Panasonic MK-F800 Operating Instructions [cz]
Deutsch
Nederlands
FrançaisEnglish PolskiDansk SuomiČeský MagyarItaliano Español Svenska
Operating Instructions / Bedienungsanleitung /
Instructions de fonctionnement / Istruzioni per l’uso /
Instrucciones de funcionamiento / Gebruiksaanwijzing /
Návod k použití / Használati útmutató /
Betjeningsvejledning / Instrukcja obsługi /
Käyttöohjeet / Bruksanvisningar
Food Processor (Household Use)
Universal-Küchenmaschine (Hausgebrauch)
Robot de cuisine multifonction (Utilisation domestique)
Robot da cucina (Per uso domestico)
Procesador de alimentos (Para uso doméstico)
Keukenmachine (Huishoudelijk Gebruik)
Kuchyňský robot (Pro domácí použití)
Konyhai robotgép (Háztartási használatra)
Foodprocessor (til husholdningsbrug)
Robot kuchenny (Do użytku domowego)
Monitoimikone (Kotitalouskäyttöön)
Matberedare (Hushållsbruk)
Model No.
MK-F800
100_160715_MK-F800_Second_EU(UZ50E1531).indb 1 2016/07/20 17:23:47
TABLE OF CONTENTS
Page
SAFETY PRECAUTIONS ........................................................................................................................... GB3 - GB5
IMPORTANT INFORMATION .................................................................................................................................GB6
ELECTRICAL REQUIREMENT ..............................................................................................................................GB7
PART NAMES...............................................................................................................................................GB8 - GB9
SAFETY LOCK ..................................................................................................................................................... GB10
CIRCUIT BREAKER AND TEMPERATURE SENSOR PROTECTION ................................................................GB10
DISASSEMBLY & ASSEMBLY
(i) DISASSEMBLY FROM PACKAGED CONDITION .....................................................................................GB11
(ii) KNIFE BLADE • KNEADING BLADE • WHIPPING BLADE • GRATING BLADE ....................................... GB11
(iii) SLICING BLADES • SHREDDING BLADES • JULIENNE BLADE ............................................................ GB12
(iv) CITRUS PRESS .........................................................................................................................................GB12
(v) SALAD DRAINER ......................................................................................................................................GB13
FOOD PROCESSOR
(i) KNIFE BLADE ................................................................................................................................GB14 - GB16
- Preparation of Ingredients
- How to Use
(ii) SLICING BLADES • SHREDDING BLADES • JULIENNE BLADE ................................................GB17 - GB18
- Preparation of Ingredients
- How to Use
(iii) KNEADING BLADE .................................................................................................................................... GB19
- Preparation of Ingredients
- How to Use
(iv) WHIPPING BLADE ....................................................................................................................................GB20
- Preparation of Ingredients
- How to Use
(v) GRATING BLADE ......................................................................................................................................GB21
- Preparation of Ingredients
- How to Use
(vi) SALAD DRAINER ......................................................................................................................................GB22
- Preparation of Ingredients
- How to Use
(vii) CITRUS PRESS ......................................................................................................................................... GB23
- Preparation of Ingredients
- How to Use
BLENDER
(i) BLENDER ......................................................................................................................................GB24 - GB25
- Disassembly & Assembly
- Preparation of Ingredients
- How to Use
DRY MILL
(ii) DRY MILL .......................................................................................................................................GB26 - GB27
- Disassembly & Assembly
- Preparation of Ingredients
- How to Use
AFTER USE .............................................................................................................................................GB28 - GB29
TROUBLESHOOTING .............................................................................................................................GB30 - GB31
SPECIFICATIONS ................................................................................................................................................ GB33
Thank you for purchasing the Panasonic product.
• This product is intended for household use only.
• Please read these instructions carefully in order to use this product correctly and safely.
• Before using this product please give your special attention to the section “SAFETY PRECAUTIONS” (Page
GB3-GB5).
• Please keep this Operating Instructions for future use.
This symbol on the product indicates “Make sure you read the Operating Instruction carefully before
using”.
GB2
100_160715_MK-F800_Second_EU(UZ50E1531).indb 2 2016/07/20 17:23:47
English
SAFETY PRECAUTIONS (Make sure to follow these instructions)
In order to prevent accidents or injuries to the user, other people and damage to
property, please follow the instructions below.
The following indication indicates the degree of damage caused by incorrect
operation.
WARNING
CAUTION
The symbols are classied and explained as follows.
This symbol indicates prohibition.
Indicates serious injury or death.
Indicates risk of injury or property damage.
This symbol indicates requirement
that must be followed.
WARNING
Do not damage the Cord or the Plug.
(It may cause electric shock, or re caused by short circuit.)
Do not use the appliance if the Cord or the Plug is damaged or the Plug is
loosely connected to the outlet.
(It may cause electric shock, or re caused by short circuit.)
If the Cord is damaged, it must be replaced by the manufacturer, its service
center or similarly qualied persons in order to avoid a hazard.
Do not plug or unplug the Plug with wet hands.
(It may cause electric shock.)
Do not exceed outlet voltage or use an alternate current other than that
specied on the appliance.
(It may cause electric shock or re.)
• Make sure the voltage supplied to the appliance is the same as your local
supply.
• Plugging other devices into the same outlet may cause over-heating.
Do not immerse the Motor Housing in water or splash it with water.
(It may cause electric shock, or re caused by short circuit.)
Do not dismantle, repair or modify the appliance.
(It may cause re, electric shock or injury.)
Please contact your service center for repairing.
Do not insert any objects into the vent or the gap.
(It may cause electric shock or malfunction.)
• Especially metal objects such as pins or wires.
Do not replace any parts of appliance with non-genuine spare parts.
(It may cause injury, electric shock or re.)
Do not try to remove the Lid when the appliance is still operating.
(It may cause injury.)
Do not use hot water (over 60 °C) for cleaning purpose or re to dry the
appliance.
(It may cause burning or malfunction.)
GB3
100_160715_MK-F800_Second_EU(UZ50E1531).indb 3 2016/07/20 17:23:48
WARNING
Do not place hot ingredients (over 60 °C) into the Bowl or the Blender Jug.
(It may cause injury or malfunction.)
