The evolution of 3-Chip DLP™ SOLID SHINE Laser culminates in the PT-RZ31K
Series, a flagship forged by end-user experience with 31,000-lumen
(Center/High Mode)*1 of brightness for rental/staging events. Convenient
on-site rigging and dust-resistant optics push service-free projection beyond
20,000 hours*2 in Normal Mode for permanent installations. In every detail,
these flagships make elite performance last longer.
Lighting Up the Rio 2016 Olympic Games
Opening Ceremony
As Ofcial Worldwide Olympic Partner, Panasonic supplied about 110 projectors—including a
prototype PT-RZ31K Series SOLID SHINE L aser projector—to light up the Opening Ceremony
at the Rio 2016 Olympic Games. Chosen for high brightness, brilliant color performance, and
advanced mapping capabilities, the projectors performed awlessly throughout the event.
PT-RZ31K SERIES
PT-RZ31K
Resolution
Brightness
Contrast
*1 Luminance measured at center of screen in High Mode. Operation in High Mode may reduce maintenance timing in comparison to use in
Normal Mode. *2 At this time the brightness will have decreased to approximately 50 % of its original level (Normal Mode, Dynamic Contrast
Mode: 3, Image Mode: Dynamic, IEC62087: 2008 Broadcast Content, dust density of 0.15 mg/m3). Optional Long Life Filter is required for
continuous 20,000 hours operation. In High Mode, no maintenance required for 4,000 hours. *3 Luminance measured in High Mode.
Operation in High Mode may reduce maintenance timing in comparison to use in Normal Mode.
WUXGA
31,000 lm (C enter) *
20,000:1
3-Chip DLP™ Projectors
PT-RS30K
1
/ 30,0 00 lm*
SXGA+
3
2
Lenses sold separately.
Page 3
SOLID SHINE Laser: World-beating Performance, Stability, and Stamina
Superior Brightness Meets True-to-Life Color
Accuracy
Combining 3-Chip DL P™ imaging with original SOLID S HINE
Laser Phosphor technology, the P T-RZ31K Series produces
detail-rich and vividly colored pictures with best-in-class*
31,000 lumens brightness (Center)*
2
in High Mode. Dual
1
solid-state laser light-sources and specially engineered
heat-resistant phosphor wheels work together with three
DLP™ modules (R /G/B) for outstanding brightness, color
accuracy, and contrast in large venues.
*1 Claim for Laser Phosphor projectors in its class accurate as of October 2016.
*2 Luminance measured at center of screen in High Mode. Operation in High Mode may
reduce maintenance timing in comparison to use in Normal Mode.
Operational Mode Brightness
Operational ModeBrightnessOperational Hours
High Mode31,000 lm (Center)*2 /
Normal Mode26,000 lm (Center) /
Note: Operational hours (time at which brightness decreases to approximately 50 %) in Normal
Mode is 20,000 hours (Dynamic Contrast Mode: 3, Image Mode: Dynamic, IEC62087: 2008
Broadcast Content, dust density of 0.15 mg/m3). Optional Long Life Filter is required for
20,000 hours continuous operation. In High Mode, brightness will have decreased to
approximately 70 % of its original level after 8,000 hours operation.
The PT-R Z31K Series has hermetically sealed laser modules, durable ltering, and a
new air-intake system to extend life and maintain picture quality in dusty loc ations.
SOLID SHI NE Laser products are tested against more severe guidelines than other
projectors for stable operation in environments cont aining 0.150 mg of dust per
cubic meter*.
* Dustproof tests are conducted to conrm operational effectiveness under conditions with 0.15 mg/m3 of particulate
matter (based on tests by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers [ASHRAE], and
the Japanese Building Maintenance Association). Measurements are made using acceleration tests.
WHO Europe
Clean Environment
0.030mg/m
CLEAN DUSTY
Guideline for
Dust Resistance
3
0.110mg/m
Japanese Building
Maintenance Association
ASHRAE
3
Panasonic Dust Test Standard
0.150mg/m
3
Flexible 360-degree Installation
SOLID SHI NE Laser enables free 360 -degree installation through
any axis. Together with powered lens shift and a wide range of
optional lenses, the projector can be mounted in any way desired
without picture distortion temporarily or in permanent applications.
