Panasonic PPMF12D Operating Instructions

PRODUCT INSTRUCTION

Specification Revision Catalog
Number Date Section

INSTRUCTIONS 3028 0698 Brackets
MODEL:
PPMF12D

1) Remove the PVL1055 ceiling mount and PVL135 bracket from
there boxes.

2) Install bracket in the desired ceiling position with (4) bolts (not
included).

3) After the bracket is firmly attached to the ceiling, run all
necessary wiring through the provided hole on the side of the
bracket.

4) Direct the wiring through the bottom of the PVL135 bracket
and attach the PVL135 to the ceiling mount using the provided
hardware.

5) The next step is to attach the 1 ˚” pipe to the PVL135 bracket
and secure the housing to the pipe.

CAUTION:

This unit must be properly and securely mounted to a supporting
structure capable of sustaining the weight of the bracket and
camera assembly. Accordingly

1) The installation should be made by a qualified installer

2) The installation should be in compliance with local codes.

3) Care should be exercised to select suitable hardware to install
the unit, taking into account both the composition of the
mounting surface and the weight the hardware will be re­quired to sustain.

Be sure to periodically examine the unit and the supporting
structure to make sure that the integrity of the installation is intact.
Failure to comply with the foregoing could result in the unit
coming loose from the support structure and falling, with resultant
damages or injury to anyone or anything struck by the falling unit.

Qty Part # Description
A 1 30-VL1055 CEILING BRACKET
B 1 30-VL135 CEILING MOUNT SSIII
C 4 92-WSFL05 5/16 FLAT WASH SS
D 4 92-WSSL02 5/16 SPLIT LOCKWASHER SS
E 4 90-BTHH26 5/16X1 HEX HD. SS
F 1 Not Included 1 1/2" PIPE

1. Read Instructions - All the safety and operating instructions should

!

!

be read before the unit is operated.

2. Retain instructions - The safety and operating instructions should be
retained for future reference.

3. Heed Warnings - All warnings on the unit and in the operating
instructions should be adhered to.

4. Follow Instructions - All operating and user instructions should be
followed.

5. Electrical Connections - Only a qualified electrician should make
electrical connections.

6. Attachments - Do not use attachments not recommended by the
product manufacturer as they may cause hazards.

7. Cable Runs - All cable runs must be within permissible distance.

8. Mounting - This unit must be properly and securely mounted to a
supporting structure capable of sustaining the weight of the unit.
Accordingly,

a. The installation should be made by a qualified installer and should

conform to all local codes.

b. Care should be exercised to select suitable hardware to install the unit,

taking into account both the composition of the mounting surface and
the weight of the unit. Be sure to periodically examine the unit and the
supporting structure to make sure that the integrity of the installation
is intact. Failure to comply with the foregoing could result in the unit
separating from the support structure and falling, with resultant damages
or injury to anyone or anything struck by the falling unit.

ONE-YEAR LIMITED WARRANTY

Videolarm, Incorporated warrants that products sold hereunder
shall be fit for the ordinary purpose for which said products are
intended and shall be free from defects in material and workmanship
for a period of one year from date of sale to buyer. Note that all
electrical components will be warranted for a period of 1 year from date
of sale to buyer. Videolarm makes no other warranty of any kind with
respect to this product, whether expressed or implied, including,
without limitation, the implied warranty of fitness for a particular
purpose.

In the event of a breach of the above warranty, Videolarm shall, at
its option, repair or replace said product. This is Videolarm's sole
obligation under this warranty. In no event shall Videolarm be liable for
any incidental or consequential damages, as defined in section 2-715
of the Uniform Commercial Code by a breach of this warranty.

Videolarm shall repair or replace defective products upon shipment
of products prepaid to Videolarm, Inc., 2525 Park Central Blvd.,
Decatur, GA 30035.

SAFETY PRECAUTIONSIMPORTANT SAFEGUARDS

CAUTION

RISK OF

ELECTRIC SHOCK!

INSTALLATION BY QUALIFIED PERSONNEL ONLY.

The lightning flash with an arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of non-insulated
" dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

UNPACKING

Unpack carefully. Electronic components can be damaged if
improperly handled or dropped. If an item appears to have
been damaged in shipment, replace it properly in its carton and
notify the shipper.

Be sure to save:

1. The shipping carton and packaging material. They are the safest
material in which to make future shipments of the equipment.

2. These Installation and Operating Instructions.

SERVICE

The contact for Panasonic/Videolarm equipment is:

Panasonic Technical Center
52 West Gude Dr.
Rockville, MD 20850-1150
Phone: [phone]
Fax : [phone]

Repairs made necessary by reason of accident, misuse or normal
wear shall be charged at Videolarm's standard rate. This warranty
gives you specific legal rights, and you may also have other rights
which vary from state to state.