Panasonic PT-RCQ10 User Manual

PT-RCQ10 Series

Detailed, Color-Rich Images and
Seamless Integration Help You Create
Immersive Environments

PRELIMINARY

AS OF AUGUST 2019

1-Chip DLP™ Projectors

AVAILABLE FROM NOVEMBER 2019

Black Models

PT-RCQ10 Series

PT-RCQ10

Light Output
Resolution
Lens

* Smooth Pixel Drive is a technology that shifts the pixel diagonally by 0.5 pixels to create a 2715 x 1697 high-resolution image.

With supplied lens Without lens With supplied lens

10,000 lm*

4,608,000 pixels / 2715 x 1697 dots (With Smooth Pixel Drive: ON)

PT-RCQ10L

1

PT-RCQ80 PT-RCQ80L

White Models

8,000 lm*

1

Without lens

• Detailed Images Rich in Natural Colors

Newly developed Rich Color Harmonizer achieves deeper, more vibrant color expression.
Combined with Smooth Pixel Drive, a technology that creates crisp yet smooth images using
1-axis wobbling, you can enjoy colorful and highly detailed images beyond the panel resolution.

• Seamless Integration with SLOT NX and Full Lens Lineup

With technologies to support 4K playback, including 4K signal input via HDMI
and optional SLOT NX interface boards, the seamless integration of 4K content is

™

greatly simplied. Compatibility with our 1-Chip DLP

lenses, including the ET-DLE020

Ultra-Short-Throw Zoom Lens, further enhances application exibility.

®

, DIGITAL LINK,

• Excellent Reliability in Tough Conditions

Further improvements to Panasonic’s unique SOLID SHINE Laser cooling system achieve

*2

20,000 hours
1-Chip DLP

*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *2 At this time, brightness will have decreased to approximately 50 % of its original level (Dynamic Contrast Mode [ON]).
Panasonic recommends cleaning or checkup at point of purchase after about 20,000 hours. Light-source lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period.

of maintenance-free operation, all from the same compact body-size as our

™

WUXGA laser models.

PRELIMINARY

AS OF AUGUST 2019

Specifications (Tentative)

Model With sup plied lens

Projec tor type
DLP™ chip

Without lens

Panel size
Display method
Number of pixels

Light source

1

Light output*

Time unti l light outpu t declines to 50 %*
Resolution

Contrast ratio*

Screen size [diagonal]
Center-to-corner zone ratio*

1

1

Lens

3

Lens shift*

Vertical (from center of screen)
Horizontal (fro m center of sc reen)

Keystone correction range

Keystone correction range
with optional ET-UK20 Upgrade Kit

Installation
Terminals

SDI IN
HDMI IN
DVI- D IN
MULTI P ROJECTO R SYNC IN
MULTI P ROJECTO R SYNC OU T
SERIAL IN
SERIAL OUT
REMO TE 1 IN

REMO TE 1 OUT
REMO TE 2 IN
LAN
DIGITAL LINK
USB

Expansion Slot
Power supply
Power consumption
Cabinet materials
Operation noise*

1

Dimensio ns (W × H × D)

6

Weight*

Operating environment
Applicable software

*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *2 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast
contents, NORMAL Mode, Dynamic Contrast [ON], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment. *3 Lens shift is not supported on the
ET-DLE055, and the optical axis is fixed with the ET-DLE035. *4 4K input signal is converted to 2715 x 1697 dots. *5 With legs at shortest position. *6 Average value. May differ depending on the actual unit. *7 When using the projector at an altitude lower than 2,700 m (8,858 ft) above
sea level, and the operating environment temperature becomes 30 °C (86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2,700 m (8,858 ft) and 4,200 m (13,780 ft), and the operating environment temperature
becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the projector.

