• Moving image signal resolution: 480/60i*7, 576/50i*7 to 4096x2160
±29 % (±19 % with ET-D75LE6/ET-D3LEW60, ±21 %
As of April 20191/30
RQ22KG_STM_02_26/04/2019
3-Chip DLP™ Projector
PT-RQ22K
Keystone correction range
Projection
lens Model
No.
ET-D75LE6/ET-D3LEW60
ET-D75LE8/ET-D3LET80
ET-D3LEW10
ET-D75LE10
ET-D75LE20/ET-D3LES20
ET-D75LE30
ET-D75LE40
ET-D3LEW50
8
ET-D75LE95*
When using the optional Upgrade Kit (Model No.: ET-UK20)
Projection
lens Model
No.
ET-D75LE6/ET-D3LEW60
ET-D75LE8/ET-D3LET80
ET-D3LEW10
ET-D75LE10
ET-D75LE20/ET-D3LES20
ET-D75LE30
ET-D75LE40
ET-D3LEW50
8
ET-D75LE95*
Only [KEYSTONE] used[KEYSTONE] and [CURVED] used togetherOnly [CURVED] used
Vertical keystone
correction angle
+5 / -0
Vertical keystone
correction angle
+5 / -0
Horizontal keystone
α (°)
± 28
± 40
± 40
± 40
± 40
± 40
± 40
± 22
α (°)
± 28
± 45
± 40
± 40
± 40
± 45
± 45
± 22
correction angle
Only [KEYSTONE] used*
Horizontal keystone
correction angle
β (°)
± 15
± 15
± 15
± 15
± 15
± 15
± 15
± 15
β (°)
± 15
± 40
± 40
± 40
± 40
± 40
± 40
± 15
Vertical keystone
correction angle
0
9
Vertical keystone
correction angle
0
Horizontal keystone
α (°)
± 10
± 20
± 20
± 20
± 20
± 20
± 20
α (°)
± 10
± 20
± 20
± 20
± 20
± 20
± 20
correction angle
β (°)
± 10
± 15
± 15
± 15
± 15
± 15
± 8
-
± 8
-
± 15
± 8
[KEYSTONE] and [CURVED] used togetherOnly [CURVED] used
Horizontal keystone
correction angle
β (°)
± 10
± 15
± 15
± 15
± 15
± 15
± 15
± 8
Min. value of
R2/L2
-
Min. value of
R2/L2
-
Min. value of
1.6
0.2
1.1
1.1
0.9
0.6
0.4
2.0
-
1.2
0.2
0.9
0.9
0.7
0.5
0.3
1.5
-
3/L3
3.9
0.4
2.6
2.6
1.7
1.2
0.7
4.9
-
Min. value of
3/L3
3.0
0.3
2.0
2.0
1.3
0.9
0.5
3.7
-
[VERTICAL KEYSTONE] (viewed from the side)[HORIZONTAL KEYSTONE] (viewed from above)
Screen
Screen
Min. value of
R2/L2
0.9
0.2
0.6
0.6
0.5
0.4
0.2
1.2
-
Min. value of
R2/L2
0.7
0.1
0.5
0.5
0.4
0.3
0.2
0.9
-
Min. value of
R3/L3
2.3
0.3
1.5
1.5
1.0
0.7
0.4
2.9
-
Min. value of
R3/L3
1.7
0.2
1.1
1.1
0.7
0.5
0.3
2.2
-
Vertical arc correction (viewed from the side)Horizontal arc correction (viewed from above)
Projection distance
Arc radius
Screen
Arc center
Screen
Projection distance
Arc radius
Installation Ceiling/oor, front /rear, free 360-degree installation
Terminals
SDI IN 1 BNC × 1 SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424, 425-2 compliant
Dual link HD-SDI (Link A) signal SMPTE ST 372 compliant
Dual link 3G-SDI (Link 1) signal SMPTE ST 425-3 compliant Quad-link HD-SDI (Link 1) signal
Quad-link 3G-SDI (Link 1) signal SMPTE ST 425-5 compliant
SDI IN 2 BNC × 1 SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424, 425-2 compliant
Dual link HD-SDI (Link B) signal SMPTE ST 372 compliant
Dual link 3G-SDI (Link 2) signal SMPTE ST 425-3 compliant Quad-link HD-SDI (Link 2) signal
Quad-link 3G-SDI (Link 2) signal SMPTE ST 425-5 compliant
Screen
Arc center
Screen
Projection distance
Arc radius
Projection distance
Arc radius
As of April 20192/30
RQ22KG_STM_02_26/04/2019
3-Chip DLP™ Projector
PT-RQ22K
TerminalsSDI IN 3 BNC × 1
SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424, 425-2 compliant
Dual link HD-SDI (Link A) signal SMPTE ST 372 compliant
Dual link 3G-SDI (Link 1) signal SMPTE ST 425-3 compliant Quad-link HD-SDI (Link 3) signal
Quad-link 3G-SDI (Link 3) signal SMPTE ST 425-5 compliant
SDI IN 4 BNC × 1 SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424, 425-2 compliant
Dual link HD-SDI (Link B) signal SMPTE ST 372 compliant
Dual link 3G-SDI (Link 2) signal SMPTE ST 425-3 compliant Quad-link HD-SDI (Link 4) signal
