●PIAS (Panasonic Intelligent Auto Scanning) system
●Resolution: 480p/576p to 1 920 x 1 080
●Dot clock frequency: 148.5 MHz or less
●The HD/SYNC and VD terminals do not support 3 value SYNC.
●Moving image signal resolution: 480p/576p to 1 920 x 1 080
Still image signal resolution: 640 x 480 to 1 920 x 1 200 (non-interlace)
●Dot clock frequency: 25 MHz to 162 MHz
●Moving image signal resolution: 480p/576p to 4 096 x 2 160
Still image signal resolution: 640 x 480 to 1 920 x 1 200 (non-interlace)
●Dot clock frequency: 25 MHz to 594 MHz
●Moving image signal resolution: 480p/576p to 4 096 x 2 160
Still image signal resolution: 640 x 480 to 1 920 x 1 200 (non-interlace)
●Dot clock frequency: 25 MHz to 297 MHz
HD-SDI signal
3G-SDI signal
[VERTICAL KEYSTONE] (viewed from the side)[HORIZONTAL KEYSTONE] (viewed from above)
PT-MZ13KL
Screen
Arc center
Screen
Screen
Arc radius
Projection distance
Arc radius
Screen
Vertical arc correction (viewed from the side)Horizontal arc correction (viewed from above)
Arc radius
Screen
Arc center
Screen
Projection distance
Arc radius
As of November 2 0191/12
PT-MZ13KLG_STM_01_29/11/2019
Page 2
LCD Projectors
PT-MZ13KL
Geometry correction range
Projection lens
Model No.
ET-EMS600±40±15±20±151.12.60.61.5
ET-EMW200±14±8––––––
ET-EMW300±14±8––––––
ET-EMW400±22±15±8±824.81.22.9
ET-EMW500
ET-EMT700±40±15±20±150.81.50.40.8
ET-EMT800±40±15±20±150.40.70.20.4
When using the optional Upgrade Kit (Model No.: ET-UK20)
Projection lens
Model No.
ET-EMS600±40±40±20±150.920.51.1
ET-EMW200±14±8––––––
ET-EMW300±14±8––––––
ET-EMW400±22±15±8±81.53.70.92.2
ET-EMW500
ET-EMT700±40±40±20±150.61.10.30.6
ET-EMT800±40±40±20±150.30.60.20.3
* When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55°.
Only [KEYSTONE] used[KEYSTONE] and [CURVED CORRECTION] used togetherOnly [CURVED CORRECTION] used
Vertical
keystone
correction
angle α (°)
Only [KEYSTONE] used*[KEYSTONE] and [CURVED CORRECTION] used togetherOnly [CURVED CORRECTION] used
Vertical
keystone
correction
angle α (°)
Horizontal
keystone
correction
angle β (°)
±22±15±8±81.63.90.92.3
Horizontal
keystone
correction
angle β (°)
±22±15±8±81.230.71.7
Vertical
keystone
correction
angle α (°)
Vertical
keystone
correction
angle α (°)
Horizontal
keystone
correction
angle β (°)
Horizontal
keystone
correction
angle β (°)
Min. value of
R2/L2
Min. value of
R2/L2
●When [GEOMETRY] is used, the focus of the entire screen may be lost as correction increases.
●Make the curved screen a circular arc shape with one part of a perfect circle removed.
● Adjustment range of the [GEOMETRY] items may not match the listed projection range depending on the projection lens.
Use this projector within the projection range, otherwise the correction may not work.
