Panasonic PODV9CPTA Specsheet

Housings

Outdoor
Vandal Resistant

Dome Housings

DESCRIPTION

The PODV9CPTA & PODV9CWTA are
outdoor vandal resistant dome
housings for IP and Analog PTZ
dome cameras.
A heater and blower are standard
on both models.

MODELS

PODV9CPTA - Outdoor vandal resistant
pendant mount with dome housing.
White housing top, trim ring and
mount with clear dome. For use with
WV-SC588 ,WV-SC386, WV-SC385,
WV-SC384 and WVCS584 PTZ dome
cameras.-

PODV9CWTA - Outdoor vandal resistant
wall mount with dome housing.
White housing top, trim ring and
mount. with clear dome. For use with
WV-SC588,WV-SC386, WV-SC385,
WV-SC384 and WV-CS584 PTZ dome
cameras.

PODV9CPTA / PODV9CWTA

PODV9CPTA

Key Features:

- Pendant and Wall mount Models available

- Cast allumiminum upper housing with a rugged
polycarbonate lower dome dome

- Vandal resistant enclosure meets IK10 rating

- 24 hour fan operation for eective heating and condensation
protection

- Termostatically controlled 24VAC heater

- Separate power input for heater, blower and camera power

- Surge protection for video line and power line

- IP66 rated

- Supports 24VAC and 12VDC camera models

- -40°C to +50°C (-40°F to +122°F)

Options:

PODV9CPTA:

PPMF12D - Pendant Mount Bracket
PWM20G - Aluminum, Gooseneck wall mount bracket
PWM30G - Aluminum, Parapet mount bracket w/o extension
PPRM30G - Aluminum, Parapet mount bracket

PODV9CWTA

Made for Panasonic Canada Inc.
5770 Ambler Drive Mississauga, Ontario L4W 2T3
Phone: [phone] Fax: [phone]

PODV9CWTA:
PACA2 - Aluminum, Corner Mount Adaptor
PAPM3 - Aluminum, Pole mount adaptor
PSRCW2000 - Heavy-Duty parapet mount bracket

www.panasonic.ca

Bid Specification

Electrical Specifications

Power

Surge Protector (Video)

Camera Power

Either 24VAC or 12VDC - Max 18W

Mechanical Specifications

Product Dimensions (HxWxD)

PODV9CPTA 262 x 262 x 371mm (10.3” x 10.3” x 14.6”)

PODV9CWTA 262 x 262 x 371mm (10.3” x 10.3” x 14.6”)

Product Weight 3.5Kg (9Lbs.) (without camera)

Construction

Upper Housing: Cast Alluminum

Lower Dome: Polycarbonate

Mounting Brackets: Cast or machined alumin

um

Environmental Specifications

Operating Temperature -40°C to 50°C (-40°F to 122°F)

Heater activates at: 15°C, (60°F)

Heater de-activates at: 27°C, (80°F°)

Blower: Contunous Operation

24VAC, 52W (heater/Blower), 16W Camera

Clamping differential node voltage between 240­300V and common mode voltage from 27-36V

The outdoor dome camera housing shall be a Panasonic model PODV9CPTA, PODV9CWTA or equivalent. The housing shall be
designed for the unitized surveillance camera series WWVSC588, WVSC386, WVSC385, WVSC384, WVCS584. The
PODV9CPTA, housing shall be a pendant mount housing, The PODV9CWTA shall be a wall mount housing. The enclosure
shall also be equipped with 24VAC input blowers and thermostatically controlled heaters. The housing top and wall/pendant
mount bracket shall be manufactured from durable cast alluminum. The dome shall be made of an injection moulded, optically
clear, polycarbonate blend material. The dome shall be held in place with a minimum of (9) fasteners, and a safety cable shall
be provided to hold the dome while servicing. Access to the enclosure shall be from below with (9) captive fasteners. A twist-off
feature shall allow for the final removal of the dome. On pendant models all incoming wires will enter the unit through the top of
the housing. A 1/2” NPT quick release coupling will be provided at the top of the unit for ease of installation and quick remova
of the unit. On wall mount models all incoming wires will enter through the back of the wall mount and run up into the housing.
The housing shall include a camera mounting bracket that integrates a heater, blower, video and power surge protector capable
of clamping differential voltage between 240-300V and common mode voltage from 27 - 36V. The housing shall be powered with
24VAC (60Hz), and have a power consumption not to exceed 68W including the unitized camera. The blower shall draw 1.6W
continous power. The 50W heater shall turn on at 15°C (60°F), and turn off at 27°C (80°F). The housing shall support both
24VAC and 12VDC camera models. The housing shall supprt a temperature range of -40°C to +50°C (-40°F to +122°F).

Specifications

www.panasonic.ca