Panasonic PAN1326C Design Manual
PAN1326C Bluetooth
Basic Data Rate and Low Energy Module
Design Guide
Rev. 1.0
Wireless Modules
PAN1326C Bluetooth Module
Design Guide Rev. 1.0 Page 2
Overview
Panasonic’s new PAN1326C is a Host Controlled
Interface (HCI) Bluetooth RF module that brings
Texas Instrument’s seventh generation Bluetooth
core integrated circuit, the CC2564, to an easy-touse module format. The PAN1326C is Bluetooth-4.2compliant and it offers best-in-class RF performance
with about twice the range of other Bluetooth Low
Energy solutions. Panasonic’s tiny footprint
technology has produced a module of only
85.5 mm². The module is designed to accommodate
PCBs pad pitch of 1.3 mm and as few as two layers
for easy implementation and manufacturing. The
module has been designed to be 100 % pincompatible with previous generations of Texas
Instruments-based Bluetooth HCI modules.
Features
•
Bluetooth 4.2 Basic Data Rate (BR) and Low
Energy (LE)
•
Dimensions 15.6 x 8.7 x 1.9 mm
•
Integrated high speed crystal oscillator (26 MHz)
Bluetooth
•
Scatternet and piconets simultaneously
•
Synchronous Connection Oriented (SCO) links on
the same piconet
•
Support for All Voice Air-Coding - Continuously
Variable Slope Delta (CVSD), A-law, µ-law,
modified Subband Coding (mSBC), and
transparent (uncoded)
•
Assisted mode for HFP 1.6 Wideband Speech
(WBS) profile or A2DP profile to reduce host
processing and power
•
Support of multiple Bluetooth profiles with
enhanced QoS
•
Multiple sniff instances tightly coupled to achieve
minimum power consumption
•
Independent buffering for Low Energy allows large
numbers of multiple connections without affecting
BR or EDR performance
•
Built-in coexistence and prioritization handling for
BR, EDR, and Low Energy
•
Capabilities of link layer topology Scatternet - can
act concurrently as peripheral and central
•
Network support for up to 10 devices
•
Time line optimization algorithms to achieve
maximum channel utilization
Characteristics
•
Bluetooth 4.2
•
Receiver sensitivity -93 dBm
•
Output power 12 dBm
•
Power supply 1.7 to 4.8 V
•
Power consumption Tx 40 mA
•
Power consumption Rx 20 mA
•
Sleep mode 135 µA
•
Operating temperature range -45 ºC to +85 ºC
PAN1326C Bluetooth Module
Design Guide Rev. 1.0 Page 3
Table of Contents
1 About This Document ......................................................................................................................... 4
1.1 Purpose and Audience .............................................................................................................. 4
1.2 Revision History ......................................................................................................................... 4
1.3 Use of Symbols ......................................................................................................................... 4
1.4 Related Documents ................................................................................................................... 4
2 PAN1326C ............................................................................................................................................ 5
2.1 PAN1326C Block Diagram ........................................................................................................ 5
2.2 PAN1326C Placement Recommendations ................................................................................ 5
3 PAN1326C Breakout Board ................................................................................................................ 6
3.1 PAN1326C Breakout Board Component Placement ................................................................. 6
3.2 PAN1326C Breakout Board Schematic ..................................................................................... 7
4 EM Adapter BoosterPack ................................................................................................................... 8
5 MSP432 Launchpad ............................................................................................................................ 9
6 Appendix ........................................................................................................................................... 10
6.1 Ordering Information ................................................................................................................ 10
6.2 Contact Details ........................................................................................................................ 10
6.3 Product Information ................................................................................................................. 10
7 Life Support Policy ........................................................................................................................... 12
PAN1326C Bluetooth Module
1 About This Document
Design Guide Rev. 1.0 Page 4
1 About This Document
1.1 Purpose and Audience
This Design Guide applies to the Bluetooth development platform PAN1326C Experimenter Kit.
The intention is to enable our customers to easily and fast integrate our module PAN1326C in
their product. This guide describes the Hardware and gives useful hints.
1.2 Revision History
Revision
Date
Modifications/Remarks
1.0
14.11.2017
1st version.
1.3 Use of Symbols
Symbol
Description
Note
Indicates important information for the proper use of the product. Non-observance
can lead to errors.
Attention
Indicates important notes that, if not observed, can put the product’s functionality
at risk.
[chapter number]
[chapter title]
Cross reference
Indicates crossreferences within the document.
Example:
Description of the symbols used in this document 1.3 Use of Symbols.
1.4 Related Documents
Please refer to the Panasonic website for related documents 6.3 Product Information
For further information refer to the Ti WIKI for CC256x CC256x WIKI
Loading...