HDMI INHDMI 19-pin × 1 Deep Color, compatible with HDCP 1x / HDCP2.2, 4K/60p*
DVI-D INDVI-D 24pin × 1 compatible with HDCP 1x
RGB1 IND-sub 15-pin (female) x 1 RGB/YP
SERIAL/MULTI
D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
BPR
PROJECTOR SYNC IN
SERIAL/MULTI
D-sub 9-pin (male) × 1 for link control
PROJECTOR SYNC OUT
REMOTE 1 IND-sub 9-pin (female) × 1 for external control (parallel)
REMOTE 2 INM3 jack × 1 for wired remote control
REMOTE 2 OUTM3 jack × 1 for link control ( for wired remote control)
DIGITAL LINKRJ-45 × 1
for network and DIGITAL LINK (video/network/serial control) (HDBaseT
100Base-TX, Art-Net compatible, HDCP 2.2compatible, Deep Color compatible, 4K/60p*4 signal input
LANRJ-45 × 1
for network connection, PJLink [class 2] compatible, 10Base-T/100Base-TX, Art-Net compatible
DC OUTUSB type-A × 1 for power supply DC5V, 2A
Power cord length3.0 m (9ft 10 in)
Cabinet materialsMolded plastic
Dimensions (W×H×D)*
6
Weight*
5
650×185×440 mm (25-19/32× 7-9/32× 17-21/64 in) (protruding parts not included)
22.3 kg (49.2 lbs) (without lens)
Operating noise35dB (NORMAL) /30dB (QUIET)
Operating
environment
Operating environment
temperature
Operating environment
0°C (32°F) to 45°C (113°F)*
10% to 80% (no condensation)
7
humidity
Laser Classification
Laser Class
Risk Group
USA and Canada: Class 3R (IEC60825-1:2007)
Other counties or regions: Class 1 (IEC/EN 60825-1:2014)
Power supply3V DC (AAA/R03/LR03 battery × 2)
Operation rangeApprox. 30 m (98 ft 5 in) (when operated directly in front of signal receptor)
Dimensions (W × H × D)48×145×27 mm (1-7/8 × 5-23/32 × 1-1/16 in)
6
Weight*
Supplied accessories
Wireless remote control unit (× 1)
Power cord (3.0m × 1) (× 2 for Europe and Asia model)
Batteries for remote control (R03/AAA type × 2)
Lens fixing screw (× 4)
Optional accessories
Ceiling Mount Bracket ET-PKD120H (for high ceilings)
Ceiling Mount Bracket ET-PKD120S (for low ceilings)
High-ceiling mount bracket (6-axis adjustment mechanism) ET-PKD130H
Attachment for ceiling mount bracket ET-PKE301B*
Digital Interface Box ET-YFB100G
DIGITAL LINK switcher ET-YFB200G
Geometry Manager Pro Upgrade kit ET-UK20
NFC Upgrade Kit ET-NUK10*
Auto Screen Adjustment Upgrade kit ET-CUK10/CUK10P
Early Warning Software ET-SWA100/105 series*
Zoom lens ET-EMW200 [Available from Apr. 2020]
Zoom lens ET-EMW300 [Available from Jan. 2020]
Zoom lens ET-EMW400 [Available from Nov. 2019]
Zoom lens ET-EMW500 [Available from Jan. 2020]
Zoom lens ET-EMS600 [Available from Nov. 2019]
Zoom lens ET-EMT700 [Available from Dec. 2019]
Zoom lens ET-EMT800 [Available from Jan. 2020]
Approx. 102g (3.60 ozs.) including batteries
9
10
11
PT-MZ13KL
Other Applications
Multi Monitoring and Control Software (for Windows)
Logo Transfer Software (for Windows)
Smart Projector Control (for iOS/Android)
Geometry Manager Pro (for Windows)
Weights and dimensions shown are approximate. Specifications subject to change without notice.
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2012 international standards.
*2 Value is for the supplied standard lens. The value varies depending on the lens.
*3 Around this time, light output will have decreased by approximately 50%, IEC62087: 2008 Broadcast contents, NORMAL mode, Dynamic Contrast (3), under conditions with 35°C (95°F), 700m (2,297ft) above sea level, and 0.15
3
of particulate matter. Estimated time until light output dcelines to 50% varies depending on environment.
mg/m
*4 4K/60p input signal is converted to projector's resolution (1920 x 1200)
*5 When adjustable feet shortened.
*6 Average value. May differ depending on models.
*7 When using the projector at an altitude lower than 2,700 m (8,858') above sea level, and the operating environment temperature becomes 35 °C (95 °F) or higher, the light output may be reduced to protect the projector.