Do not operate without the Blender Lid in place correctly for the Blender
Jug.
(It may cause injury.)
Do not put your nger or utensils such as spoon, fork etc. into the Bowl or
the Blender Jug during operation.
(It may cause injury, electric shock, or re caused by short circuit.)
Do not push the Safety Pin and Safety Lever with any instruments, stick etc.
as the appliance might be on.
(It may cause injury.)
This appliance shall not be used by children.
Keep the appliance and its cord out of reach of children. Appliances can
be used by persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and if they
understand the hazards involved.
Children shall not play with the appliance.
(It may cause burning, injury or electric shock.)
Insert the Plug rmly.
(Otherwise it may cause electric shock and re caused by the heat that may
generate around the Plug.)
Clean the Plug regularly.
(A soiled Plug may cause insufcient insulation due to moisture, and may cause
re.)
When abnormal operation or breaking down occurs, discontinue the
appliance operation immediately and unplug.
(It may cause smoke, re or electric shock.)
e.g. during abnormal operation or breaking down.
• The Plug and the Cord becomes abnormally hot.
• The Cord is damaged or there has been a power failure.
• The Motor Housing is deformed or abnormally hot.
Please unplug the appliance immediately and contact the service centre for
advice or a repair.
Make sure to hold the Plug when unplugging the Plug, i.e. never pull on the
Cord.
(Otherwise it may cause electric shock, or re caused by short circuit.)
Be careful if hot liquid is poured into the Bowl or Blender Jug as it can be
ejected out of the appliance due to a sudden steaming.
(It may cause burning.)
GB4
100_160715_MK-F800_Second_EU(UZ50E1531).indb 4 2016/07/20 17:23:48
English
CAUTION
Do not leave the appliance unattended when it is in operation.
(It may cause re or burns.)
• When leaving the appliance unattended, turn the power off.
Do not use the appliance in the following places:
• Any uneven surface, on non-heat resistant carpet or table cloth etc.
(It may cause re or injury.)
• In a location where there is risk of the appliance being splashed with water, or
near a heat source.
(It may cause electric shock or current leakage.)
Do not process more than the maximum capacity marked on each container
respectively. Follow the recommended ingredient amount for processing.
(It may cause injury.)
Do not continue operation for a long time. It is recommended to rest the
appliance after a certain operating time.
(It may cause burns.)
Function
Food Processor 2 4
Blender 2 2
Dry Mill 1 2
* With exception for the stated ”Ingredient Preparations” in this Operating Instruction.
Always disconnect the appliance from the supply if it is left unattended and
before assembling, disassembling or cleaning.
(Otherwise it may cause electric shock, or re caused by current leakage.)
Remove the Bowl, the Blender Jug and the Mill Container before lift up the
Motor Housing from the table.
(It may cause injury.)
Switch off the appliance and disconnect it from power supply before
changing accessories or approaching parts that are moving during
operation.
(It may cause injury.)
When carrying the appliance, be sure to hold the Motor Housing with both
hands. Do not carry it by holding only the Bowl or Blender Jug or Mill
Container.
(It may cause injury.)
If the Blender Cutting Blade gets stuck, switch off the Blender, then unplug.
Do not insert your nger into the Blender Jug. Use a rubber spatula to
remove the ingredients that are blocking the Blender Cutting Blade.
(It may cause injury.)
Care should be taken when handling the sharp cutting blades, emptying the
Bowl or Blender Jug and cleaning. (e.g. Knife Blade, Slicing Blades and etc.)
(It may cause injury.)
Operating Time
(minutes)
Rest Time
(minutes)
GB5
100_160715_MK-F800_Second_EU(UZ50E1531).indb 5 2016/07/20 17:23:48
IMPORTANT INFORMATION
Do not place the appliance in the following places.
• In a location where the appliance being expose to excessive moisture, temperature or
direct sunlight.
(It may cause malfunction.)
• Any high or low temperature location such as fridge, freezer, microwave or oven.
(It may cause malfunction or breakage.)
Do not process hard ingredients (e.g. hard meat, meat with bones) or viscous
material.
(It may cause malfunction.)
Prohibited Ingredients:
Attachments Description
Knife Blade Hard ingredients, viscous ingredients, e.g. coffee beans, dried
soyabeans, frozen food, dried squid, and etc.
Slicing Blades,
Shredding Blades
and Julienne
Blade
Kneading Blade Ingredients not suited for dough making, e.g. meat, vegetables,
Whipping Blade Any other ingredients aside from egg whites and fresh cream.
Grating Blade Viscous ingredients, ingredients with high hard ber concentrations,
Salad Drainer Large chunky ingredients, ingredients that are soft and fragile, e.g.
Citrus Press Any other ingredients aside from citrus fruits, e.g. apple, kiwi and
Blender Hard ingredients, highly sticky ingredients, ingredients with low
Dry Mill Hard nuts, dried fruit, ingredients with high hard ber concentration,
Ingredients with high hard ber concentrations, viscous ingredients,
ingredients that are too soft, e.g. hard vegetables, frozen food, ham,
turmeric, ginger, lettuce, tomato, peach, chocolate and etc.
nuts, sauces, spreads.
ingredients that are too small and thin, e.g. yam, celery, leek, pine
nuts, and etc.
large carrot or potato chunks, tomato, tofu, pasta, noodle, and etc.
etc.
water content, e.g. turmeric, dried soyabeans, frozen food, meat,
sh, boiled potatoes, or just ice cubes.
moist ingredients, liquids, e.g. various nuts, raisins, meat,
vegetables, boiled egg, turmeric, and etc.
Before Use:
Always operate the appliance on a clean, dry, at, hard and smooth surface, and clean
the Rubber Foot (P.GB8) before use to ensure that the Rubber Foot suction is at optimum
performance.
GB6
100_160715_MK-F800_Second_EU(UZ50E1531).indb 6 2016/07/20 17:23:48
English
Electrical Requirement (For UK market only)
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and
convenience. A 13-amp fuse is tted in this plug. Should the fuse need to be replaced
please ensure that the replacement fuse has a rating of 13-amp and that it is approved by
ASTA or BSI to BS1362.
