Panasonic PAN1026A Design Manual
PAN1026A
Basic Data Rate and Low Energy Module
Design Guide
Rev. 1.0
Wireless Modules
PAN1026A Bluetooth Module
Design Guide Rev. 1.0 Page 2
Overview
The PAN1026A is a Class 2 Bluetooth 4.2
Basic Data Rate and Low Energy module for
easy implementation of Bluetooth functionality
into various electronic devices.
Features
•
Bluetooth 4.2 Basic Data Rate (BR) and Low
Energy (LE)
•
Embedded SPP profile
•
Embedded GATT profile
•
High-level API commands
•
Bluetooth 4.2 (LE) embedded GATT profile with
high level API commands, compatible with
Toshiba reference BLE profiles
•
Operational temperature range -40 to +85 °C
•
Operational voltage 2.7 V to 3.6 V +/-10 %
•
Power consumption Tx: 46 mA
•
Dimensions 15.6 mm x 8.7 mm x 1.9 mm
•
Output power 4 dBm
•
-88 dBm sensitivity
•
Integrated high speed crystal oscillator (26 MHz)
New Features
•
Increased (2.5 x) BLE data transfer rates through
extended MTU size (64 bytes to 160 bytes)
•
More complex BLE profiles possible through
extended GATT functionality
•
Data base pool, number of services and
characteristics, data flow control
•
Fast SPP classic connection/disconnection times
•
Interlaced inquiry/page scan and extended
inquiry response
•
Transmission (Tx) power control
•
Improved PER (peak-error-rate) for BLE traffic
•
Integration of BT 4.2 secure connecting feature
implementing ECDH technology
Bluetooth
•
GAP support for SPP
•
GAP peripheral and broadcast support for LE
•
GATT server and client mode support for LE
•
GAP central and observer not supported for LE
Interfaces
•
UART, GPIO (10 input/output pins), wake-up
control pins
Block Diagram
Chip
antenna
Toshiba
TC35661
EEPROM
32 kbit
UART
GPIOs
Host wake up
Reset
32 kHz input
Wake up
Vcc 3.3 V
LPF
PAN1026A
Bluetooth 4.2 Module
Crystal
26 MHz
PAN1026A Bluetooth Module
Design Guide Rev. 1.0 Page 3
By purchase of any of the products described in this document the customer accepts the document's
validity and declares their agreement and understanding of its contents and recommendations. Panasonic
Industrial Devices Europe GmbH (Panasonic) reserves the right to make changes as required at any time
without notification. Please consult the most recently issued Design Guide before initiating or completing a
design.
© Panasonic Industrial Devices Europe GmbH 2018.
This specification sheet is copyrighted. Reproduction of this document is permissible only if reproduction is
without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Do
not disclose it to a third party.
All rights reserved.
This Design Guide does not lodge the claim to be complete and free of mistakes.
Engineering Samples (ES)
If Engineering Samples are delivered to the customer, these samples have the status “Engineering
Samples”. This means that the design of this product is not yet concluded. Engineering Samples may be
partially or fully functional, and they may differ from the published Product Specification.
Engineering Samples are not qualified and they are not to be used for reliability testing or series
production.
Disclaimer
The customer acknowledges that samples may deviate from the Design Guide and may bear defects due
to their status of development and the lack of qualification mentioned above.
Panasonic rejects any liability or product warranty for Engineering Samples. In particular, Panasonic
disclaims liability for damages caused by:
The use of the Engineering Sample other than for evaluation purposes, particularly the installation
or integration in another product to be sold by the customer,
Deviation or lapse in function of the Engineering Sample,
Improper use of the Engineering Sample.
Panasonic Industrial Devices Europe GmbH disclaims any liability for consequential and incidental
damages. In case of any queries regarding the Engineering Samples, please contact your local sales
partner or the related product manager.
PAN1026A Bluetooth Module
Design Guide Rev. 1.0 Page 4
Table of Contents
1 About This Document ......................................................................................................................... 5
1.1 Purpose and Audience .............................................................................................................. 5
1.2 Revision History ......................................................................................................................... 5
1.3 Use of Symbols ......................................................................................................................... 5
1.4 Related Documents ................................................................................................................... 6
2 Overview .............................................................................................................................................. 7
2.1 Block Diagram ........................................................................................................................... 7
2.2 Pin Configuration ....................................................................................................................... 8
2.3 UART Interface ........................................................................................................................ 10
2.4 Bluetooth Features .................................................................................................................. 10
3 Reference Design.............................................................................................................................. 11
3.1 USB Evaluation Kit Schematic ................................................................................................. 11
3.2 Placement Recommendations ................................................................................................. 11
4 Software Related Documents Summary ......................................................................................... 13
4.1 Predefined High Level APIs ..................................................................................................... 13
4.2 Unique Mac/Bluetooth Address ............................................................................................... 14
5 USB Evaluation Kit ........................................................................................................................... 15
5.1 Overview for the USB Evaluation Board Options ..................................................................... 15
5.2 Radiation Pattern ..................................................................................................................... 16
5.3 Recommended Tools............................................................................................................... 17
5.4 Development of Applications ................................................................................................... 18
6 Appendix ........................................................................................................................................... 19
6.1 Ordering Information ................................................................................................................ 19
6.2 Contact Details ........................................................................................................................ 20
PAN1026A Bluetooth Module
1 About This Document
Design Guide Rev. 1.0 Page 5
1 About This Document
1.1 Purpose and Audience
This Design Guide applies to the Bluetooth development platform PAN1026A USB.
The intention is to enable our customers to easily and fast integrate our module PAN1026A in
their product.
This Design Guide describes the hardware and gives useful hints.
It is intended for hardware and software engineers. The product is referred to as
“the PAN1026A” or “the module” within this document.
1.2 Revision History
Revision
Date
Modifications/Remarks
1.0
2018-09-28
Update layout and structure changes
1.3 Use of Symbols
Symbol
Description
Note
Indicates important information for the proper use of the product.
Non-observance can lead to errors.
Attention
Indicates important notes that, if not observed, can put the product’s functionality
at risk.
Tip
Indicates useful information designed to facilitate working with the module.
[chapter number]
[chapter title]
Cross reference
Indicates cross references within the document.
Example:
Description of the symbols used in this document 1.3 Use of Symbols.
Requirement
Indicates a requirement that must be met before the corresponding tasks can be
completed.
Result
Indicates the result of a task or the result of a series of tasks.
This font
GUI text
Indicates fixed terms and text of the graphical user interface.
Example:
Click Save.
PAN1026A Bluetooth Module
1 About This Document
Design Guide Rev. 1.0 Page 6
Symbol
Description
Menu > Menu item
Path
Indicates a path, e.g. to access a dialog.
Example:
In the menu, select File > Setup page.
This font
File names, messages, user input
Indicates file names or messages and information displayed on the screen or to
be selected or entered by the user.
Examples:
pan1760.c contains the actual module initialization.
The message Failed to save your data is displayed.
Enter the value Product 123.
[ Key ]
Key
Indicates a key on the keyboard, e.g. [ F10 ].
1.4 Related Documents
Please refer to the Panasonic website for related documents 6.2.2 Product Information.
Loading...