Panasonic PT-RZ12KU Product Sheet
PT-RZ12K Series
3-Chip DLP™ Projectors
PT-RZ12K
PT-RS11K
Taking Laser Projection to a Whole New Level.
Lenses sold separately.
Reference Laser
ity in locations with dust contaminatio
Performance That
3-Chip DLP™ Projection Meets Next-Generation SOLID SHINE Laser
Lasts Longer
The 12,000 lm PT-RZ12K 3-Chip DLP™ Series
projectors combine class-leading imaging with the
practical advantages of Panasonic SOLID SHINE
Laser technology: minimal picture quality degradation
over long periods in continuous use, 20,000-hour
maintenance-free operation*
failsafe reliability, and a wealth of powerful features
for creative visual presentations in large spaces.
3-Chip DLP™ Projectors
PT-RZ12K
PT-RS11K
12,000 lm
12,000 lm
1
, exible installation,
WUXGA
SXGA+
Bright and Vivid Picture Quality
Combining 3- Chip DLP™ imaging with Panasonic’s original SOLID SHINE
Laser technology, the PT-RZ12K Series achieves truly stunning picture
quality. Two powerful solid-state laser light sources, a heat-resistant
phosphor wheel, and three independent DLP™ chips for red, green, and
blue ensures class-leading brightness, color accuracy, and contrast.
Eco Filter Extends
Replacement to
20,000 Hours*
The Eco Filter has an electrostatic
Micro Cut Filter that collects
minute dust particles with an ion
effect. It joins with a dust-
resistant cabinet to enable
long-term use even in punishing
conditions. A long maintenance
cycle of up to 20,000 hours*
reduces hassle, and the eco-
friendly washable lter*
reused, reducing cost and waste.
2
3
can be
2
Dustproof for Ultimate Endurance
The PT-RZ12K Series has hermetically sealed laser modules, a
long-life Eco Filter, and a new air-intake system to extend life
and maintain picture quality in locations with dust contamination.
SOLID SHINE Laser
products exceed rigorous
dustproong requirements
for operation in
environments containing
0.150 mg of dust per cubic
4
meter*
.
s
ic
Heat-resistant phosphor wheel
ensures high brightness and
excellent reliability for long periods.
Accurate Color Reproduction
The PT-RZ12K Series captures a more accurate Rec. 709-compliant
color space than comparable laser projectors. A blue laser ensures
greater precision while an expanded color gamut improves white
balance accuracy.
Ultra-Durable Laser
Optical Engine for Continuous
24-hour Operation
Dual Drive Laser Optical Engine uses two discrete
light sources grouping laser diodes into modules.
A failsafe laser light source redundancy circuit
ensures minimal reduction in brightness and color
uniformity in the event of laser diode failure, making
PT-RZ12K Series ideal for mission-critical
applications. Further, brightness decreases gradually
and in a linear rather than exponential fashion (as is
common to lamp-based projectors) over its
20,000-hour
1
maintenance-free service life.
*
2
Efficient Cooling System Assures Reliable Operation
The PT-RZ12K Series employs a newly developed direct liquid cooling system for the
laser light source that features a redesigned air intake and a solid aluminum heat sink to
suppress temperature rises. This allows stable operation in ambient temperatures of up
to 50 °C (122 °F)*
*1 At this time the brightness will have decreased to approximately half of its original level (Dynamic Contrast Mode: 3, Image Mode: Dynamic). Panasonic recommends cleaning or checkup at point of purchase after every 20,000-hour period (approximately ). Light source
lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period. *2 Usage environment may affect filter maintenance cycle. *3 Please follow the procedures listed in the operating instructions
when washing the filter with water. Replacement is recommended after filter has been washed and reused twice, or if filter is not sufficiently clean after washing. *4 Dustproof tests are conducted to confirm operational effectiveness under conditions with 0.15 mg/m3 of
particulate matter (based on tests by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers [ ASHRAE], and the Japanese Building Maintenance Association). Measurements are made using acceleration tests. *5 When operational mode is set to Normal,
operating temperature is from 0 °C (32 °F ) to 50 °C (122 °F), and operating temperature is from 0 °C ( 32 °F) to 45 °C (113 °F ) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,780 ft) above sea level. When operational mode is set to Eco or Long Life 1/2 /3,
operating temperature is from 0 °C (32 °F) to 45 °C (113 °F ). When used with Smoke Cut Filter, operating temperature is from 0 °C (32 °F ) to 40 °C (104 °F). Projector cannot be used in locations over 2,700 m (8,858 ft ) with operational mode set to Eco or Long Life 1/2/ 3.
When used with Smoke Cut Filter, the projector cannot be used in locations over 1,400 m (4,593 ft). Light source brightness may decrease depending on operating temperature. When projector is operating at high temperature, brightness will decrease correspondingly.
5
while reducing operating noise to just 43 dB.
3
Loading...