Check for the ASTA mark
or the BSI mark on the body of the fuse. If the plug
contains a removable fuse cover, you must ensure that it is retted when the fuse is
replaced. If you lose the fuse cover, the plug must not be used until a replacement cover
is obtained.
A replacement fuse cover can be purchased from your local Panasonic Dealer.
If the tted moulded plug is unsuitable for the socket outlet in your home, then the fuse
should be removed and the plug cut off and disposed of safety.
There is a danger of severe electrical shock if the cut off plug is inserted into any 13-amp
socket.
How to replace the fuse
The location of the fuse differs according to the
type of AC mains plug (gures A and B).
Conrm the AC mains plug tted and follow the
instructions below.
Illustrations may differ from actual AC mains plug.
Open the fuse cover with a screwdriver and
replace the fuse and close or attach the fuse cover.
Figure A
Figure B
Fuse cover
GB7
100_160715_MK-F800_Second_EU(UZ50E1531).indb 7 2016/07/20 17:23:48
PART NAMES
Food Processor
Working capacity: 1.5 L
1. Food Pusher
2. Feeding Tube
3. Bowl Lid
4. Knife Blade
5. Grating Blade
6. Kneading Blade
7. Whipping Blade
8. Drainer Cover
9. Salad Drainer
10. Blade Stand
11. Fine Shredding Blade
12. Coarse Shredding Blade
*The shape of the Plug may vary from illustration.
GB8
13. Thin Slicing Blade
14. Thick Slicing Blade
15. Julienne Blade
16. Citrus Cone
17. Citrus Strainer
18. Bowl
19. Drive Shaft
20. Motor Housing
21. Power Switch
22. Rubber Foot
23. Cord
24. *Plug
100_160715_MK-F800_Second_EU(UZ50E1531).indb 8 2016/07/20 17:23:48
English
PART NAMES
Blender, Dry Mill & Accessories
Working
capacity: 1 L
1. Blender Lid
2. Blender Jug
3. Blender Cutting Blade
6. Mill Container Base
7. Storage Case Unit
8. Brush
4. Mill Container
5. Mill Cutting Blade
Control Panel
Mode Selection
- Auto Menu -
Mince Mode
Chop Mode
Frozen Mode
Mode Indication L.E.D.
Stop/Start Switch
For Auto Menu: to Pause/Start process
For Manual Menu: to Stop/Start process
Paste Mode
Drainer Mode
- Manual Menu -
PULSE Switch
Rotary Dial
Adjust Speed and Timer/Driving Time
Continuous Mode
Intermittent Mode
Speed and Timer/Driving Time indication L.E.D.
: Light up when Manual Menu is operating and indicate speed level by bars.
: Light up when Auto Menu is processing and indicate Timer/Driving time by bars.
Note:
• The program will time-out and reset itself after 10 seconds if no further action is done after a function is
selected.
• Turning the Rotary Dial clockwise will increase the number of lighted bars and vice versa.
• The default speed for the Continuous and Intermittent modes are at maximum, (level 10).
• The program will time-out and reset itself after 20 seconds if the program is paused during processing and no
further action is done.
• Continuous Mode will stop automatically approximately 19 minutes and Intermittent Mode will stop
automatically approximately 7 minutes after processing is started.
GB9
100_160715_MK-F800_Second_EU(UZ50E1531).indb 9 2016/07/20 17:23:50
SAFETY LOCK
The Safety Pin is designed to prevent the appliance from switching on when
- The Bowl Lid or Citrus Strainer and the Bowl are not fully locked to each other.
- The Bowl, Blender Jug or Dry Mill are not fully locked to the Motor Housing.
Fully locking steps:
For Bowl and Blender Jug, align the
triangle mark with the Motor Housing as
shown in position . Turn it clockwise
until a ‘click’ sound is heard and the
triangular mark now aligns to position .
For Dry Mill, place onto Motor Housing
and turn clockwise until a ‘click’ sound is
heard. To unlock, follow the locking steps
Safety Pins
in reverse.
The Safety Lever only
activates the Safety Pin if the
Bowl Lid or Citrus Strainer is
secured on the Bowl.
Position A : Unlock
Position B : Lock
Note:
• Do not push the Safety Pin and Safety Lever with any instrument, stick etc.
• Do not pour liquids or ingredient at the Safety Pin and Safety Lever area.
• Keep the Safety Pin and Safety Lever area clean to avoid foreign particles accumulate on the area.
Actions above will ensure the Safety Pin and Safety Lever function properly. If not followed, it will
damage the parts related to the Safety Pin and Safety Lever.
CIRCUIT BREAKER AND TEMPERATURE SENSOR PROTECTION
This appliance has the Circuit Breaker and Temperature sensor functions to stop the motor when motor is
overloaded.
(refer to page GB32)
GB10
100_160715_MK-F800_Second_EU(UZ50E1531).indb 10 2016/07/20 17:23:50
English
FOOD PROCESSOR -DISASSEMBLY & ASSEMBLY-
Disassembly from Packaged Condition
1
2
Top of the
Knife Blade
Rotate the Bowl Lid anticlockwise and lift up from the
Bowl.
Note:
Beware of the sharp edges of the Knife Blade when removing it from the Bowl.
Assembly of Food Processor Attachments
It is highly recommended to clean all attachments and accessories and dry well before using the appliance for the
rst time, refer to page GB28 and GB29 for the cleaning method. Unplug when assembling the unit. Before plugging
in, ensure that the Power Switch is switched off. Please refer to page GB29 under ‘Storing’ on how to re-position the
Motor Housing.
Knife Blade · Kneading Blade · Whipping Blade · Grating Blade
1 2
Hold the top of the Knife Blade and lift up to remove
from Bowl.
or
or
or
Place the Knife Blade (Kneading Blade or Whipping
Blade or Grating Blade) into the Bowl.
Note:
For the Knife Blade, ensure that the Drive
Shaft is protruding from the Knife Blade
after insertion.
Put the ingredients into the Bowl.
Note:
For the Grating Blade, place the ingredients on top of
the blade and spread them out evenly.
Place the Bowl Lid on top of the Bowl and turn it
clockwise until a ‘click’ sound is heard. Insert the Food
Pusher into the Feeding Tube.
