Panasonic PPEH8 Operating Instructions

Manufactured by:

81-IN3069-9922

Before attempting to connect or operate this product, please read these instructions completely.

for

MODEL: PPEH8
Indoor Ceiling Housing

STANDARD INSTALLATION PROCEDURE
CONTENTS INCLUDE:

(1) Housing Top
(1) Housing Bottom
(1) Camera Bracket
(2) 1/4-20 x 5/8" Bolts
(2) Flat Washers
(2) Split-Ring Washers
(1) 1/4-20 x 3/8" Bolt
(1) O-Ring
(2) 10-32 x 1/2" Security Screws
(1) Right Angle BNC Connector

Use only Class 2 power supplies

!

1. Carefully remove the unit from the box.

2. Open the housing top by loosening the (2) 10-32 security

screws using the security tool provided (figure 1). Once
the screws have been loosened, the housing will open
slightly. Simply pull down on the top to open completely.

PRODUCT INSTRUCTIONS

5. Remove one of the three knockouts on the bottom of

the housing (see Figure 2). This will allow electrical and
video cables to pass through.

6. Secure the housing using the previously marked mount­ ing holes (hardware not included).

7. Install the camera on the camera bracket using the
1/4 x 20 bolt provide. The position of the camera
bracket is adjustable, depending on the camera size
and the viewing angle. You may install the bracket for
either top or bottom mount (see Figure 2). Do not
completely tighten the camera bracket at this time.

Right Angle
BNC
Connector

Top Mount

10-32 Security Screw

Housing Top
Figure 1

3. Position the housing in the desired location. Be sure the
location is structurally sound. Mark the four mounting
holes.

Figure 2

4. Remove the camera bracket by loosening the (2) 1/4
bolts on either side of the bracket. The nuts are held in
place by the bracket, allowing for self-tightening when
they are reinstalled.

Security Tool

Knockouts

Bottom Mount

Figure 3

8. Make all of the necessary electrical connections to the
camera.

9. Make final adjustments to the camera angle and tighten
the camera bracket.

10. Close the lower potion of the housing. The housing top
will snap to the housing bottom and hold. This will allow
you to tighten the (2) 10-32 security screws without
having to hold the housing in place (figure 4).

Figure 4

1. Read Instructions - All the safety and operating instructions

!

should be read before the unit is operated.

2. Retain Instructions - The safety and operating instructions
should be retained for future reference.

3. Heed Warnings - All warnings on the unit and in the operating
instructions should be adhered to.

4. Follow Instructions - All operating and user instructions should
be followed.

5. Electrical Connections - Only a qualified electrician should
make electrical connections.

6. Attachments - Do not use attachments not recommended by the
product manufacturer as they may cause hazards.

7. Cable Runs - All cable runs must be within permissible distance.

8. Mounting - This unit must be properly and securely mounted to

a supporting structure capable of sustaining the weight of the
unit. Accordingly:

a. The installation should be made by a qualified service
person, and should conform to all local codes.
b. Care should be exercised to select suitable hardware to
install the unit, taking into account both the composition of the
mounting surface and the weight of the unit. Be sure to
periodically examine the unit and the supporting structure to
make sure that the integrity of the installation is intact. Failure
to comply with the foregoing could result in the unit separating
from the support structure and falling, with resultant damages
or injury to anyone or anything struck by the falling unit.

SAFETY PRECAUTIONSIMPORTANT SAFEGUARDS

CAUTION

RISK OF

ELECTRIC SHOCK!

CAUTION: TO REDUCE THE RISK OF

ELECTRICAL SHOCK, DO NOT EXPOSE

COMPONENTS TO WATER OR MOISTURE.

The lightning flash with an arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of non-insulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to

!

UNPACKING

Unpack carefully. Electronic components can be
damaged if improperly handled or dropped. If an item
appears to have been damaged in shipment, replace it
properly in its carton and notify the shipper.

presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

Be sure to save:

1. The shipping carton and packaging material. They are the
safest material in which to make future shipments of the
equipment.

2. These Installation and Operating Instructions.

SERVICE

For service on Panasonic/Videolarm equipment contact:

Panasonic Technical Center
54 West Gude Dr.
Rockville MD 20850-1150

Phone: [phone]
Fax: [phone]

PANASONIC TECHNICAL SUPPORT

1-800-528-6747

9:00 AM - 5:00 PM EASTERN TIME

- 2 -