Horizontal 360 °
Vertical 360 °
Quick Start, Quick Of f
The laser light-source doesn’t require any time to warm up, so
images appear almost instantly with PT-RZ31K Series
projectors. There’s also no cool-down period when tur ning the
power off at the mains—the projector can be turned on and off
Proprietary circuitry analyzes individual frames to
clarify areas of the image containing ne details
and textures. Algorithms pull information from
the super-high, high, medium, and low frequency
bands of the signal, sharpening outlines,
correcting contours, and reducing ringing noise.
Horizontal signal component
Vertical
signal
component
Frequency analysis engine
Detail analysis engine
Low-pass lter
Mid-pass lter
High-pass lter
Super-high-pass lter
Conventional
projector
Detail Clarity
Processor 5
System Daylight View 3 Optimizes
for Mapping and Bright Conditions
Panasonic’s premium System Daylight View 3
stops pictures washing out in bright light and
enhances impact in mapping and multi-projector
applications. It uses sensor information to adjust
sharpness, manipulate gamma curves, and
correct colors to suit on-site conditions.
Off
1234 65
System Daylight View 2
Ideal for bright environments
OFF
ON
Enhancement Level
System Daylight View 3
Ideal for mapping
Projection Mapping (Projection Onto Buildings)Auditoriums and Halls (Projection in Bright Environments)
OFF
ON
Selectable Operational Modes
Select your preferred operational mode to
control brightness decline according to
application. High Mode maintains 70 %
brightness over 8,000 hours*2 with linear
declination and minimal uctuation. In Normal
Mode, linear brightness decline is about 50 %
over 20,000 hours*3 of continuous operation with
no maintenance required.
Lumens
31,000
26,000
Operation
High
8,000
Normal
20,000
hrs.
Dynamic Contrast Adds to Depth and Realism
Digital f rame-by-frame s cene-link ing modulation ens ures precise laser li ght
output adjustment for 20,000:1*4 contra st even when bright and d ark scenes
frequently interchange, all while reducing power consumption.
Leads t he Class wi th 90 % Brightn ess Uniformi ty
SOLI D SHINE La ser delivers super ior screen brightn ess uniformity t hanks to
highly accurate white balance control. Brightness uniformity is greater than
90 % when me asured at the corne rs, edges, a nd center of the scree n.
4
Power Management Reduces Downtime
Auto power management compensates for voltage uctuations. Image display
is mainta ined at a reduc ed brightness even i f voltage drops bel ow specied
requirements, rather than shutting the projector off.
Efficient Cooling System Enhances Reliability
The light s ource’s liquid-coo ling system feature s a redesigned air inta ke and
solid alumi num radiato r to suppres s temperature rise s, allowing stable
operati on in temperatures up t o 45 °C (113 °F)*
5
and reduci ng noise to 49 dB.
Optio nal Long Li fe Filter for 2 0,000 -hour*6 Service-free Operation
Long Lif e Filter incl udes an electrost atic Micro Cut Fil ter
that colle cts minute dust par ticles with an ion e ffect. With
dust-resistant cabinet, this enables 20,000 hours*
project ion in Normal Mode w ith no maintenance.
6
of
Filter Replacement Period
Filter Typ eOperati onal Mode:
Supplied Filter
Long Lif e Filter
(Optional ET-EMFU330)
High
2,000 hours
4,000 hours
Opera tional Mo de:
Normal
4,000 hours
20,000 hours
*1 Refres h-rate varies dep ending on vertica l scanning frequen cy. *2 In High Mode. Fil ter
replaceme nt is required after 4 ,000 hours for opt ional Long Life Fi lter, and 2,000 hours
for supplie d lter. Measured in Dy namic Contrast M ode 3 with IEC6 2087: 2008
Broadca st Content and dus t density of 0.15 mg/m3. Perfor mance results may dif fer
depending o n environmental co nditions. *3 In N ormal Mode. Optio nal Long Life Filte r
required fo r continuous 20,0 00 hours operat ion. Filter replace ment required afte r 4,000
hours for su pplied lter/option al replacement lte r (ET-EMF3 30). Measured in D ynamic
Contra st Mode 3 with IEC 62087: 2008 Br oadcast Conten t and dust density o f 0.15
mg/m3. Perfor mance results may dif fer depending on en vironmental cond itions. *4 With
Dynamic C ontrast Mode se t to 3. *5 Light outpu t may be reduced to prote ct certain
projectors depending on environmental conditions. Please refer specication pages for
individua l projector model s for details on opera ting temperature s in various conditi ons.
