Panasonic PT-RZ12K, PT-RS11K User Manual

Operating Instructions

Functional Manual

DLP™ Projector

Model No.

PT-RZ12K

 PT-RS11K

The projection lens is sold separately.

Commercial Use

Thank you for purchasing this Panasonic product.

■ This manual is common to all the models regardless of sufxes of the Model No.

zfor India

PT- RZ12KD / PT-RS11KD

zfor other countries or regions

PT- RZ12K

■ Before operating this product, please read the instructions carefully and save this manual for future use.

■ Before using this product, be sure to read “Read this rst!” (x pages 5 to 14).

PT-RS11K

ENGLISH

TQBJ0904

Contents

Read this rst! 5

Chapter 1 Preparation

Precautions for use 18

Cautions when transporting Cautions when installing Security

DIGITAL LINK Art-Net

Early Warning Software Disposal Cautions on use Accessories Optional accessories

About your projector

Remote control Projector body

Preparing the remote control

Inserting and removing the batteries When using the multiple projectors Connecting the remote control to the projector

with a cable

18 18 21 21 22 22 22 22 24 25

26 28

31 31

Projecting 64

Selecting the input signal

How to adjust focus, zoom, and shift Adjusting the lens position and focus when the

Fixed-focus Lens (Model No.: ET-D75LE90)

is used

Setting the lens position

Adjustment range by the lens position shift

(optical shift)

Adjusting the lens mounter when the focus is

unbalanced

Operating with the remote control

Switching the input Using the shutter function Using the on-screen display function Using the automatic setup function Switching the image aspect ratio Using the function button Displaying internal test pattern Using the status function Using the AC voltage monitor function Setting ID number of the remote control

Chapter 4 Settings

72 72 72

74 74

Chapter 2 Getting Started

Setting up 34

Installation mode Parts for ceiling mount (optional) Projected image and throw distance Adjusting adjustable feet

Attaching/removing the projection lens

(optional)

Attaching the projection lens Removing the projection lens

Connecting

Before connecting

Connecting example: AV equipment Connecting example: Computers Connecting example using DIGITAL LINK

34 35 35 45

46 47

48 49 50 51

Chapter 3 Basic Operations

Switching on/off the projector 54

Connecting the power cord Power indicator Switching on the projector When the initial setting screen is displayed Making adjustments and selections Switching off the projector

54 54 55 56 62 63

Menu navigation 76

Navigating through the menu Main menu

Sub-menu

[PICTURE] menu

[PICTURE MODE] [CONTRAST] [BRIGHTNESS] [COLOR] [TINT] [COLOR TEMPERATURE] [GAMMA] [SYSTEM DAYLIGHT VIEW] [SHARPNESS] [NOISE REDUCTION] [DYNAMIC CONTRAST] [SYSTEM SELECTOR] sRGB-compliant video

[POSITION] menu

[SHIFT] [ASPECT] [ZOOM] [CLOCK PHASE] [GEOMETRY]

2 - ENGLISH

Contents

[ADVANCED MENU] menu

[DIGITAL CINEMA REALITY] [BLANKING] [INPUT RESOLUTION] [CLAMP POSITION] [EDGE BLENDING] [FRAME RESPONSE] [FRAME CREATION] [FRAME LOCK] [RASTER POSITION]

[DISPLAY LANGUAGE] menu

Changing the display language

[3D SETTINGS] menu

[3D SYSTEM SETTING] [3D SYNC SETTING] [3D INPUT FORMAT] [LEFT/RIGHT SWAP] [3D COLOR MATCHING] [3D PICTURE BALANCE] [DARK TIME SETTING] [3D FRAME DELAY] [3D TEST MODE] [3D TEST PATTERN] [SAFETY PRECAUTIONS MESSAGE] [3D SAFETY PRECAUTIONS]

[DISPLAY OPTION] menu

[COLOR MATCHING] [LARGE SCREEN CORRECTION] [SCREEN SETTING] [AUTO SIGNAL] [AUTO SETUP] [BACKUP INPUT SETTING] [SIMUL INPUT SETTING] [RGB IN] [DVI-D IN] [HDMI IN] [DIGITAL LINK IN] [SDI IN] [ON-SCREEN DISPLAY] [IMAGE ROTATION] [BACK COLOR] [STARTUP LOGO] [UNIFORMITY] [SHUTTER SETTING] [FREEZE] [WAVEFORM MONITOR] [CUT OFF]

95 95 96 96 97 98 99 99

100

101

102

102 102 103 103 103 104 104 105 105 105 106 106

107

107 108 108 109 109

110

111 112 113 114 115 117 118

120 120 120 121 121 123 123 124

[PROJECTOR SETUP] menu

[PROJECTOR ID] [PROJECTION METHOD] [OPERATION SETTING] [LIGHT OUTPUT] [BRIGHTNESS CONTROL] [STANDBY MODE] [NO SIGNAL SHUT-OFF] [NO SIGNAL LIGHTS-OUT] [INITIAL STARTUP] [STARTUP INPUT SELECT] [DATE AND TIME] [SCHEDULE] [RS-232C] [REMOTE2 MODE] [FUNCTION BUTTON] [LENS CALIBRATION] [LENS MEMORY] [STATUS] [AC VOLTAGE MONITOR] [SAVE ALL USER DATA] [LOAD ALL USER DATA] [INITIALIZE] [SERVICE PASSWORD]

[P IN P] menu

Using P IN P function

[TEST PATTERN] menu

[TEST PATTERN]

[SIGNAL LIST] menu

Registering new signals Renaming the registered signal Deleting the registered signal Protecting the registered signal Expanding signal lock-in range Sub memory

[SECURITY] menu

[SECURITY PASSWORD] [SECURITY PASSWORD CHANGE] [DISPLAY SETTING] [TEXT CHANGE] [CONTROL DEVICE SETUP] [CONTROL DEVICE PASSWORD CHANGE]

154

136

138

142

144

146

151

125

129

130

134

135

140

140 140

141

143

144

145

146

148

149

149 149 150 150

152

153

ENGLISH - 3

Contents

[NETWORK] menu 156

[DIGITAL LINK MODE] [DIGITAL LINK SETUP] [DIGITAL LINK STATUS] [NETWORK SETUP] [NETWORK CONTROL] [NETWORK STATUS] [DIGITAL LINK MENU] [Art-Net SETUP] [Art-Net CHANNEL SETTING] [Art-Net STATUS] Network connection

