Panasonic NA-FS16G2, NA-FS14G2 Service Manual

CONTENTS

1.Specifications……………………………………………………………………………

1

2.Technical Descriptions……………………………………………………………………………

2

3.How to Install……………………………………………………………………………

3

4.Operation Instruction……………………………………………………………………………

4

5.Test Mode……………………………………………………………………………

6

6.Troubleshooting Guide……………………………………………………………………………

8

7.Disassembly Instructions…………………………………………………………

10

8.Wiring Diagram……………………………………………………………………………

15

9.Parts Location & Replacement Parts List……………………………………………………………………………

16

ORDER NO. TAM1202001CE

NA-FS16G2/NA-FS14G2

© 2012 Panasonic Taiwan Co., Ltd. All rights reserved.
Unauthorized copying and distribution is a violation of law.

‧Product Color

‧Destination

: Sliver / White

: Panama

Page

1.Specifications

NA-FS16G2 NA-FS14G2

Power source AC 110-120 V , 60 Hz AC 110-120 V , 60 Hz

Power consumption 430 W 420 W

(Motor) Output 200 W 185 W

Laundry amount 16 kg 14 kg

Spin (Clothes load) 610 ~ 630 rpm 610 ~ 630 rpm

Pulsator (Clothes load) 60 ~ 130 rpm 60 ~ 130 rpm

Dimension(mm)

Width: 640 / Depth:667 / Height:1032 Width: 640 / Depth:667 / Height:1032

Water level(L)

99 / 92 / 86 / 80 / 74 / 68 / 62 / 56 / 50 / 45 / 40 98 / 92 / 86 / 80 / 74 / 68 / 62 / 56 / 50 / 45 / 40

Standardized water consumption 190 L 185 L

Operating Water pressure

3×104 - 1×106 Pa 3×104 - 1×106 Pa

Machine weight 54 kg 54 kg

Safety switch Lid and unbalance switch Lid and unbalance switch

Buzzer

Cycle-end buzzer, Give an alarm Cycle-end buzzer, Give an alarm

Bleach inlet Providing Providing

Lint filter Providing Providing

Softener Dispenser Providing Providing

Auto power off Providing Providing

Accessories

Water Supply Hose

(One each for cold and hot water)

Water Supply Hose

(One each for cold and hot water)

Water Tap Adaptor Water Tap Adaptor

Drain Hose Drain Hose

Events

Model

-1-

2.Technical Explanation

2.1 The water flow of pulsator

2.2 Air Dry Course

When the tub is rotationg, it can suck dry air inlet and keep the tub dry.
Purpose to prevent the mould growth on the surface of the tub and
the outer tub.

Rotating fins on the bottom suck in water

which is pumped to the upper nozzle and
released as a high-pressure splash.

Bottom

Strong splashes are

A powerful motor rotates the Big Beat (BB)
Flapper to create a vortex.

(1)Stream of a big horizontal rotation is made

from the big outer blades of Large Pulsator.
(2)The stream of a small horizontal rotation is
made fromthe small blades in the center part
of Large Pulsator.
(3)The stream in the vertical direction made
from the blades of Small Pulsator (Pulsator
cap), it is pushed in the direction of the
perimeter of the tub by a small horizontal
rotation stream of the above-mentioned of
(2), and it becomes a diagonal stream.

Top

Beat Screw

Beat Flash

Beat Tide

-2-

3.How to install

29 - 980 kPa

nut.

To connect the drain hose

1.Connect the drain hose securely to the drain
hose connection of the washing machine .

And move the hose band next to the body.

2. Follow the limits of maximum height (1.10m)

and minimum (0.70m) for installation of

drain hose.

-3-

4.Operation Instruction

4.1 Indicators and buttons

Attention : If you need to change the setting after the cycles has already started, turn the power off and then back on.

-4-

Indicates the appropriate waterlevel

according to the laundry amount.

Water Level / Volume Indicator

Indicates the cycle in

progress by flashing.

Progress Indicator

The power automatically turns off when a

course is finished, or if washing is not

begun within 10 min. turning the power on.

Power Switch

According to laundry volume

and stain, you can select a

suitable course by yourself.

Program

You can choose the

finishing time either

after 2 to 24 hourse.