*6 In Norm al Mode. 4,000 hou rs for High Mode. Wh en using supplied lt er, 4,000 hours
for Norma l Mode and 2,000 ho urs for High Mode. U sage environment may a ffect lter
replacement cycle.
Contrast Sync Function for
Multi-screen Configurations
Contrast Sync function for multi-screen
applications allows the dynamic contrast control
to be synchronized for consistent picture quality
across screens, while Shutter Sync synchronizes
shutter on/off timing.
Contrast Sync
Projector AProjector BProjector A
Average: 5 %Average: 15 %Average: 10 %
Image luminance of all projectors is averaged for unified Dynamic Contrast, rather than each
unit setting Dynamic Contrast separately. Step noise is eliminated in edge-blended areas.
If shutter functions are not linked, shutter ON/OFF timing varies. When shutter
functions of slave projectors are linked to a master, shutter ON/OFF timing is uniform*.
* Includes fade-in and fade-out effects. Projector shutter functions can be set to operate
individually if desired.
Projector B
Single-Cable DIGITAL LINK Video
and Control Connection
DIGITAL LINK transmits uncompressed Full HD
video and control commands through a single CAT
5e or higher STP cable for distances of up to 150 m
(492 ft)*1. Optional DIGITAL LINK Switcher or
Digital Interface Box further simplies installation,
reduces cabling and associated
costs, and enhances reliability.
DIGITAL LINK 1
ET-YFB200G
PCBlu-ray
CAT5e (STP) cable or higher
(Up to 150 m/492 ft*
DIGITAL LINK 2
Disc player
Document
camera
1
)
VCRPC
Backup Input Setting Assures
Reliability
Projectors smoothly switch to a backup input
signal should the primary input signal be
disrupted*2, enhancing reliability in mission
critical control rooms and in applications such as
projection mapping displays and staging events
where image display must be maintained.
Conventional System
Multiple-unit widescreen projection
Partially blank!
Source
If the main input signal is disrupted,
image display is cut off
Backup Input Setting
Multiple-unit widescreen projection
Switch quickly
Secondary source
If primary signal is disrupted, back-up
signal smoothly engages to maintain
image display
Primary source
Multi-screen Support System
Seamlessly Connects Multiple Screens
• Edge Blending: Edges of adjacent screens can
be blended and their luminance controlled
• Color Matching: Corrects color reproduction
variations of each projector via PC control software
• Digital Image Enlarging: Digital zoom up to
3
10X (H / V )*
edge-blended to create large multi-screen images
. Up to 100 units (10 x 10) can be
Color matching
Projector
Edge blending
Source
With edge blending
Without edge blending
Overlapping
image edges
Multi-Unit Brightness and Color Control
Sensor s detect color and br ightness appare nt on screen. Projec tors
automati cally calibrate fo r a uniform multi-scr een image, adding a layer o f
convenience and cost saving for long-term events.
Built-in G eo Adjustmen t for Unique Scr een Surfaces
Geo Adju stment adapts imag es for proje ction onto special ly shaped screens
with ne -tuning via remote con trol. Enhanced wi th Multi-Scree n Support
System , Geo Adjus tment makes creati ve mapping present ations easy.
Geome try Manager Pr o Software a nd Upgrad e Kits
Geo software expands image adjustment and simplies multi-screen setup. The
free sof tware perfor ms color matching, edge blending, and other functions via
networ k. Optional upg rades and plug-ins f urther streaml ine and automate set up.
Common L enses Cut Your Inv entory Cost s
The PT-R Z31K Series share o ptional len ses with Panason ic’s 3-Chip D LP™
project or range, potential ly reducing inventor y for rental/st aging profession als,
while also supporting the ET-D75LE95 Ultra-Short Throw Lens.
Terminals f or Every Appl icatio n
Connec t any source device to t he PT-RZ31K Seri es via its ar ray of terminals
including 3 G-SDI, DI GITAL L INK, DVI- D, and HDMI.
Active 3D Projection Capability
The PT-R Z31K Series is comp atible with active 3 D projection tec hnology. It
supports an external transmitter and active-shutter glasses, or an active lter
and passive glasses*
4
for viewin g 3D images.