Connecting to a twisted-pair-cable transmitter

Accessing from the web browser

156 156 157 157 158 158 159 159 159 160 160

161 162

Chapter 5 Maintenance

Light source/temperature/lter indicators 182

When an indicator lights up

Maintenance/replacement

Before performing maintenance/replacement Maintenance Replacing the unit

Troubleshooting

Self-diagnosis display

182

184

184 184 186

187

189

Chapter 6 Appendix

Technical information 192

PJLink protocol Using Art-Net function Control commands via LAN <SERIAL IN>/<SERIAL OUT> terminal <REMOTE 2 IN> terminal

Two-window display combination list Control device password Upgrade Kit List of compatible signals

Specications

Dimensions

Precautions for attaching the Ceiling Mount

Bracket

Index

192 193 196 199 203 204 205 205 206

212

215

216

217

4 - ENGLISH

Read this rst!

WARNING: THIS APPARATUS MUST BE EARTHED.

WARNING: To prevent damage which may result in re or shock hazard, do not expose this appliance to rain

or moisture.

This device is not intended for use in the direct eld of view at visual display workplaces. To avoid incommoding reexions at visual display workplaces this device must not be placed in the direct eld of view. The equipment is not intended for used at a video workstation in compliance BildscharbV.

The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.

WARNING:

1. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.

2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualied

service personnel.

3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing-

type mains plug. This plug will only t an earthing-type mains socket. This is a safety feature. If you are

unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the earthing plug.

WARNING:

This equipment is compliant with Class A of CISPR32. In a residential environment this equipment may cause radio interference.

CAUTION: To assure continued compliance, follow the attached installation instructions. This includes using

the provided power cord and shielded interface cables when connecting to computer or peripheral

devices. Also, any unauthorized changes or modications to this equipment could void the user’s

authority to operate this device.

This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a domestic environment.

Directive 2009/125/EC

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

WARNING: RISK OF ELECTRIC SHOCK. DON’T OPEN

Indicated on the projector

The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the

product.

ENGLISH - 5

Read this rst!

Notice on laser

(for USA and Canada)

This projector is the Class 3R laser product that complies with IEC 60825-1:2007.

TQFX340

DANGER-

CLASS 4 LASER RADIATION WHEN OPEN AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION DANGER-

RAYONNEMENT LASER DE CLASSE 4 - EN CAS D'OUVERTURE EXPOSITION DANGEREUSE AU RAYONNEMENT DIRECT OU DIFFUS DES YEUX OU DE LA PEAU

TQFX609

TQFX608

For North America “Complies with 21 CFR Parts 1040.10 and 140.11 except for deviations pursuant to Laser Notice No.50 dated june 24.2007”

IEC 60825-1:2007 LASER RADIATION AVOID DIRECT EYE EXPOSURE CLASS 3R LASER PRODUCT

WAVE LENGTH:448-462nm MAXIMUM OUTPUT:333mW

IEC 60825-1:2007 RAYONNEMENT LASER EXPOSITION DIRECTE DANGEREUSE POUR LES YEUX APPAREIL À LASER DE CLASSE 3R

LONGUEURS D'ONDES:448-462nm MAXIMALE DU RAYONNEMENT:248mW DURÉE DE L'IMPULSION:1.1ms

(Inside of product)

(for India)

This projector is the Class 1 laser product that complies with IEC/EN 60825-1:2014.

TQFX340

(for other countries or regions)

This projector is the Class 1 laser product that complies with IEC/EN 60825-1:2014.

TQFX340

6 - ENGLISH

Read this rst!

CAUTION (North/Middle/South America/Taiwan)

Power Supply: This Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only.

CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for

power supplies up to 125 V. If you need to use higher voltages than this, you will need to obtain a separate 250 V power cord. If you use the accessory cord in such situations, re may result.

CAUTION (North/Middle/South America/Taiwan)

This equipment is equipped with a three-pin grounding-type power plug. Do not remove the grounding pin on the power plug. This plug will only t a grounding-type

power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the grounding plug.

Do not remove

WARNING (USA and Canada)

fNot for use in a computer room as dened in the Standard for the Protection of Electronic Computer/Data

Processing Equipment, ANSI/NFPA 75.

fFor permanently connected equipment, a readily accessible disconnect device shall be incorporated in the

building installation wiring.

fFor pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily

accessible.

NOTIFICATION (Canada)

This class A digital apparatus complies with Canadian ICES-003.

For USA-California Only

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling

may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

ENGLISH - 7

Read this rst!

FCC NOTICE (USA)

Verication

Model Number: PT-RZ12K / PT-RS11K Trade Name: Panasonic Responsible Party: Panasonic Corporation of North America Address: Two Riverfront Plaza, Newark, NJ 07102-5490 General Contact: http://www.panasonic.com/support Projector Contact: http://panasonic.net/avc/projector/

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Caution:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Warning:

To assure continued compliance, follow the attached installation instructions. This includes using the provided

power cord and shielded interface cables when connecting to computer or peripheral devices. Also, any unauthorized changes or modications to this equipment could void the user’s authority to operate this device.

8 - ENGLISH

Read this rst!

IMPORTANT: THE MOLDED PLUG (U.K. only)

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This appliance is supplied with a molded three pin mains plug for your safety and convenience. A 13 amp fuse is tted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark If the plug contains a removable fuse cover, you must ensure that it is retted when the fuse is replaced. If you

lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from an Authorized Service Center.

If the tted molded plug is unsuitable for the mains socket in your home, then the fuse should be

removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.

If a new plug is to be tted, please observe the wiring code as shown below. If in any doubt, please consult a qualied electrician.

WARNING: THIS APPLIANCE MUST BE EARTHED.

IMPORTANT: The wires in this mains lead are colored in accordance with the following code:

As the colors of the wire in the mains lead of this appliance may not correspond with the colored markings

identifying the terminals in your plug, proceed as follows.

The wire which is colored GREEN - AND - YELLOW must be connected to the terminal in the plug

which is marked with the letter E or by the Earth symbol

YELLOW.

The wire which is colored BLUE must be connected to the terminal in the plug which is marked with the letter N or colored BLACK.

or the BSI mark on the body of the fuse.