Reserve

The lamp will light

when Child lock

mode is set.

Child lock

Setting can be changed

according to your

preference.

Water Level

Custom cycles

can be chosen.

Process

Use to select wash water temperature

Press button to select

01(hot),02(warm),03(cold).

Temperature

Push this botton to start.

Push this botton to stop

during the cycle.

Start / Pause

Drying the tub

to

prevent mould

growth.

Air Dry

It is suitable for washing

stained laundry and soiled

collar and wrist portions of

dress shirts .

Soak

Indicates which

Course has been

selected.

Course Indicator

4.2 Wash cycle

Process

COURSE SOAK

WATER

LEVEL

WASH

TIME

RINSE

CYCLE

SPIN
TIME

NORMAL

○

*１

6~15 min.

*１

1~3 times

(Refill)

1~9 min.

*１

MY FAVORITE

○

*１

6~15 min.

*１

1~3 times

(Refill)

1~9 min.

*１

SPEEDY ─ *１

6 or 9 min.

2 times

(Refill)

3 min.

*１

EXTRA RINSE

○

*１

6~15 min.

*１

1~3 times

(Refill)

1~9 min.

*１

COMFORTER

○

86L~99L

6~15 min.

*１

1~3 times

(Refill)

1~9 min.

*１

DELICATE

─ 50L~62L

6 min.

1~3 times

(Refill)

1 min.

TUB HYGIENE ─ 99L

15 min. 3 times 3 min.

*１ It is setting by laundry amount detects.

W

A
S

H
C

O
U
R

S
E

S
E

L

E

C

T

-5-

5. Test Mode

1.Set the power switch to "off".

2.Press and hold both the "Water lever" and "Wash" buttons with one hand.

3.Press the power switch to "on".

4.Release your fingers from the buttons and power switch which you pressed in steps (2) and (3) .
(Check A can be carried out in this state with your fingers released)

5.Within three seconds press the "Water lever " button to set the desirer check procedure.
(Carry out checks B, C, E, M, G and H)

Check Contents

• When the end buzzer sounds three

• Cycle end buzzer times, the lamps will simultaneously

0 A • Timer indicator flash on and off in the remaining

• Auto power off time display, and the power will auto-

matically be switched off immediately

after operation is finished.

• Even if there is no water in the tub, the washing

• Washing

operation will continue for 6 minutes.

1 B

operation

• Press the "wash" button once FV-1 operates,

and press twice to operate FV-2.

• If the PCB fault occurred, an error indication

"H05" will display.

• The spinning operation will continue for 7 minutes.

• Spin operation

**Check the lid & SF switch operation

2 C

• Lid/SF switch

*While opening lid

1) "74L" lights up … Lid switch working

2) "86L" lights up … SF switch working

Operation condition

Check

Procedure

Lamp illumination condition

Number of timers

the "Water lever"
button is pressed

Check H

Check G

Check M

Check E

Check A

Check B

Check C

(2)

(3)

(1)

-6-

Check Contents

• Press the "WASH" button to adjust L0 (initial

mode) to L1 (1-rank higher water level).

• Press "STAR/PAUSE" button to confirm.

• In case to change PCB or remove the V-belt.

set the V-belt tension to initail mode for useing
below procedure.

M • The initial display will be indicated "b0"

after that, press "START / PAUSE" button once,
it shall be listened click sound six times to
set properly.

• "Digit lights" shall be indicated "E" initially,

Press "WASH" button to show the last error,
and press the wash botton again to return
to initial mode.

G • If any error message occurred in the

past, "H" or "U" and some number shall
be indicated alternately.
If no error message occurred, the light
indicates "00".

‧"Digit lights" shall be indicated "C" initially,

Press "WASH" button to change "Indication

H of dight" of operation times.

Press once: Digit "Thousand‧Hundred"

Press twice: Digit "Ten‧One"

Operation condition

Check

Procedure

Lamp illumination condition

•Set to initial

mode for
tension of the
Belt

Number of times
the "Water lever"
button is pressed

3

E

4

• Indicate the

error message
of the last time.

• Indicate the

operation
times.

• Adjust the

water amount
against laundry
amount
detection

5

6

-7-