Panasonic POSM5V Specification

POSM5V / PISM5V

Surface-Mount Dome Enclosures

• Easy camera installation. Supports the WV-NS202A, WV-NF302, WV-NF284, WV-CF294, WV-SC385,

BBHCM403/580/581

• Compact, vandal-resistant, high-impact polycarbonate construction

• Rugged IP66 rating for camera protection

• Versatile mounting options: choose surface, pendant or wall mount

• .875” (for ½” or 16mm conduit) side knock-out conduit opening

• High efciency, thermostatically controlled H&B with separate power inputs for H&B and camera on outdoor models

• Optically transparent, UV-stabilized, thermoplastic polycarbonate capsule. Available in clear or smoked

Panasonic System Networks Company of America Surveillance, Monitoring and Video Imaging

Bid Specifications

The outdoor dome camera housing shall be a Panasonic Model POSM5V or equivalent. The indoor model shall be a Panasonic Model PISM5V or equivalent. The housing shall be
designed to fully support the WV-NS202A, WV-NS302, WV-NF284, WV-CF294, WV-SC385 and the BB-HCM403/580/581 camera models. The Panasonic Model POSM5V shall also
be equipped with 24VAC input blower and thermostatically controlled heater. The PISM5V does not include any electronics, and 12VDC or POE camera power must be supplied to
the housing. The upper dome housing shall be manufactured from a high-impact engineered thermoplastic polycarbonate with a UL flame rating of 94-V0. The dome shall be made
of an injection molded, optically clear thermoplastic polycarbonate. The dome shall be held in place with a minimum of three (3) fasteners and a safety cable shall be provided to
hold the dome while servicing. Access to the enclosure shall be from below with three (3) captive fasteners used to press the dome against a sealing O-ring. The wiring enters through
the top of the housing or through a .875” (for ½” conduit) opening on the side of the housing. The engineered thermoplastic top, with its reflective white paint, insulates internal
equipment. On the Panasonic POSM5V models the integrated heater/blower shall be a progressive power model and shall draw 40W maximum power. The heater shall turn on at
60°F (15°C) and turn off at 80°F (27°C). The housing shall support a temperature range of -40°F (-40°C) to 122°F (50°C).

Specifications

ELECTRICAL SPECIFICATIONS FOR: POSM5V

Heater and Blower 40 watts max., (slow blow fuse recommended for power supply)

Camera 12 watts- 12VDC, POE

MECHANICAL SPECIFICATIONS

Size 8.5” W x 8.25” H (216 x 209.6mm)

Weight 2.3 Lbs (1.043 kg)

Construction: Upper Housing Polycarbonate, 94VO flame rated, and UV protected

Lower Dome Optically clear, thermoplastic polycarbonate

Mounting Options Surface, pendant and optional wall mount available

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature -40°F (-40°C) to 122°F (50°C)

Heater/Blower activates at 60°F (15°C), deactivates at 80°F (27°C)

MODELS

POSM5V Outdoor surface mount, 12VAC input, H&B

PISM5V Indoor surface mount with no electronics

SHIPPING

Dimensions 9” x 9” x 11.375” (230 x 230 x 289mm) 5 Lbs. (2.3 kg)

Certifications/Ratings

Options/Accessories

PWMSM5V 1” NPT gooseneck wall mount

PMSM5 Pendant shroud/sunshield (must be used with

the PWM20G, PRM30G or PPRM30G)

panasonic.com/business/security/home.asp

Panasonic System Networks Company of America Surveillance, Monitoring and Video Imaging

Panasonic Service Center
415 Horizon Drive
Suite 350-B
Suwanee, GA 30024
[phone]

01272011

Design and specifications subject
to change without notice.