries.

f PJLink

regions.

f DLP is a trademark or registered trademark of Texas Instruments. f The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

f RoomView and Crestron RoomView are registered trademarks of Crestron Electronics, Inc.

Crestron Connected

f HDBaseT f Art-Net f DisplayPort is a trademark or registered trademark of the Video Electronics Standards Association. f IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. f Android and Google Chrome are trademarks of Google LLC. f Adobe, Adobe Flash Player, and Adobe Reader are trademarks or registered trademarks of Adobe Systems Inc.

in the United States and/or other countries.

f RealD 3D is a trademark of RealD Inc. f Some of the fonts used in the on-screen menu are Ricoh bitmap fonts, which are manufactured and sold by

Ricoh Company, Ltd.

f All other names, company names, and product names mentioned in this manual are trademarks or registered

trademarks of their respective owners. Please note that the

is a registered trademark or pending trademark in Japan, the United States, and other countries and

and Fusion RV are trademarks of Crestron Electronics, Inc.

is a trademark of HDBaseT Alliance.

and TM symbols are not specied in this manual.

rIllustrations in this manual

f Illustrations of the projector, screen, and other parts may vary from the actual product. f Illustrations of the projector with the power cord attached are only examples. The shape of the supplied power

cords varies depending on the country where you purchased the product.

rReference pages

f Reference pages in this manual are indicated as (x page 00).

rTerm

f In this manual, the “Wireless/wired remote control unit” accessory is referred to as “Remote control”.

16 - ENGLISH

Features of the Projector

High luminance and high contrast

▶ With the high efcient optical system

that maximizes the output of the solidstate light source, and unique drive system, despite the compact body, high luminance of 20 000 lm and high contrast

of 20 000:1 high color reproduction. Also, high-contrast image content supported by HDR (High Dynamic Range) can be reproduced as a projected image.

*1 When [DYNAMIC CONTRAST] is set to [3]

Supporting wide variety of usages and renderings

are realized in addition to the

Quick Steps

For details, refer to the corresponding pages.

1. Set up the projector.

(x page 36)

2. Attach the projection lens (optional).

(x page 49)

3. Connect with external devices. (x page 52)

4. Connect the power cord. (x page 59)

▶ In addition to the DIGITAL LINK support,

Art-Net support, and abundant lineup of optional lenses, the projector has inherited installation property with wide latitude that supports all 360° direction projection utilizing the feature of solid-state light source. Advanced rendering in wide range of usages is now possible.

Long life and high reliability

▶ In addition to adopting the solid-state light

source with long life, it has enhanced the dust resistance property of the optical unit that is sensitive to dust. By eliminating the lter, the long-period maintenance cost is reduced drastically.

5. Switch on the projector. (x page 61)

6. Make initial settings. (x page 62) Set the lens type. (x page 73) Execute the lens calibration. (x page 73)

f Take this step when you switch on the

power for the rst time after purchasing the

projector.

7. Select the input signal. (x page 70)

8. Adjust the image. (x page 71)

ENGLISH - 17

Chapter 1 Preparation

This chapter describes things you need to know or check before using the projector.

18 - ENGLISH

Chapter 1 Preparation — Precautions for use

Precautions for use

Cautions when transporting

f Transport the projector with two or more people. Failure to do so may drop the projector, which may result in

damage or deformation of the projector, or injury.

f When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impact. Failure

to do so may cause a failure due to the damaged internal components.

f Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.

Cautions when installing

rDo not set up the projector outdoors.