*8 When the throw ratio is 3.4:1 or less: Risk group 2
When the throw ratio exceeds 3.4:1: Risk group 3
*9 When the projector is mounted to the existing Ceiling Mount Bracket (in combination with the Model No.: ET-PKD120H (for High Ceilings) or - ET-PKD120S (for Low Ceilings), and the Model No.: ET-PKE300B (Projector Mount
Bracket)), it is necessary to replace the drop-prevention - wire rope with the one corresponding to this projector. Consult your dealer. Drop-prevention set (service model no.: DPPW1004ZA/X1)
*10 The availability of this product varies depending on the country. For details, contact local sales company
*11 The symbol at the end of the part number will vary depending on the type of license.
As of November 2 0193/12
PT-MZ13KLG_STM_01_29/11/2019
Page 4
[5 33/64]
560 [22 3/64]
250 [9 27/32]
1234
89101112
576
LCD Projectors
PT-MZ13KL
Dimensions
26
[1 1/32]
185
[7 9/32]
117
[4 39/64]
3 [1/8]
443 [17 7/16]
588 [23 5/32]
650
[25 19/32]
113
[4 29/64]
119
[4 11/16]
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
140
336
[13 15/64]
* The above dimensions are obtained when the standard zoom lens is attached.
* Actual dimensions may differ depending on the product.
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.
* The throw ratio is based on the value during projection with the projected image size of 2.54 m (100").
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.
* The throw ratio is based on the value during projection with the projected image size of 2.54 m (100").
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.
* The throw ratio is based on the value during projection with the projected image size of 2.54 m (100").
.
Formula to calculate projection distance per Projection Lens
To use a screen size not listed in this manual, check the screen size SD (m) and use the respective formula to calculate
projection distance.
The unit of all the formulae is m. (Values obtained by the following calculation formulae contain a slight error.)
When calculating a projection distance using image size designation (value in inches), multiply the value in inches by 0.0254
and substitute it into SD in the formula for calculating the projection distance
1.Never place objects on top of the projector while it is operating.
2. Make sure there is the unobstructed space as shown below or more around the projector’s exhaust openings. In addition
to this space, also ensure that there is a sufficient work space for removing and installing filter and other parts.
3. Make sure that nothing blocks the projector’s air intake and exhaust openings. Also, install the pro-jector so that cool or
hot air from other air conditioning equipment does not flow directly toward the projector’s air intake or exhaust openings.
4. Do not install the projector in an enclosed space. If it is necessary to install it in an enclosed space, add a separate
ventilation system. If ventilation is insufficient, hot air will accumulate at the intake opening. This may cause the
projector’s protective circuit to interrupt projector operation.
PT-MZ13KL
500 mm (19-11/16") or longer
1 000 mm (39-3/8") or longer
500 mm (19-11/16") or longer
As of November 2 0199/12
PT-MZ13KLG_STM_01_29/11/2019
Page 10
LCD Projectors
List of compatible signals
The following table specifies the video signals compatible with the projector. For details of SDI signal, refer to “List of single link SDI compatible signals”.
This projector supports the signal with ✓ in the compatible signal column.
• The content of the compatible signal column is as follows.