Green - and - Yellow: Earth Blue: Neutral Brown: Live

or colored GREEN or GREEN - AND -

The wire which is colored BROWN must be connected to the terminal in the plug which is marked with the letter L or colored RED.

How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.

Importer’s name and address within the European Union

Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

ENGLISH - 9

Read this rst!

WARNING:

rPOWER

The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible

when problems occur. If the following problems occur, cut off the power supply immediately.

Continued use of the projector in these conditions will result in re or electric shock.

fIf foreign objects or water get inside the projector, cut off the power supply. fIf the projector is dropped or the cabinet is broken, cut off the power supply. fIf you notice smoke, strange smells or noise coming from the projector, cut off the power supply.

Please contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.

During a thunderstorm, do not touch the projector or the cable.

Electric shocks can result.

Do not do anything that might damage the power cord or the power plug.

If the power cord is used while damaged, electric shocks, short-circuits or re will result.

fDo not damage the power cord, make any modications to it, place it near any hot objects, bend it

excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.

Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.

Do not use anything other than the provided power cord.

Failure to observe this will result in electric shocks or re. Please note that if you do not use the provided power

cord to ground the device on the side of the outlet, this may result in electric shocks.

Completely insert the power plug into the wall outlet and the power connector into the projector terminal.

If the plug is not inserted correctly, electric shocks or overheating will result.

fDo not use plugs which are damaged or wall outlets which are coming loose from the wall.

Do not handle the power plug and power connector with wet hands.

Failure to observe this will result in electric shocks.

Do not overload the wall outlet.

If the power supply is overloaded (ex., by using too many adapters), overheating may occur and re will result.

Clean the power plug regularly to prevent it from becoming covered in dust.

Failure to observe this will cause a re.

fIf dust builds up on the power plug, the resulting humidity can damage the insulation. fIf not using the projector for an extended period of time, pull the power plug out from the wall outlet.

Pull the power plug out from the wall outlet and wipe it with a dry cloth regularly.

rON USE/INSTALLATION

Do not place the projector on soft materials such as carpets or sponge mats.

Doing so will cause the projector to overheat, which can cause burns, re or damage to the projector.

Do not set up the projector in humid or dusty places or in places where the projector may come into contact with oily smoke or steam.

Using the projector under such conditions will result in re, electric shocks or deterioration of components. Deterioration of components (such as ceiling mount brackets) may cause the projector which is mounted on the

ceiling to fall down.

Do not install this projector in a place which is not strong enough to take the full weight of the projector or on top of a surface which is sloped or unstable.

Failure to observe this will cause projector to fall down or tip over the projector, and severe injury or damage could result.

Do not cover the air intake/exhaust ports or place anything within 500 mm (19-11/16") of them.

Doing so will cause the projector to overheat, which can cause re or damage to the projector.

fDo not place the projector in narrow, badly ventilated places. fDo not place the projector on cloth or papers, as these materials could be drawn into the air intake port.

10 - ENGLISH

Read this rst!

WARNING:

Do not look at or place your skin into the light emitted from the lens while the projector is being used.

Doing so can cause burns or loss of sight.

fStrong light is emitted from the projector’s lens. Do not look at or place your hands directly into this light. fBe especially careful not to let young children look into the lens. In addition, turn off the power and switch

off the main power when you are away from the projector.

Do not project an image with the lens cover of the projection lens (optional) attached.

Doing so can cause re.

Never attempt to remodel or disassemble the projector.

High voltages can cause re or electric shocks.

fFor any inspection, adjustment and repair work, please contact an Authorized Service Center.

Doing so may cause exposure to dangerous laser radiation.

fThe laser module is built in this projector. Follow procedures specied in the Operating Instructions to make

operations and adjustments.

Do not allow metal objects, ammable objects, or liquids to enter inside of the projector. Do not allow

the projector to get wet.

Doing so may cause short circuits or overheating, and result in re, electric shock, or malfunction of the

projector.

fDo not place containers of liquid or metal objects near the projector. fIf liquid enters inside of the projector, consult your dealer. fParticular attention must be paid to children.

Use the ceiling mount bracket specied by Panasonic.

Using the ceiling mount bracket other than the specied one will result in falling accidents.

fAttach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down.

Installation work (such as ceiling mount bracket) should only be carried out by a qualied technician.

If installation is not carried out and secured correctly, it can cause injury or accidents, such as electric shocks.

fBe sure to use the wire provided with the ceiling mount bracket as an extra safety measure to prevent the

projector from falling down. (Install in a different location to the ceiling mount bracket.)

rACCESSORIES

Do not use or handle the batteries improperly, and refer to the following.

Failure to observe this will cause burns, batteries to leak, overheat, explode or catch re.

fDo not use unspecied batteries. fDo not charge dry cell batteries. fDo not disassemble dry cell batteries. fDo not heat the batteries or place them into water or re. fDo not allow the + and – terminals of the batteries to come into contact with metallic objects such as

necklaces or hairpins. fDo not store or carry batteries together with metallic objects. fStore the batteries in a plastic bag and keep them away from metallic objects. fMake sure the polarities (+ and –) are correct when inserting the batteries. fDo not use a new battery together with an old battery or mix different types of batteries. fDo not use batteries with the outer cover peeling away or removed.

If the battery uid leaks, do not touch it with bare hands, and take the following measures if necessary.

fBattery uid on your skin or clothing could result in skin inammation or injury.

Rinse with clean water and seek medical advice immediately. fBattery uid coming in contact with your eyes could result in loss of sight.

In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.

Do not allow children to reach the lens xing screw.

Accidentally swallowing them can cause physical harm.

fIf swallowed, seek medical advice immediately.

Remove the depleted batteries from the remote control promptly.

fLeaving them in the unit may result in uid leakage, overheating, or explosion of the batteries.

ENGLISH - 11

Read this rst!

CAUTION:

rPOWER

When disconnecting the power cord, be sure to hold the power plug and power connector.

If the power cord itself is pulled, the lead will become damaged, and re, short-circuits or serious electric shocks

will result.

When not using the projector for an extended period of time, disconnect the power plug from the wall

outlet.

Failure to do so may result in re or electric shock.

Before replacing the projection lens, be sure to turn off the power and disconnect the power plug from

the wall outlet.

fUnexpected projection of light may cause injury to eyes. fReplacing the projection lens without removing the power plug may result in electric shock.