The projector is designed for indoor use only.

rDo not set up the projector in the following locations.

f Places where vibration and impacts occur such as in a car or vehicle: Doing so may cause damage to internal

components or malfunction.

f Location close to sea or where corrosive gas may occur: The projector may fall due to corrosion. Also, failure to

do so may shorten the life of the components and result in malfunctions.

f Near the exhaust of an air conditioner: Depending on the conditions of use, the screen may uctuate in rare

cases due to the heated air from the air exhaust port or the hot or cooled air. Make sure that the exhaust from the projector or other equipment, or the air from the air conditioner does not blow toward the front of the

projector.

f Places with sharp temperature uctuations such as near lights (studio lamps): Doing so may shorten the life of

the light source, or result in deformation of the projector due to heat, which may cause malfunctions. Follow the operating environment temperature of the projector.

f Near high-voltage power lines or near motors: Doing so may interfere with the operation of the projector. f Places where there is high-power laser equipment: Directing a laser beam onto the projection lens surface

causes damage to the DLP chips.

rAsk a qualied technician or your dealer for the installation work such as installing to

a ceiling, etc.

To ensure projector performance and safety, ask a qualied technician or your dealer when installing to a ceiling or in a high place.

rAsk a qualied technician or your dealer to install the cable wiring for DIGITAL LINK

connection.

Image and sound may be disrupted if cable transmission characteristics cannot be obtained due to inadequate installation.

rThe projector may not work properly due to strong radio wave from the broadcast

station or the radio.

If there is any facility or equipment which outputs strong radio waves near the installation location, install the projector at a location sufciently far from the source of the radio waves. Or, wrap the LAN cable connected to the <DIGITAL LINK/LAN> terminal using a piece of metal foil or a metal pipe which is grounded at both ends.

rFocus adjustment

The high clarity projection lens is thermally affected by the light from the light source, making the focus unstable in the period just after switching on the power.

It is recommended to perform the focus adjustment after 30 minutes have elapsed with the focus test pattern displayed. For details of the test pattern, refer to “[TEST PATTERN] menu” (x page 177).

rDo not install the projector at an altitude of 4 200 m (13 780') or higher above sea level.

ENGLISH - 19

Chapter 1 Preparation — Precautions for use

rDo not use the projector in a location that the ambient temperature exceeds 50 °C

(122 °F).

Using the projector in a location that the altitude is too high or the ambient temperature is too high may reduce the life of the components or result in malfunctions.

Upper limit of the operating environment temperature varies depending on the altitude above sea level. When using the projector at an altitude between 0 m (0') and 1 400 m (4 593') above sea level: 0 °C (32 °F) to

50 °C (122 °F) When using the projector at an altitude between 1 400 m (4 593') and 4 200 m (13 780') above sea level: 0 °C

(32 °F) to 45 °C (113 °F)

rProjection in all 360° direction is possible.

360°

360° vertically 360° horizontally 360° tilted

360°

(combination of vertical and horizontal)

360°

Cautions when setting up the projector

f Install the projector in a place or with a mount that can sufciently tolerate the weight. The position of the

projected image may shift if the strength is not sufcient.

f Use the adjustable feet only for the oor standing installation and for adjusting the angle. Using them for other

purposes may damage the projector.

f The adjustable feet can be removed if not needed in the installation. However, do not use the screw holes

where the adjustable feet were removed to x the projector to a mount. Also, do not attach any screws not instructed in the operating instructions of the optional accessories into the

screw holes where the adjustable feet are removed. Doing so may damage the projector.

f When using the projector in any method other than the oor installation using the adjustable feet or ceiling

mounting installation using the Ceiling Mount Bracket, remove the four adjustable feet and use the six screw holes (as shown in the gure) to x the projector to a mount.

20 - ENGLISH

Chapter 1 Preparation — Precautions for use

f Use a torque screwdriver or Allen torque wrench to tighten the xing screws to their specied tightening torques.

Do not use electric screwdrivers or impact screwdrivers. (Screw diameter: M6, tapping depth inside the projector: 27 mm (1-1/16"), screw tightening torque: 4 ± 0.5 N·m)

Unit: mm

Adjustable feet

Screw holes to fix the projector

Thread engagement depth

27 (1-1/16")

10 (13/32")

Embedded nut (thread engagement depth)

Mount

Screw hole maximum depth

Adjustable feet

Screw tightening torque: (M6) 4 ± 0.5 N·m

Positions of screw holes to fix projector and

adjustable feet

Embedded nut

f When using two projectors stacked on each other, take a measure to prevent falling just in case. Or, use the

optional Frame (Model No.: ET-PFD510).

f Do not stack three or more projectors. f Do not use the projector supporting it by the top. f Do not block the ventilation ports (intake and exhaust) of the projector.