-RGB:RGB input -DVI-D:DVI-D input -HDMI:HDMI input -DIGITAL LINK:DIGITAL LINK input
Signal name
(SIGNAL FORMAT)
480/60p720 x 48031.559.927.0
576/50p720 x 57631.350.027.0
720/60p1 280 x 72045.060.0
720/50p1 280 x 72037.550.074.3
1080/60i1 920 x 1 080i33.860.0
1080/50i1 920 x 1 080i28.150.074.3
1080/24p1 920 x 1 08027.024.0
1080/24sF1 920 x 1 080i27.048.0
1080/25p1 920 x 1 08028.125.074.3
1080/30p1 920 x 1 08033.830.0
1080/60p1 920 x 1 08067.560.0
1080/50p1 920 x 1 08056.350.0148.5
3840 x 2160/24p3 840 x 2 16054.024.0
3840 x 2160/25p3 840 x 2 16056.325.0297.0-3840 x 2160/30p3 840 x 2 16067.530.0
3840 x 2160/60p
3840 x 2160/50p
4096 x 2160/24p4 096 x 2 16054.024.0
4096 x 2160/25p4 096 x 2 16056.325.0297.0-4096 x 2160/30p4 096 x 2 16067.530.0
4096 x 2160/60p
4096 x 2160/50p
640 x 480/60640 x 48031.559.925.2
1024 x 768/501 024 x 76839.650.051.9
1024 x 768/601 024 x 76848.460.065.0
1280 x 800/501 280 x 80041.350.068.0
1280 x 800/601 280 x 80049.759.883.5
1280 x 1024/501 280 x 1 02452.450.088.0
1280 x 1024/601 280 x 1 02464.060.0108.0
1366 x 768/501 366 x 76839.649.969.0
1366 x 768/601 366 x 76847.759.885.5
1400 x 1050/501 400 x 1 05054.150.099.9
1400 x 1050/601 400 x 1 05065.260.0122.6
1440 x 900/501 440 x 90046.349.986.8
1440 x 900/601 440 x 90055.959.9106.5
1600 x 900/501 600 x 90046.449.996.5
1600 x 900/601 600 x 90055.960.0119.0
1600 x 1200/501 600 x 1 20061.849.9131.5
1600 x 1200/601 600 x 1 20075.060.0162.0
1680 x 1050/501 680 x 1 05054.150.0119.5
1680 x 1050/601 680 x 1 05065.360.0146.3
1920 x 1200/501 920 x 1 20061.849.9158.3
1920 x 1200/60RB1 920 x 1 200
*1 The signal with 1/1.001x vertical scanning frequency is also supported.
*2 YP
4:2:0 format only
BPR
*3 VESA CVT-RB (Reduced Blanking)-compliant
PT-MZ13KL
Resolution
(Dots)
3 840 x 2 160135.060.0
3 840 x 2 160135.060.0
3 840 x 2 160112.550.0297.0-3 840 x 2 160112.550.0594.0--
4 096 x 2 160135.060.0
4 096 x 2 160135.060.0
4 096 x 2 160112.550.0297.0-4 096 x 2 160112.550.0594.0--
*3
Scanning freq.
Horizontal
(kHz)
Vertical
(Hz)
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
74.060.0154.0
Dot clock freq.
(MHz)
RGBDVI-DHDMIDIGITAL LINK
✓✓✓✓
✓✓✓✓
74.3
✓✓✓✓
✓✓✓✓
74.3
✓✓✓✓
✓✓✓✓
74.3
74.3
✓✓✓✓
✓✓✓✓
✓✓✓✓
74.3
148.5
✓✓✓✓
✓✓✓✓
✓✓✓✓
297.0--
297.0--
297.0--
594.0--
297.0--
297.0--
297.0--
594.0--
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
✓✓✓✓
Compatible signal
✓✓
✓✓
✓✓
*2
✓
✓
*2
✓
✓
✓✓
✓✓
✓✓
*2
✓
✓
*2
✓
✓
*2
✓
-
*2
✓
-
*2
✓
-
*2
✓
-
Note
zA signal with a different resolution is converted to the number of display dots. The number of display dots is 1 920 x 1 200.
zThe “i” at the end of the resolution indicates an interlaced signal.
zWhen interlaced signals are connected, flickering may occur on the projected image.
zWhen the DIGITAL LINK connection is made with the long-reach communication method, the signal that the projector can receive is up to 1080/60p (1 920 x 1 080 dots, dot clock
frequency 148.5 MHz).
zEven if it is the signal listed in the list of compatible signals, it may not be displayed by the projector if the video signal is recorded in a special format.
As of November 2 01910/12
PT-MZ13KLG_STM_01_29/11/2019
Page 11
LCD Projectors
List of plug and play compatible signals
The following table specifies the video signals compatible with plug and play.
Signal with ✓ in the plug and play compatible signal column is the signal described in the EDID (extended display identification data) of the projector.
