Panasonic Pod7c, Pod7cw Operating Instructions

Installation
Instructions
Outdoor Domed Housings
POD7C/POD7CW
Before attempting to connect or operate this product,
please read these instructions completely.
for
®
TABLE OF CONTENTS
• CAUTION
1. PRECAUTIONS ON INSTALLATION
2. DESCRIPTION
3. INSTALLATION 3-1 Camera Installation 3-2 Dome Assembly 3-3 Wall Mount Bracket Installation 3-4 Dome Installation 3-5 Care and Maintenance
4. SYSTEM CONNECTION
5. SPECIFICATIONS
CAUTION
This unit must be properly and securely mounted to a supporting structure capable of sustaining the weight of the bracket and camera assembly. Accordingly,
1. The installation should be made by a qualified installer.
2. The installation should be in compliance with local codes.
3. Care should be exercised to select suitable hardware to install the unit, taking into account both the composition of the mounting surface and the weight the hardware will be required to sustain.
Be sure to periodically examine the unit and the supporting structure to make sure that the integrity of the installation is intact.
Failure to comply with the foregoing could result in the unit coming loose from the support structure and falling, with resultant damages or injury to anyone or anything struck by the falling unit.
PRECAUTIONS ON INSTALLATION
• Installation should be in accordance with all applicable local and National Electric codes. Only
approved materials should be utilized.
• This unit must be properly and securely mounted to a supporting structure that is capable of sustaining
the weight of the housing and dome along with the unitized camera.
• Read instruction completely before installation and operation.
DESCRIPTION
• This product has been designed and engineered for the combination camera WV - CS604 and WV-CS404
for ease of installation and service.
• This product is a discreet outdoor housing designed for pendant (POD7C) or wall mount (POD7CW)
applications.
- 2 -
Check all contents before beginning installation.
A. Housing Assembly (POD7C) Housing Assembly (POD7CW)
1. 2 1/4 Coupling w/ 2 set screws 1. Wall Mount Bracket
2. Coupling Gasket 2. Housing Gasket
3. Housing Mounting Bracket 3. White Upper Top
4. Housing Gasket
5. White Upper Top
B. Bracket Assembly
1. Upper Housing Bracket
2. Lower Housing Bracket
3. 24 VDC Blower
4. 24 VAC Heater
5. PC Board Assembly
C. Dome Assembly
1. 7" Clear Plastic Dome
2. (3) Security Fasteners
D. Housing Packet
1. Security Tool
2. (4) 8 x 32 Bolts
3. (2) Molex Connector w/ 6 Pins
4. Instruction Manual
5. 1/4" x 20 x 1/2" Bolt
6. 1/4" Flat Washer
7. 1/4" Lock Washer
8. Plastic Lanyard
- 3 -
Loading...
+ 6 hidden pages