GB11
100_160715_MK-F800_Second_EU(UZ50E1531).indb 11 2016/07/20 17:23:50
FOOD PROCESSOR -DISASSEMBLY & ASSEMBLY-
Assembly of Food Processor Attachments
Slicing Blades (Thick / Thin) · Shredding Blades (Coarse / Fine) · Julienne Blade
1 2
Projected Detent
Fit the projected detent of the desired blade onto the
Blade Stand and ensure it is seated properly.
Note:
• Beware of the sharp edges on the blades while inserting into the Blade Stand.
• To remove the blade, turn over the Blade Stand and push down on the reverse side of the dimple on the blade.
3 4
Push down on the dimple on the blade as seen above
until a ‘snap’ sound is heard.
Finger Holes
Insert nger and thumb into the nger holes to grip the
Blade Stand. Place the assembled Blade Stand into the
Bowl.
Note:
Ensure that the Drive Shaft is
protruding from the Blade Stand after
insertion.
Citrus Press
1 2
Place the Citrus Strainer onto the Bowl. Turn it
clockwise until a ‘click’ sound is heard.
Place the Bowl Lid on top of the Bowl and turn it
clockwise until a ‘click’ sound is heard.
Attach the Citrus Cone onto the Drive Shaft.
GB12
100_160715_MK-F800_Second_EU(UZ50E1531).indb 12 2016/07/20 17:23:51
English
FOOD PROCESSOR -DISASSEMBLY & ASSEMBLY-
Assembly of Food Processor Attachments
Salad Drainer
1 2
Place the Salad Drainer into the Bowl. Insert the
ingredients into the Salad Drainer.
3 4
A
PP
B
PP
Place Drainer Cover on top of the Salad Drainer until
the mark aligns as shown in A. Turn the Drainer Cover
anticlockwise until the mark aligns as shown in B.
Ensure that the Drive Shaft is protruding out of the
Salad Drainer after insertion.
Attaching the assembled units to the Motor Housing
To disassemble, follow the assembly steps in reverse.
Place the Bowl Lid on top of the Bowl and turn it
clockwise until a ‘click’ sound is heard.
1. Place the Bowl on top of the Motor Housing until the
mark aligns as shown in .
2. Turn the Bowl clockwise until a ‘click’ sound is heard.
Ensure that the triangle mark on the Bowl is aligned
with the rectangle mark on the Motor Housing as
seen in .
GB13
100_160715_MK-F800_Second_EU(UZ50E1531).indb 13 2016/07/20 17:23:51
FOOD PROCESSOR -KNIFE BLADE-
Ingredient Preparations
Function Ingredient Mode Quantity Operating Time (approx.) Preparation Method
50 ~ 400 g 5 ~ 40 sec
Initial setting is for 200 g (10 sec)
Remove all skin, bones, and
tendons, cut into 2 ~ 3 cm cubes.
Mince
Meat
Fish 50 ~ 500 g 3 ~ 30 sec
Auto
Onion
Garlic
Chop
Crush
Mash
Frozen
Ice Crush Ice Cubes
Carrot 50 ~ 450 g 10 ~ 30 sec
Italian
Parsley
Mushroom 30 ~ 250 g 3 ~ 15 sec
Parmesan
Cheese
Boiled
Potato
Frozen
Banana
Auto
Continuous
Speed: Max
Continuous
Speed: Max
Intermittent
Speed: Max
Auto
Continuous
Speed: Max
150 ~ 500 g 10 ~ 50 sec
Initial setting is for 300 g (20 sec)
5 ~ 500 g 10 ~ 30 sec
5 ~ 70 g 10 ~ 40 sec
10 ~ 200 g 10 ~ 60 sec
100 ~ 400 g 10 ~ 40 sec
250 ~ 450 g 40 ~ 120 sec
Initial setting is for 350 g (60 sec)
~ 10 pcs ~ 20 sec
Peel skin, cut into 2 ~ 3 cm
cubes.
Peel skin.
Peel skin, cut into 2 ~ 3 cm
cubes.
Remove stalk.
Cut into 2 ~ 3 cm cubes.
Cut into 2 ~ 3 cm cubes.
Cut into 2 ~ 3 cm cubes.
Do not over process.
1 ~ 2 cm width, half frozen
condition, i.e. toothpick can
pierce.
2 ~ 3 cm ice cubes.
Grind Peanuts
Paste
Crumb
Knead
(for
confectionary)
Juice Make
Soup Make
GB14
Roasted
Peanuts
Soft White
Bread
Flour
Fruit, Liquid
etc.
Boiled
Vegetable,
Liquid etc.
Continuous
Speed: Max
Auto
Continuous
Speed: Max
Continuous
Speed: Max
Continuous
Speed: Max
Continuous
Speed: Max
10 ~ 200 g 15 ~ 30 sec
100 ~ 400 g 4 ~ 10 min
Initial setting is for 300 g (7 min)
10 ~ 200 g 15 ~ 60 sec
~ 300 g ~ 120 sec
~ 1,500 mL ~ 120 sec
~ 1,500 mL ~ 120 sec
Remove peanut shell and skin.
Remove peanut shell and skin.
Slice soft bread into 6 to 8
pieces.
Use for making confectionery
such as sweets and cakes.
Cut into 2 ~ 3 cm cubes. Process
solids rst. Fill liquid till total not
exceeding 1,500 mL. Do not add
more than 10 pcs of ice cubes
during processing.
Cut into 2 ~ 3 cm cubes. Process
solids rst. Fill liquid till total not
exceeding 1,500 mL.
100_160715_MK-F800_Second_EU(UZ50E1531).indb 14 2016/07/20 17:23:54
English
FOOD PROCESSOR -KNIFE BLADE-
Operating with Auto Menu
21
After completing the assembly steps, plug-in the plug
into the socket and turn on the Power Switch. The Mode
Indication L.E.D.s will light up and blink.
3 4
Each Auto Menu has a pre-programmed driving time.
Each lighted bar represents 10 seconds* of driving time.
Push the Stop/Start Switch to start the operation.
5 6
Select the required Auto Menu mode (except the
Drainer Mode). The selected Mode Indication L.E.D. will
light up and a beep sound will be heard. The Driving
Time and Stop/Start Switch Indication L.E.D. will light up
and blink.