For the signal without ✓ in the plug and play compatible signal column, the resolution may not be selected on the computer even if the projector is supporting it.
• Input corresponding to each item in the plug and play signal column is as follows.
-RGB:RGB input -DVI-D:DVI-D input -HDMI:HDMI input -DIGITAL LINK:DIGITAL LINK input
Signal name
(SIGNAL FORMAT)
480/60p720 x 48031.559.927.0576/50p720 x 57631.350.027.0720/60p1 280 x 72045.060.0
720/50p1 280 x 72037.550.074.31080/60i1 920 x 1 080i33.860.0
1080/50i1 920 x 1 080i28.150.074.3-
1080/24p1 920 x 1 08027.024.0
1080/24sF1 920 x 1 080i27.048.0
1080/25p1 920 x 1 08028.125.074.31080/30p1 920 x 1 08033.830.0
1080/60p1 920 x 1 08067.560.0
1080/50p1 920 x 1 08056.350.0148.53840 x 2160/24p3 840 x 2 16054.024.0
3840 x 2160/25p3 840 x 2 16056.325.0297.0---3840 x 2160/30p3 840 x 2 16067.530.0
3840 x 2160/60p
3840 x 2160/50p
4096 x 2160/24p4 096 x 2 16054.024.0
4096 x 2160/25p4 096 x 2 16056.325.0297.0---4096 x 2160/30p4 096 x 2 16067.530.0
4096 x 2160/60p
4096 x 2160/50p
640 x 480/60640 x 48031.559.925.2
1024 x 768/501 024 x 76839.650.051.9---------1024 x 768/601 024 x 76848.460.065.0
1280 x 800/501 280 x 80041.350.068.0---------1280 x 800/601 280 x 80049.759.883.5----------
1280 x 1024/501 280 x 1 02452.450.088.0---------1280 x 1024/601 280 x 1 02464.060.0108.0----------
1366 x 768/501 366 x 76839.649.969.0---------1366 x 768/601 366 x 76847.759.885.5----------
1400 x 1050/501 400 x 1 05054.150.099.9---------1400 x 1050/601 400 x 1 05065.260.0122.6
1440 x 900/501 440 x 90046.349.986.8---------1440 x 900/601 440 x 90055.959.9106.5---------1600 x 900/501 600 x 90046.449.996.5---------1600 x 900/601 600 x 90055.960.0119.0
1600 x 1200/501 600 x 1 20061.849.9131.5---------1600 x 1200/601 600 x 1 20075.060.0162.0
1680 x 1050/501 680 x 1 05054.150.0119.5---------1680 x 1050/601 680 x 1 05065.360.0146.3---------1920 x 1200/501 920 x 1 20061.849.9158.3----------
1920 x 1200/60RB
*1 The signal with 1/1.001x vertical scanning frequency is also supported.
*2 YP
4:2:0 format only
BPR
*3 VESA CVT-RB (Reduced Blanking)-compliant
Resolution
(Dots)
Horizontal
3 840 x 2 160135.060.0
3 840 x 2 160135.060.0
3 840 x 2 160112.550.0297.0---3 840 x 2 160112.550.0594.0----
4 096 x 2 160135.060.0
4 096 x 2 160135.060.0
4 096 x 2 160112.550.0297.0---4 096 x 2 160112.550.0594.0----
1 920 x 1 200*374.060.0154.0
Scanning freq.
(kHz)
Vertical
(Hz)
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
PT-MZ13KL
Dot clock
freq.
