Panasonic PT-L730NTE User Manual
Specifications and Main Features
- Model number: PT-L730NTE
- Power supply: Source voltage of between 100 to 240 volts while the frequency can be from 50 to 60 hertz.
- Power consumption: Power around 300 watts when on standby and not more than 1.7 watts when both WEB STANDBY and STANDBY switches are on
- Amps: between 3.5 A to 1.5 A
- LCD panel: Size of type 0.9 measuring approximately 22.86 mm
- Aspect ratio: 4:3 (16:9 may also be supported)
- Display method: Use of 3 transparent LCD panels that make the RGB colours.
- Pixels: Measurement of 786,432-blocks, 1024 - 768 multiplied by 3 panels.
- Lens: Focus lens that is adjustable, can be zoomed in from 1 to 1.3.
- Lamp: 220 kt UHM lamp.
- Luminosity: A level under 2,200 ANSI or luminescent units.
- Scanning frequency(for RGB signals): between 31khz and 91 kHz.
- Horizontal scanning frequency: from 50-85 Hertz
- Scanning frequency vertical: At lesser than 140 MHz.
- Colour system: NTSC supported as well as NTSC 4.43 and PAL systems, PAL-M and N and PAL 60 Euros as well as the SECAM system.
- Projection size: A range spanning from 101 to 162mm expanding to a maximum of 300 inches.
- Throw distance: Measuring around 38.8 feet to over 11.8 meters.
- Optical axis shift: only 9:1.
- Installation method: Use of links and ceiling mounts with the desk supported.
- Speakers: 1 ovals measuring cm by cm.
- Max usable volume: Not over 2 watt mono.
- Connectors supported: Dual line and other types of connectors make compatible devices with the system.
- Weight: 4.0 kg (8.8 lbs.), Length: 341 mm (13-13/32”), Width: 245 mm (9-5/8”), Height: 118 mm (4-5/8”)
- Relative Humidity: 20%-80% (non-condensing), Temperature: 0 °C—40 °C (32 °F—104 °F)
- Remote Control Unit: Weight: 108 g (3.8 ozs.), Dimensions: Height: 40 mm (1-9/16”), Length: 168 mm (6-19/32”), Width: 33 mm (1-9/32”); Operating range: 7m (23ft), Power supply: 3 V DC BAT AAA X 2
Frequently Asked Questions
- How would you describe the power supply specifications of the projector?
The specifications for the power supply of the projector include 100 V-240 V ~, 50 Hz/60 Hz.
- How bright is the projector?
Brightness for the PT-L730NTE projector reaches up to 2,200 lm/ANSI.
- Is it possible to connect it to a computer?
A Dual-link D-SUB HD 15-pin connector can be used to establish a connection between the projector and the computer.
- What is the total weight of the device?
Projectors weight around 4.0 kg (8.8 lbs).
- Should I be aware of anything before trying to change the lamp?
For the replacement lamp as it is made out of glass caution neeeded but yes you can replace it.
- What is the maximum and the minimum temperature at which the projector can work?
The projector is capable of going as low as 0 ^0C and as high as 40 ^0C.
- What is the compatibility with respect to video signals?
The projector is compatible with the following video signals: NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/PAL60/SECAM signals.
- Is there a complete kit along with the projector?
A kit is provided with this projector that includes a remote control, which uses 2 AAA batteries.
- What type of projected image can be viewed?
The projected image has an aspect ratio of 4:3, but can also accept 16:9.
- The lamp needs to be changed after how long?
Normally, the lamp does not need to be replaced after usage of two thousand hours.
User Manual
Loading...