Disconnect the power plug from the wall outlet before carrying out any cleaning and replacing the unit.

Failure to do so may result in electric shock.

rON USE/INSTALLATION

Do not place heavy objects on top of the projector.

Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage or injury. The projector will be damaged or deformed.

Do not put your weight on this projector.

You could fall or the projector could break, and injury will result.

fBe especially careful not to let young children stand or sit on the projector.

Do not place the projector in extremely hot locations.

Doing so will cause the outer casing or internal components to deteriorate, or result in re.

fTake particular care in locations exposed to direct sunlight or near heaters.

Do not install the projector in a location where salt pollution or corrosive gas may occur.

Doing so may result in falling due to corrosion. Also, it may result in malfunctions.

Do not place your hands or other objects close to the air exhaust port.

Doing so will cause burns or damage your hands or other objects.

fHeated air comes out of the air exhaust port. Do not place your hands or face, or objects which cannot

withstand heat close to this port.

Do not place your hands in the openings beside the optical lens, while shifting the lens.

Failure to observe this could cause injury.

Do not stand in front of the lens while the projector is being used.

Doing so can cause damage and burns to clothing.

fStrong light is emitted from the projector’s lens.

Do not place objects in front of the lens while the projector is being used.

Doing so can cause re, damage to an object, or malfunction of the projector.

fStrong light is emitted from the projector’s lens.

The projector must be carried or installed by two or more people.

Failure to do so may cause falling accidents.

Always disconnect all cables before moving the projector.

Moving the projector with cables still attached can damage the cables, which will cause re or electric shocks to

occur.

When mounting the projector on the ceiling, keep mounting screws and power cord from contact with

metal parts inside the ceiling.

Contact with metal parts inside the ceiling can cause electric shocks.

12 - ENGLISH

Read this rst!

CAUTION:

rACCESSORIES

When not using the projector for an extended period of time, remove the batteries from the remote

control.

Failure to observe this will cause the batteries to leak, overheat, catch re or explode, which may result in re

or contamination of surrounding area.

rMAINTENANCE

Do not attach the air lter unit while it is wet.

Doing so may result in electric shock or malfunctions.

fAfter you clean the air lter units, dry them thoroughly before reattaching them.

Ask your dealer about cleaning inside the projector every 20 000 hours of usage as an estimated duration.

Continuous use while dust is accumulated inside the projector may result in re.

fFor cleaning fee, ask your dealer.

rVIEWING 3D VIDEO

Those with a medical history of oversensitivity to light, heart problems, or poor physical health should

not view 3D images.

This may lead to a worsening of medical conditions.

If you feel tiredness or discomfort, or other abnormality while viewing with 3D Eyewear, discontinue

viewing.

Continuing use may cause health problems. Take a break as necessary.

When viewing 3D movies, aim to view one movie at a time and take a break as necessary.

When viewing 3D images, for example when playing 3D games or using a PC where two way interaction is possible, take an appropriate break every 30 to 60 minutes.

Watching for long periods of time may cause eye fatigue.

When preparing contents, use contents properly created to be used for 3D.

This may cause eye fatigue or health problems.

When viewing 3D images, pay attention to people and objects in the vicinity.

3D video may be mistaken for actual objects, and the related bodily movements can cause damage to objects and lead to injury.

Use 3D Eyewear when viewing 3D videos.

Do not tilt your head when viewing with 3D Eyewear.

Those who are near or far sighted, those with weaker eyesight in one eye, or those with astigmatism

should use corrective glasses etc. when using 3D Eyewear.

If the image appears distinctly double when viewing 3D video, discontinue viewing.

Watching for long periods of time may cause eye fatigue.

View at a distance of at least three times the effective height of the screen.

Viewing at distance closer than the recommended distance may cause eye fatigue. As with movies, if there are

black bands at the top and bottom of the video, view at a distance of 3 times or more of the height of the video section.

Children younger than 5 or 6 years old should not use 3D Eyewear.

As it is difcult to gauge the reactions of children to fatigue and discomfort their condition may worsen suddenly. If a child uses the 3D Eyewear, guardians should beware of the child’s eyes becoming tired.

ENGLISH - 13

To remove the battery

Remote Control Battery

Read this rst!

1. Press the guide and lift the cover.

(ii)

(i)

2. Remove the batteries.

Brazil Only

Brasil Apenas

rManuseio de baterias usadas

BRASIL

Após o uso, as pilhas e/ou baterias deverão

ser entregues ao estabelecimento comercial

ou rede de assistência técnica autorizada.

Cobrir os terminais positivo (+) e negativo (-) com uma ta isolante adesiva, antes de depositar numa caixa destinada para o recolhimento. O contato entre partes metálicas pode causar vazamentos, gerar calor, romper a blindagem e produzir fogo. (Fig. 1)

Fig. 1 Como isolar os terminais

Não desmonte, não remova o invólucro, nem amasse a bateria. O gás liberado pela bateria pode irritar a garganta, danicar o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos terminais. Não incinere nem aqueça as baterias, elas não podem car expostas a temperaturas superiores a 100 °C (212 °F). O gás liberado pela bateria pode irritar a garganta, danicar o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos

terminais provocado internamente.

Evite o contato com o liquido que vazar das baterias. Caso isto ocorra, lave bem a parte afetada com bastante água. Caso haja irritação, consulte um médico.

Fita Isolante

rRemoção das baterias

1. Pressione a guia e levante a tampa.

(ii)

2. Remova as baterias.

14 - ENGLISH

(i)

rTrademarks

f SOLID SHINE is a trademark of Panasonic Corporation. f Windows and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the United

States and other countries.

f Mac, Mac OS, and Safari are trademarks of Apple Inc., registered in the United States and other countries.

f PJLink

regions.

f HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other countries.

f RoomView and Crestron RoomView are registered trademarks of Crestron Electronics, Inc.