RGB
(MHz)
EDID1EDID2EDID34K/60p4K/30p2K4K/60p4K/30p2K
✓
✓
74.3-
✓
✓
74.3-
✓
✓
74.3-
✓
74.3----------
✓
74.3-
148.5-
✓
✓
✓
297.0----
297.0----
297.0----
594.0----
297.0----
297.0----
297.0----
594.0----
✓✓✓✓✓✓✓✓✓✓
✓✓✓✓✓✓✓✓✓✓
-
✓
-
✓
-
✓
-
✓
Plug and play compatible signal
DVI-DHDMIDIGITAL LINK
-
✓✓✓✓✓✓✓
-
✓✓✓✓✓✓✓
-
✓✓✓✓✓✓✓
-
✓✓✓✓✓✓✓
-
✓✓✓✓✓✓✓
-
✓✓✓✓✓✓✓
-
✓✓✓✓✓✓✓
-
✓✓✓✓✓✓✓
-
✓✓✓✓✓✓✓
-
✓✓✓✓✓✓✓
-
✓✓✓✓✓✓✓
✓✓
✓✓
✓✓
*2
✓
✓
*2
✓
✓
✓✓
✓✓
✓✓
*2
✓
✓
*2
✓
✓
-
✓✓
-
✓✓
-
✓✓
--
-----
--
*2
--
✓
*2
--
✓
-----
-
✓✓
-
✓✓
-
✓✓
--
-----
--
*2
--
✓
*2
--
✓
-----
✓✓✓✓✓✓✓✓
✓✓✓✓✓✓✓✓
✓✓✓✓✓✓✓✓
✓✓✓✓✓✓✓✓
-
-
-
-
-
-
Note
zA signal with a different resolution is converted to the number of display dots. The number of display dots is 1 920 x 1 200.
zThe “i” at the end of the resolution indicates an interlaced signal.
zWhen interlaced signals are connected, flickering may occur on the projected image.
z When the DIGITAL LINK connection is made with the long-reach communication method, the signal that the projector can receive is up to 1080/60p (1 920 x 1 080 dots, dot clock
frequency 148.5 MHz).
zEven if it is the signal listed in the list of compatible signals, it may not be displayed by the projector if the video signal is recorded in a special format.
As of November 2 01911/12
PT-MZ13KLG_STM_01_29/11/2019
Page 12
LCD Projectors
List of single link SDI compatible signals
The following table specifies the single link SDI signals that the projector can project.
Signal name
(SIGNAL FORMAT)
720/60p1 280 x 72045.060.0
720/50p1 280 x 72037.550.074.3HD-SDIYP
1080/60i
1080/50i
1080/24p
1080/24sF
1080/25p
1080/30p
1080/60p
1080/50p
2K/24p
2K/25p
2K/30p
2K/48p
2K/50p
2K/60p
*1 The signal with 1/1.001x vertical scanning frequency is also supported.
Resolution
(Dots)
1 920 x 1 080i33.860.0
1 920 x 1 080i33.860.0
1 920 x 1 080i33.860.0
1 920 x 1 080i33.860.0
1 920 x 1 080i33.860.0
1 920 x 1 080i28.150.074.3HD-SDIYP
1 920 x 1 080i28.150.074.33G-SDI Level-ARGB4:4:4 10bit
1 920 x 1 080i28.150.074.33G-SDI Level-BRGB4:4:4 10bit
1 920 x 1 080i28.150.074.33G-SDI Level-ARGB4:4:4 12bit
1 920 x 1 080i28.150.074.33G-SDI Level-BRGB4:4:4 12bit
1 920 x 1 08027.024.0
1 920 x 1 08027.024.0
1 920 x 1 08027.024.0
1 920 x 1 08027.024.0
1 920 x 1 08027.024.0
1 920 x 1 080i27.048.0
1 920 x 1 080i27.048.0
1 920 x 1 080i27.048.0
1 920 x 1 080i27.048.0
1 920 x 1 080i27.048.0
1 920 x 1 08028.125.074.3HD-SDIYP
1 920 x 1 08028.125.074.33G-SDI Level-ARGB4:4:4 10bit
1 920 x 1 08028.125.074.33G-SDI Level-BRGB4:4:4 10bit
1 920 x 1 08028.125.074.33G-SDI Level-ARGB4:4:4 12bit
1 920 x 1 08028.125.074.33G-SDI Level-BRGB4:4:4 12bit
1 920 x 1 08033.830.0
1 920 x 1 08033.830.0
1 920 x 1 08033.830.0
1 920 x 1 08033.830.0
1 920 x 1 08033.830.0
1 920 x 1 08067.560.0
1 920 x 1 08067.560.0
1 920 x 1 08056.350.0148.53G-SDI Level-AYP
1 920 x 1 08056.350.0148.53G-SDI Level-BYP
2 048 x 1 08027.024.0
2 048 x 1 08027.024.0
2 048 x 1 08027.024.0
2 048 x 1 08027.024.0
2 048 x 1 08028.125.074.33G-SDI Level-ARGB4:4:4 10bit
2 048 x 1 08028.125.074.33G-SDI Level-BRGB4:4:4 10bit
2 048 x 1 08028.125.074.33G-SDI Level-ARGB4:4:4 12bit
2 048 x 1 08028.125.0
2 048 x 1 08033.830.0
2 048 x 1 08033.830.0
2 048 x 1 08033.830.0
2 048 x 1 08033.830.0
2 048 x 1 08054.048.0
2 048 x 1 08054.048.0
2 048 x 1 08056.350.0148.53G-SDI Level-AYP
2 048 x 1 08056.350.0148.53G-SDI Level-BYP
2 048 x 1 08067.560.0
2 048 x 1 08067.560.0
Scanning freq.
