Panasonic PT-RQ50KU Product Sheet
Reinvent Your Business with the
PRELIMINARY
AS OF JUNE 2019
PT-RQ50K
3-Chip DLP™ Projector
AVAILABLE FROM DECEMBER 2019
World’s First
*1
50,000 lm*2 Laser Projector
with Native 4K Resolution
*
* Resolution 4096 x 2160 Pixels
Light Output
Resolution
PT-RQ50K
50,000 lm*
4K (4096 x 2160)
2
• Brilliant Native 4K Images for Absolute Immersion
Achieves Native 4K resolution at 50,000 lumens*2 with red and blue lasers in a dual SOLID
SHINE Laser Phosphor drive producing pure, vibrantly emotional color.
• Swift Setup with Single-Body Design
Produces 50,000 lm*2 from the same footprint as Panasonic’s 30,000-lm-class 3-Chip DLP™
laser models. Compact all-in-one body simplies transport and installation for fast setup
and adjustment.
• Reliable Operation for Mission-Critical Applications
Highlighting a “dualized” design concept are dual solid-state lasers and backup video inputs.
3
Hermetically sealed optics and lterless design contribute to 20,000 hours*
projection even in severe conditions.
*1 For laser-phosphor projectors in the single-body 50,000-lumens-class or higher, as of June 2019. *2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *3 At this time,
brightness will have decreased to approximately 50 % of its original level (Dynamic Contrast Mode [3]). Panasonic recommends cleaning or checkup at point of purchase after about 20,000 hours. Light-source lifetime may be reduced depending on environmental conditions. Replacement of parts
other than the light source may be required in a shorter period.
maintenance-free
PRELIMINARY
AS OF JUNE 2019
Specifications (Tentative)
Model
Projec tor typ e
DLP™ chip
Panel size
Display method
Number of pixels
Light source
1
Light output*
Time unti l light out put declin es to 50 %*
Resolution
Contrast ratio*
Screen size [diagonal]
Center-to-corner zone ratio*
1
1
Lens
Lens shift
Vertical (from center of screen)
Horizontal (fr om center of screen)
Keystone correction range
Installation
Terminals
MULTI P ROJECTO R SYNC I N
MULTI P ROJECTO R SYNC O UT
SERIAL IN
SERIAL OUT
REMO TE 1 IN
REMO TE 1 OU T
REMO TE 2 IN
DIGITAL LINK
LAN
USB
Expansion Slot 1
Expan sion Slot 2
Power supply
Power consumption
Cabinet materials
Operation noise*
Dimensio ns (W x H x D)
Weight*
1
3
Operating environment
Applicable software
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *2 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast
contents, NORMAL Mode, Dynamic Contrast [3], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment. *3 Average value. May differ depending on
the actual unit. *4 When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperature becomes 30 °C (86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude
between 2,700 m (8,858 ft) and 4,200 m (13,780 ft), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the projector.
PT- RQ50K
3-Chip D LP™ projector
35.1 mm (1.38 in) diag onal (17:9 aspect ratio)
DLP™ chip x 3, DL P™ projection system
8,847,360 (4 096 x 2160) pixels x 3 , total of 26,542, 080 pixel s
Laser di odes (B lue LD, Red LD)
50,00 0 lm
2
20,00 0 hours (NORM AL)
4K (409 6 x 2160 pixels)
20,00 0:1 (Full On/Fu ll Off, Dy namic Cont rast Mode: 3)
2.54 –25.4 m (100–1,000 in) w ith new optional len s for PT-RQ 50K, 17:9 asp ect ratio (d epending on lens)
TBD
New optio nal lenses for PT-RQ 50K (no lens includ ed with thi s model)
TBD
TBD
TBD
Horizontal/ver tical, free 360-degree installation
BNC x 1
BNC x 1
D-sub 9 -pin (fema le) x 1 for exte rnal cont rol (RS-232C c ompliant )
D-sub 9 -pin (male) x 1 fo r link control
M3 x 1 for wire d remote con trol
M3 x 1 for link co ntrol
D-sub 9 -pin (fema le) x 1 for exte rnal cont rol (parallel)
RJ-4 5 x 1 for network, D IGITAL LIN K connection ( HDBas eT™ complian t), 100Base-TX , compatible with A rt-Net, PJLink™ (Class 2 ), Deep Col or, HDCP 2 .2
RJ-4 5 x 1 for network, 10B ase-T/100Base -TX, comp atible with Art- Net, PJLink™ (Class 2)
USB Co nnector (Type A ) x 1 for Clonin g/W ireless Module (ou tput 5 V/2 A )
Interf ace Board for 12G-S DI (ET-MDN12G 10) supplie d
Optiona l interface board s, SLOT NX compat ible
AC 200 –240 V, 50/60 Hz; A C 100–120 V, 50 /60 Hz ( Brightness rest ricted with volt age lower th an 200 V )
TBD
Metal (partly plastic mold)
TBD
1,070 x 445 x 72 0 mm (42 1/8˝ x 17 17/32˝ x 28 17/32˝ )
Under 130 kg ( 287 lbs)
Operati ng tempera ture: 0– 45 °C (32–113 °F)*4, operati ng humidit y: 10–80 % (no con densatio n)
Logo Transfe r Software, Mul ti Monitoring & Con trol Softwar e, Geomet ry Manag er Pro, Smar t Projector Con trol for iO S/Android
™
Optional Accessories
• Zoom lens
ET-D3QW300 (1.13-1.72:1)
ET-D3QS400 (1.45-2.10:1)
ET-D3QT500 (1.98-3.40:1)
ET-D3QT600 (2.71-3.89:1)
ET-D3QT700 (3.89-5.43:1)
ET-D3QT800 (4.98-7.69:1)
• Interface Board for 12G-SDI Input
ET-MDN12G10
• Interface Board for HDMI®
(HDCP 2.2) Input (Input x 2)
ET-MDNHM10
• Interface Board for DVI Input
ET-MDNDV10
• Interface Board for 3G-SDI Input
TY-TBN03G
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability may vary on region and country. This product may be subject to export control regulations. DLP,
DLP logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments. The terms HDMI and
HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States and other countries. Trademark PJLink is a trademark applied for
trademark rights in Japan, the United States of America and other countries and areas. Android is a trademark or
registered trademark of Google LLC. IOS is a trademark or registered trademark of Cisco in the U.S. and other
countries and is used under license. SOLID SHINE is a trademark of Panasonic Corporation. All other trademarks are
the property of their respective trademark owners. © 2019 Panasonic Corporation. All rights reserved.
• Interface Board for DiplayPort
ET-MDNDP10
• DIGITAL LINK Switcher
ET-YFB200G
Note: ET-YFB200G is not compatible with 4K signals.
• Digital Interface Box
ET-YFB100G
Note: ET-YFB100G is not compatible with 4K signals.
™
• Early Warning Software
ET-SWA100 Series
Note: Part number suffix may differ depending on the license type.
* Multi Monitoring & Control Software Ver. 2.0 or later is required.
Please download from the following website:
https://panasonic.net/cns/projector/download/application/
For more information about Panasonic projectors, please visit:
Projector Global Website – panasonic.net/cns/projector
Facebook – www.facebook.com/panasonicprojectoranddisplay
YouTube – www.youtube.com/user/PanasonicProjector
All information included here is valid as of June 2019.
PT-RQ50KPRE2 Printed in Japan.
Loading...