Crestron Connected

f HDBaseT f Art-Net f DisplayPort is a trademark or registered trademark of the Video Electronics Standards Association. f Adobe, Adobe Flash Player, and Adobe Reader are trademarks or registered trademarks of Adobe Systems Inc.

in the United States and/or other countries.

f RealD 3D is a trademark of RealD Inc. f Some of the fonts used in the on-screen menu are Ricoh bitmap fonts, which are manufactured and sold by

Ricoh Company, Ltd.

f All other names, company names, and product names mentioned in this manual are trademarks or registered

trademarks of their respective owners. Please note that the

is a registered trademark or pending trademark in Japan, the United States, and other countries and

and Fusion RV are trademarks of Crestron Electronics, Inc.

is a trademark of HDBaseT Alliance.

and TM symbols are not specied in this manual.

rIllustrations in this manual

f Illustrations of the projector, screen, and other parts may vary from the actual product. f Illustrations of the projector with the power cord attached are only examples. The shape of the supplied power

cords varies depending on the country where you purchased the product.

rReference pages

f Reference pages in this manual are indicated as (x page 00).

rTerm

f In this manual, the “Wireless/wired remote control unit” accessory is referred to as “Remote control”.

ENGLISH - 15

Features of the Projector

High luminance and high contrast

▶ With the high efcient optical system that

maximizes the output of the solid-state light source, and unique drive system, high

luminance of 12 000 lm and high contrast

of 20 000:1 are realized in addition to the

high color reproduction.

Easy and highly exible setup

▶ In addition to the DIGITAL LINK support,

Art-Net support, and abundant lineup

of the optional lens, application to wide range of usage is possible with support of

all 360° direction projection utilizing the

characteristics of solid-state light source.

Quick Steps

For details, refer to the corresponding pages.

1. Set up the projector.

(x page 34)

2. Attach the projection lens (optional).

(x page 46)

3. Connect with external devices. (x page 48)

4. Connect the power cord. (x page 54)

Long life and high reliability

▶ The maintenance cost for long-term

operation is reduced by the unique light

source cooling control technology and

improvement of the dust resistance. Also,

it will contribute to the stable operation by implementation of the backup function that will continue the projection by switching to the backup input signal immediately even when the input signal is discontinued, in addition to adopting solid-state light source which has long life.

5. Switch on the projector. (x page 55)

6. Make initial settings. (x page 56)

f Take this step when you switch on the

power for the rst time after purchasing the

projector.

7. Select the input signal. (x page 64)

8. Adjust the image. (x page 64)

16 - ENGLISH

Chapter 1 Preparation

This chapter describes things you need to know or check before using the projector.

ENGLISH - 17

Chapter 1 Preparation — Precautions for use

Precautions for use

Cautions when transporting

f Before using the projector, remove the dust sponge from the mounting portion of the projection lens and store it

for the future use. When transporting the projector, remove the projection lens before attaching the dust sponge. Otherwise dust will accumulate inside and may cause malfunctions.

f Transport the projector with 2 or more people. Failure to do so may drop the projector, which may result in

damage or deformation of the projector, or injury.

f When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. They

may damage the internal components and result in malfunctions.

f Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.

Cautions when installing

rDo not set up the projector outdoors.

The projector is designed for indoor use only.

rDo not set up the projector in the following locations.

f Places where vibration and impacts occur such as in a car or vehicle: Doing so may cause damage to internal

components or malfunction.

f Location close to sea or where corrosive gas may occur: The projector may fall due to corrosion. Also, failure to

do so may shorten the life of the components and result in malfunctions.

f Near the exhaust of an air conditioner: Depending on the conditions of use, the screen may uctuate in rare

cases due to the heated air from the air exhaust port or the hot or cooled air. Make sure that the exhaust from the projector or other equipment, or the air from the air conditioner does not blow toward the front of the

projector.

f Places with sharp temperature uctuations such as near lights (studio lamps): Doing so may shorten the life of

the light source, or result in deformation of the projector due to heat, which may cause malfunctions. Follow the operating environment temperature of the projector.

f Near high-voltage power lines or near motors: Doing so may interfere with the operation of the projector. f Places where there is high-power laser equipment: Directing a laser beam onto the projection lens surface

causes damage to the DLP chips.

rBe sure to ask a specialized technician or your dealer when installing the projector on

a ceiling.

The optional Ceiling Mount Bracket is required. Model No.: ET-PKD520H (for High Ceilings), ET-PKD520S (for Low Ceilings), ET-PKD520B (Projector Mount

Bracket)

rAsk a qualied technician or your dealer to install the cable wiring for DIGITAL LINK

connection.

Image and sound may be disrupted if cable transmission characteristics cannot be obtained due to inadequate

installation.

rThe projector may not work properly due to strong radio wave from the broadcast

station or the radio.

If there is any facility or equipment which outputs strong radio waves near the installation location, install the projector at a location sufciently far from the source of the radio waves. Or, wrap the LAN cable connected to the <DIGITAL LINK/LAN> terminal using a piece of metal foil or a metal pipe which is grounded at both ends.

rFocus adjustment

The high clarity projection lens is thermally affected by the light from the light source, making the focus unstable in the period just after switching on the power. It is recommended that images be projected continuously for at least 30 minutes before the focus is adjusted.

18 - ENGLISH

Chapter 1 Preparation — Precautions for use

rDo not install the projector at an altitude of 4 200 m (13 780') or higher above sea level.

rDo not use the projector in a location that the ambient temperature exceeds 50 °C

(122 °F).

Using the projector in a location that the altitude is too high or the ambient temperature is too high may reduce the life of the components or result in malfunctions.

The upper limit of the operating environment temperature differs depending on the altitude or the [OPERATING MODE] setting in the [PROJECTOR SETUP] menu → [OPERATION SETTING] (x page 125).

Setting for [OPERATING MODE]

Altitude above sea level

Altitude of 0 m (0') or higher

to lower than 1 400 m

(4 593') Altitude of 1 400 m (4 593')

or higher to lower than

2 700 m (8 858') Altitude of 2 700 m (8 858')

or higher to lower than

4 200 m (13 780')

[NORMAL], [USER1], [USER2], [USER3]

0 °C (32 °F) to 50 °C (122 °F)

0 °C (32 °F) to 45 °C (113 °F)

[ECO], [LONG LIFE1], [LONG LIFE2],

[LONG LIFE3]

0 °C (32 °F) to 45 °C (113 °F)

The projector cannot be used.

When the Smoke Cut Filter is used, the operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) regardless of the [OPERATING MODE] setting. It cannot be used at an altitude of 1 400 m (4 593')

or higher above sea level.

rProjection in all 360° direction is possible.