During operation, the Driving Time L.E.D. will turn off
one by one after every 10 second intervals until the set
duration is completed and 4 beep sounds will be heard.
The Mode Indication L.E.D.s will light up and blink.
After the processing is completed, switch off the Power
Switch and unplug from the socket.
* For Paste Auto Menu, each lighted bar represents 1 minute. The lighted bar will decrease at every 1 minute
interval.
Note:
• Always ensure that the Knife Blade is inserted before adding ingredients into the Bowl.
• The Driving Time of the Auto Menu can be increased or decreased by adjusting the Rotary Dial if necessary.
• The operation of the Auto Menu can be stopped prematurely by pushing the Stop/Start Switch before the set
duration ends.
• Depending on the speed and amount of ingredients used, there will be signicant vibrations present. In that
case, hold down the Bowl Lid with both hands to support it during its operation.
100_160715_MK-F800_Second_EU(UZ50E1531).indb 15 2016/07/20 17:23:54
Remove the Knife Blade from the Bowl before removing
the processed ingredients.
GB15
FOOD PROCESSOR -KNIFE BLADE-
Operating with Manual Menu
1 2
After completing the assembly steps, plug-in the plug
into the socket and turn on the Power Switch. The Mode
Indication L.E.D.s will light up and blink.
3 4
Adjust the desired speed with the Rotary Dial. The more
bars are lighted, the higher the speed. Push the Stop/
Start or PULSE Switch to start the operation.
5 6
Select the Continuous or Intermittent mode. The
selected Mode Indication L.E.D. will light up and a beep
sound will be heard. The Speed, Stop/Start Switch and
PULSE Switch Indication L.E.D. will light up and blink.
During the driving operation, the Stop/Start Indication
L.E.D. will remain lit. The speed can be adjusted during
operation. Push the Stop/Start Switch to stop the driving
operation.
After the processing is completed, switch off the Power
Switch and unplug from the socket.
Note:
• Always ensure that the Knife Blade is inserted before adding ingredients into the Bowl.
• Do not exceed the stated amount of ingredients for kneading as abnormal vibration may occur.
• Do not insert hot ingredients into the Bowl for processing. Always ensure that the ingredients are sufciently
cooled before inserting, e.g. boiled potato.
• For Juice Make, ll in the solid ingredients rst into the Bowl, followed by the liquid ingredients until the total
volume does not exceed 1,500 mL.
• Depending on the speed and amount of ingredients used, there will be signicant vibrations present. In that
case, hold down on the Bowl Lid to support it during its operation.
• For kneading, do not reprocess after the dough has formed the rst time.
• When process the liquid ingredients together with ice cubes, put the ice cubes not more than 10 pcs (approx.
170 g).
GB16
100_160715_MK-F800_Second_EU(UZ50E1531).indb 16 2016/07/20 17:23:54
Remove the Knife Blade from the Bowl before removing
the processed ingredients.
English
FOOD PROCESSOR
-SLICING BLADES • SHREDDING BLADES • JULIENNE BLADE-
Slicing Blades (Thick / Thin)
- used for slicing ingredients
Shredding Blades (Coarse / Fine)
- used for shredding and grating
ingredients.
Ingredient Preparations for Slicing Blades (Thick / Thin)
Function Ingredient Mode
Cucumber
Onion
Slice
Carrot 600 g
Potato 600 g
Cabbage 400 g
Continuous
Speed: Max
Max
Single Use
700 g
700 g
Operating Time (approx.) Preparation Method
-
Ingredient Preparations for Shredding Blades (Coarse / Fine)
Function Ingredient Mode
Max
Single Use
Operating Time (approx.) Preparation Method
Julienne Blade
- used for making french fries and
shredding ingredients.
Cut ingredient till it is small
enough to t into the Feeding
Tube.
Shred
Cucumber
Carrot 500 g
Potato 650 g
Cheese 500 g
Continuous
Speed: Max
500 g
Ingredient Preparations for Julienne Blade
Function Ingredient Mode
French Fry Potato
Shred Cabbage 500 g
Continuous
Speed: Max
Max
Single Use
800 g
Cut ingredient till it is small
enough to t into the Feeding
Tube.
-
Cut ingredient till it is small
enough to t into the Feeding
Tube. Do not use hard
ingredients such as Parmesan.
Operating Time (approx.) Preparation Method
Cut ingredient till it is small
-
enough to t into the Feeding
Tube.
GB17
100_160715_MK-F800_Second_EU(UZ50E1531).indb 17 2016/07/20 17:23:56
FOOD PROCESSOR
Operating with Manual Menu
1 2
-SLICING BLADES • SHREDDING BLADES • JULIENNE BLADE-
After completing the assembly steps, plug-in the plug
into the socket and turn on the Power Switch. The Mode
Indication L.E.D.s will light up and blink.
3
Adjust the speed with the Rotary Dial. The more bars
are lighted, the higher the speed. Push the Stop/Start
Switch or PULSE Switch to start the operation.
5 6
Select the Continuous mode. The selected Mode
Indication L.E.D. will light up and a beep sound will
be heard. The Speed, Stop/Start and PULSE Switch
Indication L.E.D. will light up and blink.
4
Insert the ingredients into the Feeding Tube and push
down with the Food Pusher.
During the driving operation, the Stop/Start Indication
L.E.D. will remain lit. Push the Stop/Start Switch to stop
the driving operation. After the processing is completed,
switch off the Power Switch and unplug from the socket.
Note:
• When using long and narrow ingredients, place
it against the front wall of the Feeding Tube as
indicated in Figure 1, for support while in operation
to avoid uneven processing.
• Dispose of any remaining lumps of unprocessed
ingredients.
• Align high bre ingredients as indicated in Figure 2
for a consistent processing result.
GB18
100_160715_MK-F800_Second_EU(UZ50E1531).indb 18 2016/07/20 17:23:56
Remove the Blade Stand from the Bowl before
removing the processed ingredients.
Front
Wall
Figure 1 Figure 2
FOOD PROCESSOR -KNEADING BLADE-
Ingredient Preparations for Kneading Blade
Function Ingredient Mode
Bread Flour
Knead
(for bread)
Liquid
Continuous
Speed: Start
with level 1,
increase
every 1
second till
Max.
