Panasonic PODV9CWTA Specsheet

PODV9CPTA / PODV9CWTA & PIDV9CPNSA / PIDV9CWNSA

Vandal Resistant Outdoor / Indoor Dome

• Pendant or wall mount models are available

• Cast aluminum upper housing with a rugged polycarbonate lower dome

• Vandal resistant enclosure meets IK10 rating

• 24 hour fan operation for effective heating and condensation protection

• Thermostatically controlled 24VAC heater

• Separate power input for heater and blower (H&B) and camera power

• Surge protection for video line and power line

• IP66 rated

Panasonic System Networks Company of America Surveillance, Monitoring and Video Imaging

Bid Specications

The outdoor dome camera housing shall be a Panasonic model PODV9CPTA, PODV9CWTA, PIDV9CPNSA, PIDV9CWNSA or equivalent. The housing shall be designed for the Unitized Surveillance Device Series WV-SC588, WV-SC384/385, WV-CS584. The PODV9CPTA and PIDV9CPNSA housings shall be a pendant mount, the PODV9CWTA and PIDV9CWNSA shall be a wall mount housing. The enclosure shall also be equipped with 24VAC input blowers and thermostatically controlled heaters. The housing top and wall/pendant mount bracket shall be manufactured from durable cast aluminum. The dome shall be made of an injection molded, optically clear, polycarbonate blend material. The dome shall be held in place with minimum of (3) fasteners, and a safety cable shall be provided to hold the dome while servicing. Access to the enclosure shall be from below with (3) captive fasteners. A twist-off feature shall allow for the nal removal of the dome. On pendant models all incoming wires will enter the unit through the top of the housing. A 1½” NPT quick release coupling will be provided at the top of the unit for ease of installation and quick removal of the unit. On wall mount models all incoming wires will enter through the back of the wall mount and run up into the housing. The housing shall include a camera mounting bracket that integrates a heater, blower, video and power surge protector capable of clamping differential node voltage between 240 - 300V and common mode voltage from 27 - 36V. The housing shall be powered with 24VAC (60Hz) and have a power consumption not to exceed 68W including Unitized Camera. The blower shall draw 1.6W continuous power. The 50W heater shall turn on at 60°F (15°C) and turn off at 80°F (27°C). A ground isolation transformer, Panasonic model PWBT1621, shall be available as an option. The housing shall support a temperature range of -20°F to 122°F (-29°C to 50°C).

Specications

ELECTRICAL SPECIFICATIONS

Power 24VAC 52 watts (excluding camera) 24VAC 68 watts (camera)

Surge Protector (Video) Clamping differential node voltage between 240-300V and common mode voltage from

27-36V

MECHANICAL SPECIFICATIONS

Size (HxWxD)

All Models 10.3” x 10.3” x 14.6” (262 x 262 x 371mm)

Weight 9 Lbs. (3.5 Kg) (without camera)

Construction

Upper Housing Cast aluminum

Lower Dome Polycarbonate blend material (Distortion free)

Mounting Brackets Cast or machined aluminum

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature -20°F (-29°C) to 122°F (50°C)

Heater activates at 60°F (15°C), deactivates at 80°F (27°C), 24VAC

Blower Continuous operation

SHIPPING SPECIFICATIONS

PODV9CPTA / PIDV9CPNSA 13 Lbs. (5 Kg) 19” x 12” x 12” (483 x 305 x 305mm)

PODV9CWTA / PIDV9CWNSA 14 Lbs. (5 Kg) 18” x 14” x 18” (457 x 356 x 457mm)

Certications/Ratings

NEMA4x

Options/Accessories

PWM20G Aluminum gooseneck wall mount, black

PPRM30G Aluminum parapet mount, black

PACA2 Aluminum corner mount adapter, black (must be used with PWM20G)

PAPM3 Aluminum pole mount adapter, black (must be used with PWM20G)

http://panasonic.com/security

Panasonic System Networks Company of America Surveillance, Monitoring and Video Imaging

Panasonic Service Center Heartland Services 1615 Dundee Ave. Dock G Elgin, IL 60120-1620 847-888-7000

Design and specications subject to change without notice.

51915