360°

360° vertically 360° horizontally 360° tilted

360°

(combination of vertical and horizontal)

360°

rCautions when setting up the projector

f Use the adjustable feet only for the oor standing installation and for adjusting the angle. Using them for other

purposes may damage the projector.

f The adjustable feet can be removed if not needed in the installation. However, do not use the screw holes

where the adjustable feet were removed to x the projector in place. Also, insert only the screws that are specied in the user manual of the optional accessories into the screw

holes of the adjustable feet. Failure to do so may cause damage to the projector.

ENGLISH - 19

Chapter 1 Preparation — Precautions for use

f When installing the projector in a method other than the oor installation using the adjustable feet, or the ceiling

installation, remove the adjustable feet (4 locations) and use the six screw holes for ceiling mount to x the projector to a mount (as shown in the gure).

(Screw diameter: M6, tapping depth inside the projector: 27 mm (1-1/16"), torque: 4 ± 0.5 N·m)

Adjustable feet

Mount

Screw holes for ceiling mount (M6)

Adjustable feet

Positions of screw holes for ceiling mount and

adjustable feet

f Do not stack three or more projectors. f Do not stack two projectors and use them simultaneously.

When stacking two projectors, use one of the either projector, and the other project as a backup. Also, take measure to prevent slipping off as a precaution. Use the optional Frame (Model No.: ET-PFD510) when stacking

two projectors and using them simultaneously.

f Do not use the projector supporting it by the top. f Do not block the ventilation ports (intake and exhaust) of the projector.

20 - ENGLISH

Chapter 1 Preparation — Precautions for use

f Prevent hot and cool air from the air conditioning system to blow directly to the ventilation ports (intake and

exhaust) of the projector.

500 mm (19-11/16") or longer 500 mm (19-11/16") or longer

500 mm (19-11/16") or longer

f Do not install the projector in a conned space.

When installing the projector in a conned space, provide air conditioning or ventilation separately. Exhaust heat

may accumulate when the ventilation is not enough, triggering the protection circuit of the projector.

100 mm (3-15/16") or longer

Security

When using this product, take safety measures against the following incidents.

f Personal information being leaked via this product f Unauthorized operation of this product by a malicious third party f Interfering or stopping of this product by a malicious third party

Take sufcient security measures. (x pages 152, 177)

f Make your password difcult to guess as much as possible. f Change your password periodically. f Panasonic Corporation or its afliate companies will never ask for your password directly. Do not divulge your

password in case you receive such inquiries.

f The connecting network must be secured by a rewall, etc. f Set a password for the web control and restrict the users who can log in.

DIGITAL LINK

“DIGITAL LINK” is a technology to transmit the video, audio, Ethernet, and serial control signals using a twisted pair cable by adding unique functions by Panasonic to the HDBaseTTM communication standard formulated by HDBaseT Alliance.

This projector supports the optional Panasonic DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) and peripheral devices by other manufacturers (twisted-pair-cable transmitters such as the “XTP transmitter” of Extron Electronics) that use the same HDBaseT manufacturers that the operation has been veried with this projector, visit the Panasonic website (http:// panasonic.net/avc/projector/). Note that the verication for devices of other manufacturers has been made for the items set by Panasonic Corporation, and not all the operations have been veried. For operation or performance

problems caused by the devices of other manufacturers, contact the respective manufacturers. This projector

does not support audio transmission because it is not equipped with audio function.

standard. For the devices of other

ENGLISH - 21

Chapter 1 Preparation — Precautions for use

Art-Net

“Art-Net” is an Ethernet communication protocol based on the TCP/IP protocol. By using the DMX controller and the application software, illumination and stage system can be controlled. Art-Net

is made based on DMX512 communication protocol.

Early Warning Software

The projector supports “Early Warning Software”, which monitors the status of the display (projector or at panel display) and the peripheral devices inside an intranet, and noties of abnormality of such equipment and detects signs of possible abnormality. Also, maintenance can be performed in advance, because this software gives notication of approximate time to replace consumables of the display, to clean each part of the display, and to

replace the components of the display.

Depending on the type of license, the number of displays that can be registered for monitoring varies. Limited to the rst 90 days after installation in a computer, it is possible to register up to 2048 units of displays free of charge.

Download the software from the Panasonic website (http://panasonic.net/avc/projector/pass/). It is necessary to register and login to PASS

*1 PASS: Panasonic Professional Display and Projector Technical Support Website

Visit the Panasonic website (http://panasonic.net/avc/projector/pass/) for details.

to download.

Disposal

To dispose of the product, ask your local authorities or dealer for correct methods of disposal.

Cautions on use

rTo get a good picture quality

In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen.

rDo not touch the surface of the projection lens with your bare hands.

If the surface of the projection lens becomes dirty from ngerprints or anything else, this will be magnied and

projected onto the screen.

Attach the supplied lens cover to the optional projection lens when not using the projector.

rDLP chips

f The DLP chips are precision-made. Note that in rare cases, pixels of high precision could be missing or always

lit. Such a phenomenon does not indicate malfunction.

f Directing a high-power laser beam onto the projection lens surface can damage the DLP chips.

rDo not move the projector or subject it to vibration or impact while it is operating.

Doing so may shorten the life of the built-in motor.

rLight source

The light source of the projector uses lasers, and has the following characteristics.

f Depending on the operating environment temperature, the luminance of the light source will decrease.

The higher the temperature becomes, the more the luminance of the light source decreases.

f The luminance of the light source will decrease by duration of usage.

The time until when the luminance of the light source decreases by half differs depending on the setting of the

[PROJECTOR SETUP] menu → [OPERATION SETTING] → [OPERATING MODE].

The estimated time until when the luminance of the light source decreases by half is as follows.