Quad-link 3G-SDI (Link 4) signal SMPTE ST 425-5 compliant
DIGITAL LINK/LAN RJ-45 x 1 (for network, DIGITAL LINK connection, 100Base-TX,
compatible with Art-Net, PJLink™ (class 2), Deep Color, HDCP 2.2)
MULTI PROJECTOR SYNC IN
MULTI PROJECTOR SYNC OUT
BNC × 1, IN : TTL Hi-z
BNC × 1, TTL max10mA
SERIAL IN D-sub 9 pin × 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9 pin × 1 for link control (RS-232C compliant)
REMOTE 1 IN M3 stereo mini jack × 1 for wired remote control
REMOTE 1 OUT M3 stereo mini jack × 1 for link control
REMOTE 2 IN D-sub 9 pin × 1 for external control (parallel)
DC OUT 5V USB connector (type A) x 2 for power supply only (DC 5V, Max 2A)
Expansion Slot x 2 (SLOT 1㸪SLOT 2), SLOT NX(Compatible with Optional Board)
Power cord length 3.0 m(9 ft 10 in)
Cabinet materials Molded plastic
Dimensions (W × H × D) 598 × 270 × 725 mm (23 17/32˝ x 10 5/8˝ x 28 17/32˝ ) (not including protruding parts)
10
Weight*
Operation noise*
54.0 kg (119 lbs)
6
46 dB
Laser Classication Laser Class USA and Canada: Class 3R (IEC60825-1:2007)
Other countries or regions: Class 1 (IEC/EN 60825-1:2014)
Risk Group Risk group 3 (IEC 62471-5:2015)
Operating temperature Varies depending on operation mode setting.
The operating temperature range is 0°C to 45°C (32 °F to 113 °F).
(Less than 1,400m (4,593 ft) above sea level)
The operating temperature range is 0°C to 40°C (32 °F to 104 °F).
(Less than 1,400m (4,593 ft) to 4,200m (13,780 ft) above sea level)
•
If using at ambient operating temperatures of 35 °C (95 °F) or higher and at less than 2,700m (8,858 ft) above
sea level, or at ambient operating temperatures of 25 °C (77 °F) or higher and between 2,700m (8,858 ft) and
4,200m (13,780 ft) above sea level, the brightness of the light source may drop in order to protect the projector.
Operating humidity 10%–80% (no condensation)
Remote control unit
Power supply DC 3 V (AAA/R03/LR03 battery × 2)
Operation range Approx. 30 m (98 ft 5 in) when operated from directly in front of the signal receptor
Dimensions (W × H × D) 47.5 x 181.5 x 27.5 mm (1-7/8" x 7-5/32" x 1-3/32")
Weight Approx. 150g (5.3 ozs.) (including batteries)
Supplied accessories
Power cord (×2)
Wireless/wired remote control unit (×1)
Compatible Software
Logo Transfer Software Smart Projector Control(iOS/android)
Multi Monitoring & Control Software
Batteries for remote control (AA/R6 type ×2)
Lens hole cover (× 1)
Lens drop-prevention screw (× 1)
*1 When Standby Mode is set to ECO, network functions such as power on over LAN will not operate.
Additionally, only certain commands can be received for external control using the serial terminal.
*2 Refresh rate varies depending on scanning frequency.
*3 Around this time, light output will have decreased by 50%.
IEC62087: 2008 Broadcast contents, NORMAL mode, Dynamic Contrast [3], under conditions with 35˚C (95°F), 700m (2,297ft) above sea level,
and 0.15mg/m
*4 Luminance measured at center of screen.
*5 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*6 In AC200V, When using a projection lens other than ET-D75LE95.
*7 Pixel-Repetition signal(dot clock frequency 27.0MHz) only
*8 Only the vertical keystone correction angle can be corrected in the direction in which the projector body moves away from the screen.
*9 When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55°.
*10 Average value. May differ depending on the actual unit.
3
of particulate matter. Estimated time until light output declines to 50% varies depending on environment.