Max
Single Use
300 g
160 ~ 200 mL
Operating Time (approx.) Preparation Method
Operating with Manual Menu
After completing the assembly steps, plug-in the plug
into the socket and turn on the Power Switch. The Mode
Indication L.E.D.s will light up and blink.
Mix yeast with water and add during the
processing of dough (adding yeast directly
before processing may result in aking and
premature rising). If dough mix still appears
~ 120 sec
aky after initial processing, add 1 tsp of water
into the mix. When large vibrations occur due
to dough mix wrapping around the Drive Shaft,
add 1 tbsp of our. Do not reprocess the dough
after the process is complete, if the dough is
not satisfactory, knead by hand.
21
Select the Continuous mode and adjust to the
appropriate speed with the Rotary Dial. The more bars
are lighted, the higher the speed. Push the Stop/Start
Switch to start the operation.
English
43
During the driving operation, the Stop/Start Indication
L.E.D. will remain lit. Observe the formation of the
dough ball. Push the Stop/Start Switch to stop the
After the processing is completed, switch off the Power
Switch and unplug from the socket. Remove the dough
ball from the Bowl before removing the Kneading Blade.
driving operation once a rm dough ball is formed.
Note:
• Do not exceed the stated amount of ingredients for the Kneading Blade as abnormal vibration may occur.
• Depending on the speed and amount of ingredients used, there will be signi cant vibrations present. In that
case, hold down the Bowl Lid with both hands to support it during its operation.
• For kneading, do not reprocess after the dough has formed the rst time.
• High amounts of butter and sugar in the dough may cause abnormal vibration when using the Kneading Blade.
• Using our other than bread our may cause abnormal vibration. Before processing, remove 1 ~ 2 tbsp of
water from the total amount stated and add the water little by little during processing if necessary.
GB19
100_160715_MK-F800_Second_EU(UZ50E1531).indb 19 2016/07/20 17:23:57
FOOD PROCESSOR -WHIPPING BLADE-
Ingredient Preparations for Whipping Blade
Function Ingredient Mode
Egg White
Whip
Cream
Continuous
Speed: Max
Max
Single Use
2 ~ 6 pcs 50 ~ 90 sec
100 ~ 300 mL
Operating Time (approx.) Preparation Method
15 sec ~ 2 min
Operating with Manual Menu
After completing the assembly steps, plug-in the plug
into the socket and turn on the Power Switch. The Mode
Indication L.E.D.s will light up and blink.
Separate the egg white from the
yolk for a smooth meringue.
Use fresh cream of fat content
35% or higher at 5 °C.
21
Select the Continuous mode and adjust the speed with
the Rotary Dial. The more bars are lighted, the higher
the speed. Push the Stop/Start Switch to start the
operation.
43
During the driving operation, the Stop/Start Indication
L.E.D. will remain lit. Observe the rising and formation
of the whipped ingredients. Push the Stop/Start Switch
to stop the driving operation once a desired texture is
After the processing is completed, switch off the Power
Switch and unplug from the socket. Carefully remove
the Whipping Blade together with the processed
ingredients from the Bowl.
formed.
Note:
• Do not over process the whipping cream, it may break down to form clumps of butter.
• Using different brands of whipping cream will have varying results. It is recommended to process until the
cream is sufciently whipped.
GB20
100_160715_MK-F800_Second_EU(UZ50E1531).indb 20 2016/07/20 17:23:57
English
FOOD PROCESSOR -GRATING BLADE-
Ingredient Preparations for Grating Blade
Function Ingredient Mode
Carrot
Grate
Apple
Cucumber
Continuous
Speed: Max
Max
Single Use
200 g
200 g
200 g
Operating Time (approx.) Preparation Method
Operating with Manual Menu
1
After completing the assembly steps, plug-in the plug
into the socket and turn on the Power Switch. The Mode
Indication L.E.D.s will light up and blink.
-
2
Select the Continuous mode and adjust the speed with
the Rotary Dial. The more bars are lighted, the higher
the speed. Push the Stop/Start Switch to start the
operation.
Cut into 2 ~ 3 cm cubes.
43
During the driving operation, the Stop/Start Indication
L.E.D. will remain lit. Push the Stop/Start Switch to stop
the driving operation.
After the processing is completed, switch off the Power
Switch and unplug from the socket. Remove the Grating
Blade from the Bowl before removing the ingredients.
Note:
• Do not insert the ingredients through the Feeding Tube during operation of the Grating Blade.
GB21
100_160715_MK-F800_Second_EU(UZ50E1531).indb 21 2016/07/20 17:23:58
FOOD PROCESSOR -SALAD DRAINER-
Ingredient Preparations for Salad Drainer
Function Ingredient Mode
Lettuce
Drainer
Leaves
Auto
Cabbage
Max
Single Use
100 g 20 ~ 60 sec
Initial setting is for 50 g (20 sec)
200 g 20 ~ 70 sec
Operating Time (approx.) Preparation Method
Operating with Auto Menu
After completing the assembly steps, plug-in the plug
into the socket and turn on the Power Switch. The Mode
Indication L.E.D.s will light up and blink.
Cut into 3 ~ 5 cm slices.
Shredded into 1 ~ 3 mm.
21
Select the Drainer mode. The selected Mode Indication
L.E.D. will light up and a beep sound will be heard. The
Driving Time and Stop/Start Switch Indication L.E.D. will
light up and blink.
43
Each Auto Menu has a pre-programmed driving time.
Each lighted bar represents 10 seconds of driving time.
Push the Stop/Start Switch to start the operation.During
After the processing is completed, switch off the Power
Switch and unplug from the socket. Remove the Salad
Drainer from the Bowl.
operation, the Driving Time L.E.D. will turn off one by
one after every 10 second intervals until the set duration
is completed and 4 beep sounds will be heard. The
Mode Indication L.E.D.s will light up and blink.
Note:
• Maximum working capacity of the Salad Drainer: 200 g or till maximum height of Salad Drainer, whichever
comes rst.
• Prohibited ingredients: refer to page GB6.
• Ensure that the ingredients are spread evenly around the Salad Drainer before processing.
• Do not operate the Salad Drainer in any other mode except Drainer mode.