Suppor ts Art-Net DM X, Crestron C onnected™, an d PJLink™
The PT-R Z31K Series suppo rts Art-N et DMX pro tocol for lighting m anagement.
This enab les connection wi th lighting consol es for added functi onality and
control o ptions. Crestro n Connected™ and PJ Link™ (Clas s 1) also stre amline
integration into existing AV infrastructure.
*1 150 m (492 f t) transmissio n available only with E T-YFB200G D IGITAL LI NK Switcher fo r
signals up to 10 80p. *2 Combin ation of primary /secondary inp ut terminals is xe d. Supported
combinati ons are DVI-D ( primary) and H DMI (seconda ry) terminals, o r SDI 1 (primar y) and
SDI 2 (sec ondary) termi nals. The Backup I nput Setting is e nabled only when th e input signal
to the prima ry and secondar y terminals is the sa me. *3 While the inpu t resolution will no t
change, main taining image qual ity is not possib le for images enlarg ed horizontall y and verticall y
via the digit al zoom functio n. *4 Please contac t your sales repres entative for fur ther informat ion.
5
Page 6
Eyebolt-ready for Easy Installation
Eyebolts allow the PT-R Z31K Series to hang from a crane,
simplifying rigging at large-scale events for rental/staging
professionals.
6. MULTI PROJECTOR SYNC IN/
3D SYNC 1 IN/OUT terminal
7. MULTI PROJECTOR SYNC OUT/
16
3D SYNC 2 OUT terminal
ET-D75LE95
(C)
(D)
min. max.
-0.39
(-1.3)
-0.16
(-0.5)
0.23
(0.8)
0.61
(2.0)
1.00
(3.3)
1.38
(4.5)
1.77
(5.8)
2.54
(8.3)
3.31
(10.9)
0.17
(0.6)
0.24
(0.8)
0.37
(1.2)
0.49
(1.6)
0.62
(2.0)
0.74
(2.4)
0.86
(2.8)
1.11
(3.6)
1.36
(4.5)
0.33
(1.1)
0.44
(1.5)
0.63
(2.1)
0.82
(2.7)
1.02
(3.3)
1.21
(4.0)
1.40
(4.6)
1.78
(5.8)
2.16
(7.1)
0.68
(2.2)
0.91
(3.0)
1.30
(4.3)
1.68
(5.5)
2.07
(6.8)
2.45
(8.0)
2.84
(9.3)
3.61
(11.8)
4.38
(14.4)
8. DC 1 OUT terminal
9. DC 2 OUT terminal
10. SDI 1 IN terminal
11. SDI 2 IN terminal
12. RGB 1 IN terminal
13. RGB 2 IN terminal
14. DVI-D IN terminal
15. HDMI IN terminal
16. DIGITAL LINK/LAN terminal
min. max.
0.59
(1.9)
0.66
(2.2)
0.79
(2.6)
0.91
(3.0)
1.03
(3.4)
1.16
(3.8)
1.28
(4.2)
1.53
(5.0)
1.78
(5.8)
Power terminal
on body
AC IN terminal
2P/3W 30 A 250 V
PT-RS30K (4:3 aspect ratio)
(F)
0.75
(2.5)
0.86
(2.8)
1.05
(3.4)
1.24
(4.1)
1.43
(4.7)
1.62
(5.3)
1.81
(5.9)
2.20
(7.2)
2.58
(8.5)
NEMA L6-30
2P/3W 30 A 250 V
Clock position 6h
(A)
0.96
(3.1)
1.20
(3.9)
1.59
(5.2)
1.99
(6.5)
2.38
(7.8)
2.77
(9.1)
3.17
(10.4)
3.95
(13.0)
4.74
(15.6)
(B)
0.99
(3.2)
1.23
(4.0)
1.62
(5.3)
2.01
(6.6)
2.41
(7.9)
2.80
(9.2)
3.19
(10.5)
3.98
(13.1)
4.77
(15.6)
(C)
0.70
(2.3)
0.94
(3.1)
1.33
(4.4)
1.72
(5.6)
2.12
(7.0)
2.51
(8.2)
2.90
(9.5)
3.69
(12.1)
4.48
(14.7)(11.2)
2P/3W 15 A
125 V
ET-D75LE95
(D)
-0.37
(-1.21)
-0.13
(-0.4)
0.26
(0.9)
0.65
(2.1)
1.05
(3.4)
1.44
(4.7)
1.83
(6.0)
2.62
(8.6)
3.41
(E)
min. max.
