Panasonic PAN1323 User Manual
Product
TM
New
Introduction
Product
Introduction
New
NEW! PAN1323 SERIES BLUETOOTH
®
TRIPLE MODE RF MODULES
Three Standards, One Small Module!
One highly flexible RF Module, three popular standards: Bluetooth Classic,
Bluetooth Low Energy and ANT™. Panasonic introduces the NEW PAN1323
Series Triple Mode RF Module with embedded antenna. The PAN1323 Series
provides easily integrated Bluetooth Version 4.0 and ANT connectivity into new
and current designs by removing RF design and certification barriers from the
development of the application. Gain unprecedented access using this three
mode gateway module that can connect 14 Million ANT nodes to over 3 Billion
Bluetooth nodes. Use Bluetooth EDR to manage large data requirements while
taking advantage of extraordinary battery life using ultra lower network technology
found in Bluetooth Low Energy and ANT for small data loads.
Designers can reduce the size and cost of applications using Panasonic’s unique,
tiny footprint technology. Just 85.5 mm2, this family of modules are designed to
accommodate PCBs with pad pitch of 1.3mm with as little as two layers for easy
implementation and manufacturing. PAN1323 Series Modules have a Bluetooth
subsystem, FCC, CE, (ETSI) and IC certifications.
The NEW PAN1323 Series is based upon Texas Instrument’s CC256x integrated circuits and uses a host controlled interface
(HCI), a cost effective and flexible means to implement a Bluetooth network. HCI reduces BOM cost by eliminating redundant
processing capacity and giving designers the flexibility to work with a controller of their choosing, as the stacks reside
and execute on the application’s host processor. The PAN1323 Series is pad compatible with Panasonic’s PAN1325A,
PAN1326 and PAN1327 Series. A single PCB layout allows the flexibility of different protocol functionality implemented with
only firmware.
Product Performance:
• A Single Module for Three Standards: Bluetooth Classic,
Bluetooth Low Energy and ANT™.
o Bluetooth Version 4.0
o ANT™ is a wireless sensor network protocol
designed for ultra-low power applications
o Bluetooth Low Energy average power consumption
is about 1 uA.
• Cost Effective and Flexible HCI Interface
• Extraordinary Range with10 dbm of Tx Power
• Easily Integrates to Texas Instruments’ MSP430
and Stellaris ARM7 Controllers
• Small Footprint: 9mm x 9.5mm x 1.8mm
• Fully Certified, Bluetooth v4.0, FCC, CE and IC
• Complete Development Environment
• 100% Footprint Compatible with PAN13xx Series
• Optional Industrial Temperature Rating -40ºC to +85 ºC
• Supports All Bluetooth Profiles
• Compatible with 14 Million Deployed ANT Nodes
PAN1323 Part Numbers:
Part Numbers Description
ENW–89842A2JF Bluetooth, PAN1323 , Triple Mode with Antenna
EVAL_PAN1323 Bluetooth, PAN1323, Eval Kit, Includes MSP430 Experimenter Board
EVAL_PAN1323ETU Bluetooth, PAN1323, Development Module
The Blueto oth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
Panasonic Corporation of North America is under license. Other trademarks and trade names are those of their respective owners.
Website: www.panasonic.com/rfmodules
industrial@us.panasonic.co m
1-800-344-2112
All Rights Reserved. Specifications are subject to change without notice.
Copyright © 2012 Panasonic Corporation of North America.
PAN1323 NPI, FY12-063-XXX
New
Product
Introduction
Applications:
• Health and Wellness
–Heart Rate Monitor
–Blood Pressure Sensor
–Blood Glucose Monitor
–Thermometer
• Sports and Fitness
–Fitness Equipment
–Bicycle Computer
–Cadence
–Power Meter
–Pedometer
• Home Automation
–Flood Alarm
–Lighting Control
–HVAC Monitoring
and Control
• Gateways
• Industrial Sensors
• Mobile Accessories
• Irrigation
Block Diagram PAN1323:
Evaluation Kits:
EVAL_PAN1323 EVAL_PAN1323_ETU
Technical Specifications for PAN1323:
Parameter Value Condition / Notes
Receiver Sensitivity (BER=10-3) -93 dBm GFSK, Typical, Dirty TX On
Output Power 10 dBm VDD_In = VBAT
Power Supply 1.7 - 4.8 V Battery of DC/DC
Ultra Low Power Scan 135 uA 1.28s Interval
GFSK DH1\DH5 33 mA Full Throughput
Operating Temperature Range -20°C to + 70°C -40°C to + 85°C (Optional, Upon Request)
The Blueto oth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
Panasonic Corporation of North America is under license. Other trademarks and trade names are those of their respective owners.
Website: www.panasonic.com/rfmodules
industrial@us.panasonic.co m
1-800-344-2112
All Rights Reserved. Specifications are subject to change without notice.
Copyright © 2012 Panasonic Corporation of North America.
PAN1323 NPI, FY12-63-XXX
Loading...