Panasonic PPFD9CN Specsheet

Housing :

PPFD9CN

PRODUCT FEATURES

• Pressurized camera housing for Panasonic
WV-NS954/WV-NS202A/WV-NF302/WV-NF284
unitized dome network camera systems

• Constructed of durable engineered plastic top,
945VA, with UV protected polycarbonate dome

• Standard with pendant mount

• PPFD9CN meets CE and IP67 standards

• Optional PWM20G gooseneck mount for
wall mount applications

• Pressurized to 7 psi (48KPa)

• Schraeder valve

• Relief valve

• Multi-pin sealed connector

• 50W heater turns on at 60°F (15°C)
and off at 80°F (27°C)

• Power and video surge protector

ELECTRICAL SPECIFICATIONS

Power: 24 VAC 52 watts (excluding camera)

24 VAC 68 watts with camera

MECHANICAL SPECIFICATIONS

Size (HxWxD):

13" x 11.5" x 11.5" (330 x 292 x 292mm)
Weight: 8 lbs. (3.7Kg) without camera

Construction:

Top: .125" (3mm) engineered plastic top,

945VA flame rated, and UV protected

Dome: Injection molded polycarbonate

Components:

Seals: .136" x 9.25" (3.5x235mm)

& .136" x 4.5" (3.5x114mm) O-rings

Pressure Relief Valve: 5-7 psi (35-48KPa)
Nitrogen input: Schraeder Valve
Power Connectors: (power/video/controls):

10-pin Souriau, hermetically sealed

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature: -50° F to +120° F

(-45 to 50°C)

Heater activates at +40° F (+/- 8° F), deactivates

at +60° F (+/- 5° F)

Effective Projected Area (EPA): approx. 180 inˆ2

(1162 cmˆ2)

Pressurized Dome

DESCRIPTION

The PPFD9CN pressurized dome housing is sealed and
charged with dry nitrogen. The nitrogen charge provides
maximum protection from moisture, dust and insects,
elements that normally would cause costly deterioration
of video components in other housings.

OPTIONS/ACCESSORIES

PPMF12D - Pendant mount bracket
PWM20G - Aluminum, gooseneck wall mount bracket
PWM30G - Aluminum, parapet mount bracket w/o extension
PPRM30G - Aluminum, parapet mount bracket
PACA2 - Aluminum, corner mount adaptor,

must be used with PWM20G

PAPM3 - Aluminum, pole mount adaptor,

must be used with PWM20G

SHIPPING

PPFD9CN: 11 lbs (5.0 Kg)
17" x 14" x 17" (432 x 356 x 432mm)

BID SPECIFICATIONS

PPFD9CN

The outdoor pressurized dome camera housing
shall be a Panasonic model PPFD9CN or equivalent.
The housing shall be designed for Panasonic’s
WV-NS954/WV-NS202A/WV-NF302/WV-NF284
unitized dome camera systems. The housing shall
be capable of withstanding a total of 7 psi (48KPa)
of nitrogen gas injected through a Schraeder valve
located on top machined aluminum plate.A pressure
relief valve located across from the Schraeder
valve will provide an escape for pressure exceeding
7 psi (48KPa). Two (2) o-ring seals shall be
included, 0.136"(3.5mm) x 9.25"(235mm) (inner
diameter) and 0.136"(3.5mm) x 4.5"(114mm) (inner
diameter). A 10-pin hermetically sealed connector,
located at the top of the pressurized housing shall
provide power, video and control functions. The
housing shall be constructed of 0.125" (3mm)
durable engineered plastic, UV with a UL flame
rating of 945VA. The lower dome portion shall be
constructed of distortion-free injection molded
polycarbonate and be 7.25"(185mm) in diameter.
The dome shall be held in place with minimum of
(9) fasteners, and a safety cable shall be provided
to hold the dome while servicing. Access to the
enclosure shall be from below with (9) captive
fasteners used to press the dome against a sealing

o-ring. A twist-off feature shall allow for the final
removal of the dome. The housing shall come
standard with pendant mount.

A wall mount bracket, Panasonic model PWM20G,
shall be available as an option. The housing shall
include a camera mounting bracket that integrates
a heater, blower, video and power surge protector
capable of clamping differential node voltage
between 54 - 72V and common mode voltage from
27 - 36V. The housing shall be powered with
24VAC (60Hz) and have a power consumption not
to exceed 52W not including the Unitized Camera.
The blower shall draw 1.4W continuous power. The
50W heater shall turn on at 60°F (15°C) and turn
off at 80°F (27°C). A ground isolation transformer,
Panasonic model PWBT1621, shall be available as
an option. The housing shall support a temperature
range of -50° to 120°F (-45° to 50°C).

The unit shall have a weight not to exceed 8 lbs.
(3.7Kg) (without camera) and dimensions of 13.0"
(330mm) H x 11.5"(292mm) W x 11.5" (292mm) D.

Product specifications are subject
to change without notice.

DISTRIBUTED BY:

1-877-733-3689

panasonic.com/security