• Always ensure that the Drainer Cover is attached onto the Salad Drainer before operation, otherwise the
ingredients might come out and tear around the Bowl.
• Depending on the amount of ingredients used, there will be signicant vibrations present. In that case, hold
down the Bowl Lid with both hands to support it during its operation.
GB22
100_160715_MK-F800_Second_EU(UZ50E1531).indb 22 2016/07/20 17:23:59
FOOD PROCESSOR -CITRUS PRESS-
Ingredient Preparations for Citrus Press
Function Ingredient Mode
Squeeze Citrus Fruit
Continuous
Speed:
Level 4
Max
Single Use
1000 mL -
Operating Time (approx.) Preparation Method
Operating with Manual Menu
After completing the assembly steps, plug-in the plug
into the socket and turn on the Power Switch. The Mode
Indication L.E.D.s will light up and blink.
3
English
Cut fruit into halves.
21
Select the Continuous mode and adjust to level 4 with
the Rotary Dial. Push the Stop/Start Switch to start the
operation.
4
Place the half cut fruit with the cut side on top of the
Citrus Cone and press down rmly to extract juice.
During the driving operation, the Stop/Start Indication
L.E.D. will remain lit. Push the Stop/Start Switch to stop
After the processing is completed, switch off the Power
Switch and unplug from the socket. Remove the Citrus
Press attachment from the Bowl before pouring the
extracted juice out.
the driving operation.
Note:
• Always ensure that the Citrus Cone is placed onto the Citrus Strainer before usage.
• Stop the processing periodically to remove the pulp remaining on the Citrus Strainer to ease the juice
extraction process.
• It is not recommended to operate the Citrus Press at speed levels higher than level 4.
• Avoid touching the Citrus Cone while it is turning.
GB23
100_160715_MK-F800_Second_EU(UZ50E1531).indb 23 2016/07/20 17:23:59
BLENDER
Assembly and Disassembly of Blender Attachment
1 2
Insert ingredients into the Blender Jug and close with
the Blender Lid.
Place the Blender Jug on top of the Motor Housing until
the mark aligns as shown in .
Turn the Blender Jug clockwise until a ‘click’ sound is
heard. Ensure that the triangle mark on the Blender Jug
is aligned with the rectangle mark on the Motor Housing
as seen in .
To disassemble, simply follow the assembly steps in reverse.
Ingredient Preparations for Blender
Function Ingredient Mode
Liquidize
Fruit,
Vegetable
Continuous
Speed: Max
Max
Single Use
1,000 mL ~ 2 min
Operating Time (approx.) Preparation Method
Cut into 1 cm cubes.
Note:
• Maximum working capacity: 1 L.
• Prohibited ingredients for Blender Jug: refer to page GB6.
• It is not recommended to blend hard and viscous ingredients. However, if necessary, cut the hard ingredients
into small pieces (eg. cut carrot into 1 cm³ cubes) and ll the Blender Jug with the ingredients not exceeding
half its rated capacity.
• Do not ll exceeding the maximum level and reduce ingredients when appliance makes abnormal sound or
vibration during operation.
• Add in soft ingredients (fruits, vegetables) into the Blender Jug before adding in other ingredients.
GB24
100_160715_MK-F800_Second_EU(UZ50E1531).indb 24 2016/07/20 17:24:00
BLENDER
Operating with Manual Menu
1 2
After completing the assembly steps, plug-in the plug
into the socket and turn on the Power Switch. The Mode
Indication L.E.D.s will light up and blink.
3 4
3
During the driving operation, the Stop/Start Indication
L.E.D. will remain lit. Push the Stop/Start Switch to stop
the driving operation.
Select the Continuous mode and adjust the speed with
the Rotary Dial. The more bars are lighted, the higher
the speed. Push the Stop/Start Switch to start the
operation.
After the processing is completed, switch off the Power
Switch and unplug from the socket. Remove the
Blender Unit from the Motor Housing and proceed to
remove the ingredients.
English
Note:
• If the Cutting Blade gets stuck, switch off immediately and unplug. Do not attempt to proceed to unstuck the
ingredients with your ngers, use an object like a rubber spatula instead.
• During blending, there is a possibility that the ingredients will splash out of the Blender Lid hole. In the event
that it splashes out, wipe it off with a dry cloth.
• Do not operate exceeding the rated operation duration (2 min ON, 2 min OFF).
GB25
100_160715_MK-F800_Second_EU(UZ50E1531).indb 25 2016/07/20 17:24:00
DRY MILL
Disassembly from Packaged Condition
1 2
Maximum Level
Maximum Level for
Dry Ingredients
Turn the Mill Container Base anticlockwise to unlock
and lift up from the Mill Container.
A maximum level for dry ingredients is indicated on the
Mill Container. Do not ll exceeding this level.
Assembly and Disassembly of Dry Mill Attachment
1 2
Turn the Mill Container upside down and ll in the
ingredients without exceeding the maximum level
indicated.
Place the Dry Mill Unit on top of the Motor Housing.
Turn the Dry Mill Unit clockwise until a ‘click’ sound is
heard.
Place the Mill Container Base into the Mill Container
and turn it clockwise until a ‘click’ sound is heard.
Make sure the ribs on outer surface of the Mill container
base and inner surface of the Mill container are hooked
rmly.
To disassemble, simply follow the assembly steps in reverse.
Ingredient Preparations for Dry Mill
Function Ingredient Mode
Coffee Bean
Grind
Pepper
Continuous
Speed: Max
Max
Single Use
Till
Max Level
Operating Time (approx.) Preparation Method
~ 60 sec
-
Note:
• Prohibited ingredients: refer to page GB6.
• Do not operate the unit with empty Dry Mill.
• Do not ll exceeding the maximum level and reduce ingredients when the appliance makes an abnormal sound
or vibrates during operation.
GB26
100_160715_MK-F800_Second_EU(UZ50E1531).indb 26 2016/07/20 17:24:00
English
DRY MILL
Operating with Manual Menu
1 2
After completing the assembly steps, plug-in the plug
into the socket and turn on the Power Switch. The Mode
Indication L.E.D.s will light up and blink.
3 4
3
During the driving operation, the Stop/Start Indication
L.E.D. will remain lit. Push the Stop/Start Switch to stop
the driving operation.