ET-D3LEW50
Fixed-focus lens (0.390:1) ET-D75LE95 Optional Fisheye Lens ET-D3LEF70
Ceiling Mount Bracket (for High ceilings)
Ceiling Mount Bracket (Projector Mount Bracket)
Lens Fixed Attachment ET-PLF10 Stepping Motor kit ET-D75MKS10*
ET-PKD520H
Ceiling Mount Bracket (for Low ceilings)
ET-PKD520S
ET-PKD520B Frame ET-PFD510
2
Upgrade kit ET-UK20 Auto Screen Adjustment Upgrade Kit ET-CUK10
Auto Screen Adjustment Upgrade Kit (PC)
ET-CUK10P Digital Interface Box ET-YFB100G
DIGITAL LINK switcher ET-YFB200G DVI-D input signal board ET-MDNDV10
HDMI input signal board ET-MDNHM10 3G-SDI input signal board TY-TBN03G*
12G-SDI signal board ET-MDN12G10
Interface Board for DisplayPort 2 input
ET-MDNDP10*
2
2
Early Warning Software(ET-SWA100*) *The symbol at the end of the part number will vary depending on the type of license.
*1 For more information, please see the specification sheet of lens.
*2 Please update to the latest firmware.
Dimensions
142
[5-19/32]
299
[11-25/32]
Adjustable feet
725
[28-17/32]
298
20
[25/32]
Adjustable feet
Position of screw holes to fix
projector and adjustable feet
131
[5-5/32]
48
[1-7/8]
250
[9-27/32]
250
[9-27/32]
[11-23/32]
145
[5-23/32]
110
[4-11/32]
145
[5-23/32]
135
[5-5/16]
Screw holes to fix the projector
(M6-27)
Use a torque screwdriver or Allen torque wrench to
tighten the fixing screws to their specified tightening
torques. Do not use elector impact screwdrivers.
110
[4-11/32]
270
307
[10-5/8]
[12-3/32]
516
[20-5/16]
598
[23-17/32]
258
[10-5/32]
644
[25-11/32]
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
As of April 20194/30
RQ22KG_STM_02_26/04/2019
3-Chip DLP™ Projector
Terminals
Power cord
PT-RQ22K
DC 1 output
1
DC 2 output
2
Remote 1 input
3
Remote 1 output
4
Remote 2 input
5
Serial input
6
Serial output
7
MULTI PROJECTOR SYNC IN
8
MULTI PROJECTOR SYNC OUT
9
LAN/DIGITAL LINK connector
10
SDI IN 1
11
SDI IN 2
12
SDI IN 3
13
SDI IN 4
14
For 200V - 240V
At projector
At power outletAt power outletAt power outlet
For 200V - 240VFor 200V - 240V
At projectorAt projector
At power outletAt power outlet
At projector
AC IN terminal
For 200V - 240V
At projector
2P/3W 15 A 250 V
For 200V - 240V
At projector
At power outlet
For 110V - 120V
At projector
At power outlet
(For Taiwan)
At projector
Power outlets that can be used
2P/3W 15 A 250 V
2P/3W 15 A 250 V
2P/3W 15 A 250 V
2P/3W 15 A 125 V
This projector supports AC100 V to AC120 V, and AC 200 V to AC 240 V as the power supply. A grounding
outlet supporting 15 A is required with either voltage.
The shape of the usable outlet differs depending on the power supply. Following illustrations are examples.
As of April 20195/30
RQ22KG_STM_02_26/04/2019
3-Chip DLP™ Projector
Standard setting-up position
Upper edge of projected image
Projected image
HH
Lower edge of projected image
PT-RQ22K
unit : mm (inch)
ø60.5
(2-3/8)
L
㻖㻝
298
(11-23/32)
(16-13/16)
L
L
427
㻖㻞
421–541
(16-9/16–21-5/16)
100
㻖㻞
Illustrations show the projector installed
using optional ceiling mount bracket
561–683
ET-PKD520H/ET-PKD520B.
(22-3/32–26-7/8)
*1 When the lens protrudes to the maximum.
212 mm (8-11/32) with the ET-D75LE6/
125 mm (4-29/32) with the ET-D75LE10
210 mm (5-19/32) with the ET-D3LEW10
121 mm (4-3/4) with the ET-D75LE20/
121 mm (4-3/4) with the ET-D75LE30
124 mm (4-7/8) with the ET-D75LE40
254 mm (10) with the ET-D75LE8/
203 mm (8) with the ET-D3LEW50
*2 Adjustable in 40 mm (1-9/16 in) steps.
ET-D3LEW60
ET-D3LES20
ET-D3LET80
(3-15/16)
Projected image
100
(3-15/16)
This illustration is not drawn to scale.
Caution:
• All construction work should be done by a qualified technician.
100
100
(3-15/16)
(3-15/16)
If the ET-D75LE95 is attached, refer to the projection
system dimension drawing and the projection distance
table for ET-D75LE95 specications.