Horizontal
(kHz)
Vertical
(Hz)
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
PT-MZ13KL
Dot clock
freq.
(MHz)
74.3HD-SDIYPBP
74.3HD-SDIYPBP
74.33G-SDI Level-ARGB4:4:4 10bit
74.33G-SDI Level-BRGB4:4:4 10bit
74.33G-SDI Level-ARGB4:4:4 12bit
74.33G-SDI Level-BRGB4:4:4 12bit
74.3HD-SDIYPBP
74.33G-SDI Level-ARGB4:4:4 10bit
74.33G-SDI Level-BRGB4:4:4 10bit
74.33G-SDI Level-ARGB4:4:4 12bit
74.33G-SDI Level-BRGB4:4:4 12bit
74.3HD-SDIYPBP
74.33G-SDI Level-ARGB4:4:4 10bit
74.33G-SDI Level-BRGB4:4:4 10bit
74.33G-SDI Level-ARGB4:4:4 12bit
74.33G-SDI Level-BRGB4:4:4 12bit
74.3HD-SDIYPBP
74.33G-SDI Level-ARGB4:4:4 10bit
74.33G-SDI Level-BRGB4:4:4 10bit
74.33G-SDI Level-ARGB4:4:4 12bit
74.33G-SDI Level-BRGB4:4:4 12bit
148.53G-SDI Level-AYPBP
148.53G-SDI Level-BYPBP
74.33G-SDI Level-ARGB4:4:4 10bit
74.33G-SDI Level-BRGB4:4:4 10bit
74.33G-SDI Level-ARGB4:4:4 12bit
74.33G-SDI Level-BRGB4:4:4 12bit
74.33G-SDI Level-BRGB4:4:4 12bit
74.33G-SDI Level-ARGB4:4:4 10bit
74.33G-SDI Level-BRGB4:4:4 10bit
74.33G-SDI Level-ARGB4:4:4 12bit
74.33G-SDI Level-BRGB4:4:4 12bit
148.53G-SDI Level-AYPBP
148.53G-SDI Level-BYPBP
148.53G-SDI Level-AYPBP
148.53G-SDI Level-BYPBP
FormatColor formatSampling
R
BPR
R
BPR
R
R
BPR
R
R
R
BPR
BPR
R
R
BPR
BPR
R
R
4:2:2 10bit
4:2:2 10bit
4:2:2 10bit
4:2:2 10bit
4:2:2 10bit
4:2:2 10bit
4:2:2 10bit
4:2:2 10bit
4:2:2 10bit
4:2:2 10bit
4:2:2 10bit
4:2:2 10bit
4:2:2 10bit
4:2:2 10bit
4:2:2 10bit
4:2:2 10bit
4:2:2 10bit
4:2:2 10bit
As of November 2 01912/12
PT-MZ13KLG_STM_01_29/11/2019
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.