PT- RCQ 10 PT- RCQ 80
PT- RCQ 10L PT- RCQ 80L

1-Ch ip DLP™ projector

17.0 mm (0.67 in) diagona l, 16:10 aspect ratio

DLP™ chip x 1, DLP™ projection system

2,304, 000 (1920 × 120 0) pixels

Laser diodes

10,000 lm

2

20,00 0 hours (NORM AL) / 24,000 ho urs (ECO )
4,608, 000 pixels / 2 715 x 1697 dots

* With Smo oth Pixel Drive: ON .
10,000:1 ( Full On/Full Of f, Dynamic Contr ast Mode: ON)

1.27–15.24 m (50 –600 in ), 1.27–5.08 m (5 0–200 in) wit h ET-DLE05 5, 2.54– 8.89 m (100– 350 in) with ET-D LE035 , 2.54–10.16 m (100– 400 in) with E T-DLE 020, 16:10 aspect ratio

90 %
PT-RCQ10: P owered zoom (throw r atio 1.71-2.41:1), F 1.7–1.9, f 25.6 –35.7 mm

PT-RCQ10L: Optional powered zoom/focus lenses

+50 %, -16 % (+40 %, -16 % with E T-DLE060 ) (powered)

+30 %, -10 % (+10 %, -20 % with ET-D LE020, +19 %, -10 % with ET-DL E060, +28 %, -10 % with ET-D LE105/ET-DL E085) (po wered)
Vertical: ±40° (±5° with ET-DLE020, ±16° with ET-DLE060, ±22° with ET-DLE105/ET-DLE085/ET-DLE055, +5° with ET-DLE035),

Horizon tal: ±15° (±10° with ET-D LE060) (can not be operat ed with ET-D LE035/E T-DLE020)
Vertical: ±45° (±16° with ET-DLE060, ±40° with ET-DLE150/ET-DLE250/ET-DLE170, ±22° with ET-DLE105/ET-DLE085/ET-DLE055),

Horizontal: ±40° (±10° with ET-DLE060, ±15° with ET-DLE105/ET-DLE085/ET-DLE055),
When [ VERTICA L KEYSTO NE] and [HO RIZONTAL K EYSTON E] are used s imultaneou sly, correction can not be made exceeding a to tal of 55°.

Ceiling/floor, front/rear, free 360-degree installation

BNC x 1: 3G/ HD-SDI inp ut

HDMI 19 -pin x 1 (Dee p Color, compat ible with HDCP 2. 2, 4K/60p s ignal input*4)

DVI- D 24-pin x 1 ( DVI 1.0 compliant, co mpatible with HD CP, compatible wit h single link only )

BNC x 1

BNC x 1

D-sub 9 -pin (female) x 1 f or external contr ol (RS-232C co mpliant)

D-sub 9 -pin (male) x 1 for li nk control

M3 x 1 for wire d remote contr ol

M3 x 1 for link co ntrol (for wired rem ote control)

D-sub 9 -pin (female) x 1 f or external contr ol (parallel)

RJ-4 5 x 1 for network con nection, 10B ase-T/100Base-T X, compliant wit h PJLink™ (Class 2 ), Art-Net

RJ-4 5 x 1 for network, D IGITAL LIN K connection ( HDBaseT™ complian t), 100Base-TX , compatible with A rt-Net, PJLink™ (Class 2 ), Deep Colo r, HDCP 2.2, 4 K/60 p signal input*

USB Co nnector (Type A ) x 1 for Cloning /Wireless Mo dule (output 5 V/50 0 mA)

SLOT for in terface boards , SLOT NX compati ble

AC 100– 240 V, 50/6 0 Hz

1,10 0 W

Molded plastic

43 dB ( Normal) /40 dB (Q uiet 1)/38 dB (Quie t 2)
PT-RCQ10: 4 98 x 200*5 x 581 mm (19 19/32˝ x 7 7/8˝ *5 x 22 7/8˝ ) (wi th supplied le ns)

PT-RCQ10 L: 498 x 200*
PT-RCQ10: 24. 2 kg (53.4 lbs) (wit h supplied lens )

PT-RCQ10 L: 23.4 kg (51.6 lbs) (with out lens)
Operati ng temperatu re: 0–45 °C (3 2–113 °F)*7, operati ng humidity : 10–80 % (n o condensat ion)