0.18
0.25
(0.6)
(0.8)
0.25
0.34
(0.8)
(1.1)
0.38
0.50
(1.2)
(1.6)
0.50
0.66
(1.6)
(2.2)
0.63
0.81
(2.1)
(2.7)
0.76
0.97
(2.5)
(3.2)
0.88
1.13
(2.9)
(3.7)
1.14
1.44
(3.7)
(4.7)
1.39
1.76
(4.6)
(5.8)
Dimensions
418 (16-15/32)
Unit: meters (feet)
min. max.
0.59
(1.9)
0.67
(2.2)
0.80
(2.6)
0.92
(3.0)
1.05
(3.4)
1.18
(3.9)
1.30
(4.3)
1.56
(5.1)
1.81
(5.9)
700
(27-25/32)
(F)
0.67
(2.2)
0.76
(2.5)
(3.0)
(3.5)
1.23
(4.0)
1.39
(4.6)
1.55
(5.1)
1.86
(6.1)
2.17
(7.1)
6
Page 7
Specifications
Model
Power supplyAC 200–240 V, 50/60 Hz; AC 100–200 V, 50/60 Hz (brightness is restricted with lower voltage)
Power consumption
DLP™ chip24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)
Panel size
Display method
Pixels6,912,000 (1920 x 1200 x 3) pixels
Refresh rate120 Hz*
Lens
Light source
Filter
Screen size (diagonal)
Brightness
Center-to-corner uniformity*
5
Contrast*
Resolution1920 x 1200 pixels
Scanning
frequency
Optical
9
axis shift*
Keystone correction range
Keystone correction range with optional Upgrade Kit ET-UK20
Installation
Terminals
Cabinet materialsMetal, molded plastic
Dimensions (W × H × D) 700 mm x 418 mm*10 x 1,250 mm (27 25/32˝ x 16 15/32˝ x 49 7/32˝ ) (including protruding parts); 700 mm x 373 mm*11 x 1,250 mm (27 9/16˝ x 14 11/16˝ x 49 7/32˝ ) (not including protruding parts)
Shipping dimensions (W x H x D)PT-RZ31K/KUY: 914 mm x 625 mm x 1,488 mm (35 31/32˝ x 24 19/32˝ x 58 19/32˝ ); PT-RZ31KE: 914 mm x 625 mm x 1,488 mm (35 31/32˝ x 24 19/32˝ x 58 19/32˝)
Weight*12 Approx. 79 kg (174 lbs.)
Shipping weightPT-RZ31K/KUY: 100.7 kg (222.0 lbs.), PT-RZ31KE: 97.5 kg (214.9 lbs.)
Operation noise*
Operating environment
Supplied accessories
*1 When Standby Mode is set to ECO, network functions such as power on over LAN will not operate. Additionally, only certain commands can be received for external control using the serial terminal. *2 Refresh-rate varies depending on vertical scanning frequency. *3 Brightness will have
decreased to approximately 70 % of its original level after 8,000 hours operation. *4 With lens other than ET-D75LE95 and power supply of AC 200 V. *5 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is
average of all products when shipped. *6 Measured at center area of projector screen. Measurement method is in compliance with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *7 Only compatible with dot-clock frequency of 27 MHz (pixel
repetition signal). *8 WUXGA resolution is supported when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking). *9 Optical axis shift is not supported on the ET-D75LE50. *10 With legs at shortest position. *11 Excluding legs. *12 Average value. May
differ depending on the actual unit. *13 If ambient temperature exceeds 35 °C (95 °F) when used in locations from 0 m to 2,700 m (0 ft to 8,858 ft) above sea level, or if it exceeds 25 °C (77 °F) when used in locations from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level, light
output may be reduced to protect the projector.
