4 x 64 Kbit multibank antenna reference board
for the M24LR64-R Dual Interface EEPROM
Features
■ Ready-to-use printed circuit board (PCB)
including featuring four M24LR64-R ICs
connected in parallel to
– An 45 mm x 75 mm 13.56 MHz inductive
antenna etched on the PCB
–An I
Description
The ANT5-M24LR-A antenna reference board is a
ready-to-use PCB that features four M24LR64-R
Dual Interface EEPROM ICs connected to a
45 mm x 75 mm 13.56 MHz etched RF antenna
on one side, and to an I
The ANT5-M24LR-A allows system designers to
evaluate the M24LR64-R IC in multibank
configuration since the board is seen as a 256Kbit memory split into 4 banks of equal size.
2
C connector
2
C bus on the other side.
ANT5-M24LR-A
Data brief
Demonstration software for the DEVKIT-M24LRA, the DEMOKIT-M24LR-A, and the STARTKITM24LR-A are available from http://www.st.com,
together with the reference board Gerber files.
August 2010 Doc ID 17867 Rev 1 1/4
For further information contact your local STMicroelectronics sales office.
www.st.com
4
Figure 1. ANT5-M24LR-A block diagram
AI
!.4-,2!
-,22
)
#CONNECTOR
2&ANTENNA
-,22-,22 -,22
ANT5-M24LR-A
2/4 Doc ID 17867 Rev 1