ENGLISH - 21

Chapter 1 Preparation — Precautions for use

f Prevent hot and cool air from the air conditioning system to blow directly to the ventilation ports (intake and

exhaust) of the projector.

500 mm (19-11/16") or longer

100 mm (3-15/16") or longer

f Do not install the projector in a conned space.

When installing the projector in a conned space, provide air conditioning or ventilation separately. Exhaust heat may accumulate when the ventilation is not enough, triggering the protection circuit of the projector.

f Panasonic takes no responsibility for any damage to the product caused by an inappropriate choice of location

for installing the projector, even if the warranty period of the product has not expired.

Security

When using this product, take safety measures against the following incidents.

f Personal information being leaked via this product f Unauthorized operation of this product by a malicious third party f Interfering or stopping of this product by a malicious third party

Take sufcient security measures.

f Make your password difcult to guess as much as possible. f Change your password periodically. A password can be set in the [SECURITY] menu → [SECURITY

PASSWORD CHANGE].

f Panasonic Corporation or its afliate companies will never ask for your password directly. Do not divulge your

password in case you receive such inquiries.

f The connecting network must be secured by a rewall, etc. f Set a password for the web control and restrict the users who can log in. A password for the web control can be

set in the [Change password] page of the web control screen.

22 - ENGLISH

Chapter 1 Preparation — Precautions for use

DIGITAL LINK

“DIGITAL LINK” is a technology to transmit the video, audio, Ethernet, and serial control signals using a twisted pair cable by adding unique functions by Panasonic to the HDBaseTTM communication standard formulated by HDBaseT Alliance.

This projector supports the optional Panasonic DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) and peripheral devices by other manufacturers (twisted-pair-cable transmitters such as the “XTP transmitter” of Extron Electronics) that use the same HDBaseT manufacturers that the operation has been veried with this projector, visit the Panasonic website (https:// panasonic.net/cns/projector/). Note that the verication for devices of other manufacturers has been made for the items set by Panasonic Corporation, and not all the operations have been veried. For operation or performance problems caused by the devices of other manufacturers, contact the respective manufacturers. This projector does not support audio transmission because it is not equipped with audio function.

standard. For the devices of other

Art-Net

“Art-Net” is an Ethernet communication protocol based on the TCP/IP protocol. By using the DMX controller and the application software, illumination and stage system can be controlled. Art-Net

is made based on DMX512 communication protocol.

Application software supported by the projector

The projector supports following application software. For details or downloading each application software, visit the Panasonic website (https://panasonic.net/cns/projector/).

f Logo Transfer Software

This software transfers the original image, such as company logo, which is projected at the start, to the

projector.

f Smart Projector Control

This software sets and adjusts the projector connected via LAN using a smartphone or a tablet.

f Multi Monitoring & Control Software

This software monitors and controls the multiple display devices (projector and at panel display) connected to

the Intranet.

f Early Warning Software

This plug-in software monitors the status of the display devices and their peripherals within an intranet, and noties of abnormality of such equipment and detects the signs of possible abnormality. “Early Warning Software” is pre-installed in the “Multi Monitoring & Control Software”. To use the early warning function of this plug-in software, install “Multi Monitoring & Control Software” in the PC to be used. By enabling the early warning function, it will notify of the approximate time to replace the consumables for the display devices, to clean each part of the display devices, and to replace the components of the display devices, allowing to execute maintenance in advance.