5
SD-SDI
HD-SDI
Dual-link HD-SDI
3G-SDI
Dual-link 3G-SDI
HDMI/DVI-D/DIGITAL LINK
RGB
YPBPR (YCBCR)
Video/YC
Vertical
(from center of screen)
Horizontal
(from center of screen)
SDI 1 IN
SDI 2 IN
HDMI INHDMI 19-pin × 1 (Deep Color, compatible with HDCP)
DVI-D IN
RGB 1 IN
RGB 2 IN
MULTI PROJECTOR SYNC IN/3D SYNC 1 IN/OUT
MULTI PROJECTOR SYNC OUT/3D SYNC 2 OUT
SERIAL IN
SERIAL OUTD-sub 9-pin (male) × 1 for link control
REMOTE 1 IN
REMOTE 1 OUT
REMOTE 2 IN
LAN/DIGITAL LINK
DC OUT
5
PT-RZ31KPT-RS30K
1
2,870 W (0.3 W with Standby Mode set to Eco*
Average Power Consumption: 2,310 W (High Mode), 1,890 W (Normal Mode), 1,040–1,680 W (Long Life 1 Mode), 924–1,580 W (Long Life 2 Mode), 794–1,460 W (Long Life 3 Mode)
[Operating temperature: 25 °C (77 °F), altitude: 700 m (2,297 ft), IEC627087: 2008 Broadcast content, Image Mode: Standard, Dynamic Contrast Mode: 2]
SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480/60i, 576/50i
SMPTE ST 292 compliant, [YP
SMPTE ST 372 compliant, [RGB 4:4:4 12-bit/10-bit] 1080/60i, 1080/50i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, 2048 x 1080/24p, [X’Y’Z’ 4:4:4 12-bit] 2048 x 1080/24p, 2048 x 1080/25p
SMPTE ST 424 compliant, [RGB 4:4:4 12-bit/10-bit] 1080/60i, 1080/50i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, 2048 x 1080/24p, 2048 x 1080/25p, 2048 x 1080/30p,
[YPB
PR 4:2:2 10-bit] 1080/60p, 1080/50p, 2048 x 1080/48p, 2048 x 1080/50p, 2048 x 1080/60p, [X'Y'Z' 4:4:4 12-bit] 2048 x 1080/24p, 2048 x 1080/25p, 2048 x 1080/30p
SMPTE ST 425 compliant, [YPBPR 4:4:4 12-bit/10-bit] 1080/60p, 1080/50p, 2048 x 1080/60p, 2048 x 1080/50p, 2048 x 1080/48p,
[RGB 4:4:4 12-bit/10-bit] 1080/60p, 1080/50p, 2048 x 1080/60p, 2048 x 1080/50p, 2048 x 1080/48p
480/60i*7, 576/50i*7, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, 640 x 400–WUXGA*8 (1920 x 1200)
(compatible with non-interlaced signals only), dot clock: 25–162 MHz
±55 % (±44 % with ET-D75LE6, +68 % – +78 % with ET-D75LE95) (powered)
±20 % (±15 % with ET-D75LE6, ±12 % with ET-D75LE95) (powered)
Vertical: ±40 ° (± 22 ° with ET-D75LE50, ±28 ° with ET-D75LE6), Horizontal: ±15 °
Vertical: ±45 ° (± 40 ° with ET-D75LE10/20, ±22 ° with ET-D75LE50, ±28 ° with ET-D75LE6), Horizontal: ±40 ° (±15 ° with ET-D75LE50/6), Up to a total of ±55 ° during simultaneous horizontal and vertical correction
DVI-D 24-pin × 1 (single link, DVI 1.0 compliant, compatible with HDCP)
RGB × 1 (BNC × 5): RGB/YPBPR/YCBCR/YC/VIDEO
D-sub HD 15-pin (female) × 1: RGB/YPBPR/YCBCR
BNC × 1
BNC × 1
D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
M3 × 1 for wired remote control
M3 × 1 for link control
D-sub 9-pin (female) × 1 for external control (parallel)
RJ-45 × 1 for network, DIGITAL LINK connection, 100Base-TX, compatible with Art-Net, PJLink™ (Class 1), Deep Color, HDCP
USB Type A x 2 for power supply (DC 5 V, max 900 mA)
49 dB
Operating temperature: 0–50 °C (32–122 °F)*
Long Life1/2/3 Mode]; 0–40 °C (32–104 °F) [altitude: up to 1,400 m (4,593 ft) with Smoke Cut Filter]; Operating humidity: 10–80 % (no condensation)
Power cord x 2, wireless/wired remote control unit, batteries (R6/AA type x 2), lens drop-prevention screw, replacement filter units x 4 (ET-EMF330), lens hole cover, software CD-ROM (Logo Transfer Software,
Multi Monitoring & Control Software)