Logo Transfe r Software, Mul ti Monitoring & Con trol Softwar e, Geometr y Manager Pro, Smar t Projector Cont rol for iOS/Andr oid

5

x 538 mm (19 19/32˝ x 7 7/8˝ *5 x 21 3/16˝ ) (wi thout lens)

8,000 lm

PT-RCQ 80: Powered zoom (t hrow ratio 1.71-2.41:1), F 1.7–1.9, f 25.6–3 5.7 mm
PT-RCQ80L: Optional powered zoom/fo cus lenses

880 W

40 dB (N ormal)/38 d B (Quiet 1)

PT-RCQ 80: 498 x 200*5 x 581 mm (19 19/32˝ x 7 7/8˝ *5 x 22 7/8˝ ) (wi th supplied le ns)
PT-RCQ80L: 498 x 200*

PT-RCQ 80: 24.2 kg (53.4 lbs) ( with supplied lens)
PT-RCQ 80L: 23.4 kg (51.6 lbs) ( without len s)

5

x 538 mm (19 19/32˝ x 7 7/8˝ *5 x 21 3/16˝ ) (wi thout lens)

™

4

Optional Accessories

• Fixed-Focus Lens

ET-DLE035 (0.380:1) / ET-DLE055 (0.785:1)

• Zoom Lens

ET-DLE020* (0.280-0.299:1) / ET-DLE060 (0.600-0.801:1) /
ET-DLE085 (0.782-0.977:1) / ET-DLE105 (0.978-1.32:1) /
ET-DLE150 (1.30-1.89:1) / ET-DLE170** (1.71-2.41:1) /
ET-DLE250 (2.27-3.62:1) / ET-DLE350 (3.58-5.45:1) /
ET-DLE450 (5.36-8.58:1)

* Available from October 2019.
** US/Europe only. ET-DLE170 is equivalent of supplied lens.
Note: With WUXGA resolution. Value depends on resolution.

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability may vary by country or region. This product may be subject to export control regulations. DLP, DLP
logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments. The terms HDMI and
HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States and other countries. Trademark PJLink is a trademark applied for
trademark rights in Japan, the United States of America and other countries and areas. Android is a trademark or
registered trademark of Google LLC. IOS is a trademark or registered trademark of Cisco in the U.S. and other
countries and is used under license. SOLID SHINE is a trademark of Panasonic Corporation. All other trademarks are
the property of their respective trademark owners. © 2019 Panasonic Corporation. All rights reserved.

• Ceiling Mount Bracket

ET-PKD130H (6-axis, for high ceiling)
ET-PKD120H (for high ceiling)
ET-PKD120S (for low ceiling)

• Projector Mount Bracket

ET-PKD130B

• Interface Board for 12G-SDI Input

ET-MDN12G10

• Interface Board for HDMI®
(HDCP 2.2) Input

ET-MDNHM10

• Interface Board for DVI Input

ET-MDNDV10

• Interface Board for DisplayPort

ET-MDNDP10

• Wireless Module

AJ-WM50

Note: Product availability may vary by country
or region. The suffix at the end of the model
number is omitted.

• DIGITAL LINK Switcher

ET-YFB200G

Note: ET-YFB200G is not compatible
with 4K signals.

• Digital Interface Box

ET-YFB100G

Note: ET-YFB100G is not compatible

™

with 4K signals.

• Geometry Manager Pro
Software Upgrade Kit

ET-UK20

• Auto Screen Adjustment
Upgrade Kit

• Early Warning Software

ET-SWA100 Series

Note: Part number suffix may differ depending on
the license type.

* Multi Monitoring & Control Software Ver. 2.0 or
later is required. Please download from the
following website:
https://panasonic.net/cns/projector/download/
application/

ET-CUK10/ET-CUK10P

For more information about Panasonic projectors, please visit:

Projector Global Website – panasonic.net/cns/projector

Facebook – www.facebook.com/panasonicprojectoranddisplay

YouTube – www.youtube.com/user/PanasonicProjector

All information included here is valid as of August 2019.

PT-RCQ10 PRE5 Printed in Japan.