The early warning function can be used by registering maximum of 2048 display devices free of charge for 90 days after installing the “Multi Monitoring & Control Software” into a PC. To continuously use after the 90 days, it is necessary to purchase the license of “Early Warning Software” (ET-SWA100 Series) and perform the activation. Also, depending on the type of license, the number of display devices that can be registered for monitoring varies. For details, refer to the Operating Instructions of “Multi Monitoring & Control Software”.

Storing

To store the projector, store in a dry room.

Disposal

To dispose of the product, ask your local authorities or dealer for correct methods of disposal. Also, dispose of the product without disassembling.

Cautions on use

rTo get a good picture quality

In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from

shining onto the screen.

ENGLISH - 23

Chapter 1 Preparation — Precautions for use

rDo not touch the surface of the projection lens with your bare hands.

If the surface of the projection lens becomes dirty from ngerprints or anything else, this will be magnied and

projected onto the screen.

Attach the supplied lens cover to the optional projection lens when not using the projector.

rDLP chips

f The DLP chips are precision-made. Note that in rare cases, pixels of high precision could be missing or always

lit. Such a phenomenon does not indicate malfunction.

f Directing a high-power laser beam onto the projection lens surface can damage the DLP chips.

rDo not move the projector or subject it to vibration or impact while it is operating.

Doing so may shorten the life of the built-in motor.

rLight source

The light source of the projector uses lasers, and has the following characteristics.

f Depending on the operating environment temperature, the luminance of the light source will decrease.

The higher the temperature becomes, the more the luminance of the light source decreases.

f The luminance of the light source will decrease by duration of usage.

If brightness is noticeably reduced and the light source does not turn on, ask your dealer to clean inside the projector or replace the light source unit.

rComputer and external device connections

f When connecting a computer or an external device, read this manual carefully regarding the use of power cords

and shielded cables as well.

rViewing 3D images

The projector can display the 3D video signal input in various formats such as “frame packing”, “side by side”, etc. You are required to prepare external devices for viewing 3D images (such as 3D eyewear, video signal output

devices) which are suitable for your 3D system. Connections of the projector and external devices vary depends on the 3D system to be used, see the operating instructions of external devices you use.

Refer to “List of 3D compatible signals” (x page 246) for the types of 3D video signals that can be used with the

projector.

24 - ENGLISH

Chapter 1 Preparation — Precautions for use

Accessories

Make sure that the following accessories are provided with your projector. Numbers enclosed in < > show the number of accessories.

Wireless/wired remote control unit <1>

(N2QAYB001052 [N2QAYB001176])

(N2QAYB001176 is the same remote control unit as

N2QAYB001052.)

Power cord

(K2CM3YY00007): for 200 V - 240 V

(K2CT3YY00053): for 200 V - 240 V

Lens hole cover <1>

(1GE1RZ21K)

(Attached to the product at the time of purchase)

CD-ROM <1>

(1JK1RZ21KE)

(Operating Instructions are included.)

AA/R6 or AA/LR6 battery <2>

(For remote control unit)

(K2CG3YY00035): for 200 V - 240 V

(K2CG3YY00189): for 110 V - 120 V

(K2CZ3YY00058): for 200 V - 240 V

(K2CZ3YY00032): for 200 V - 240 V

For Taiwan (K2CZ3YY00081) <1>

Lens xing screw <1>

(XYN4+J18FJ)

Lens hood 1 <1>

(7MHRZ31KU)

Lens hood 2 <1>

(8MHRZ31KU)

Lens hood mounting plate 1 <1>

(DPMH1090ZA)

ENGLISH - 25

Chapter 1 Preparation — Precautions for use

Lens hood mounting plate 2 <1>

(DPMH1089ZA)

Lens hood screw <6>

(XYN4+F8FJK)

Knurled head screw <6>

(DPHD1026ZA)

Attention

f After unpacking the projector, discard the power cord cap and packaging material properly. f Do not use the supplied power cord for devices other than this projector. f For missing accessories, consult your dealer. f Store small parts in an appropriate manner, and keep them away from small children.