Note:
• While removing the ingredients, be careful of the Cutting Blade.
• Do not operate exceeding the rated operation duration (1 min ON, 2 min OFF).
Select the Continuous mode and adjust the speed with
the Rotary Dial. The more bars are lighted, the higher
the speed. Push the Stop/Start Switch to start the
operation.
After the processing is completed, switch off the Power
Switch and unplug from the socket. Remove the Dry Mill
Unit from the Motor Housing and proceed to remove the
ingredients.
GB27
100_160715_MK-F800_Second_EU(UZ50E1531).indb 27 2016/07/20 17:24:01
AFTER USE
Cleaning
Pre-wash
The pre-wash enables easier cleaning. It can be used for the Knife Blade and Blender Unit. To pre-wash, simply
follow the steps below.
1
Put the used attachment inside the Bowl, ll the Bowl
with water until the attachment is submerged in water
(max. 500 mL). Place the Bowl Lid on top of the Bowl
and turn it clockwise until a ‘click’ sound is heard.
2 3
Food Processor: Select the Intermittent mode, push the
Stop/Start Switch and operate for 10 ~ 20 seconds at
level 10.
Blender: Select the Continuous mode, push the Stop/
Start Switch and operate for 10 ~ 20 seconds at level
10.
BlenderFood Processor
For the Blender Unit, ll 500 mL of water into the
Blender Jug and cover with the Blender Lid. Plug-in the
plug into the socket and turn on the Power Switch.
Push the Stop/Start Switch to stop the driving operation.
Switch off the Power Switch and unplug from the
socket.
Remove the attachments and proceed for cleaning.
Wash these items by rinsing them under running water. Use neutral kitchen detergent if necessary. Proceed to
wipe them dry with a clean cloth.
Wash these items by rinsing them under running water, and clean carefully with Brush.
Use neutral kitchen detergent if necessary.
Note:
• These items are extremely sharp and should be handled with extra care while cleaning.
Avoid hitting these items on hard objects during the cleaning process.
• The Mill Container Base must not be washed, use Brush to clean.
GB28
100_160715_MK-F800_Second_EU(UZ50E1531).indb 28 2016/07/20 17:24:02
English
AFTER USE
Motor Housing / Rubber Foot
Wipe off any dirt or stains with a clean damp cloth.
Note:
• Ensure that the power cord is unplugged before cleaning the Motor Housing.
• Do not wash the Motor Housing under running water.
• Never use corrosive liquids (e.g. alcohol, thinner, etc) to clean the Motor Housing.
Cleaning with a Dishwasher
The Bowl and Bowl Lid of this appliance are dishwasher safe.
Note:
• Do not place these items near the dishwasher heater area as high temperatures may damage the parts.
Storing
Ensure all attachments and the Bowl are removed from the Motor Housing prior to storage.
1 2
To release the Rubber Foot suction of the Motor
Housing, press on the release lever located at the
bottom side of the Motor Housing at the same time as
seen in the above picture and lift up.
3
(i)
Release Lever
(ii) (iii)
Tilt the Motor Housing on its side, and proceed to wind
up the Power Cord around the Cord Winding Area
partially, leaving the Plug at the sides.
(i) Store the Knife Blade inside
the Bowl. The Storage Case
Unit is included to store the
other attachments. Store the
attachments in place as per
packaging condition.
100_160715_MK-F800_Second_EU(UZ50E1531).indb 29 2016/07/20 17:24:02
(ii) List of attachments in Storage
Case Unit: Kneading Blade,
Citrus Cone, Thick Slicing
Blade, Thin Slicing Blade,
Fine Shredding Blade, Coarse
Shredding Blade, Julienne Blade,
Blade Stand, Grating Blade,
Whipping Blade and Brush.
(iii) Place the Storage Case Lid
beneath the Storage Case to
collect the drained water from
the washed attachments
Note:
• Dispose of the exible plastic
cover after opening the Storage
Case.
GB29
TROUBLESHOOTING
Please check the following points before arranging for service.
Problem Cause and Action
The plug is loose in the outlet.
The appliance does not turn on.
None of the Control Panel
Functions can be selected.
The appliance does not start even
the Stop/Start Switch is pressed.
(Error Mode is indicated)
Plug in rmly into the outlet.
The Power Switch has not been
Turn on the Power Switch.
Gloves may cause insensitivity of the Control Panel.
Select the functions with bare ngers.
Pressing the function at the wrong position.
Press rmly on the illustration on the Control Panel.
The appliance is already operating.
The functions cannot be changed when the appliance is
operating. Stop the previous function before selecting a new
one.
The Bowl, Blender Unit or Dry Mill Unit is not properly locked
onto the Motor Housing.
Ensure that the triangle mark on the attachments are
aligned with the rectangular mark on the Motor Housing as
seen in page GB10.
The Bowl Lid or Citrus Strainer is not fully locked onto the
Bowl.
Fully secure the Bowl Lid or Citrus Strainer onto the Bowl.
The appliance does not operate
even when the function is started.
(No Error Mode)
The selected function is canceled.
(The Mode Indication L.E.D. starts
blinking).
The appliance suddenly stops
during operation.
The ingredients are jammed.
Remove the ingredients carefully and ensure that the
amount used is as stated.
The appliance was left idle for more than 10 seconds after
selecting the function.
Ensure that action is done after selecting the function within
10 seconds.
The circuit breaker protection is activated. (Refer to page GB10)
• Too much ingredients were inserted.
Remove the excess ingredients and ensure that the amount
used is as stated.
• Large chunks or hard ingredients were used.
Ensure that the ingredients are cut into the stated sizes.
Do not use hard ingredients such as frozen foods or highly
dense solids.
The safety lock was triggered. (Refer to page GB10)
• Abnormal vibration during operation may offset the safety
lock engagement.
Ensure that the ingredients used and the amount are as
stated.
Lock the Bowl Lid or Citrus Strainer onto the Bowl rmly,
and ensure that the Bowl, Blender Unit, or Dry Mill Unit is
locked rmly onto the Motor Housing.
GB30
100_160715_MK-F800_Second_EU(UZ50E1531).indb 30 2016/07/20 17:24:02
Loading...