(The time is estimated when the [PICTURE] menu → [DYNAMIC CONTRAST] is set to [3].)

g When [OPERATING MODE] is set to [NORMAL]: Approximately 20 000 hours g When [OPERATING MODE] is set to [ECO]: Approximately 24 000 hours g When [OPERATING MODE] is set to [LONG LIFE1]: Approximately 43 000 hours g When [OPERATING MODE] is set to [LONG LIFE2]: Approximately 61 000 hours g When [OPERATING MODE] is set to [LONG LIFE3]: Approximately 87 000 hours

22 - ENGLISH

Chapter 1 Preparation — Precautions for use

The luminance can be maintained as much as possible for the same runtime by setting the [PROJECTOR

SETUP] menu → [OPERATION SETTING] → [CONSTANT MODE] to [AUTO]. These times are rough estimate when the projector is used without changing the [OPERATING MODE] and [CONSTANT MODE] settings, and

will vary depending on individual difference and usage condition. If brightness is noticeably reduced and the light source does not turn on, ask your dealer to clean inside the

projector or replace the light source unit.

rComputer and external device connections

f When connecting a computer or an external device, read this manual carefully regarding the use of power cords

and shielded cables as well.

rViewing 3D images

The projector can display the 3D video signal input in various formats such as “frame packing”, “side by side”, etc. You are required to prepare external devices for viewing 3D images (such as 3D eyewear, video signal output

devices) which are suitable for your 3D system. Connections of the projector and external devices vary depends on the 3D system to be used, see the operating instructions of external devices you use.

Refer to “List of 3D compatible signals” (x page 209) for the types of 3D video signals that can be used with the

projector.

ENGLISH - 23

Chapter 1 Preparation — Precautions for use

Accessories

Make sure that the following accessories are provided with your projector. Numbers enclosed in < > show the

number of accessories.

Wireless/wired remote control unit <1>

(N2QAYB001052)

Power cord

(K2CM3YY00007)

(K2CT3YY00014)

(K2CZ3YY00058)

(K2CZ3YY00032)

CD-ROM <1>

(TXFQB02WQGZ)

AA/R6 battery <2>

(K2CG3YY00189)

(For remote control unit)

Lens xing screw <1>

(XYN4+J18FJ)

Attention

f After unpacking the projector, discard the power cord cap and packaging material properly. f Do not use the supplied power cord for devices other than this projector. f For missing accessories, consult your dealer. f Store small parts in an appropriate manner, and keep them away from small children.

Note

f The type and number of the supplied power cords vary depending on the country or region where you purchased the

product.

f The model numbers of accessories are subject to change without prior notice.

24 - ENGLISH

Chapter 1 Preparation — Precautions for use

Contents of the supplied CD-ROM

The contents of the supplied CD-ROM are as follows.

Instruction/list (PDF) Operating Instructions – Functional Manual

Multi Monitoring & Control Software Operating Instructions Logo Transfer Software Operating Instructions List of Compatible Device

Models

Software Multi Monitoring & Control

Software (Windows) Logo Transfer Software

(Windows)

This is a list of display models (projector or at panel display) that are compatible with the software contained in the CD-ROM and

their restrictions.

This software allows you to monitor and control multiple displays

(projector or at panel display) connected to the LAN.

This software allows you to transfer original images, such as company logos to be displayed when projection starts, to the projector.

Optional accessories

(product name)

Projection lens

Ceiling Mount Bracket

Frame ET-PFD510 Replacement Filter Unit ET-EMF330

Smoke Cut Filter ET-SFR330

Early Warning Software

(Basic license/3-year

license)

Upgrade Kit ET-UK20

Auto Screen Adjustment

Upgrade Kit

Digital Interface Box ET-YFB100G DIGITAL LINK Switcher ET-YFB200G

*1 The sufx of the Model No. differs according to the license type. *2 Available worldwide except in the United States.

Zoom Lens

Fixed-focus Lens ET-D75LE50, ET-D75LE90 ET-PKD520H (for High Ceilings), ET-PKD520S (for Low Ceilings), ET-PKD520B (Projector

Mount Bracket)

ET-SWA100 Series

ET-CUK10

ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20, ET-D75LE30, ET-D75LE40

Model No.

Note

f The model numbers of optional accessories are subject to change without prior notice.

ENGLISH - 25

Chapter 1 Preparation — About your projector

About your projector

Remote control

Front Top

2 3

1 Remote control indicator

Blinks if any button in the remote control is pressed.

2 Power on <b> button

Sets the projector to projection mode when the <MAIN POWER> switch on the projector is set to <ON> and the power is turned off (standby mode).

3 Power standby <v> button

Sets the projector to the state where the projector is turned

off (standby mode) when the <MAIN POWER> switch on the projector is set to <ON> and in projection mode.

4 <MENU> button/<ENTER> button/asqw buttons

Used to navigate through the menu screen. (x page 76)

5 <ON SCREEN> button

Switches the on-screen display function on (display) or off (hide). (x page 72)

6 <AUTO SETUP> button

Automatically adjusts the image display position while projecting

the image.

[PROGRESS] is displayed while in automatic adjustment. (x page 72)

7 <ASPECT> button

Switches the aspect ratio of the image. (x page 72)

8 Number (<0> - <9>) buttons

Used for entering an ID number or a password in a multiple projector environment.

9 <STATUS> button

Displays the projector information.

10 <LIGHT> button

Pressing this button lights up the remote control buttons. The lights will go off when the remote control operation goes idle for 10 seconds.

11 <INPUT MENU> button

Displays the input selection screen. (x page 71)

Bottom

A strap can be attached depending on the usage.

12 Input selection buttons (<RGB1>, <RGB2>, <VIDEO>,

<S-VIDEO Y/C>, <DIGITAL LINK>, <DVI-D>, <HDMI>, <SDI>)

Switches the input signal to project. (x page 70) The <DISPLAY PORT> button, the <SLOT1> button, and the <SLOT2> button are not used with the projector.

13 <SHUTTER> button

Used to temporarily turn off the image. (x page 71)

14 <TEST PATTERN> button

Displays the test pattern. (x page 73)

15 Lens buttons (<FOCUS>, <ZOOM>, <SHIFT>)

Adjusts the projection lens. (x page 64)

16 <FUNCTION> button

Assigns a frequently used operation as a shortcut button. (x page 73)

17 <DEFAULT> button

Resets the content of the sub-menu to the factory default. (x page 77)

18 <ID SET> button

Sets the ID number of the remote control in a multiple projector environment. (x page 31)

19 <ID ALL> button

Used to simultaneously control all the projectors with a single remote control in a multiple projector environment. (x page 31)

20 <LOCK> button

Used to prevent unintended operation by careless pressing of the buttons and prevent draining the remote control batteries. Operation of each button on the remote control is disabled by

sliding the <LOCK> button toward the arrow.