Note

f The lens hood needs to be mounted to the projector when an interchangeable projection lens is used under the condition

that throw ratio is greater than 3.0 in the North America region. Always ask a qualied technician or your dealer to mount the lens hood. The throw ratio described here is a value calculated by dividing the actual projection distance by the projected image width. The lens hood is assembled and mounted to the projector using the following supplied components. Lens hood 1, Lens hood 2, Lens hood mounting plate 1, Lens hood mounting plate 2, Lens hood screws, Knurled head screws For the assembly and attachment, refer to the separate document “Mounting the lens hood”. The components and document of the lens hood may not be supplied depending on the country or region where you purchased the product.

f The type and number of the supplied power cords vary depending on the country or region where you purchased the

product.

f The model numbers of accessories are subject to change without prior notice.

26 - ENGLISH

Optional accessories

Chapter 1 Preparation — Precautions for use

Optional accessories

(product name)

Projection lens

Stepping Motor Kit ET-D75MKS10 Lens Fixed Attachment ET-PLF10

Ceiling Mount Bracket

Frame ET-PFD510 Early Warning Software

(Basic license/3-year license)

Upgrade Kit ET-UK20 Auto Screen Adjustment

Upgrade Kit

Auto Screen Adjustment Upgrade Kit (PC)

Digital Interface Box ET-YFB100G DIGITAL LINK Switcher ET-YFB200G

*1 The sufx of the Model No. differs according to the license type.

Zoom Lens

Fixed-focus Lens ET-D75LE50, ET-D75LE95

ET-PKD520H (for High Ceilings), ET-PKD520S (for Low Ceilings), ET-PKD520B (Projector

Mount Bracket)

ET-SWA100 Series

ET-CUK10

ET-CUK10P

ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20, ET-D75LE30, ET-D75LE40

Note

Model No.

f The Fixed-focus Lens (Model No.: ET-D75LE90) (production discontinued) can also be used. f The Stepping Motor Kit (Model No.:ET-D75MKS10) is a product to replace the standard DC motor unit installed in the Zoom

Lens (Model No.: ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20, ET-D75LE30, ET-D75LE40) with the stepping motor unit. For how to replace the motor of the Zoom Lens, refer to the Operating Instructions of the Stepping Motor Kit.

f The model numbers of optional accessories are subject to change without prior notice. f The optional accessories described in this document are as of September 2017. Optional accessories may be added or

changed without prior notice. For the latest information, visit the Panasonic website (https://panasonic.net/cns/projector/).

ENGLISH - 27

Chapter 1 Preparation — About your projector

About your projector

Remote control

Front Top

2 3

1 Remote control indicator

Blinks if any button in the remote control is pressed.

2 Power on <b> button

Sets the projector to projection mode when the <MAIN POWER> switch on the projector is set to <ON> and the power is turned off (standby mode).

3 Power standby <v> button

Sets the projector to the state where the projector is turned off (standby mode) when the <MAIN POWER> switch on the projector is set to <ON> and in projection mode.

4 <MENU> button/<ENTER> button/asqw buttons

Used to navigate through the menu screen. (x page 85)

5 <ON SCREEN> button

Switches the on-screen display function on (display) or off (hide). (x page 80)

6 <AUTO SETUP> button

Automatically adjusts the image display position while projecting the image. [PROGRESS] is displayed while in automatic adjustment. (x page 81)

7 <ASPECT> button

Switches the aspect ratio of the image. (x page 81)

8 Number (<0> - <9>) buttons

Used for entering an ID number or a password in a multiple projector environment.

9 <STATUS> button

Displays the projector information.

10 <LIGHT> button

Pressing this button lights up the remote control buttons. The lights will go off when the remote control operation goes idle for 10 seconds.

11 <INPUT MENU> button

Displays the input selection screen. (x page 71)

Bottom

A strap can be attached depending on the usage.

12 Input selection buttons (<RGB1>, <RGB2>, <VIDEO>,

<S-VIDEO Y/C>, <DIGITAL LINK>, <DVI-D>, <HDMI>, <SDI>)

Switches the input signal to project. (x page 70)

The <DISPLAY PORT> button, the <SLOT1> button, and the

<SLOT2> button are not used with the projector.

13 <SHUTTER> button

Used to temporarily turn off the image. (x page 80)

14 <TEST PATTERN> button

Displays the test pattern. (x page 82)

15 Lens buttons (<FOCUS>, <ZOOM>, <SHIFT>)

Adjusts the focus, zoom, and lens shift. (x page 71)

16 <FUNCTION> button

Assigns a frequently used operation as a shortcut button. (x page 81)

17 <DEFAULT> button

Resets the content of the sub-menu to the factory default. (x page 86)

18 <ID SET> button

Sets the ID number of the remote control in a multiple projector environment. (x page 33)

19 <ID ALL> button

Used to simultaneously control all the projectors with a single remote control in a multiple projector environment. (x page 33)

20 <LOCK> button

Used to prevent unintended operation by careless pressing of the buttons and prevent draining the remote control batteries. Operation of each button on the remote control is disabled by sliding the <LOCK> button toward the arrow.

21 Remote control signal transmitter

22 Remote control wired terminal

This is a terminal used to connect to the projector via a cable when the remote control is used as a wired remote control. (x page 34)

23 Strap hole

Attention

f Do not drop the remote control.

28 - ENGLISH

Chapter 1 Preparation — About your projector

f Avoid contact with liquids or moisture. f Do not attempt to modify or disassemble the remote control. f Do not swing the remote control holding onto the strap when a strap is attached. f Observe the following instructions that are indicated on the caution label at the back of the remote control:

g Do not use old battery with new one. g Do not use batteries other than the type specied. g Be sure the batteries are inserted properly.

For other instructions, read the instructions related to batteries that are described in “Read this rst!”.

1.Do not use old battery with new one.

2.Do not use batteries other than the type specified.

3.Be sure the batteries are inserted properly.

N2QAYB001052

Made in China

Caution label at the back of the remote control

Note

f When operating the remote control by directly pointing the remote control signal receiver of the projector, operate the remote control at

a distance approx. 30 m (98'5") or shorter from the remote control signal receiver. The remote control can control at angles of up to ±15° vertically and ±30° horizontally, but the effective control range may be reduced.

f If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate properly. f The signal will be reected off the screen. However, the operating range may be limited from light reection loss due to the screen material. f If the remote control signal receiver directly receives strong light, such as uorescent light, the remote control may not operate properly. Use

it in a place distant from the light source.

f The power indicator <ON (G)/STANDBY (R)> will blink if the projector receives a remote control signal.

ENGLISH - 29

Projector body

Chapter 1 Preparation — About your projector

Front

1 2 345

6 67

Rear

Side

10 11

139

14 15

Bottom

Projection direction

1 Remote control signal receiver (front)

2 Power indicator <ON (G)/STANDBY (R)>

Indicates the status of the power.

Attention

3 Light source indicator <LIGHT1>

Indicates the status of light source 1.

4 Light source indicator <LIGHT2>

Indicates the status of light source 2.

5 Temperature indicator <TEMP>

Indicates the internal temperature status.

6 Adjustable feet

Adjusts the projection angle.

7 Air intake port

8 Remote control signal receiver (rear)

9 Air exhaust port

10 Control panel (x page 31) 11 Connecting terminals (x page 32)

12 Security slot

This security slot is compatible with the Kensington security cables.

13 Power cord holder

(Except for PT-RZ21KD)

14 <AC IN> terminal

Connect the supplied power cord.

15 <MAIN POWER> switch

Turns on/off the main power.

16 Security bar

A wire, etc., can be attached to prevent theft.

f Do not block the ventilation ports (intake and exhaust) of the projector.

30 - ENGLISH

+ 227 hidden pages