21 Remote control signal transmitter

22 Remote control wired terminal

This is a terminal used to connect to the projector via a cable when the remote control is used as a wired remote control. (x page 32)

23 Strap hole

Attention

f Do not drop the remote control.

26 - ENGLISH

Chapter 1 Preparation — About your projector

f Avoid contact with liquids or moisture. f Do not attempt to modify or disassemble the remote control. f Do not swing the remote control holding onto the strap when a strap is attached. f Observe the following instructions that are indicated on the caution label at the back of the remote control:

g Do not use old battery with new one. g Do not use batteries other than the type specied. g Be sure the batteries are inserted properly.

For other instructions, read the instructions related to batteries that are described in “Read this rst!”.

1.Do not use old battery with new one.

2.Do not use batteries other than the type specified.

3.Be sure the batteries are inserted properly.

N2QAYB001052

Made in China

Caution label at the back of the remote control

Note

f When operating the remote control by directly pointing the remote control signal receiver of the projector, operate the remote control at

a distance approx. 30 m (98'5") or shorter from the remote control signal receiver. The remote control can control at angles of up to ±15° vertically and ±30° horizontally, but the effective control range may be reduced.

f If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate properly. f The signal will be reected off the screen. However, the operating range may be limited from light reection loss due to the screen material. f If the remote control signal receiver directly receives strong light, such as uorescent light, the remote control may not operate properly. Use

it in a place distant from the light source.

f The power indicator <ON (G)/STANDBY (R)> will blink if the projector receives a remote control signal.

ENGLISH - 27

Projector body

Chapter 1 Preparation — About your projector

Front

1 2 345 6

7 7

Rear

Side

88 12

13 14

16 17

Bottom

Projection direction

1 Remote control signal receiver (front)

2 Power indicator <ON (G)/STANDBY (R)>

Indicates the status of the power.

3 Light source indicator <LIGHT1>

Indicates the status of light source 1.

4 Light source indicator <LIGHT2>

Indicates the status of light source 2.

5 Temperature indicator <TEMP>

Indicates the internal temperature status.

6 Filter indicator <FILTER>

Indicates the status of the air lter unit.

7 Adjustable feet

Adjusts the projection angle.

8 Air intake port

9 Remote control signal receiver (rear)

10 Air exhaust port

11 Burglar hook port

Attaches a burglar prevention cable, etc.

12 Air lter cover

The air lter unit is inside.

13 Control panel (x page 29) 14 Connecting terminals (x page 30)

15 Security slot

This security slot is compatible with the Kensington security cables.

16 <AC IN> terminal

Connect the supplied power cord.

17 <MAIN POWER> switch

Turns on/off the main power.

Attention

f Do not block the ventilation ports (intake and exhaust) of the projector.

28 - ENGLISH

r Control panel

Chapter 1 Preparation — About your projector

1 2 3

7 8 9

13 14

1 Power on <b> button

Sets the projector to projection mode when the <MAIN POWER> switch on the projector is set to <ON> and the power is turned off (standby mode).

2 Power standby <v> button

Sets the projector to the state where the projector is turned

off (standby mode) when the <MAIN POWER> switch on the projector is set to <ON> and in projection mode.

3 <RGB1> button

Switches the input to RGB1.

4 <RGB2> button

Switches the input to RGB2.

5 <DVI-D> button

Switches the input to DVI-D.

6 <HDMI> button

Switches the input to HDMI.

7 <DIGITAL LINK> button

Switches the input to DIGITAL LINK.

8 <SDI 1/2> button

Switches the input to SDI.

9 Input selection terminal indicator

Indicator that shows the selected input terminal. This indicator lights up when a video signal is being input to the selected terminal, and blinks when there is no video signal being input.

10 <AUTO SETUP> button

Automatically adjusts the image display position while the image is projected. [PROGRESS] is displayed while in automatic adjustment. (x page 72)

11 <MENU> button

Displays or hides the main menu. (x page 76) Returns to the previous menu when a sub-menu is displayed.

If you press the <MENU> button on the control panel for at least three seconds while the on-screen display is off (hidden), the

on-screen display is turned on.

12 <LENS> button

Adjusts the focus, zoom, and shift (position) of the lens.

13 <ENTER> button

Determines and executes an item in the menu screen.

14 <SHUTTER> button

Used to temporarily turn off the image. (x page 71)

15 asqw buttons

Used to select items in the menu screen, change settings, and adjust levels.

Also used to enter a password in [SECURITY] or enter

characters.

16 Self-diagnosis display

Automatically displays the value of the input supply voltage, or

details of errors or warnings when they occur.

(x pages 74, 189)

ENGLISH - 29

r Connecting terminals

Chapter 1 Preparation — About your projector

1 2 3 4 5

7 8 9 10 116

1 <REMOTE 1 IN> terminal/<REMOTE 1 OUT> terminal

These are terminals to connect the remote control for serial control in a multiple projector environment.

2 <REMOTE 2 IN> terminal

This is a terminal to remotely control the projector using the

external control circuit.

3 <SERIAL IN> terminal

This is the RS-232C compatible terminal to externally control

the projector by connecting a computer.

4 <SERIAL OUT> terminal

This is a terminal to output the signal connected to the <SERIAL IN> terminal.

5 <3D SYNC 1 IN/OUT> terminal/<3D SYNC 2 OUT> terminal

These are terminals to input or output control signals when using the projector in 3D systems.

6 <SDI IN 1> terminal/<SDI IN 2> terminal

These are terminals to input SDI signals.

7 <RGB 1 IN> terminals (<R/P

<SYNC/HD>, <VD>)

These are terminals to input RGB signals, YCBCR/YPBPR

signals, Y/C signals, or video signals.

8 <RGB 2 IN> terminal

This is a terminal to input RGB signals or YC

9 <DVI-D IN> terminal

This is the terminal to input DVI-D signals.

10 <HDMI IN> terminal

This is the terminal to input HDMI signals.

11 <DIGITAL LINK/LAN> terminal

This is the LAN terminal to connect to the network. This is also

used when connecting a video signal transmission device via

the LAN terminal.

Attention

f When a LAN cable is directly connected to the projector, the network connection must be made indoors.

/VIDEO>, <G/Y>, <B/PB/C>,

/YPBPR signals.

BCR

30 - ENGLISH

+ 189 hidden pages